Mail.dat client errors
All 1,704 mail.dat client errors in the Mail.dat Technical Specification of October 5, 2026, each with what it means.Mail.dat Technical Specifications R65.0.0.0PDF page 280USPS original“For Mixed Full-Service Processing, the.seg Class Defining Preparation value provided was {}; it must contain 1=First class, 2=Periodicals, 3=Std mail, 4=Pkg Services, or 6= Std/Bound Printed Matter/Periodicals Co-Mailings.”
What it is
Each row gives a code, then these columns:Mail.dat Technical Specifications R65.0.0.0PDF page 280USPS original“For Mixed Full-Service Processing, the.seg Class Defining Preparation value provided was {}; it must contain 1=First class, 2=Periodicals, 3=Std mail, 4=Pkg Services, or 6= Std/Bound Printed Matter/Periodicals Co-Mailings.”
- message
- action
- error location
Every code
1,704 codes in the Mail.dat Client Error Messages, Mail.dat Technical Specification, October 5, 2026.
0002For Mixed Full-Service Processing, the.seg Class Defining Preparation value provided was {}; it must contain 1=First class, 2=Periodicals, 3=Std mail, 4=Pkg Services, or 6= Std/Bound Printed Matter/Periodicals Co-Mailings.Populate.seg Class Defining Preparation field with 1 = First Class, 2 = Periodicals, 3 = Std Mail, 4 = Pkg Services, or 6 = Std/Bound Printed Matter/Periodicals Co-Mailings. · .segAction: Populate.seg Class Defining Preparation field with 1 = First Class, 2 = Periodicals, 3 = Std Mail, 4 = Pkg Services, or 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Error location: .seg0003For Mixed Full-Service Processing, the .mpu Mail Piece Unit – Rate Type value provided was {1}; it must contain B = Bound Printed Matter, R = Regular (US/MEX/CAN), N = Nonprofit, S = Science of Agriculture, C = Classroom, W = Science of Agriculture Limited Circulation, Y = Regular Limited Circulation, or D = Parcel Select.Populate the .mpu Mail Piece Unit – Rate Type field with B, R, N, S, C, W, Y, or D. · .mpuAction: Populate the .mpu Mail Piece Unit – Rate Type field with B, R, N, S, C, W, Y, or D.Error location: .mpu0004For Mixed Full-Service Processing, the .mpu Mail Piece Unit – Processing Category value provided was {}; it must contain LT = Letters, FL = Flats, or CD = Cards.Populate .mpu Mail Piece Unit – Processing Category field with LT = Letters, FL = Flats, or CD = Cards. · .mpuAction: Populate .mpu Mail Piece Unit – Processing Category field with LT = Letters, FL = Flats, or CD = Cards.Error location: .mpu0006For Mixed Full-Service Processing, the .mpa Postage Payment Method contains an invalid value; it must contain P = Permit S = Stamp G = Govt – Fed (use Permit) L = Metered: Lowest C = Metered: Correct M = Metered: Neither or T = Per Pend (using Permit).Populate .mpa Postage Payment Method field with P, S, G, L, C, M or T. · .mpaAction: Populate .mpa Postage Payment Method field with P, S, G, L, C, M or T.Error location: .mpa0007The value provided For Mixed Full-Service Processing, the .cpt Component Class contains was {}; it must contain 1 = First Class 2 = Periodicals 3 = Std Mail 4 = Pkg Services or 5 = Per Pending.Populate the .cpt Component – Class field with 1, 2, 3, 4, or 5. · .cptAction: Populate the .cpt Component – Class field with 1, 2, 3, 4, or 5.Error location: .cpt0008The value provided For Mixed Full-Service Processing, the .cpt Component Rate Type was {} when the .seg Class Defining Preparation field is populated with 1 = First Class ; it must contain R = Regular (US/MEX/CAN) N = Nonprofit M = Repositionable Component I = First Class Permit Reply Mail or Z – Included, part of host postagePopulate .cpt Component – Rate Type field with R, N, M, I, or Z. · .cptAction: Populate .cpt Component – Rate Type field with R, N, M, I, or Z.Error location: .cpt0009The value provided For Mixed Full-Service Processing, the .cpt Component Rate Type was {} when the .seg Class Defining Preparation field is populated with 2 = Periodicals; it must contain R = Regular (US/MEX/CAN) N = Nonprofit S = Science of Agriculture C = Classroom W = Science of Agriculture Limited Circulation Y = Regular Limited Circulation H = Per Ride-Along Z – Included, part of host postage or M = Repositionable ComponentPopulate .cpt Component – Rate Type field with R, N, S, C, W, Y, H, Z or M. · .cptAction: Populate .cpt Component – Rate Type field with R, N, S, C, W, Y, H, Z or M.Error location: .cpt0012For MLOCR mailings, the jobs can only contain one segment record.Include only one segment record in data set. · .segAction: Include only one segment record in data set.Error location: .seg0013For MLOCR Mailings, the .seg Class Defining Preparation value provided was {1}; it must be populated with 1 = First Class or 3 = Standard Mail.Populate .seg Class Defining Preparation field with 1 = First Class or 3 = Standard Mail. · .segAction: Populate .seg Class Defining Preparation field with 1 = First Class or 3 = Standard Mail.Error location: .seg0017For MLOCR Mailings, the .mpu Mail Piece Unit – Weight must be less than or equal to 1 ounce when the .mpu Mail Piece Unit – Processing Category is populated with LT = Letters or CD = Cards, the .mpa Postage Payment Method is populated with S = Stamp, and the .mpu Mail Piece Unit – Class field is populated with populated with 1 = First Class. The value provided was {1}.Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 1 oz. · Multiple filesAction: Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 1 oz.Error location: Multiple files0018For MLOCR Mailings, the .mpu Mail Piece Unit – Weight must be less than or equal to 3.3 ounces when the .mpu Mail Piece Unit – Processing Category is populated with LT = Letters, the .mpa Postage Payment Method is populated with S = Stamp, and the .mpu Mail Piece Unit – Class field is populated with 3 = Std Mail. The value provided was {1}.Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 3.3 oz. · Multiple filesAction: Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 3.3 oz.Error location: Multiple files0020For MLOCR Mailings, the .mpu Mail Piece Unit – Weight must be less than or equal to 13 ounces when the .mpu Mail Piece Unit – Processing Category is populated with FL = Flats, the .mpa Postage Payment Method is populated with L, C, P, G or M, and the .mpu Mail Piece Unit – Class field is populated with 1. L = Metered: Lowest, C = Metered: Correct, P = Permit, G = Gov’t – Fed (use Permit), M = Metered: Neither, 1 = First Class. The value provided was {1}.Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 13 oz. · Multiple filesAction: Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 13 oz.Error location: Multiple files0021For MLOCR Mailings, the .mpu Mail Piece Unit – Weight must be less than or equal to 3.3 ounces when the .mpu Mail Piece Unit – Processing Category is populated with LT = Letters, the .mpa Postage Payment Method is populated with L, C, P, G or M, and the .mpu Mail Piece Unit – Class field is populated with populated with 3. L = Metered: Lowest, C = Metered: Correct, P = Permit, G = Gov’t – Fed (use Permit), M = Metered: Neither, 3 = Std Mail.Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 3.3 oz. · Multiple filesAction: Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 3.3 oz.Error location: Multiple files0022For MLOCR Mailings, there cannot be more than 13 different weight increments when the .mpa Postage Payment Method field is populated with P, the .seg Class Defining Preparation field is populated with 1= First Class, and the .mpu Mail Piece Unit – Processing Category field is populated with FL=Flats.Do not include more than 13 different weight increments when the .mpa Postage Payment Method field is populated with P, the .seg Class Defining Preparation field is populated with 1, and the .mpu Mail Piece Unit – Processing Category field is populated with FL. · Multiple filesAction: Do not include more than 13 different weight increments when the .mpa Postage Payment Method field is populated with P, the .seg Class Defining Preparation field is populated with 1, and the .mpu Mail Piece Unit – Processing Category field is populated with FL.Error location: Multiple files0027For MLOCR Mailings, the .seg Barcode Verifier Indicator field value provided was {1}; it must contain either Y = Yes or N = No.Populate .seg Barcode Verifier Indicator field with Y = Yes or N = No. · Multiple filesAction: Populate .seg Barcode Verifier Indicator field with Y = Yes or N = No.Error location: Multiple files0031For MLOCR Mailings, barcode data is not permitted in the .csm file when the .csm Container Type is set to M = Logical Pallet (MLOCR). The value provided was {1}.Do not include barcodes. · Multiple filesAction: Do not include barcodes.Error location: Multiple files0032For MLOCR Mailings, the .mpa Postage Payment Method field value provided was {1}; it must contain L = Metered: Lowest C = Metered: Correct P = Permit M = Metered: Neither G = Gov’t – Fed (use Permit) or S = Stamp when the .seg Class Defining Preparation field is populated with 1 = First Class and the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters or CD = Cards.Populate .mpa Postage Payment Method field with L, C, P, M, G, or S. · .mpaAction: Populate .mpa Postage Payment Method field with L, C, P, M, G, or S.Error location: .mpa0033For MLOCR Mailings, the .mpa Postage Payment Method field value provided was {1}; it must contain L = Metered: Lowest C = Metered: Correct P = Permit M = Metered: Neither G = Gov’t – Fed (use Permit) when the .mpu Mail piece Unit – Processing Category is populated with FL = Flats.Populate .mpa Postage Payment Method field with L, C, P, M, or G. · .mpaAction: Populate .mpa Postage Payment Method field with L, C, P, M, or G.Error location: .mpa0034For MLOCR Mailings, the .mpu Mail Piece Unit – Class must match the class in the associated .seg and .cpt file(s).Populate the .mpu Mail Piece Unit – Class field with a value that is identical to that in the .seg and .cpt files · Multiple filesAction: Populate the .mpu Mail Piece Unit – Class field with a value that is identical to that in the .seg and .cpt filesError location: Multiple files0035For MLOCR Mailings, which are not Simple Mailings, there must be at least one container quantity record present in .cqt file and one package quantity record in the .pqt file for each container summary record present in the .csm file when container type is populated with L for logical tray. The value provided was {1}.Include a .cqt record and .pqt record for each .csm record in a job, which is not a Simple Mailing. · Multiple filesAction: Include a .cqt record and .pqt record for each .csm record in a job, which is not a Simple Mailing.Error location: Multiple files0036For MLOCR Mailings, the .mcr Additional Postage MPA ID field must be populated when the .mpa Postage Payment Method field is populated with G = Gov’t – Fed (use Permit) S = Stamp C = Metered: Correct L = Metered: Lowest M = Metered: Neither .The value provided was {1}.Populate the .mcr Additional Postage MPA ID field when the .mpa Postage Payment Method field is populated with G, S, C, L, or M. · Multiple filesAction: Populate the .mcr Additional Postage MPA ID field when the .mpa Postage Payment Method field is populated with G, S, C, L, or M.Error location: Multiple files0039For MLOCR Mailings, there must be at least one .mpu Mail Piece Unit – Processing Category populated with LT = Letters, FL = Flats, or CD = Cards for each segment record. The value provided was {1}.Populate the .mpa Mail Piece Unit – Processing Category field with LT = Letters, FL = Flats, or CD = Cards. · Multiple filesAction: Populate the .mpa Mail Piece Unit – Processing Category field with LT = Letters, FL = Flats, or CD = Cards.Error location: Multiple files0045For File Cancellation or Deletion Processing, this job could not be cancelled/deleted because component equivalents in jobs [list job numbers] refer to this job.Do not attempt to cancel or delete a job when there are .cpt Equivalent Component IDs in other jobs that are referenced. · .cpt Multiple fieldsAction: Do not attempt to cancel or delete a job when there are .cpt Equivalent Component IDs in other jobs that are referenced.Error location: .cpt Multiple fields0047For .cpt File Processing, the following fields must all be populated for an equivalent component to be defined that is referencing a different job: .cpt Equivalent User License Code, .cpt Equivalent Component Mail.dat Job ID, and .cpt Equivalent Component ID.Populate the .cpt Equivalent User License Code, .cpt Equivalent Component Mail.dat Job ID, and .cpt Equivalent Component ID fields. · .cpt Multiple fieldsAction: Populate the .cpt Equivalent User License Code, .cpt Equivalent Component Mail.dat Job ID, and .cpt Equivalent Component ID fields.Error location: .cpt Multiple fields0048For .cpt File Processing, when an equivalent component is defined within the same job the equivalent component ID must match to another component ID in the .cpt file.Populate the .cpt Equivalent Component ID field with a value that exists in the .cpt Component ID field. · .cpt Multiple fieldsAction: Populate the .cpt Equivalent Component ID field with a value that exists in the .cpt Component ID field.Error location: .cpt Multiple fields0051The .cpt Job ID field does not match the .hdr Job ID field.Populate the .cpt Job ID field with a value that is identical to the .hdr Job ID field. · Multiple filesAction: Populate the .cpt Job ID field with a value that is identical to the .hdr Job ID field.Error location: Multiple files0052Required Field Missing: Job ID is a required field in the .cpt file.Populate the .cpt Job ID field. · .cptAction: Populate the .cpt Job ID field.Error location: .cpt0053Required Field Missing: Component ID is a required field in the .cpt file.Populate the .cpt Component ID field. · .cptAction: Populate the .cpt Component ID field.Error location: .cpt0054Component – Periodical Ad Percentage and the Periodical Ad Percentage Status fields are required in the .cpt file when the .cpt Periodical Ad % Treatment field is populated with S = Carries own Ad Percentage . The value provided was {1}.Populate the .cpt Component – Periodical Ad Percentage and Periodical Ad Percentage Status fields when the .cpt Periodical Ad% Treatment field is populated with S. · .cptAction: Populate the .cpt Component – Periodical Ad Percentage and Periodical Ad Percentage Status fields when the .cpt Periodical Ad% Treatment field is populated with S.Error location: .cpt0056Required Field Missing: Component Class is a required field in the .cpt file when .cpt Component Rate Type and .cpt Component Process Category are populated.Populate the .cpt Component – Class field when the .cpt Component – Rate Type and .cpt Component – Processing Category fields are populated. · .cptAction: Populate the .cpt Component – Class field when the .cpt Component – Rate Type and .cpt Component – Processing Category fields are populated.Error location: .cpt0057Required Field Missing: Component Rate Type is a required field in the .cpt file when .cpt Component Class and .cpt Component Process Category are populated.Populate the .cpt Component – Rate Type field when the .cpt Component – Class and .cpt Component – Processing Category fields are populated. · .cptAction: Populate the .cpt Component – Rate Type field when the .cpt Component – Class and .cpt Component – Processing Category fields are populated.Error location: .cpt0058Required Field Missing: Component Process Category is a required field in the .cpt file when .cpt Component Rate Type and .cpt Component Class are populated.Populate the .cpt Component – Processing Category field when the .cpt Component – Rate Type and .cpt Component – Class fields are populated. · .cptAction: Populate the .cpt Component – Processing Category field when the .cpt Component – Rate Type and .cpt Component – Class fields are populated.Error location: .cpt0059Required Field Missing: Periodical Issue Number is a required field in the .cpt file when .cpt Periodical Volume Number is populated.Populate the .cpt Periodical Issue Number field when the .cpt Periodical Volume Number field is populated. · .cptAction: Populate the .cpt Periodical Issue Number field when the .cpt Periodical Volume Number field is populated.Error location: .cpt0060Required Field Missing: CPT Record Status is a required field in the .cpt file.Populate the .cpt CPT Record Status field. · .cptAction: Populate the .cpt CPT Record Status field.Error location: .cpt0062Required Field Missing: Closing Character is a required field in the .cpt file.Populate the .cpt Closing Character field. · .cptAction: Populate the .cpt Closing Character field.Error location: .cpt0063Alphanumeric Data Type Error: Job ID must be an alphanumeric value in the .cpt file.Populate .cpt Job ID field with an alphanumeric value. · .cptAction: Populate .cpt Job ID field with an alphanumeric value.Error location: .cpt0064Alphanumeric Data Type Error: Component Description must be an alphanumeric value in the .cpt file.Populate .cpt Component Description field with an alphanumeric value. · .cptAction: Populate .cpt Component Description field with an alphanumeric value.Error location: .cpt0066The .cpt Mailer ID of Mail Owner field must be populated with an alphanumeric value.Populate .cpt Mailer ID of Mail Owner field with an alphanumeric value. · .cptAction: Populate .cpt Mailer ID of Mail Owner field with an alphanumeric value.Error location: .cpt0067The .cpt CRID of Mail Owner field must be populated with an alphanumeric value.Populate .cpt CRID of Mail Owner field with a numeric value. · .cptAction: Populate .cpt CRID of Mail Owner field with a numeric value.Error location: .cpt0069Alphanumeric Data Type Error: Periodical Volume Number must be an alphanumeric value in the .cpt file.Populate .cpt Periodical Volume Number field with an alphanumeric value. · .cptAction: Populate .cpt Periodical Volume Number field with an alphanumeric value.Error location: .cpt0070Alphanumeric Data Type Error: Periodical Issue Number must be an alphanumeric value in the .cpt file.Populate .cpt Periodical Issue Number field with an alphanumeric value. · .cptAction: Populate .cpt Periodical Issue Number field with an alphanumeric value.Error location: .cpt0071The .cpt Periodical Frequency field must be an alphanumeric value.Populate .cpt Periodical Frequency field with an alphanumeric value. · .cptAction: Populate .cpt Periodical Frequency field with an alphanumeric value.Error location: .cpt0073The .cpt Equivalent User License Code field must be populated with an alphanumeric value.Populate .cpt Equivalent User License Code field with an alphanumeric value. · .cptAction: Populate .cpt Equivalent User License Code field with an alphanumeric value.Error location: .cpt0074The .cpt Equivalent Mail.dat Job ID field must be populated with an alphanumeric value.Populate .cpt Weight Equivalent Mail.dat Job ID field with an alphanumeric value. · .cptAction: Populate .cpt Weight Equivalent Mail.dat Job ID field with an alphanumeric value.Error location: .cpt0075Alphanumeric Data Type Error: Weight Equivalent Component ID must be an alphanumeric value in the .cpt file.Populate .cpt Weight Equivalent Component ID field with an alphanumeric value. · .cptAction: Populate .cpt Weight Equivalent Component ID field with an alphanumeric value.Error location: .cpt0079The .cpt Component Title field must be populated with an alphanumeric value.Populate .cpt Component Title field with an alphanumeric value. · .cptAction: Populate .cpt Component Title field with an alphanumeric value.Error location: .cpt0080The .cpt User Option field must be populated with an alphanumeric value.Populate .cpt User Option field with an alphanumeric value. · .cptAction: Populate .cpt User Option field with an alphanumeric value.Error location: .cpt0081The .cpt Reserve field must be populated with an alphanumeric value.Populate .cpt Reserve field with an alphanumeric value. · .cptAction: Populate .cpt Reserve field with an alphanumeric value.Error location: .cpt0082Numeric Data Type Error: Component – Weight must be a numeric value in the .cpt file.Populate .cpt Component – Weight field with a numeric value. · .cptAction: Populate .cpt Component – Weight field with a numeric value.Error location: .cpt0083Numeric Data Type Error: Component – Length must be a numeric value in the .cpt file.Populate .cpt Component – Length field with a numeric value. · .cptAction: Populate .cpt Component – Length field with a numeric value.Error location: .cpt0084Numeric Data Type Error: Component – Width must be a numeric value in the .cpt file.Populate .cpt Component – Width field with a numeric value. · .cptAction: Populate .cpt Component – Width field with a numeric value.Error location: .cpt0085Numeric Data Type Error: Component – Thickness must be a numeric value in the .cpt file.Populate .cpt Component – Thickness field with a numeric value. · .cptAction: Populate .cpt Component – Thickness field with a numeric value.Error location: .cpt0086Numeric Data Type Error: Component – Periodical Ad Percentage must be a numeric value in the .cpt file.Populate .cpt Component – Periodical Ad Percentage field with a numeric value. · .cptAction: Populate .cpt Component – Periodical Ad Percentage field with a numeric value.Error location: .cpt0087Numeric Data Type Error: Ad % Basis must be a numeric value in the .cpt file.Populate .cpt Ad% Basis field with a numeric value. · .cptAction: Populate .cpt Ad% Basis field with a numeric value.Error location: .cpt0089Date Data Type Error: Periodical Issue Date must be a valid date formatted as YYYYMMDD in the .cpt file.Populate .seg Automation Coding Date field with a valid date formatted as YYYYMMDD. · .cptAction: Populate .seg Automation Coding Date field with a valid date formatted as YYYYMMDD.Error location: .cpt0090The value provided for the .cpt Component – Weight: Source field was {1}; it must contain A = Agent (real-time), C = Calculated (formula), P = Postal (clerk), or L = Logical (implied from rate).Populate the .cpt Component – Weight: Source field with A, C, P, or L. · .cptAction: Populate the .cpt Component – Weight: Source field with A, C, P, or L.Error location: .cpt0091The value provided for the .cpt Component – Weight: Status field was {1}; it must contain N = None Given, P = Pending, F = Final or M = Manifest Weight as function of Rate Interval (not actual).Populate the .cpt Component – Weight: Status field with N, P, F, or M. · .cptAction: Populate the .cpt Component – Weight: Status field with N, P, F, or M.Error location: .cpt0093The value provided for the .cpt Component – Class field was {1}; it must contain 1 = First Class 2 = Periodicals 3 = Std Mail 4 = Pkg Services 5 = Per Pending or 9 = Other.Populate the .cpt Component – Class field with 1, 2, 3, 4, 5, or 9. · .cptAction: Populate the .cpt Component – Class field with 1, 2, 3, 4, 5, or 9.Error location: .cpt0095The value provided for the .cpt Component – Processing Category field was {1}; for domestic mailings it must contain LT = Letter, FL = Flat, CD = Card, CM = Custom Mail, MP = Machinable Parcel, IR = Nonstandard Parcel, or PF = Parcel, First Class.Populate the .cpt Component – Processing Category field with LT, FL, CD, CM, MP, IR, or PF. · .cptAction: Populate the .cpt Component – Processing Category field with LT, FL, CD, CM, MP, IR, or PF.Error location: .cpt0097The value provided for the .cpt Periodical Ad % Treatment field was {1}; it must contain B = Ad % not counted, CPT weight added to base piece, S = Carries own Ad Percentage, or N = Not applicable when the .cpt Component – Periodical Ad Percentage field is populated.Populate the .cpt Periodical Ad% Treatment field with B, S, or N when the .cpt Component – Periodical Ad Percentage field is populated. · .cptAction: Populate the .cpt Periodical Ad% Treatment field with B, S, or N when the .cpt Component – Periodical Ad Percentage field is populated.Error location: .cpt0099The value provided for the .cpt Equivalent Component Type field was {1} ; it must contain W = Weight; B = Both Weight and Ad%; or Blank = None.Populate the .cpt Equivalent Component Type field with W, B, or leave blank. · .cptAction: Populate the .cpt Equivalent Component Type field with W, B, or leave blank.Error location: .cpt0101For .cpt File Processing, the .cpt Closing Character field contains an invalid value; it must contain #.Remove all characters after the .cpt Closing Character. · .cptAction: Remove all characters after the .cpt Closing Character.Error location: .cpt0110There can be no characters after the .cpt Closing Character.Remove all characters after the .cpt Closing Character. · .cptAction: Remove all characters after the .cpt Closing Character.Error location: .cpt0112Alphanumeric Data Type Error: MPA – Unique Sequence/Grouping ID must be an alphanumeric value in the .mpa file.Populate the .mpa MPA – Unique Sequence/Grouping ID field with an alphanumeric value. · Multiple filesAction: Populate the .mpa MPA – Unique Sequence/Grouping ID field with an alphanumeric value.Error location: Multiple files0113Required Field Missing: Job ID is a required field in the .mpa file.Populate the .mpa Job ID field. · .mpaAction: Populate the .mpa Job ID field.Error location: .mpa0114Required Field Missing: Unique Sequence/Grouping ID is a required field in the .mpa file.Populate that MPA Unique Sequence/Grouping ID field. · .mpaAction: Populate that MPA Unique Sequence/Grouping ID field.Error location: .mpa0115Required Field Missing: Permit ZIP+4 is a required field in the .mpa file.Populate the .mpa Permit ZIP+4 field. · .mpaAction: Populate the .mpa Permit ZIP+4 field.Error location: .mpa0116Required Field Missing: Postage Payment Option is a required field in the .mpa file.Populate the .mpa Postage Payment Option field. · .mpaAction: Populate the .mpa Postage Payment Option field.Error location: .mpa0119Required Field Missing: MPA Record Status is a required field in the .mpa file.Populate the .mpa MPA Record Status field. · .mpaAction: Populate the .mpa MPA Record Status field.Error location: .mpa0120Required Field Missing: Closing Character is a required field in the .mpa file.Populate the .mpa Closing Character field. · .mpaAction: Populate the .mpa Closing Character field.Error location: .mpa0121The .mpa Job ID field must be populated with an alphanumeric value.Populate the .mpa Job ID field with an alphanumeric value. · .mpaAction: Populate the .mpa Job ID field with an alphanumeric value.Error location: .mpa0123The .mpa MPA Description field must be populated with an alphanumeric value (when populated).Populate the .mpa MPA Description field with an alphanumeric value when populated. · .mpaAction: Populate the .mpa MPA Description field with an alphanumeric value when populated.Error location: .mpa0124The .mpa USPS Publication Number field must be populated with an alphanumeric value (when populated).Populate the .mpa USPS Publication Number field with an alphanumeric value when populated. · .mpaAction: Populate the .mpa USPS Publication Number field with an alphanumeric value when populated.Error location: .mpa0125The .mpa Permit Number field must be populated with an alphanumeric value (when populated).The .mpa Permit Number field must be populated with an alphanumeric value (when populated). · .mpaAction: The .mpa Permit Number field must be populated with an alphanumeric value (when populated).Error location: .mpa0128The .mpa Reserve field must be populated with an alphanumeric value (when populated).Populate the .mpa Reserve field with an alphanumeric value when populated. · .mpaAction: Populate the .mpa Reserve field with an alphanumeric value when populated.Error location: .mpa0133The .mpa Federal Agency Cost Code field must be populated with an alphanumeric value (when populated).Populate the .mpa Federal Agency Cost Code field with an alphanumeric value when populated. · .mpaAction: Populate the .mpa Federal Agency Cost Code field with an alphanumeric value when populated.Error location: .mpa0134The .mpa Non-Profit Authorization Number field must be populated with an alphanumeric value (when populated).Populate the .mpa Non-Profit Authorization Number field with an alphanumeric value when populated. · .mpaAction: Populate the .mpa Non-Profit Authorization Number field with an alphanumeric value when populated.Error location: .mpa0135The .mpa Title field must be populated with an alphanumeric value (when populated).Populate the .mpa Title field with an alphanumeric value when populated. · .mpaAction: Populate the .mpa Title field with an alphanumeric value when populated.Error location: .mpa0136Numeric Data Type Error: Mailer ID of Mail Owner must be a numeric value in the .mpa file (when populated).Populate the .mpa Mailer ID of Mail Owner field with a numeric value when populated. · .mpaAction: Populate the .mpa Mailer ID of Mail Owner field with a numeric value when populated.Error location: .mpa0137Numeric Data Type Error: CRID of Mail Owner must be a numeric value in the .mpa file (when populated).Populate the .mpa CRID of Mail Owner field with a numeric value when populated. · .mpaAction: Populate the .mpa CRID of Mail Owner field with a numeric value when populated.Error location: .mpa0138Numeric Data Type Error: Mailer ID of Preparer must be a numeric value in the .mpa file (when populated).Populate the .mpa Mailer ID of Preparer field with a numeric value when populated. · .mpaAction: Populate the .mpa Mailer ID of Preparer field with a numeric value when populated.Error location: .mpa0139Numeric Data Type Error: CRID of Preparer must be a numeric value in the .mpa file (when populated).Populate the .mpa CRID of Preparer field with a numeric value when populated. · .mpaAction: Populate the .mpa CRID of Preparer field with a numeric value when populated.Error location: .mpa0140The .mpa User Option Field must be populated with an alphanumeric value (when populated).Populate the .mpa User Option Field with an alphanumeric value when populated. · .mpaAction: Populate the .mpa User Option Field with an alphanumeric value when populated.Error location: .mpa0141The .mpa Mail Owner’s Lcl Permit Ref Num/Int’l Bill Num field must be populated with a numeric value (when populated).Populate the .mpa Mail Owner’s Lcl Permit Ref Num/Int’l Bill Num field with a numeric value when populated. · .mpaAction: Populate the .mpa Mail Owner’s Lcl Permit Ref Num/Int’l Bill Num field with a numeric value when populated.Error location: .mpa0144The .mpa Mail Owner’s Lcl Permit Ref Num/Int’l Bill Num – Type field contains an invalid value; it must contain S = Stamp M = Meter P = Permit G = Gov’t – Fed (using Permit) V = Virtual Reference Number or H = Government Meter. The value provided was {1}.Populate the .mpa Mail Owner’s Lcl Permit Ref Num/Int’l Bill Num – Type field with S, M, P, G, V, or H when populated. · .mpaAction: Populate the .mpa Mail Owner’s Lcl Permit Ref Num/Int’l Bill Num – Type field with S, M, P, G, V, or H when populated.Error location: .mpa0145The .mpa Postage Payment Option field value provided was {1}; it must contain C = CPP V = PVDS T = EPS D = Debit O = Other or B = Billing(when populated).Populate the .mpa Postage Payment Option field with C, V, T, D, O, or B when populated. · .mpaAction: Populate the .mpa Postage Payment Option field with C, V, T, D, O, or B when populated.Error location: .mpa0146The .mpa Postage Payment Method field value provided was {1}; it must contain S = Stamp, M = Metered: Neither, P = Permit, I = Partial Permit Imprint, T = Per Pend (using permit), G = Gov’t – Fed (use permit), L = Metered: Lowest, or C = Metered: Correct.Populate the .mpa Postage Payment Method field with S, M, P, I, T, G, L, or C. · .mpaAction: Populate the .mpa Postage Payment Method field with S, M, P, I, T, G, L, or C.Error location: .mpa0151The .mpa MPA Record Status field value provided was {1}; it must contain O = Original , D = Delete or U = Update.Populate the .mpa MPA Record Status field with O, D, or U. · .mpaAction: Populate the .mpa MPA Record Status field with O, D, or U.Error location: .mpa0152The .mpa Permit ZIP+4 field is not valid, update to a valid value.Populate the .mpa Permit ZIP+4 field with a .mpa Permit Number at a Post Office location. · .mpaAction: Populate the .mpa Permit ZIP+4 field with a .mpa Permit Number at a Post Office location.Error location: .mpa0154There is an invalid .mpa Permit Number and .mpa Postage Payment Method combination; the Permit Number must reference an active permit for the associated payment method at the .mpa Permit ZIP+4 code in the .mpa file.Populate the .mpa Permit Number field with a Permit Number that references an active permit for the associated .mpa Postage Payment Method. · .mpaAction: Populate the .mpa Permit Number field with a Permit Number that references an active permit for the associated .mpa Postage Payment Method.Error location: .mpa0155The .mpa Closing Character field provided was {1}; it must be a #.Populate the .mpa Closing Character field with #. · .mpaAction: Populate the .mpa Closing Character field with #.Error location: .mpa0156Required Field Missing: Mail Owner’s Lcl Permit Ref Num/ Int’l Bill Num – Type is a required field when Mail Owner’s Lcl Permit Ref Num/ Int’l Bill Num is populated.Populate the .mpa Mail Owner’s Lcl Permit Ref Num/Int’l Bill Num – Type field when the .mpa Mail Owner’s Lcl Permit Ref Num/ Int’l Bill Num field is populated. · .mpa Multiple fieldsAction: Populate the .mpa Mail Owner’s Lcl Permit Ref Num/Int’l Bill Num – Type field when the .mpa Mail Owner’s Lcl Permit Ref Num/ Int’l Bill Num field is populated.Error location: .mpa Multiple fields0158Only one field between the .mpa USPS Publication Number and .mpa Permit Number may be populated in one record.Populate either the .mpa USPS Publication Number field or the .mpa Permit Number field. · .mpa Multiple fieldsAction: Populate either the .mpa USPS Publication Number field or the .mpa Permit Number field.Error location: .mpa Multiple fields0160For .mpa File Processing, the Permit ZIP+4 must map back to a single finance number for all permits on which the postage is charged and no .mpa Payment Account Number is identified.Either populate the .mpa Permit ZIP+4 field with a value that maps back to a single finance number or populate the .mpa Payment Account Number. · Multiple filesAction: Either populate the .mpa Permit ZIP+4 field with a value that maps back to a single finance number or populate the .mpa Payment Account Number.Error location: Multiple files0164There must be no characters after the .mpa Closing Character.Remove all characters after the .mpa Closing Character. · .mpaAction: Remove all characters after the .mpa Closing Character.Error location: .mpa0224Required Field Missing: Job ID is a required field in the .pdr file.Populate the .pdr Job ID field. · .pdrAction: Populate the .pdr Job ID field.Error location: .pdr0225Required Field Missing: CQT Database ID is a required field in the .pdr file.Populate the .pdr CQT Database ID field. · .pdrAction: Populate the .pdr CQT Database ID field.Error location: .pdr0226Required Field Missing: Package ID is a required field in the .pdr file.Populate the .pdr Package ID field. · .pdrAction: Populate the .pdr Package ID field.Error location: .pdr0228Required Field Missing: PDR Record Status is a required field in the .pdr file.Populate the .pdr PDR Record Status field. · .pdrAction: Populate the .pdr PDR Record Status field.Error location: .pdr0229Required Field Missing: Closing Character is a required field in the .pdr file.Populate the .pdr Closing Character field. · .pdrAction: Populate the .pdr Closing Character field.Error location: .pdr0230Job ID must be populated with an alphanumeric value in the .pdr file.Populate the .pdr Job ID field with an alphanumeric value. · .pdrAction: Populate the .pdr Job ID field with an alphanumeric value.Error location: .pdr0231The .pdr Package ID field must be populated with an alphanumeric value.Populate the .pdr Package ID field with an alphanumeric value. · .pdrAction: Populate the .pdr Package ID field with an alphanumeric value.Error location: .pdr0232The .pdr Piece Barcode field must be populated with an alphanumeric value.Populate the .pdr Piece Barcode field with an alphanumeric value. · .pdrAction: Populate the .pdr Piece Barcode field with an alphanumeric value.Error location: .pdr0234The .pdr USPS Signature Tracking ID field must be populated with an alphanumeric value (when populated).Populate the .pdr USPS Signature Tracking ID field with an alphanumeric value when populated. · .pdrAction: Populate the .pdr USPS Signature Tracking ID field with an alphanumeric value when populated.Error location: .pdr0237The .pdr Machine ID field must be populated with an alphanumeric value (when populated).Populate the .pdr Machine ID field with an alphanumeric value when populated. · .pdrAction: Populate the .pdr Machine ID field with an alphanumeric value when populated.Error location: .pdr0238The .pdr Mailer ID of Barcode Applicator field must be populated with an alphanumeric value (when populated).Populate the .pdr Mailer ID of Barcode Applicator field with an alphanumeric value when populated. · .pdrAction: Populate the .pdr Mailer ID of Barcode Applicator field with an alphanumeric value when populated.Error location: .pdr0241The .pdr IM Barcode field must be populated with an alphanumeric value (when populated).Populate the .pdr IM Barcode field with an alphanumeric value when populated. · .pdrAction: Populate the .pdr IM Barcode field with an alphanumeric value when populated.Error location: .pdr0242The .pdr CQT Database ID field must be populated with a numeric value.Populate the .pdr CQT Database ID field with a numeric value. · .pdrAction: Populate the .pdr CQT Database ID field with a numeric value.Error location: .pdr0244Numeric Data Type Error: Mailer ID of Mail Owner must be a numeric value in the .pdr file (when populated)..pdrError location: .pdr0246The .pdr Line-Of-Travel Sequence Number field must be populated with a numeric value (when populated).Populate the .pdr Line-Of-Travel Sequence Number field with a numeric value when populated. · .pdrAction: Populate the .pdr Line-Of-Travel Sequence Number field with a numeric value when populated.Error location: .pdr0247The .pdr Walk Sequence Number must be populated with a numeric value (when populated).Populate the .pdr Walk Sequence Number field with a numeric value when populated. · .pdrAction: Populate the .pdr Walk Sequence Number field with a numeric value when populated.Error location: .pdr0251For .pdr File Processing, the .pdr Piece Barcode contains an invalid value; it must contain a 5, 9, or 11 digit value (when populated).Populate the .pdr Piece Barcode field with a 5, 9, or 11 digit value when populated. · .pdrAction: Populate the .pdr Piece Barcode field with a 5, 9, or 11 digit value when populated.Error location: .pdr0254The .pdr Wasted or Shortage Piece Indicator field value provided was {1}; it must contain W = Wasted piece produced but was spoiled, S = Shortage – piece NOT produced, X = Wasted piece and postage adjustment should NOT be triggered, or T = Shortage pieces not produced and postage adjustment should NOT be triggered (when populated).Populate the .pdr Wasted or Shortage Piece Indicator field with W, S, X, or T (when populated). · .pdrAction: Populate the .pdr Wasted or Shortage Piece Indicator field with W, S, X, or T (when populated).Error location: .pdr0255The Wasted Piece Indicator contains an invalid value; it must contain Y or Blank..pdrError location: .pdr0256The .pdr PDR Record Status value provided was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .pdr PDR Record Status field with O = Original, D = Delete, I = Insert, or U = Update. · .pdrAction: Populate the .pdr PDR Record Status field with O = Original, D = Delete, I = Insert, or U = Update.Error location: .pdr0259The .pdr Closing Character value provided was {1}; it must contain #.Populate the .pdr Closing Character field with #. · .pdrAction: Populate the .pdr Closing Character field with #.Error location: .pdr0263There can be no characters after the .pdr Closing Character.Remove all characters after the .pdr Closing Character. · .pdrAction: Remove all characters after the .pdr Closing Character.Error location: .pdr0402Required Field Missing: Job ID is a required field in the .hdr file.Populate the .hdr Job ID field. · .hdrAction: Populate the .hdr Job ID field.Error location: .hdr0404Required Field Missing: Header History Sequence Number is a required field in the .hdr file.Populate the .hdr Header History Sequence Number field. · .hdrAction: Populate the .hdr Header History Sequence Number field.Error location: .hdr0405Required Field Missing: Header History Status is a required field in the .hdr file.Populate the .hdr Header History Status field. · .hdrAction: Populate the .hdr Header History Status field.Error location: .hdr0406Required Field Missing: Historical Job ID is a required field in the .hdr file.Populate the .hdr Historical Job ID field. · .hdrAction: Populate the .hdr Historical Job ID field.Error location: .hdr0408Required Field Missing: Job Name/Title and Issue is a required field in the .hdr file.Populate the .hdr Job Name/Title field. · .hdrAction: Populate the .hdr Job Name/Title field.Error location: .hdr0409Required Field Missing: File Source is a required field in the .hdr file.Populate the .hdr File Source field. · .hdrAction: Populate the .hdr File Source field.Error location: .hdr0411Required Field Missing: Contact Name is a required field in the .hdr file.Populate the .hdr Contact Name field. · .hdrAction: Populate the .hdr Contact Name field.Error location: .hdr0412Required Field Missing: Contact Telephone Number is a required field in the .hdr file.Populate the .hdr Contact Telephone Number field. · .hdrAction: Populate the .hdr Contact Telephone Number field.Error location: .hdr0413Required Field Missing: Date Prepared is a required field in the .hdr file.Populate the .hdr Date Prepared field. · .hdrAction: Populate the .hdr Date Prepared field.Error location: .hdr0414Required Field Missing: Time Prepared is a required field in the .hdr file.Populate the .hdr Time Prepared field. · .hdrAction: Populate the .hdr Time Prepared field.Error location: .hdr0416Required Field Missing: Segment Record Count is a required field in the .hdr file.Populate the .hdr Segment Record Count field. · .hdrAction: Populate the .hdr Segment Record Count field.Error location: .hdr0417Required Field Missing: Segment File Status is a required field in the .hdr file.Populate the .hdr Segment File Status field. · .hdrAction: Populate the .hdr Segment File Status field.Error location: .hdr0418Required Field Missing: Mail Piece Unit Record Count is a required field in the .hdr file.Populate the .hdr Mail Piece Unit Record Count field. · .hdrAction: Populate the .hdr Mail Piece Unit Record Count field.Error location: .hdr0419Required Field Missing: Mail Piece Unit File Status is a required field in the .hdr file.Populate the .hdr Mail Piece Unit File Status field. · .hdrAction: Populate the .hdr Mail Piece Unit File Status field.Error location: .hdr0420MPU Mail piece unit/C Component Relationship Record Count is a required field in the .hdr file.Populate the .hdr MPU / C Relationship Record Count field. · .hdrAction: Populate the .hdr MPU / C Relationship Record Count field.Error location: .hdr0421MPU Mail piece unit/C Component Relationship File Status is a required field in the .hdr file.Populated the .hdr MPU / C Relationship File Status field. · .hdrAction: Populated the .hdr MPU / C Relationship File Status field.Error location: .hdr0422Required Field Missing: Mailer Postage Account Record Count is a required field in the .hdr file.Populate the .hdr Mailer Postage Account Record Count Field. · .hdrAction: Populate the .hdr Mailer Postage Account Record Count Field.Error location: .hdr0423Required Field Missing: Mailer Postage Account File Status is a required field in the .hdr file.Populate the .hdr Mailer Postage Account File Status field. · .hdrAction: Populate the .hdr Mailer Postage Account File Status field.Error location: .hdr0424Required Field Missing: Component Record Count is a required field in the .hdr file.Populate the .hdr Component Record Count field. · .hdrAction: Populate the .hdr Component Record Count field.Error location: .hdr0425Required Field Missing: Component File Status is a required field in the .hdr file.Populate the .hdr Component File Status field. · .hdrAction: Populate the .hdr Component File Status field.Error location: .hdr0428Required Field Missing: Container Quantity Record Count is a required field in the .hdr file.Populate the .hdr Container Quantity Record Count field. · .hdrAction: Populate the .hdr Container Quantity Record Count field.Error location: .hdr0429Required Field Missing: Container Quantity File Status is a required field in the .hdr file.Populate the .hdr Container Quantity File Status field. · .hdrAction: Populate the .hdr Container Quantity File Status field.Error location: .hdr0430Required Field Missing: Package Quantity Record Count is a required field in the .hdr file.Populate the .hdr Package Quantity Record Count field. · .hdrAction: Populate the .hdr Package Quantity Record Count field.Error location: .hdr0431Required Field Missing: Package Quantity File Status is a required field in the .hdr file.Populate the .hdr Package Quantity File Status field. · .hdrAction: Populate the .hdr Package Quantity File Status field.Error location: .hdr0432Required Field Missing: Walk Sequence Record Count is a required field in the .hdr file.Populate the .hdr Walk Sequence Record Count field. · .hdrAction: Populate the .hdr Walk Sequence Record Count field.Error location: .hdr0433Required Field Missing: Walk Sequence File Status is a required field in the .hdr file.Populate the .hdr Walk Sequence File Status field. · .hdrAction: Populate the .hdr Walk Sequence File Status field.Error location: .hdr0434Required Field Missing: Special Fee/Charge Barcode Record Count is a required field in the .hdr file.Populate the .hdr Special Fee/Charge Barcode Record Count field. · .hdrAction: Populate the .hdr Special Fee/Charge Barcode Record Count field.Error location: .hdr0435Required Field Missing: Special Fee/Charge Barcode Status is a required field in the .hdr file.Populate the .hdr Special Fee/Charge Barcode Status field. · .hdrAction: Populate the .hdr Special Fee/Charge Barcode Status field.Error location: .hdr0436Required Field Missing: Piece Detail Record Count is a required field in the .hdr file.Populate the .hdr Piece Detail Record Count field. · .hdrAction: Populate the .hdr Piece Detail Record Count field.Error location: .hdr0437Required Field Missing: Piece Detail File Status is a required field in the .hdr file.Populate the .hdr Piece Detail File Status field. · .hdrAction: Populate the .hdr Piece Detail File Status field.Error location: .hdr0438Required Field Missing: Special Fee/Charge Record Count is a required field in the .hdr file.Populate the .hdr Special Fee/Charge Record Count field. · .hdrAction: Populate the .hdr Special Fee/Charge Record Count field.Error location: .hdr0439Required Field Missing: Special Fee/Charge File Status is a required field in the .hdr file.Populate the .hdr Special Fee/Charge File Status field. · .hdrAction: Populate the .hdr Special Fee/Charge File Status field.Error location: .hdr0445Required Field Missing: Postage Adjustment File Status is a required field in the .hdr file.Populate the .hdr Postage Adjustment File Status field. · .hdrAction: Populate the .hdr Postage Adjustment File Status field.Error location: .hdr0450Required Field Missing: Original Container Identification Record Count is a required field in the .hdr file.Populate the .hdr Original Container Identification Record Count field. · .hdrAction: Populate the .hdr Original Container Identification Record Count field.Error location: .hdr0451Mail.dat Presentation Category is a required field in the .hdr file. The .hdr Mail.dat Presentation Category value provided was {1} ; it must contain M = MLOCR P = Conventional Presort.Populate the .hdr Mail.dat Presentation Category field. · .hdrAction: Populate the .hdr Mail.dat Presentation Category field.Error location: .hdr0452Required Field Missing: Original Software Vendor Name is a required field in the .hdr file.Populate the .hdr Original Software Vendor Name field. · .hdrAction: Populate the .hdr Original Software Vendor Name field.Error location: .hdr0453Required Field Missing: Original Software Products Name is a required field in the .hdr file.Populate the .hdr Original Software Products Name field. · .hdrAction: Populate the .hdr Original Software Products Name field.Error location: .hdr0454Required Field Missing: Original Software Version is a required field in the .hdr file.Populate the .hdr Original Software Version field. · .hdrAction: Populate the .hdr Original Software Version field.Error location: .hdr0455Original Software Vendor’s Email is a required field in the .hdr file.Populate the .hdr Original Software Vendor’s Email field. · .hdrAction: Populate the .hdr Original Software Vendor’s Email field.Error location: .hdr0456Required Field Missing: Mail.dat Software Vendor Name is a required field in the .hdr file.Populate the .hdr Mail.dat Software Vendor Name field. · .hdrAction: Populate the .hdr Mail.dat Software Vendor Name field.Error location: .hdr0457Required Field Missing: Mail.dat Software Product’s Name is a required field in the .hdr file.Populate the .hdr Mail.dat Software Product’s Name field. · .hdrAction: Populate the .hdr Mail.dat Software Product’s Name field.Error location: .hdr0459Required Field Missing: Contact Email is a required field in the .hdr file.Populate the .hdr Contact Email field. · .hdrAction: Populate the .hdr Contact Email field.Error location: .hdr0460Required Field Missing: Closing Character is a required field in the .hdr file.Populate the .hdr Closing Character field. · .hdrAction: Populate the .hdr Closing Character field.Error location: .hdr0461Alphanumeric Data Type Error: Job ID must be an alphanumeric value in the .hdr file.Populate the .hdr Job ID field with an alphanumeric value. · .hdrAction: Populate the .hdr Job ID field with an alphanumeric value.Error location: .hdr0462Alphanumeric Data Type Error: Historical Job ID must be an alphanumeric value in the .hdr file.Populate the .hdr Historical Job ID field with an alphanumeric value. · .hdrAction: Populate the .hdr Historical Job ID field with an alphanumeric value.Error location: .hdr0463Alphanumeric Data Type Error: Licensed User’s Job Number must be an alphanumeric value in the .hdr file.Populate the .hdr Licensed User’s Job Number field with an alphanumeric value. · .hdrAction: Populate the .hdr Licensed User’s Job Number field with an alphanumeric value.Error location: .hdr0464Alphanumeric Data Type Error: Job Name/Title and Issue must be an alphanumeric value in the .hdr file.Populate the .hdr Job Name/Title field with an alphanumeric value. · .hdrAction: Populate the .hdr Job Name/Title field with an alphanumeric value.Error location: .hdr0465Alphanumeric Data Type Error: File Source must be an alphanumeric value in the .hdr file.Populate the .hdr File Source field with an alphanumeric value. · .hdrAction: Populate the .hdr File Source field with an alphanumeric value.Error location: .hdr0469Alphanumeric Data Type Error: Original Software Vendor Name must be an alphanumeric value in the .hdr file.Populate the .hdr Original Software Vendor Name field with an alphanumeric value. · .hdrAction: Populate the .hdr Original Software Vendor Name field with an alphanumeric value.Error location: .hdr0470Alphanumeric Data Type Error: Original Software Product Name must be an alphanumeric value in the .hdr file.Populate the .hdr Original Software Products Name field with an alphanumeric value. · .hdrAction: Populate the .hdr Original Software Products Name field with an alphanumeric value.Error location: .hdr0472Alphanumeric Data Type Error: Original Software Vendor’s Email must be an alphanumeric value in the .hdr file; following the format xxxxx@xxxx.xxx.Populate the .hdr Original Software Vendor’s Email field with an alphanumeric value formatted as xxxxx@xxxx.xxx. · .hdrAction: Populate the .hdr Original Software Vendor’s Email field with an alphanumeric value formatted as xxxxx@xxxx.xxx.Error location: .hdr0473Alphanumeric Data Type Error: Mail.dat Software Vendor Name must be an alphanumeric value in the .hdr file.Populate the .hdr Mail.dat Software Vendor Name field with an alphanumeric value. · .hdrAction: Populate the .hdr Mail.dat Software Vendor Name field with an alphanumeric value.Error location: .hdr0474Alphanumeric Data Type Error: Mail.dat Software Product’s Name must be an alphanumeric value in the .hdr file.Populate the .hdr Mail.dat Software Product’s Name field with an alphanumeric value. · .hdrAction: Populate the .hdr Mail.dat Software Product’s Name field with an alphanumeric value.Error location: .hdr0475Alphanumeric Data Type Error: Mail.dat Software Version must be an alphanumeric value in the .hdr file.Populate the .hdr Mail.dat Software Version field with an alphanumeric value. · .hdrAction: Populate the .hdr Mail.dat Software Version field with an alphanumeric value.Error location: .hdr0476Alphanumeric Data Type Error: Mail.dat Software Vendor’s Email must be an alphanumeric value in the .hdr file.Populate the .hdr Mail.dat Software Vendor’s Email field with an alphanumeric value formatted as xxxxx@xxxx.xxx. · .hdrAction: Populate the .hdr Mail.dat Software Vendor’s Email field with an alphanumeric value formatted as xxxxx@xxxx.xxx.Error location: .hdr0477Alphanumeric Data Type Error: Contact Email must be expressed in valid email format (i.e. userid@hostname.domain) in the .hdr file.Populate the .hdr Contact Email field with an alphanumeric value formatted as xxxxx@xxxx.xxx. · .hdrAction: Populate the .hdr Contact Email field with an alphanumeric value formatted as xxxxx@xxxx.xxx.Error location: .hdr0479Alphanumeric Data Type Error: User Option must be an alphanumeric value in the .hdr file.Populate the .hdr User Option Field with an alphanumeric value. · .hdrAction: Populate the .hdr User Option Field with an alphanumeric value.Error location: .hdr0480Alphanumeric Data Type Error: Reserve must be an alphanumeric value in the .hdr file..hdrError location: .hdr0482Numeric Data Type Error: Header History Sequence Number must be a numeric value in the .hdr file.Populate the .hdr Header History Sequence Number field with a numeric value. · .hdrAction: Populate the .hdr Header History Sequence Number field with a numeric value.Error location: .hdr0484Numeric Data Type Error: Segment Record Count must be a numeric value in the .hdr file.Populate the .hdr Segment Record Count field with a numeric value. · .hdrAction: Populate the .hdr Segment Record Count field with a numeric value.Error location: .hdr0485Numeric Data Type Error: Mail Piece Unit Record Count must be a numeric value in the .hdr file.Populate the .hdr Mail Piece Unit Record Count field with a numeric value. · .hdrAction: Populate the .hdr Mail Piece Unit Record Count field with a numeric value.Error location: .hdr0486The .hdr MPU(Mail piece unit / C component ID Relationship Record Count field must be populated with a numeric value.Populate MPU/C Relationship Record Count with a numeric value. · .hdrAction: Populate MPU/C Relationship Record Count with a numeric value.Error location: .hdr0487Numeric Data Type Error: Mailer Postage Account Record Count must be a numeric value in the .hdr file.Populate the .hdr Mailer Postage Record Count field with a numeric value. · .hdrAction: Populate the .hdr Mailer Postage Record Count field with a numeric value.Error location: .hdr0488Numeric Data Type Error: Component Record Count must be a numeric value in the .hdr file.Populate the .hdr Component Record Count field with a numeric value. · .hdrAction: Populate the .hdr Component Record Count field with a numeric value.Error location: .hdr0489Numeric Data Type Error: Container Summary Record Count must be a numeric value in the .hdr file.Populate the .hdr Container Summary Record Count field with a numeric value. · .hdrAction: Populate the .hdr Container Summary Record Count field with a numeric value.Error location: .hdr0490Numeric Data Type Error: Container Quantity Record Count must be a numeric value in the .hdr file.Populate the .hdr Container Quantity Record Count field with a numeric value. · .hdrAction: Populate the .hdr Container Quantity Record Count field with a numeric value.Error location: .hdr0491Numeric Data Type Error: Package Quantity Record Count must be a numeric value in the .hdr file.Populate the .hdr Package Quantity Record Count field with a numeric value. · .hdrAction: Populate the .hdr Package Quantity Record Count field with a numeric value.Error location: .hdr0492Numeric Data Type Error: Walk Sequence Record Count must be a numeric value in the .hdr file.Populate the .hdr Walk Sequence Record Count field with a numeric value. · .hdrAction: Populate the .hdr Walk Sequence Record Count field with a numeric value.Error location: .hdr0493Numeric Data Type Error: Special Fee/Charge Barcode Record Count must be a numeric value in the .hdr file.Populate the .hdr Special Fee/Charge Barcode Record Count field with a numeric value. · .hdrAction: Populate the .hdr Special Fee/Charge Barcode Record Count field with a numeric value.Error location: .hdr0494Numeric Data Type Error: Piece Detail Record Count must be a numeric value in the .hdr file.Populate the .hdr Piece Detail Record Count field with a numeric value. · .hdrAction: Populate the .hdr Piece Detail Record Count field with a numeric value.Error location: .hdr0495Numeric Data Type Error: Special Fee/Charge Record Count must be a numeric value in the .hdr file.Populate the .hdr Special Fee/Charge Record Count field with a numeric value. · .hdrAction: Populate the .hdr Special Fee/Charge Record Count field with a numeric value.Error location: .hdr0498Numeric Data Type Error: Postage Adjustment Record Count must be a numeric value in the .hdr file.Populate the .hdr Postage Adjustment Record Count field with a numeric value. · .hdrAction: Populate the .hdr Postage Adjustment Record Count field with a numeric value.Error location: .hdr0501Numeric Data Type Error: Original Container Identification Record Count must be a numeric value in the .hdr file.Populate the .hdr Original Container Identification Record Count field with a numeric value. · .hdrAction: Populate the .hdr Original Container Identification Record Count field with a numeric value.Error location: .hdr0503Date Prepared is a required field in the .hdr file. The .hdr Date Prepared field must be populated with a valid date value formatted as YYYYMMDD.Populate the .hdr Date Prepared field with a valid date formatted as YYYYMMDD. · .hdrAction: Populate the .hdr Date Prepared field with a valid date formatted as YYYYMMDD.Error location: .hdr0505The .hdr Time Prepared field must be populated with an alphanumeric value formatted as HH:MM.Populate the .hdr Time Prepared field with an alphanumeric value formatted as HH:MM. · .hdrAction: Populate the .hdr Time Prepared field with an alphanumeric value formatted as HH:MM.Error location: .hdr0509Header History Status is a required field in the .hdr file. The .hdr Header History Status value provided was {1}; one record must contain C = Current.Populate the .hdr Header History Status field with C = Current for one record in the file. · .hdrAction: Populate the .hdr Header History Status field with C = Current for one record in the file.Error location: .hdr0510For .hdr File Processing, the .hdr User License Code contains an invalid value; it must begin with an alphabetic character.Populate the .hdr User License Code field with a value that begins with an alphabetic character. · .hdrAction: Populate the .hdr User License Code field with a value that begins with an alphabetic character.Error location: .hdr0511For .hdr File Processing, the .hdr User License Code cannot contain any spaces or special characters and it cannot be case sensitive.Populate the .hdr User License Code field with a value that does not include spaces or special characters and is not case sensitive. · .hdrAction: Populate the .hdr User License Code field with a value that does not include spaces or special characters and is not case sensitive.Error location: .hdr0516The .hdr Segment File Status field value provided was {1}; it must contain O = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Segment File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Segment File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0517Mail Piece Unit File Status is a required field in the .hdr file. The .hdr Mail Piece Unit File Status field value provided was {1}; it must contain O = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Mail Piece Unit File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Mail Piece Unit File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0518The .hdr MPU / C Relationship File Status field value provide was {1}; it must contain O = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr MPU / C Relationship File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr MPU / C Relationship File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0519The .hdr Mailer Postage Account File Status field value provided was {1}; it must contain O = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Mailer Postage Account File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Mailer Postage Account File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0520Component File Status is a required field in the .hdr file. The .hdr Component File Status field value provided was {1}; it must contain O = original, N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Component File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Component File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0521Container Summary File Status is a required field in the .hdr file. The .hdr Container Summary File Status field value provided was {1}; it must contain O = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update individual Records.Populate the .hdr Container Summary File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Container Summary File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0522Container Quantity File Status is a required field in the .hdr file. The .hdr Container Quantity File Status field value provided was {1}; it must contain O = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Up.Populate the .hdr Container Quantity File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Container Quantity File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0523The .hdr Package Quantity File Status field value provided was {1}; it must contain O = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Package Quantity File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Package Quantity File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0524The .hdr Walk Sequence File Status field value provided was {1}; it must contain O = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Walk Sequence File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Walk Sequence File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0526The .hdr Piece Detail File Status field value provided was {1};it must contain O = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Piece Detail File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Piece Detail File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0527The .hdr Special Fee/Charge File Status field value provided was {1}; it must contain O = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Special Fee/Charge File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Special Fee/Charge File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0530The .hdr Postage Adjustment File Status field value provided was {1}; it must contain O = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Postage Adjustment File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Postage Adjustment File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0531The .hdr Special Fee/Charge Barcode Status field value provided was {1}; it must contain O = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Special Fee/Charge Barcode Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Special Fee/Charge Barcode Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0533The .hdr Original Container Identification File Status field value provided was {1}; it must contain = original , N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Original Container Identification File Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Original Container Identification File Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr0534Mail.dat Presentation Category is a required field in the .hdr file. The .hdr Mail.dat Presentation Category value provided was {1}; it must contain M = MLOCR, P = Conventional Presort, N = Single Piece, C = Consolidated Internal Copal job with MLOCR and Conventional Presort, E = Consolidated External Copal Job with MLOCR and Conventional Presort, I = Informed Delivery, or T = Transportation Communication.Update the .hdr Presentation Category to M, P, N, C, E, I, or T. · .hdrAction: Update the .hdr Presentation Category to M, P, N, C, E, I, or T.Error location: .hdr0535The .hdr Closing Character provided value was {1}; it must contain #.Populate the .hdr Closing Character field with #. · .hdrAction: Populate the .hdr Closing Character field with #.Error location: .hdr0536The .hdr Segment Record Count field must match the Record Count of the Segment Record.Populate the .hdr Segment Record Count field with a value that is equal to the Record Count of the Segment Record. · .hdrAction: Populate the .hdr Segment Record Count field with a value that is equal to the Record Count of the Segment Record.Error location: .hdr0537The .hdr Mail Piece Unit Record Count field must match the Record Count of the Mail Piece Unit Record.Populate the .hdr Mail Piece Unit Record Count field with a value that is equal to the Record Count of the Mail Piece Unit Record. · .hdrAction: Populate the .hdr Mail Piece Unit Record Count field with a value that is equal to the Record Count of the Mail Piece Unit Record.Error location: .hdr0538The .hdr Component Record Count field must match the Record Count of the Component Record.Populate the .hdr Component Record Count field with a value that is equal to the Record Count of the Component Record. · .hdrAction: Populate the .hdr Component Record Count field with a value that is equal to the Record Count of the Component Record.Error location: .hdr0539The .hdr Container Quantity Record Count field must match the Record Count of the Container Quantity Record.Populate the .hdr Container Quantity Record Count field with a value that is equal to the Record Count of the Container Quantity Record. · .hdrAction: Populate the .hdr Container Quantity Record Count field with a value that is equal to the Record Count of the Container Quantity Record.Error location: .hdr0540The .hdr Package Quantity Record Count field must match the Record Count of the Package Quantity Record.Populate the .hdr Package Quantity Record Count field with a value that is equal to the Record Count of the Package Quantity Record. · .hdrAction: Populate the .hdr Package Quantity Record Count field with a value that is equal to the Record Count of the Package Quantity Record.Error location: .hdr0541For .hdr File Processing, the .hdr Walk Sequence Record Count field must match the Record Count of the Walk Sequence Record.Populate the .hdr Walk Sequence Record Count field with a value that is equal to the Record Count of the Walk Sequence Record. · .hdrAction: Populate the .hdr Walk Sequence Record Count field with a value that is equal to the Record Count of the Walk Sequence Record.Error location: .hdr0542The .hdr Piece Detail Record Count field must match the Record Count of the Piece Detail Record.Populate the .hdr Piece Detail Record Count field with a value that is equal to the Record Count of the Piece Detail Record. · .hdrAction: Populate the .hdr Piece Detail Record Count field with a value that is equal to the Record Count of the Piece Detail Record.Error location: .hdr0546For .hdr File Processing, the .hdr Postage Adjustment Record Count field must match the Record Count of the Postage Adjustment Record.Populate the .hdr Postage Adjustment Record Count field with a value that is equal to the Record Count of the Postage Adjustment Record. · .hdrAction: Populate the .hdr Postage Adjustment Record Count field with a value that is equal to the Record Count of the Postage Adjustment Record.Error location: .hdr0549For .hdr File Processing, the .hdr Original Container Identification Record Count field must match the Record Count of the Original Container Identification Record.Populate the .hdr Original Container Identification Record Count field with a value that is equal to the Record Count of the Original Container Identification Record. · .hdrAction: Populate the .hdr Original Container Identification Record Count field with a value that is equal to the Record Count of the Original Container Identification Record.Error location: .hdr0552For .hdr File Processing, there can be no characters after the .hdr Closing Character.Remove all characters after the .hdr Closing Character field. · .hdrAction: Remove all characters after the .hdr Closing Character field.Error location: .hdr0553The value provide for the .cqt Service Level Indicator field was {1}; it must contain F = Full Service when the .seg Full-Service Participation Indicator is populated with F = Full Service.Populate the .cqt Service Level Indicator field with F when the .seg Full-Service Participation Indicator field is populated with F. · .cqtAction: Populate the .cqt Service Level Indicator field with F when the .seg Full-Service Participation Indicator field is populated with F.Error location: .cqt0555At least one record in the .cqt file must contain a Service Level Indicator of F when the .seg Full Service Participation Indicator is populated with M = Mixed (Basic and Full Mixed) The value provided was {1}.Populate the .cqt Service Level Indicator field with F or at least one record when the .seg Full-Service Participation Indicator field is populated with M. · .cqtAction: Populate the .cqt Service Level Indicator field with F or at least one record when the .seg Full-Service Participation Indicator field is populated with M.Error location: .cqt0556For Full-Service Processing, the .seg Class Defining Preparation field value provided was{1}; it must contain 1 = First class, 2 = Periodicals, 3 = Std mail, 4 = Pkg Services, or 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populated the .seg Class Defining Preparation field with 1 = First Class, 2 = Periodicals, 3 = Std Mail, 4 = Pkg Services, or 6 = Std/Bound Printed Matter/Periodicals Co-Mailings. · .segAction: Populated the .seg Class Defining Preparation field with 1 = First Class, 2 = Periodicals, 3 = Std Mail, 4 = Pkg Services, or 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Error location: .seg0557For Full-Service Processing, the Mail.dat Job is missing a required file; it must contain either a .pdr or .pbc file.Include either a .pdr, or .pbc file in the mailing. · .pdr, .pbcAction: Include either a .pdr, or .pbc file in the mailing.Error location: .pdr, .pbc0561For Full-Service Processing, the .pdr IM Barcode field must be populated with 31 characters when the associated .cqt record Service Level Indicator field is populated with F=Full service option.Populate the .pdr IM Barcode field with 31 characters when the associated .cqt record Service Level Indicator field is populated with F. · .pdrAction: Populate the .pdr IM Barcode field with 31 characters when the associated .cqt record Service Level Indicator field is populated with F.Error location: .pdr0562For Full-Service Processing, the .seg Principal Processing Category field value provided was {1}; it must contain LT = Letter, FL = Flat, or CD = Card when the .seg Class Defining Preparation field is populated with 1 =First class.Populate the .seg Principal Processing Category field with LT = Letters, FL = Flats, or CD = Cards when the .seg Class Defining Preparation field is populated with 1 = First Class. · .segAction: Populate the .seg Principal Processing Category field with LT = Letters, FL = Flats, or CD = Cards when the .seg Class Defining Preparation field is populated with 1 = First Class.Error location: .seg0563For Full-Service Processing, the .seg Principal Processing Category field value provided was {1}; it must contain LT = Letter or FL = Flat when the .seg Class Defining Preparation field is populated with 2=Periodicals.Populate the .seg Principal Processing Category field with LT = Letters or FL = Flats when the .seg Class Defining Preparation field is populated with 2 = Periodicals. · .segAction: Populate the .seg Principal Processing Category field with LT = Letters or FL = Flats when the .seg Class Defining Preparation field is populated with 2 = Periodicals.Error location: .seg0564For Full-Service Processing, the .seg Principal Processing Category field value provided was {1}; it must contain LT = Letters or FL = Flats when the .seg Class Defining Preparation field is populated with 3 = Std mail.Populate the .seg Principal Processing Category field with LT = Letters or FL = Flats when the .seg Class Defining Preparation field is populated with 3 = Std Mail. · .segAction: Populate the .seg Principal Processing Category field with LT = Letters or FL = Flats when the .seg Class Defining Preparation field is populated with 3 = Std Mail.Error location: .seg0565For Full-Service Processing, the .seg Principal Processing Category field value provided was {1}; it must contain FL= Flat when the .seg Class Defining Preparation field is populated with 4=Pkg Services and .mpu Mail Piece Unit – Rate Type field is populated with B = Bound Printed Matter.Populate the .seg Principal Processing Category field with FL = Flats when the .seg Class Defining Preparation field is populated with 4 = Pkg Services and the .mpu Mail Piece Unit – Rate Type field is populated with B = Bound Printed Matter. · Multiple FilesAction: Populate the .seg Principal Processing Category field with FL = Flats when the .seg Class Defining Preparation field is populated with 4 = Pkg Services and the .mpu Mail Piece Unit – Rate Type field is populated with B = Bound Printed Matter.Error location: Multiple Files0567For Full-Service Processing, the .csm Number of Pieces field is required when the .seg Logical/Physical Container Indicator field is populated with P = Physical Container. The value provided was {1}.Populate the .csm Number of Piece field when the .seg Logical/Physical Container Indicator field is populated with P. · .csmAction: Populate the .csm Number of Piece field when the .seg Logical/Physical Container Indicator field is populated with P.Error location: .csm0569The value provided For Full-Service Processing, the .csm Container Type field was {1}; it must contain 1 = #1 Sack, 2 = #2 Sack, 3 = #3 Sack, 4 = 01V Sack, 5 = 03V Sack, S = Sack (general), V = Sack (Virtual), F = Flat Tub, O = 1’ Tray, T = 2’ Tray, E = EMM Tray, or CT = Carton for a Physical Handling Unit or B = Bedload, U = Unit Load Device, W = Walled Unit, Z = User Pallet, H = EIRS 61 – Hamper, Large Canvas, A = EIRS 61P – Hamper, Large Plastic, G = EIRS 66 – General Purpose Mail Container w/Gate, D = EIRS 68 – Eastern Region Mail Container w/Web Door, R = EIRS 84 – Wire Container Rigid, C = EIRS 84C – Collapsible Wire Container, P = Pallet, or AB = Air Box for a Physical Container when the .seg Logical/Physical Container Indicator field is populated with P = Physical Container.Populate the .csm Container Type field with 1, 2, 3, 4, 5, S, V, F, O, T, E or CT for a Physical Handling Unit or B, U, W, Z, H, A, G, D, R, C, P, CT or AB for a Physical Container when the .seg Logical/Physical Container Indicator field is populated with P. · Multiple FilesAction: Populate the .csm Container Type field with 1, 2, 3, 4, 5, S, V, F, O, T, E or CT for a Physical Handling Unit or B, U, W, Z, H, A, G, D, R, C, P, CT or AB for a Physical Container when the .seg Logical/Physical Container Indicator field is populated with P.Error location: Multiple Files0572The value provided for .csm Container Type field was {1}; at least one .csm Container Type field must contain M = Logical Pallet (MLOCR), L =Logical Tray (MLOCR), or V = Sack (Virtual) when the .seg Logical/Physical Container Indicator field is populated with L = Logical Container.Populate the .csm Container Type field with M, L, or V for at least one record when the .seg Logical/Physical Container Indicator field is populated with L. · .csmAction: Populate the .csm Container Type field with M, L, or V for at least one record when the .seg Logical/Physical Container Indicator field is populated with L.Error location: .csm0575For Full-Service Processing, the .csm Scheduled Ship Date field is required when the .csm USPS Pick Up field is populated with Y = Yes and the .csm Container Status field is populated with R = Ready to Pay or T = Transportation Information Update. The value provided was {1}.Populate the .csm Scheduled Ship Date field when the .csm USPS Pick Up field is Y and the .csm Container Status field is populated with R or T. · .csmAction: Populate the .csm Scheduled Ship Date field when the .csm USPS Pick Up field is Y and the .csm Container Status field is populated with R or T.Error location: .csm0576For Full-Service Processing, the .csm Scheduled Ship Time field is required when the .csm USPS Pick Up field is populated with Y = Yes and the .csm Container Status field is populated with R = Ready to pay or T = Transportation Information Update. The value provided was {}Populate the .csm Scheduled Ship Time field when the .csm USPS Pick Up field is Y and the .csm Container Status field is populated with R or T. · .csmAction: Populate the .csm Scheduled Ship Time field when the .csm USPS Pick Up field is Y and the .csm Container Status field is populated with R or T.Error location: .csm0577For Full-Service Processing, the .csm Scheduled Induction Start Date field is required when the .csm Reservation Number and the .csm FAST Content ID fields are populated. The value provided was {1}.Populate the .csm Scheduled Induction Start Date field when the .csm Reservation Number and .csm FAST Content ID fields are populated. · .csmAction: Populate the .csm Scheduled Induction Start Date field when the .csm Reservation Number and .csm FAST Content ID fields are populated.Error location: .csm0578For Full-Service Processing, the .csm Scheduled Induction Start Time is required when the .csm Reservation Number and .csm FAST Content ID fields are populated.Populate the .csm Scheduled Induction Start Time field when the .csm Reservation Number and .csm FAST Content ID fields are populated. · .csmAction: Populate the .csm Scheduled Induction Start Time field when the .csm Reservation Number and .csm FAST Content ID fields are populated.Error location: .csm0581The value provided for Full-Service Processing, the .csm Sibling Container Indicator field was {1}; it must contain Y = Yes when the .csm Container Type field is populated with M = Logical Pallet (MLOCR).Populate the .csm Sibling Container Indicator field with Y when the .csm Container Type field is populated with M. · .csmAction: Populate the .csm Sibling Container Indicator field with Y when the .csm Container Type field is populated with M.Error location: .csm0582The value provided for Full-Service Processing is invalid. The .csm Label: IM Container Or IM Tray Barcode field provided was {1}; it must contain a 21 character Imcb, when the mailing is not setup as a Simple Mailing.Populate the .csm Label: IM Container or IM Tray Barcode field with a 21 character Imcb, when the mailing is not setup as a Simple Mailing. · .csmAction: Populate the .csm Label: IM Container or IM Tray Barcode field with a 21 character Imcb, when the mailing is not setup as a Simple Mailing.Error location: .csm0583The value provided for Full-Service Processing is invalid. The .csm Label: IM Container Or IM Tray Barcode field provided was {1}; it must contain a 24 character Imtb, when the mailing is not setup as a Simple Mailing.Populate the .csm Label: IM Container or IM Tray Barcode field with a 24 character Imtb, when the mailing is not setup as a Simple Mailing. · .csmAction: Populate the .csm Label: IM Container or IM Tray Barcode field with a 24 character Imtb, when the mailing is not setup as a Simple Mailing.Error location: .csm0584For Full-Service Processing, the .pdr LOT Sequence Number is required when the .pdr LOT Direction Code is populated.Populate the .pdr Line-Of-Travel Sequence Number field when the .pdr Line-Of-Travel Direction Code field is populated. · .pdrAction: Populate the .pdr Line-Of-Travel Sequence Number field when the .pdr Line-Of-Travel Direction Code field is populated.Error location: .pdr0585For Full-Service Processing, the .pdr LOT Direction Code is required when the .pdr LOT Sequence Number is populated.Populate the .pdr Line-Of-Travel Seq. Direction Code field when the .pdr Line-Of-Travel Sequence Number field is populated. · .pdrAction: Populate the .pdr Line-Of-Travel Seq. Direction Code field when the .pdr Line-Of-Travel Sequence Number field is populated.Error location: .pdr0586For Full-Service Processing, the .csm USPS Pick Up field is required when the .seg Full-Service Participation field is populated with F = Full Service Option or M = Mixed (Basic and Full Mixed), the .csm Container Status field is populated with R = Ready to pay or T = Transportation Information Update, and the container is not a sibling.Populate the .csm USPS Pick Up field when the .seg Full-Service Participation field is populated with F or M, the .csm Container Status field is populated with R or T, and the container is not a sibling. · .csmAction: Populate the .csm USPS Pick Up field when the .seg Full-Service Participation field is populated with F or M, the .csm Container Status field is populated with R or T, and the container is not a sibling.Error location: .csm0592For File Updates Processing, .hdr and .seg files are required files and must be submitted with every Mail.dat Update.Include the .hdr and .seg files for every update submission. · Multiple filesAction: Include the .hdr and .seg files for every update submission.Error location: Multiple files0595For File Updates Processing, .seg Mail Facility ID must match the original .seg Mail Facility ID for a Delete Job..segError location: .seg0597The .mpa USPS Publication Number field is a required field when the .seg Class Defining Preparation field is populated with 2 = Periodicals, .cqt Container Charge Method field is populated with 2= Charge all to one of the publications, and the .mpu Mail Piece Unit – Class field is populated with 5 = Per Pending.Populate the .mpa USPS Publication Number field with the .seg Class Defining Preparation field is populated with 2, .cqt Container Charge Method field is populated with 2, and the .mpu Mail Piece Unit – Class field is populated with 5. · .mpaAction: Populate the .mpa USPS Publication Number field with the .seg Class Defining Preparation field is populated with 2, .cqt Container Charge Method field is populated with 2, and the .mpu Mail Piece Unit – Class field is populated with 5.Error location: .mpa0604For File Updates Processing, the .csm Container Status field value provided was {1} based on the previous Container Status of C= Cancel; it must contain = Delete (A Deleted Container Cannot be reused like the C Flag, where a C can be changed to “O” and then to “R” or “X” or “T” ). Deleted Containers, IM Barcode(s), Container, Tray, and Piece cannot be re-used for 45 days, per USPS, after a Deleted status is sent to USPS. P = Preliminary postage statement, R = Ready to pay or X = Paid.Populate the .csm Container Status field with D, P, R, or X when the .csm Container Status field was populated with C in the original job submission. · .csmAction: Populate the .csm Container Status field with D, P, R, or X when the .csm Container Status field was populated with C in the original job submission.Error location: .csm0605For File Updates Processing, the .csm Container Status field cannot be updated to a different value if the previous .csm Container Status field was populated with D= Delete (A Deleted Container Cannot be reused like the C Flag, where a C can be changed to ‘O’ and then to ‘R’ or ‘X’ or ‘T’). Deleted Containers’ IM Barcode(s), Container, Tray, and Piece cannot be re-used for 45 days, per USPS, after a Deleted status is sent to USPS.Do not attempt to update the .csm Container Status field if the .csm Container Status field was populated with D in a previous submission. · .csmAction: Do not attempt to update the .csm Container Status field if the .csm Container Status field was populated with D in a previous submission.Error location: .csm0606For File Updates Processing, the .csm Container Status field value provided was {1}; based on the previous .csm Container Status of O; it must contain D= Delete (A Deleted Container Cannot be reused like the C Flag, where a C can be changed to ‘O’ and then to ‘R’ or ‘X’ or ‘T’). Deleted Containers, IM Barcode(s), Container, Tray, and Piece cannot be re-used for 45 days, per USPS, after a Deleted status is sent to USPS, P= Preliminary postage statement, R= Ready to pay, X= Paid, or C= Cancel.Populate the .csm Container Status field with D, P, R, X, or C when the .csm Container Status field was populated with O in the original job submission. · .csmAction: Populate the .csm Container Status field with D, P, R, X, or C when the .csm Container Status field was populated with O in the original job submission.Error location: .csm0607For File Updates Processing, the .csm Container Status field contains an invalid value based on the previous .csm Container Status of P= Preliminary postage statement; it must contain D= Delete (A Deleted Container Cannot be reused like the C Flag, where a C can be changed to ‘O’ and then to ‘R’ or ‘X’ or ‘T’). Deleted Containers’ IM Barcode(s), Container, Tray, and Piece cannot be re-used for 45 days, per USPS, after a Deleted status is sent to USPS., P= Preliminary postage statement, R= Ready to pay, or C= Cancel. The value provided was {1}.Populate the .csm Container Status field with D, P, R, or C when the .csm Container Status field was populated with P in the original job submission. · .csmAction: Populate the .csm Container Status field with D, P, R, or C when the .csm Container Status field was populated with P in the original job submission.Error location: .csm0608For File Updates Processing, the .csm Container Status field value provided was {1}; based on the previous .csm Container Status of R= Ready to pay; it must contain D= Delete (A Deleted Container Cannot be reused like the C Flag, where a C can be changed to ‘O’ and then to ‘R’ or ‘X’ or ‘T’). Deleted Containers, IM Barcode(s), Container, Tray, and Piece cannot be re-used for 45 days, per USPS, after a Deleted status is sent to USPS., X= Paid, T= Transportation Information Update, if after “R”= Ready To Pay or ‘X’= Previously Closed or Paid, or C= Cancel.Populate the .csm Container Status field with R, X, T, or C when the .csm Container Status field was populated with R in the original job submission. · .csmAction: Populate the .csm Container Status field with R, X, T, or C when the .csm Container Status field was populated with R in the original job submission.Error location: .csm0609For File Updates Processing, the .csm Container Status field contains an invalid value based on the previous .csm Container Status of T= Transportation Information Update, if after “R”(Ready ToPay) or ‘X’ (Previously Closed or Paid); it must contain D = Delete (A Deleted Container Cannot be reused like the C Flag, where a C can be changed to ‘O’ and then to ‘R’ or ‘X’ or ‘T’). Deleted Containers IM Barcode(s), Container, Tray, and Piece cannot be re-used for 45 days, per USPS, after a Deleted status is sent to USPS., X = Paid, T= Transportation Information Update, if after R = Ready To Pay or X = Previously Closed or Paid, or C = Cancel. The value provided was {1}.Populate the .csm Container Status field with D, X, T, or C when the .csm Container Status field was populated with T in the original job submission. · .csmAction: Populate the .csm Container Status field with D, X, T, or C when the .csm Container Status field was populated with T in the original job submission.Error location: .csm0610For File Updates Processing, the .csm Container Status field contains an invalid value based on the previous .csm Container Status of X= Paid; it must contain T= Transportation Information Update, if after R = Ready To Pay or X = Previously Closed or Paid.Populate the .csm Container Status field with X when the .csm Container Status field was populated with T in the original job submission. · .csmAction: Populate the .csm Container Status field with X when the .csm Container Status field was populated with T in the original job submission.Error location: .csm0647Required Field Missing: Job ID is a required field in the .csm file.Populate the .csm Job ID field. · .csmAction: Populate the .csm Job ID field.Error location: .csm0648Required Field Missing: Segment ID is a required field in the .csm file.Populate the .csm Segment ID field. · .csmAction: Populate the .csm Segment ID field.Error location: .csm0649Required Field Missing: Container Type is a required field in the .csm file.Populate the .csm Container Type field. · .csmAction: Populate the .csm Container Type field.Error location: .csm0650Required Field Missing: Container ID is a required field in the .csm file.Populate the .csm Container ID field. · .csmAction: Populate the .csm Container ID field.Error location: .csm0651Required Field Missing: Display Container ID is a required field in the .csm file.Populate the .csm Display Container ID field. · .csmAction: Populate the .csm Display Container ID field.Error location: .csm0652Required Field Missing: Container Destination ZIP is a required field in the .csm file.Populate the .csm Container Destination Zip field. · .csmAction: Populate the .csm Container Destination Zip field.Error location: .csm0653Required Field Missing: Container Level is a required field in the .csm file.Populate the .csm Container Level field. · .csmAction: Populate the .csm Container Level field.Error location: .csm0656Required Field Missing: Entry Point for Entry Discount – Postal Code is a required field in the .csm file.Populate the .csm Entry Point for Entry Discount – Postal Code field. · .csmAction: Populate the .csm Entry Point for Entry Discount – Postal Code field.Error location: .csm0657Required Field Missing: Entry Point for Entry Discount – Facility Type is a required field in the .csm file.Populate the .csm Entry Point for Entry Discount – Facility Type field. · .csmAction: Populate the .csm Entry Point for Entry Discount – Facility Type field.Error location: .csm0658Required Field Missing: Number of Copies is a required field in the .csm file, unless the .seg Class Defining Preparation field is populated with 1 = First Class or 3 = Std Mail, .csm Container Type is populated with L = Logical Tray (MLOCR) or F = Flat Tub, .csm Container ID does not have a corresponding .cqt Container ID, and the Container ID is referenced in the .csm Supplemental Physical Container ID on a Container, which has a Container ID in the .cqt file.Populate the .csm Number of Copies field, unless the .seg Class Defining Preparation field is populated with 1 = First Class or 3 = Std Mail, .csm Container Type is populated with L = Logical Tray (MLOCR) or F = Flat Tub, .csm Container ID does not have a corresponding .cqt Container ID, and the Container ID is referenced in the .csm Supplemental Physical Container ID on a Container, which has a Container ID in the .cqt file. · .csmAction: Populate the .csm Number of Copies field, unless the .seg Class Defining Preparation field is populated with 1 = First Class or 3 = Std Mail, .csm Container Type is populated with L = Logical Tray (MLOCR) or F = Flat Tub, .csm Container ID does not have a corresponding .cqt Container ID, and the Container ID is referenced in the .csm Supplemental Physical Container ID on a Container, which has a Container ID in the .cqt file.Error location: .csm0660Required Field Missing: Tray Preparation Type is a required field in the .csm file.Populate the .csm Tray Preparation Type field. · .csmAction: Populate the .csm Tray Preparation Type field.Error location: .csm0661Required Field Missing: Protected Container Status is a required field in the .csm file..csmError location: .csm0662Required Field Missing: Number of Pieces is a required field in the .csm file, unless the .seg Class Defining Preparation field is populated with 1 = First Class or 3 = Std Mail, .csm Container Type is populated with L = Logical Tray (MLOCR) or F = Flat Tub, .csm Container ID does not have a corresponding .cqt Container ID, and the Container ID is referenced in the .csm Supplemental Physical Container ID on a Container, which has a Container ID in the .cqt file.Populate the .csm Number of Pieces field, unless the .seg Class Defining Preparation field is populated with 1 = First Class or 3 = Std Mail, .csm Container Type is populated with L = Logical Tray (MLOCR) or F = Flat Tub, .csm Container ID does not have a corresponding .cqt Container ID, and the Container ID is referenced in the .csm Supplemental Physical Container ID on a Container, which has a Container ID in the .cqt file. · .csmAction: Populate the .csm Number of Pieces field, unless the .seg Class Defining Preparation field is populated with 1 = First Class or 3 = Std Mail, .csm Container Type is populated with L = Logical Tray (MLOCR) or F = Flat Tub, .csm Container ID does not have a corresponding .cqt Container ID, and the Container ID is referenced in the .csm Supplemental Physical Container ID on a Container, which has a Container ID in the .cqt file.Error location: .csm0664Required Field Missing: CSM Record Status is a required field in the .csm file.Populate the .csm CSM Record Status field. · .csmAction: Populate the .csm CSM Record Status field.Error location: .csm0665Required Field Missing: Closing Character is a required field in the .csm file.Populate the .csm Closing Character field. · .csmAction: Populate the .csm Closing Character field.Error location: .csm0666Alphanumeric Data Type Error: Job ID must be an alphanumeric value in the .csm file.Populate the .csm Job ID field with an alphanumeric value. · .csmAction: Populate the .csm Job ID field with an alphanumeric value.Error location: .csm0667Alphanumeric Data Type Error: Segment ID must be an alphanumeric value in the .csm file.Populate the .csm Segment ID field with an alphanumeric value. · .csmAction: Populate the .csm Segment ID field with an alphanumeric value.Error location: .csm0668Alphanumeric Data Type Error: Display Container ID must be an alphanumeric value in the .csm file.Populate the .csm Display Container ID field with an alphanumeric value. · .csmAction: Populate the .csm Display Container ID field with an alphanumeric value.Error location: .csm0669The .csm Container Grouping Description field must be populated with an alphanumeric value (when populated).Populate the .csm Container Grouping Description field with an alphanumeric value (when populated). · .csmAction: Populate the .csm Container Grouping Description field with an alphanumeric value (when populated).Error location: .csm0672Alphanumeric Data Type Error: Entry Point for Entry Discount – Postal Code must be an alphanumeric value in the .csm file.Populate the .csm Entry Point for Entry Discount – Postal Code field with an alphanumeric value. · .csmAction: Populate the .csm Entry Point for Entry Discount – Postal Code field with an alphanumeric value.Error location: .csm0673The .csm Entry Point - Actual/Delivery Locale Key field must be populated with an alphanumeric value, and must either contain "ORIGIN" when the .csm Entry Point for Entry Discount - Facility Type field is populated with O = Origin or H = Tran Hub, or must contain "LOC" plus 6 alphanumeric characters when the .csm Entry Point for Entry Discount - Facility Type field is populated with R = DADC, S = DSCF, D = DDU, C = Origin SCF, J = Origin ADC, E = Origin DU, T = Orig(T-Hub Sq), or Q = Origin AMF. The value provided was {1}.Populate the .csm Entry Point - Actual/Delivery Locale Key with an alphanumeric value and either "ORIGIN" when the Entry Point for Entry Discount Facility is set to O or H, or "LOC" plus 6 alphanumeric characters when the Entry Point for Entry Discount Facility is set to R, S, D, C, J, E, T, or Q. · .csmAction: Populate the .csm Entry Point - Actual/Delivery Locale Key with an alphanumeric value and either "ORIGIN" when the Entry Point for Entry Discount Facility is set to O or H, or "LOC" plus 6 alphanumeric characters when the Entry Point for Entry Discount Facility is set to R, S, D, C, J, E, T, or Q.Error location: .csm0674Alphanumeric Data Type Error: Truck or Dispatch Number must be an alphanumeric value in the .csm file (when populated).Populate the .csm Truck or Dispatch Number field with an alphanumeric value (when populated). · .csmAction: Populate the .csm Truck or Dispatch Number field with an alphanumeric value (when populated).Error location: .csm0675Alphanumeric Data Type Error: Stop Designator Field must be an alphanumeric value in the .csm file (when populated).Populate the .csm Stop Designator field with an alphanumeric value (when populated). · .csmAction: Populate the .csm Stop Designator field with an alphanumeric value (when populated).Error location: .csm0676Alphanumeric Data Type Error: Reservation Number must be an alphanumeric value in the .csm file (when populated).Populate the .csm Reservation Number field with an alphanumeric value when populated. · .csmAction: Populate the .csm Reservation Number field with an alphanumeric value when populated.Error location: .csm0679Alphanumeric Data Type Error: Actual Induction Time must be an alphanumeric value formatted as HH:MM in the .csm file (when populated).Populate the .csm Actual Induction Time field with an alphanumeric value formatted as HH:MM when populated. · .csmAction: Populate the .csm Actual Induction Time field with an alphanumeric value formatted as HH:MM when populated.Error location: .csm0680Alphanumeric Data Type Error: Postage Statement Mailing Time must be an alphanumeric value formatted as HH:MM in the .csm file (when populated).Populate the .csm Postage Statement Mailing Time field with an alphanumeric value formatted as HH:MM when populated. · .csmAction: Populate the .csm Postage Statement Mailing Time field with an alphanumeric value formatted as HH:MM when populated.Error location: .csm0681The .csm Unique Container ID field must be populated with an alphanumeric value (when populated).Populate the .csm Unique Container ID field with an alphanumeric value when populated. · .csmAction: Populate the .csm Unique Container ID field with an alphanumeric value when populated.Error location: .csm0682Alphanumeric Data Type Error: Production Machine ID must be an alphanumeric value in the .csm file (when populated)..csmError location: .csm0683Alphanumeric Data Type Error: Trans-Ship Bill of Lading Number must be an alphanumeric value in the .csm file (when populated).Populate the .csm Trans-Ship Bill of Lading Number field with an alphanumeric value when populated. · .csmAction: Populate the .csm Trans-Ship Bill of Lading Number field with an alphanumeric value when populated.Error location: .csm0684Alphanumeric Data Type Error: Postage Grouping ID must be an alphanumeric value in the .csm file (when populated).Populate the .csm Postage Grouping ID field with an alphanumeric value when populated. · .csmAction: Populate the .csm Postage Grouping ID field with an alphanumeric value when populated.Error location: .csm0685Alphanumeric Data Type Error: EMD – 8125 ANS Barcode must be an alphanumeric value in the .csm file (when populated).Populate the .csm TEMD – 8125 ANS Barcode field with an alphanumeric value when populated. · .csmAction: Populate the .csm TEMD – 8125 ANS Barcode field with an alphanumeric value when populated.Error location: .csm0688Alphanumeric Data Type Error: FAST Content ID must be an alphanumeric value in the .csm file (when populated).Populate the .csm FAST Content ID field with an alphanumeric value when populated. · .csmAction: Populate the .csm FAST Content ID field with an alphanumeric value when populated.Error location: .csm0689Alphanumeric Data Type Error: Scheduled Ship Time must be an alphanumeric value in the .csm file (when populated).Populate the .csm Scheduled Ship Time field with an alphanumeric value formatted as HH:MM when populated. · .csmAction: Populate the .csm Scheduled Ship Time field with an alphanumeric value formatted as HH:MM when populated.Error location: .csm0690The .csm DMM Section Defining Container Preparation field must be populated with an alphanumeric value (when populated).Populate the .csm TDMM Section Defining Container Preparation field with an alphanumeric value when populated. · .csmAction: Populate the .csm TDMM Section Defining Container Preparation field with an alphanumeric value when populated.Error location: .csm0692Alphanumeric Data Type Error: Label: IM Container or IM Tray Barcode must be an alphanumeric value in the .csm file (when populated).Populate the .csm Label: IM Container or IM Tray Barcode field with an alphanumeric value when populated. · .csmAction: Populate the .csm Label: IM Container or IM Tray Barcode field with an alphanumeric value when populated.Error location: .csm0693Alphanumeric Data Type Error: Label: 10-Character Container Barcode must be an alphanumeric value in the .csm file (when populated).Populate the .csm Label: 10-Character Container Barcode field with an alphanumeric value when populated. · .csmAction: Populate the .csm Label: 10-Character Container Barcode field with an alphanumeric value when populated.Error location: .csm0700Alphanumeric Data Type Error: Label: Entry (Origin) Point Line must be an alphanumeric value in the .csm file (when populated).Populate the .csm Label: Entry (Origin) Point Line field with an alphanumeric value when populated. · .csmAction: Populate the .csm Label: Entry (Origin) Point Line field with an alphanumeric value when populated.Error location: .csm0701Alphanumeric Data Type Error: Label: Container Label CIN Code must be an alphanumeric value in the .csm file (when populated).Populate the .csm Label: Container Label CIN Code field with an alphanumeric value when populated. · .csmAction: Populate the .csm Label: Container Label CIN Code field with an alphanumeric value when populated.Error location: .csm0702Alphanumeric Data Type Error: User Option must be an alphanumeric value in the .csm file (when populated).Populate the .csm User Option Field with an alphanumeric value when populated. · .csmAction: Populate the .csm User Option Field with an alphanumeric value when populated.Error location: .csm0704The .csm Container ID field must be populated with a numeric value.Populate the .csm Container ID field with a numeric value. · .csmAction: Populate the .csm Container ID field with a numeric value.Error location: .csm0707Numeric Data Type Error: Additional In-Home Range must be a numeric value in the .csm file (when populated).Populate the .csm Additional In-Home Range field with a numeric value when populated. · .csmAction: Populate the .csm Additional In-Home Range field with a numeric value when populated.Error location: .csm0708The .csm Actual Induction Date field must be populated with a valid numeric value formatted as YYYYMMDD (when populated).Populate the .csm Actual Induction Date field with a valid numeric value formatted as YYYYMMDD when populated. · .csmAction: Populate the .csm Actual Induction Date field with a valid numeric value formatted as YYYYMMDD when populated.Error location: .csm0709The .csm Postage Statement Mailing Date must be populated with a valid numeric value formatted as YYYYMMDD (when populated).Populate the .csm Postage Statement Mailing Date field with a valid numeric value formatted as YYYYMMDD when populated. · .csmAction: Populate the .csm Postage Statement Mailing Date field with a valid numeric value formatted as YYYYMMDD when populated.Error location: .csm0710Numeric Data Type Error: Number of Copies must be a numeric value in the .csm file.Populate the .csm Number of Copies field with a numeric value. · .csmAction: Populate the .csm Number of Copies field with a numeric value.Error location: .csm0711Numeric Data Type Error: Number of Pieces must be a numeric value in the .csm file.Populate the .csm Number of Pieces field with a numeric value. · .csmAction: Populate the .csm Number of Pieces field with a numeric value.Error location: .csm0712Numeric Data Type Error: Total Weight must be a numeric value in the .csm file.Populate the .csm Total Weight field with a numeric value. · .csmAction: Populate the .csm Total Weight field with a numeric value.Error location: .csm0714Numeric Data Type Error: Container Gross Weight must be a numeric value in the .csm file (when populated).Populate the .csm Container Gross Weight field with a numeric value when populated. · .csmAction: Populate the .csm Container Gross Weight field with a numeric value when populated.Error location: .csm0715Numeric Data Type Error: Container Height must be a numeric value in the .csm file (when populated).Populate the .csm Container Height field with a numeric value when populated. · .csmAction: Populate the .csm Container Height field with a numeric value when populated.Error location: .csm0717The .csm FAST Scheduler ID field must be populated with a numeric value (when populated).Populate the .csm FAST Scheduler ID Weight field with a numeric value when populated. · .csmAction: Populate the .csm FAST Scheduler ID Weight field with a numeric value when populated.Error location: .csm0718Numeric Data Type Error: Scheduled Ship Date must be a valid numeric value formatted as YYYYMMDD (cannot be all zeros) in the .csm file (when populated).Populate the .csm Scheduled Ship Date field with a valid numeric value formatted as YYYYMMDD (cannot be all zeros) when populated. · .csmAction: Populate the .csm Scheduled Ship Date field with a valid numeric value formatted as YYYYMMDD (cannot be all zeros) when populated.Error location: .csm0723Date Data Type Error: Actual Container Ship Date must be a valid numeric value formatted as YYYYMMDD in the .csm filePopulate the .csm Actual Container Ship Date field with a valid numeric value formatted as YYYYMMDD. · .csmAction: Populate the .csm Actual Container Ship Date field with a valid numeric value formatted as YYYYMMDD.Error location: .csm0726Date Data Type Error: Scheduled Pick Up Date must be a valid numeric value formatted as YYYYMMDD in the .csm file.Populate the .csm Scheduled Pick Up Date field with a valid numeric value formatted as YYYYMMDD. · .csmAction: Populate the .csm Scheduled Pick Up Date field with a valid numeric value formatted as YYYYMMDD.Error location: .csm0728Date Data Type Error: Scheduled In-Home Date must be a valid numeric value formatted as YYYYMMDD in the .csm file.Populate the .csm Scheduled In-Home Date field with a valid numeric value formatted as YYYYMMDD. · .csmAction: Populate the .csm Scheduled In-Home Date field with a valid numeric value formatted as YYYYMMDD.Error location: .csm0732The .csm Actual Container Ship Time field must be populated with an alphanumeric value formatted as HH:MM.Populate the .csm Actual Container Ship Time field with an alphanumeric value formatted as HH:MM. · .csmAction: Populate the .csm Actual Container Ship Time field with an alphanumeric value formatted as HH:MM.Error location: .csm0733Time Data Type Error: Scheduled Pick Up Time must be a time value formatted in the HH:MM format in the .csm file.Populate the .csm Scheduled Pick Up Time field with an alphanumeric value formatted as HH:MM. · .csmAction: Populate the .csm Scheduled Pick Up Time field with an alphanumeric value formatted as HH:MM.Error location: .csm0734The value provided for The .csm Container Type field was {1}; it must contain P = Pallet, S = Sack (general), O = 1’ Tray, T = 2’ Tray, E = EMM Tray, F = Flat Tub, B = Bedload, W = Walled Unit, Z = User Pallet, U = Unit Load Device, L = Logical Tray (MLOCR), M = Logical Pallet (MLOCR), H = EIRS 61 – Hamper, Large Canvas, A = EIRS 61P = Hamper, Large Plastic, G = EIRS 66 – General Purpose Mail Container w/Gate, D = EIRS 68 – Eastern Region Mail Container w/Web Door, R = EIRS 84 – Wire Container Rigid, C = EIRS 84C – Collapsible Wire Container, V = Sack (Virtual), 1 = #1 Sack, 2 = #2 Sack, 3 = #3 Sack, 4 = 01V Sack, 5 = 03V, CT = Carton, or AB = Air Box.Populate the .csm Container Type field with P, S, O, T, E, F, B, W, Z, U, L, M, H, A, G, D, R, C, V, 1, 2, 3, 4, 5, CT or AB. · .csmAction: Populate the .csm Container Type field with P, S, O, T, E, F, B, W, Z, U, L, M, H, A, G, D, R, C, V, 1, 2, 3, 4, 5, CT or AB.Error location: .csm0739The value provided For The .csm Included in Other Documentation field was {1}; it must contain O = Original Container I = Internal co-palletization indicator from the Origin Job or L = Linked or new container.Populate the .csm Included In Other Documentation field with O, I or L. · .csmAction: Populate the .csm Included In Other Documentation field with O, I or L.Error location: .csm0741The value provided for the .csm Tray Preparation field was {1}; it must contain P = Package, L = Loose, N = Not Applicable or S = Separator.Populate the .csm Tray Preparation Type field with P, L, N, or S. · .csmAction: Populate the .csm Tray Preparation Type field with P, L, N, or S.Error location: .csm0742The Protected Container Status field contains an invalid value; it must contain {2}..csmError location: .csm0743The Container Presort Content field contains an invalid value; it must contain {2}..csmError location: .csm0744The Geographic Scheme Level field contains an invalid value; it must contain {2}..csmError location: .csm0748The value provided For The .csm USPS Pick Up field was {1}; it must contain Y = Yes or N = No.Populate the .csm USPS Pick Up field with Y or N. · .csmAction: Populate the .csm USPS Pick Up field with Y or N.Error location: .csm0753The value provided For The .csm CSM Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .csm CSM Record Status field with O = Original, D = Delete, I = Insert, or U = Update. · .csmAction: Populate the .csm CSM Record Status field with O = Original, D = Delete, I = Insert, or U = Update.Error location: .csm0754The value provided For The .csm Closing Character field was {1}; it must contain #.Populate the .csm Closing Character field with #. · .csmAction: Populate the .csm Closing Character field with #.Error location: .csm0758The following .csm fields must be populated when the .csm Sibling Container Indicator field is populated with Y=Yes: .Job ID, Segment ID, Container ID, Sibling Container Indicator, Sibling Container Reference ID, and for non simple mailing full-service option Label: IM Container or IM Tray Barcode.Populate the .csm Job ID, Segment ID, Container ID, Sibling Container Indicator, Sibling Container Reference ID, Label: IM Container or IM Tray Barcode when the .csm Sibling Container Indicator field is populated with Y. · .csm Multiple fieldsAction: Populate the .csm Job ID, Segment ID, Container ID, Sibling Container Indicator, Sibling Container Reference ID, Label: IM Container or IM Tray Barcode when the .csm Sibling Container Indicator field is populated with Y.Error location: .csm Multiple fields0764For .csm File Processing, there can be no characters after the .csm Closing Character.Remove all characters after the .csm Closing Character field. · .csmAction: Remove all characters after the .csm Closing Character field.Error location: .csm0775Required Field Missing: Job ID is a required field in the .mcr file.Populate the .mcr Job ID field. · .mcrAction: Populate the .mcr Job ID field.Error location: .mcr0776Required Field Missing: Segment ID is a required field in the .mcr file.Populate the .mcr Segment ID field · .mcrAction: Populate the .mcr Segment ID fieldError location: .mcr0777Required Field Missing: Mail Piece Unit ID is a required field in the .mcr file.Populate the .mcr Mail Piece Unit ID field. · .mcrAction: Populate the .mcr Mail Piece Unit ID field.Error location: .mcr0778Required Field Missing: Component ID is a required field in the .mcr file.Populate the .mcr Component ID field. · .mcrAction: Populate the .mcr Component ID field.Error location: .mcr0779Required Field Missing: Primary MPA ID is a required field in the .mcr file.Populate the .mcr Primary MPA ID field. · .mcrAction: Populate the .mcr Primary MPA ID field.Error location: .mcr0780Required Field Missing: MCR Record Status is a required field in the .mcr file.Populate the .mcr Record Status field. · .mcrAction: Populate the .mcr Record Status field.Error location: .mcr0781Required Field Missing: Closing Character is a required field in the .mcr file.Populate the .mcr Closing Character field. · .mcrAction: Populate the .mcr Closing Character field.Error location: .mcr0782Alphanumeric Data Type Error: Job ID must be an alphanumeric value in the .mcr file. The value provided was {1}.Populate the .mcr Job ID field with an alphanumeric value. · .mcrAction: Populate the .mcr Job ID field with an alphanumeric value.Error location: .mcr0783Alphanumeric Data Type Error: Segment ID must be an alphanumeric value in the .mcr file. The value provided was {1}.Populate the .mcr Segment ID field with an alphanumeric value. · .mcrAction: Populate the .mcr Segment ID field with an alphanumeric value.Error location: .mcr0784Alphanumeric Data Type Error: Mail Piece Unit ID must be an alphanumeric value in the .mcr file when populated. The value provided was {1}.Populate the .mcr Mail Piece Unit ID field with an alphanumeric value when populated. · .mcrAction: Populate the .mcr Mail Piece Unit ID field with an alphanumeric value when populated.Error location: .mcr0785Alphanumeric Data Type Error: Component ID must be an alphanumeric value in the .mcr file when populated. The value provided was {1}.Populate the .mcr Component ID field with an alphanumeric value when populated. · .mcrAction: Populate the .mcr Component ID field with an alphanumeric value when populated.Error location: .mcr0786Alphanumeric Data Type Error: Primary MPA ID must be an alphanumeric value in the .mcr file when populated. The value provided was {1}.Populate the .mcr Primary MPA ID field with an alphanumeric value when populated. · .mcrAction: Populate the .mcr Primary MPA ID field with an alphanumeric value when populated.Error location: .mcr0787Alphanumeric Data Type Error: Additional Postage MPA ID must be an alphanumeric value in the .mcr file when populated. The value provided was {1}.Populate the .mcr Additional Postage MPA ID field with an alphanumeric value when populated. · .mcrAction: Populate the .mcr Additional Postage MPA ID field with an alphanumeric value when populated.Error location: .mcr0788Alphanumeric Data Type Error: Host Statement Component ID must be an alphanumeric value in the .mcr file when populated. The value provided was {1}.Populate the .mcr Host Statement Component ID field with an alphanumeric value when populated. · .mcrAction: Populate the .mcr Host Statement Component ID field with an alphanumeric value when populated.Error location: .mcr0789Alphanumeric Data Type Error: Postage Adjustment MPA ID must be an alphanumeric value in the .mcr file when populated. The value provided was {1}.Populate the .mcr Postage Adjustment MPA ID field with an alphanumeric value when populated. · .mcrAction: Populate the .mcr Postage Adjustment MPA ID field with an alphanumeric value when populated.Error location: .mcr0790Alphanumeric Data Type Error: Reserve must be an alphanumeric value in the .mcr file when populated. The value provided was {1}.Alphanumeric Data Type Error: Reserve must be an alphanumeric value in the .mcr file when populated. The value provided was {1}. · .mcrAction: Alphanumeric Data Type Error: Reserve must be an alphanumeric value in the .mcr file when populated. The value provided was {1}.Error location: .mcr0791The .mcr Host Indicator of Ad Computation field value provided was {1}; it must contain Y = Yes or N = No.Populate the .mcr Host Indicator of Ad Computation field with Y or N. · .mcrAction: Populate the .mcr Host Indicator of Ad Computation field with Y or N.Error location: .mcr0792The .mcr MCR Record Status field value provided was {1}; it must contain O = Original, D = Delete or U = Update.Populate the .mcr Record Status field with O, D, or U. · .mcrAction: Populate the .mcr Record Status field with O, D, or U.Error location: .mcr0793The .mcr Closing Character field provided was {1}; it must contain a #.Populate the .mcr Closing Character field with #. · .mcrAction: Populate the .mcr Closing Character field with #.Error location: .mcr0807Required Field Missing: Job ID is a required field in the .mpu file.Populate the .mpu Job ID field. · .mpuAction: Populate the .mpu Job ID field.Error location: .mpu0808Required Field Missing: Segment ID is a required field in the .mpu file.Populate the .mpu Segment ID field. · .mpuAction: Populate the .mpu Segment ID field.Error location: .mpu0809Required Field Missing: Mail Piece Unit ID is a required field in the .mpu file.Populate the .mpu Mail Piece Unit ID field. · .mpuAction: Populate the .mpu Mail Piece Unit ID field.Error location: .mpu0810Required Field Missing: Mail Piece Unit Name is a required field in the .mpu file.Populate the .mpu Mail Piece Unit Name field. · .mpuAction: Populate the .mpu Mail Piece Unit Name field.Error location: .mpu0812Required Field Missing: MPU – Weight: Source is a required field in the .mpu file.Populate the .mpu MPU – Weight: Source field. · .mpuAction: Populate the .mpu MPU – Weight: Source field.Error location: .mpu0813Required Field Missing: MPU – Weight: Status is a required field in the .mpu file.Populate the .mpu MPU – Weight: Status field. · .mpuAction: Populate the .mpu MPU – Weight: Status field.Error location: .mpu0817Required Field Missing: MPU Surcharge is a required field in the .mpu file.Populate the .mpu Surcharge field. · .mpuAction: Populate the .mpu Surcharge field.Error location: .mpu0818Required Field Missing: Co-Palletization Code is a required field in the .mpu file.Populate the .mpu Co-Palletization Code field. · .mpuAction: Populate the .mpu Co-Palletization Code field.Error location: .mpu0819Required Field Missing: MPU Record Status is a required field in the .mpu file.Populate the .mpu MPU Record Status field. · .mpuAction: Populate the .mpu MPU Record Status field.Error location: .mpu0820Required Field Missing: Closing Character is a required field in the .mpu file.Populate the .mpu Closing Character field. · .mpuAction: Populate the .mpu Closing Character field.Error location: .mpu0821The .mpu Job ID field must be populated with an alphanumeric value.Populate the .mpu Job ID field with an alphanumeric value. · .mpuAction: Populate the .mpu Job ID field with an alphanumeric value.Error location: .mpu0822The .mpu Segment ID field must be populated with an alphanumeric value.Populate the .mpu Segment ID field with an alphanumeric value. · .mpuAction: Populate the .mpu Segment ID field with an alphanumeric value.Error location: .mpu0823The .mpu Mail Piece Unit ID field must be populated with an alphanumeric value.Populate the .mpu Mail Piece Unit ID field with an alphanumeric value. · .mpuAction: Populate the .mpu Mail Piece Unit ID field with an alphanumeric value.Error location: .mpu0824The .mpu Mail Piece Unit Name field must be populated with an alphanumeric value.Populate the .mpu Mail Piece Unit Name field with an alphanumeric value. · .mpuAction: Populate the .mpu Mail Piece Unit Name field with an alphanumeric value.Error location: .mpu0825The .mpu Mail Piece Unit Description field must be populated with an alphanumeric value.Populate the .mpu Mail Piece Unit Description field with an alphanumeric value. · .mpuAction: Populate the .mpu Mail Piece Unit Description field with an alphanumeric value.Error location: .mpu0826The .mpu Co-Palletization Code field must be populated with an alphanumeric value.Populate the .mpu Co-Palletization Code field with an alphanumeric value. · .mpuAction: Populate the .mpu Co-Palletization Code field with an alphanumeric value.Error location: .mpu0828Alphanumeric Data Type Error: Prose XML Edition Code must be an alphanumeric value in the .mpu file..mpuError location: .mpu0829The .mpu Reserve field must be populated with an alphanumeric value.Populate the .mpu Reserve field with an alphanumeric value. · .mpuAction: Populate the .mpu Reserve field with an alphanumeric value.Error location: .mpu0830The .mpu Mail Piece Unit – Weight field must be populated with a numeric value.Populate the .mpu Mail Piece Unit – Weight field with a numeric value. · .mpuAction: Populate the .mpu Mail Piece Unit – Weight field with a numeric value.Error location: .mpu0831The .mpu Mail Piece Unit – Length field must be populated with a numeric value.Populate the .mpu Mail Piece Unit – Length field with a numeric value. · .mpuAction: Populate the .mpu Mail Piece Unit – Length field with a numeric value.Error location: .mpu0832The .mpu Mail Piece Unit – Width field must be populated with a numeric value.Populate the .mpu Mail Piece Unit – Width field with a numeric value. · .mpuAction: Populate the .mpu Mail Piece Unit – Width field with a numeric value.Error location: .mpu0833The .mpu Mail Piece Unit – Thickness field must be populated with a numeric value.Populate the .mpu Mail Piece Unit – Thickness field with a numeric value. · .mpuAction: Populate the .mpu Mail Piece Unit – Thickness field with a numeric value.Error location: .mpu0834Numeric Data Type Error: Mail Piece Unit – Periodical Ad % must be a numeric value in the .mpu file..mpuError location: .mpu0836The .mpu Pre-Denominated Amount field must be populated with a numeric value.Populate the .mpu Pre-Denominated Amount field with a numeric value. · .mpuAction: Populate the .mpu Pre-Denominated Amount field with a numeric value.Error location: .mpu0839The .mpu MPU – Weight Source field value provided was {1}; it must contain A = Agent (real-time), C = Calculated (formula), P = Postal (clerk), L = Logical (implied from rate).Populate the .mpu MPU – Weight Source field with A, C, P, or L. · .mpuAction: Populate the .mpu MPU – Weight Source field with A, C, P, or L.Error location: .mpu0840The .mpu MPU – Weight Status field value provided was {1}; it must contain N, P, F, or M. N = None Given, P = Pending, F = Final, M = Man Wt (function of Rate, not actual).Populate the .mpu MPU – Weight Status field with N, P, F, or M. · .mpuAction: Populate the .mpu MPU – Weight Status field with N, P, F, or M.Error location: .mpu0841For .mpu File Processing, the .mpu MPU Periodical Ad % Status field contains an invalid value; it must contain N, P, or F..mpuError location: .mpu0842The .mpu Mail Piece Unit – Class field value provided was {1}; it must contain 1, 2, 3, 4, or 5. 1 = First Class, 2 = Periodicals, 3 = Std Mail, 4 = Pkg Services, 5 = Per Pending.Populate the .mpu Mail Piece Unit – Class field with 1, 2, 3, 4, or 5. · .mpuAction: Populate the .mpu Mail Piece Unit – Class field with 1, 2, 3, 4, or 5.Error location: .mpu0843The .mpu Mail Piece Unit - Rate Type field value provided was {1}; it must contain R, N, L, S, C, B, F, T, E, E1, E2, E7, D, J, O, K, W, Y, T1, T2, T3, T4, T5, D1, D2, D3, D4, D5, D6, D7, D8, D9, or D0.Populate the .mpu Mail Piece Unit Rate field with R, N, L, S, C, B, F, T, E, E1, E2, E7, D, J, O, K, W, Y, T1, T2, T3, T4, T5, D1, D2, D3, D4, D5, D6, D7, D8, D9, or D0. · .mpuAction: Populate the .mpu Mail Piece Unit Rate field with R, N, L, S, C, B, F, T, E, E1, E2, E7, D, J, O, K, W, Y, T1, T2, T3, T4, T5, D1, D2, D3, D4, D5, D6, D7, D8, D9, or D0.Error location: .mpu0844The .mpu Rate Schedule field value provided was {1}; it must contain R = Retail when populated.Populate the .mpu Rate Schedule field with R = Retail when populated. · .mpuAction: Populate the .mpu Rate Schedule field with R = Retail when populated.Error location: .mpu0846The .mpu MPU Surcharge field value provided was {1}; it must contain N = Not Oversized, O = Single PC Non-Std Surcharge, Q = Residual Shape Surcharge, R = Non-Mach Surcharge, S = Presort Non-Std Surcharge, D = Dim Weight-Rectangular, T = Dim Weight-Non-Rectangular, 1 = Parcel > 84” < 108”, or 2 = Parcel > 108” < 130”.Populate the .mpu MPU Surcharge field with N, O, Q, R, S, D, T, 1, or 2. · .mpuAction: Populate the .mpu MPU Surcharge field with N, O, Q, R, S, D, T, 1, or 2.Error location: .mpu0848The .mpu Postage Affixed Type field value provided was{1}; it must contain S or M. S = Stamp or M = Meter.Populate the .mpu Postage Affixed Type field with S or M. · .mpuAction: Populate the .mpu Postage Affixed Type field with S or M.Error location: .mpu0850The .mpu MPU Record Status field value provided was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .mpu MPU Record Status field with O = Original, D = Delete, I = Insert, or U = Update. · .mpuAction: Populate the .mpu MPU Record Status field with O = Original, D = Delete, I = Insert, or U = Update.Error location: .mpu0851The .mpu Closing Character field value provided was {1}; it must contain #.Populate the .mpu Closing Character field with #. · .mpuAction: Populate the .mpu Closing Character field with #.Error location: .mpu0853For .mpu File Processing, the .mpu MPU Periodical Ad% Status is P or F so .mpu MPU Periodical Ad % must be <= 100..mpuError location: .mpu0855The .mpu Machinability Indicator value provided was{1}; it must contain Y = Machinable on ASFM 100, U = Machinable on USFM 1000, or N = Not Machinable when .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals or 5 = Per Pending and .mpu Mail Piece Unit – Processing Category is populated with FL = Flats.Populate the .mpu Machinability Indicator field with Y, U, or N, when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats. · .mpu Multiple fieldsAction: Populate the .mpu Machinability Indicator field with Y, U, or N, when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats.Error location: .mpu Multiple fields0856The .mpu Mail Piece Unit – Processing Category field value provided was {1}; it must contain LT = Letter, CD = Cards, FL = Flats, PF, Parcel, First Class, MP = Machinable Parcel, IR = Nonstandard Parcel, or NP = Non Machinable Parcels when .mpu Mail Piece Unit – Class field is populated with 1. 1 = First Class.Populate the .mpu Mail Piece Unit – Processing Category field with LT = Letter, CD = Cards, FL = Flats, PF, Parcel, First Class, MP = Machinable Parcel, IR = Nonstandard Parcel, or NP = Non Machinable Parcels when .mpu Mail Piece Unit – Class field is populated with 1. · .mpu Multiple fieldsAction: Populate the .mpu Mail Piece Unit – Processing Category field with LT = Letter, CD = Cards, FL = Flats, PF, Parcel, First Class, MP = Machinable Parcel, IR = Nonstandard Parcel, or NP = Non Machinable Parcels when .mpu Mail Piece Unit – Class field is populated with 1.Error location: .mpu Multiple fields0857The .mpu Mail Piece Unit - Rate Type field value provided was {1}; it must contain R, J, O, K, Y, E, E1, E2, E7, D1, D2, D3, D4, D5, D6, D7, D8, D9, D0, T, T1, T2, T3, T4, or T5.Populate the .mpu Mail Piece Unit - Rate Type field with R, J, O, K, Y, E, E1, E2, E7, D1, D2, D3, D4, D5, D6, D7, D8, D9, D0, T, T1, T2, T3, T4, or T5 when the .mpu Mail Piece Unit - Class field is populated with 1. · .mpu Multiple fieldsAction: Populate the .mpu Mail Piece Unit - Rate Type field with R, J, O, K, Y, E, E1, E2, E7, D1, D2, D3, D4, D5, D6, D7, D8, D9, D0, T, T1, T2, T3, T4, or T5 when the .mpu Mail Piece Unit - Class field is populated with 1.Error location: .mpu Multiple fields0858The .mpu Mail Piece Unit – Processing Category field value provided was {1}; it must contain LT = Letter, FL = Flats, IR = Nonstandard Parcel, MP = Machinable Parcel, or NP = Non Machinable Parcels when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals.Populate the .mpu Mail Piece Unit – Processing Category field with LT = Letter, FL = Flats, IR = Nonstandard Parcel, MP = Machinable Parcel, or NP = Non Machinable Parcels when the .mpu Mail Piece Unit – Class field is populated with 2. · .mpu Multiple fieldsAction: Populate the .mpu Mail Piece Unit – Processing Category field with LT = Letter, FL = Flats, IR = Nonstandard Parcel, MP = Machinable Parcel, or NP = Non Machinable Parcels when the .mpu Mail Piece Unit – Class field is populated with 2.Error location: .mpu Multiple fields0859The .mpu Mail Piece Unit – Rate Type field value provided was {1}; it must contain R = Regular (US/MEX/CAN), N = Nonprofit, S = Science of Agriculture, C = Classroom, W = Science of Agriculture Limited Circulation, or Y = Regular Limited Circulation when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals.Populate the .mpu Mail Piece Unit – Rate Type field with R, N, S, C, W, or Y when the .mpu Mail Piece Unit – Class field is populated with 2. · .mpu Multiple fieldsAction: Populate the .mpu Mail Piece Unit – Rate Type field with R, N, S, C, W, or Y when the .mpu Mail Piece Unit – Class field is populated with 2.Error location: .mpu Multiple fields0860The .mpu Mail Piece Unit – Processing Category field value provided was {1}; it must contain LT = Letter, FL = Flats, MP = Machinable Parcel, IR = Nonstandard Parcel, PF = Parcel, First Class, or CM = Custom Mail when the .mpu Mail Piece Unit – Class field is populated with 3 = Std Mail.Populate the .mpu Mail Piece Unit – Processing Category field with LT = Letter, FL = Flats, MP = Machinable Parcel, IR = Nonstandard Parcel, PF = Parcel, First Class, or CM = Custom Mail when the .mpu Mail Piece Unit – Class field is populated with 3. · .mpu Multiple fieldsAction: Populate the .mpu Mail Piece Unit – Processing Category field with LT = Letter, FL = Flats, MP = Machinable Parcel, IR = Nonstandard Parcel, PF = Parcel, First Class, or CM = Custom Mail when the .mpu Mail Piece Unit – Class field is populated with 3.Error location: .mpu Multiple fields0861The .mpu Mail Piece Unit – Rate Type field contains an invalid value; it must contain R = Regular (US/MEX/CAN), N = Nonprofit, or T = Priority when the .mpu Mail Piece Unit – Class field is populated with 3 = Std Mail.Populate the .mpu Mail Piece Unit Rate Type field with R, N, or T when the .mpu Mail Piece Unit – Class field is populated with 3. · .mpu Multiple fieldsAction: Populate the .mpu Mail Piece Unit Rate Type field with R, N, or T when the .mpu Mail Piece Unit – Class field is populated with 3.Error location: .mpu Multiple fields0862The .mpu Mail Piece Unit – Processing Category field value provided was {1}; it must contain FL = Flats, MP = Machinable Parcel, IR = Nonstandard Parcel, or NP = Non Machinable Parcels when the .mpu Mail Piece Unit – Class field is populated with 4 = Pkg Services.Populate the .mpu Mail Piece Unit – Processing Category field with FL = Flats, MP, IR, or NP when the .mpu Mail Piece Unit – Class field is populated with 4. · .mpu Multiple fieldsAction: Populate the .mpu Mail Piece Unit – Processing Category field with FL = Flats, MP, IR, or NP when the .mpu Mail Piece Unit – Class field is populated with 4.Error location: .mpu Multiple fields0863The .mpu Mail Piece Unit - Rate Type field value provided was {1}; it must B = Bound Printed Matter, L = Library, F = Media, or D = Parcel Select when the .mpu Mail Piece Unit - Class field is populated with 4.Populate the .mpu Mail Piece Unit Rate Type field with B, L, F, or D when the .mpu Mail Piece Unit - Class field is populated with 4. · .mpuAction: Populate the .mpu Mail Piece Unit Rate Type field with B, L, F, or D when the .mpu Mail Piece Unit - Class field is populated with 4.Error location: .mpu0864The .mpu Mail Piece Unit – Processing Category field value provided was {1}; it must contain LT = Letter, FL = Flats, IR = Nonstandard Parcel, MP = Machinable Parcel, or NP = Non Machinable Parcels when the .mpu Mail Piece Unit – Class field is populated with 5 = Per Pending.Populate the .mpu Mail Piece Unit – Processing Category field LT = Letter, FL = Flats, IR = Nonstandard Parcel, MP = Machinable Parcel, or NP = Non Machinable Parcels when the .mpu Mail Piece Unit – Class field is populated with 5. · .mpu Multiple fieldsAction: Populate the .mpu Mail Piece Unit – Processing Category field LT = Letter, FL = Flats, IR = Nonstandard Parcel, MP = Machinable Parcel, or NP = Non Machinable Parcels when the .mpu Mail Piece Unit – Class field is populated with 5.Error location: .mpu Multiple fields0865The .mpu Mail Piece Unit – Rate Type field value provided was{1}; it must contain R = Regular (US/MEX/CAN), N = Nonprofit, S = Science of Agriculture, C = Classroom, W = Science of Agriculture Limited Circulation, or Y = Regular Limited Circulation when the .mpu Mail Piece Unit – Class field is populated with 5 = Per Pending.Populate the .mpu Mail Piece Unit Rate Type field with R, N, S, C, W, or Y when the .mpu Mail Piece Unit – Class field is populated with 5. · .mpu Multiple fieldsAction: Populate the .mpu Mail Piece Unit Rate Type field with R, N, S, C, W, or Y when the .mpu Mail Piece Unit – Class field is populated with 5.Error location: .mpu Multiple fields0870There can be no characters after the .mpu Closing Character field.Remove all characters after the .mpu Closing Character field. · .mpuAction: Remove all characters after the .mpu Closing Character field.Error location: .mpu0871There is a missing .mpu record for the .seg file when the .hdr Presentation Category field is populated with P = Conventional Presort or M = MLOCR. The value provided was {1}.Populate an .mpu record for the .seg file when the .hdr Presentation Category field is populated with P or M. · Multiple filesAction: Populate an .mpu record for the .seg file when the .hdr Presentation Category field is populated with P or M.Error location: Multiple files0873For .mpu File Processing, there is a missing .mpu record matching .cqt Mail Piece Unit ID field.Populate an .mpu record matching the .cqt Mail Piece Unit ID field. · Multiple filesAction: Populate an .mpu record matching the .cqt Mail Piece Unit ID field.Error location: Multiple files0879Alphanumeric Data Type Error: The .oci Original Job ID field must be populated with an alphanumeric value.Populate the .oci Original Job ID field with an alphanumeric value. · .ociAction: Populate the .oci Original Job ID field with an alphanumeric value.Error location: .oci0880Alphanumeric Data Type Error: The .oci Original Segment ID field must be populated with an alphanumeric value.Populate the .oci Original Segment ID field with an alphanumeric value. · .ociAction: Populate the .oci Original Segment ID field with an alphanumeric value.Error location: .oci0881Alphanumeric Data Type Error: The .oci Original Display Container ID field must be populated with an alphanumeric valuePopulate the .oci Original Display Container ID field with an alphanumeric value. · .ociAction: Populate the .oci Original Display Container ID field with an alphanumeric value.Error location: .oci0882Alphanumeric Data Type Error: the .oci Original Label: IM Container or IM Tray Barcode field must be populated with an alphanumeric value.Populate the .oci Original Label: IM Container or IM Tray Barcode field with an alphanumeric value. · .ociAction: Populate the .oci Original Label: IM Container or IM Tray Barcode field with an alphanumeric value.Error location: .oci0883Alphanumeric Data Type Error: the .oci Original Mail.XML Mailing Group ID field must be populated with an alphanumeric value.Populate the .oci Original Mail.XML Mailing Group ID field with an alphanumeric value. · .ociAction: Populate the .oci Original Mail.XML Mailing Group ID field with an alphanumeric value.Error location: .oci0884Alphanumeric Data Type Error: the .oci Original Mail.XML Customer Group ID field must be populated with an alphanumeric value.Populate the .oci Original Mail.XML Customer Group ID field with an alphanumeric value. · .ociAction: Populate the .oci Original Mail.XML Customer Group ID field with an alphanumeric value.Error location: .oci0885Alphanumeric Data Type Error: the .oci Reserve field must be populated with an alphanumeric value.Populate the .oci Reserve field with an alphanumeric value. · .ociAction: Populate the .oci Reserve field with an alphanumeric value.Error location: .oci0886Alphanumeric Data Type Error: The .oci Job ID field must be populated with an alphanumeric value.Populate the .oci Job ID field with an alphanumeric value. · .ociAction: Populate the .oci Job ID field with an alphanumeric value.Error location: .oci0887Numeric Data Type Error: The .oci Container ID field must be populated with a numeric value.Populate the .oci Container ID field with a numeric value. · .ociAction: Populate the .oci Container ID field with a numeric value.Error location: .oci0888Numeric Data Type Error: The .oci Original Container ID field must be populated with a numeric value.Populate the .oci Original Container ID field with a numeric value. · .ociAction: Populate the .oci Original Container ID field with a numeric value.Error location: .oci0889Numeric Data Type Error: Original Mail.XML Container ID must be a numeric value in the .oci file.Populate the .oci Original Mail.XML Container ID field with a numeric value. · .ociAction: Populate the .oci Original Mail.XML Container ID field with a numeric value.Error location: .oci0890The value provided for The .oci OCI Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .oci Record Status field with O = Original, D = Delete, I = Insert, or U = Update. · .ociAction: Populate the .oci Record Status field with O = Original, D = Delete, I = Insert, or U = Update.Error location: .oci0891The value provided for The .oci Closing Character field was {1}; it must contain #.Populate the .oci Closing Character field with #. · .ociAction: Populate the .oci Closing Character field with #.Error location: .oci0895Duplicate Record Found: Each .oci record must have a unique combination of Original Job ID, Original User License Code, and Original Container ID.Populate each record in the .oci file with a unique combination of Original Job ID, Original User License Code, and Original Container ID. · .ociAction: Populate each record in the .oci file with a unique combination of Original Job ID, Original User License Code, and Original Container ID.Error location: .oci0898The value provided for the .cpt Periodical Ad % Treatment field was {1}; it must contain B, N, S B = Ad % not counted, CPT weight added to base piece, N = Not applicable, S = Carries own Ad Percentage or blank.Populate the .cpt Periodical Ad% Treatment field with B, N, S or leave blank. · .cptAction: Populate the .cpt Periodical Ad% Treatment field with B, N, S or leave blank.Error location: .cpt0900The value provide for the .cqt Periodicals: Not County/In County field was {1}; it must contain I = In-County or N = Not County.Populate the .cqt Periodicals: Not County/In County field with I or N. · .cqtAction: Populate the .cqt Periodicals: Not County/In County field with I or N.Error location: .cqt0901The value provided for The .cqt Periodicals: Sub / Non-Sub / Requestor Indicator field was {1}; it must contain S = Sub N = Non R = Requester or O = Other.Populate the .cqt Periodicals: Sub / Non-Sub / Requestor Indicator field with S, N, R, or O. · .cqtAction: Populate the .cqt Periodicals: Sub / Non-Sub / Requestor Indicator field with S, N, R, or O.Error location: .cqt0902The .cqt Periodicals Co-Palletization Discount Indicator field was {1}; it must contain. “Y” = Yes; “N” = No.Populate the .cwt Periodicals Co-Palletization Discount Indicator field with Y or N. · .cqtAction: Populate the .cwt Periodicals Co-Palletization Discount Indicator field with Y or N.Error location: .cqt0911The .pqt Package Level field value provided was {1}; it must be populated with A = Firm when the .cqt Rate Category field is populated FB = Firm Bundle.Populate the .pqt Package Level field with A when the .cqt Rate Category field is populated with FB. · .pqt, .cqtAction: Populate the .pqt Package Level field with A when the .cqt Rate Category field is populated with FB.Error location: .pqt, .cqt0918Required Field Missing: Job ID is a required field in the .pqt file.Populate the .pqt Job ID field. · .pqtAction: Populate the .pqt Job ID field.Error location: .pqt0919Required Field Missing: CQT Database ID is a required field in the .pqt file.Populate the .pqt CQT Database ID field. · .pqtAction: Populate the .pqt CQT Database ID field.Error location: .pqt0920Required Field Missing: Package ID is a required field in the .pqt file.Populate the .pqt Package ID field. · .pqtAction: Populate the .pqt Package ID field.Error location: .pqt0921Required Field Missing: Package Zip Code is a required field in the .pqt file.Populate the .pqt Package Zip Code field. · .pqtAction: Populate the .pqt Package Zip Code field.Error location: .pqt0922Required Field Missing: Number of Copies is a required field in the .pqt filePopulate the .pqt Number of Copies field. · .pqtAction: Populate the .pqt Number of Copies field.Error location: .pqt0923Required Field Missing: Number of Pieces is a required field in the .pqt file.Populate the .pqt Number of Pieces field. · .pqtAction: Populate the .pqt Number of Pieces field.Error location: .pqt0924Required Field Missing: PQT Record Status is a required field in the .pqt file.Populate the .pqt PQT Record Status field. · .pqtAction: Populate the .pqt PQT Record Status field.Error location: .pqt0925Required Field Missing: Package Level is a required field in the .pqt file.Populate the .pqt Package Level field. · .pqtAction: Populate the .pqt Package Level field.Error location: .pqt0926Required Field Missing: Closing Character is a required field in the .pqt file.Populate the .pqt Closing Character field. · .pqtAction: Populate the .pqt Closing Character field.Error location: .pqt0927The .pqt Job ID field must be populated with an alphanumeric value.Populate the .pqt Job ID field with an alphanumeric value. · .pqtAction: Populate the .pqt Job ID field with an alphanumeric value.Error location: .pqt0928The .pqt Package ID field must be populated with an alphanumeric value.Populate the .pqt Package ID field with an alphanumeric value. · .pqtAction: Populate the .pqt Package ID field with an alphanumeric value.Error location: .pqt0929The .pqt Package ZIP Code field must be populated with an alphanumeric value.Populate the .pqt Package Zip Code field with an alphanumeric value. · .pqtAction: Populate the .pqt Package Zip Code field with an alphanumeric value.Error location: .pqt0931The .pqt Reserve field must be populated with an alphanumeric value (when populated).Populate the .pqt Reserve field with an alphanumeric value when populated. · .pqtAction: Populate the .pqt Reserve field with an alphanumeric value when populated.Error location: .pqt0932The .pqt Package Carrier Route field must be populated with an alphanumeric value (when populated).Populate the .pqt Package Carrier Route field with an alphanumeric value when populated. · .pqtAction: Populate the .pqt Package Carrier Route field with an alphanumeric value when populated.Error location: .pqt0933The .pqt CQT Database ID field must be populated with a numeric value.Populate the .pqt CQT Database ID field with a numeric value. · .pqtAction: Populate the .pqt CQT Database ID field with a numeric value.Error location: .pqt0934The .pqt Number of Copies field must be populated with a numeric value.Populate the .pqt Number of Copies field with a numeric value. · .pqtAction: Populate the .pqt Number of Copies field with a numeric value.Error location: .pqt0935The .pqt Number of Pieces field must be populated with a numeric value.Populate the .pqt Number of Pieces field with a numeric value. · .pqtAction: Populate the .pqt Number of Pieces field with a numeric value.Error location: .pqt0936The .pqt Bundle Charge Allocation field must be populated with a numeric value (when populated).Populate the .pqt Bundle Charge Allocation field with a numeric value when populated. · .pqtAction: Populate the .pqt Bundle Charge Allocation field with a numeric value when populated.Error location: .pqt0938The .pqt PQT Record Status field value provided was {1}; it must contain O = Original, D = Delete, I = Insert or U = Update.Populate the .pqt PQT Record Status field with O = Original, D = Delete, I = Insert, or U = Update. · .pqtAction: Populate the .pqt PQT Record Status field with O = Original, D = Delete, I = Insert, or U = Update.Error location: .pqt0939The .pqt Package Carrier Route field value provided was {1}; it must begin with C, R, H, B, or G (Valid Carrier Route Prefix) followed by 3 numbers with no illegal meta characters.Populate the .pqt Package Carrier Route field with a value that begins with C, R, H, B, or G followed by a 3 numbers with no illegal meta characters. · .pqtAction: Populate the .pqt Package Carrier Route field with a value that begins with C, R, H, B, or G followed by a 3 numbers with no illegal meta characters.Error location: .pqt0940The .pqt Closing Character field value provided was {1}; it must contain # sign.Populate the .pqt Closing Character field with #. · .pqtAction: Populate the .pqt Closing Character field with #.Error location: .pqt0944Each .pqt record must have a unique combination of Job ID, CQT Database ID, and Package ID.Populate each .pqt record with a unique combination of the following fields: Job ID, CQT Database ID, and Package ID. · .pqt Multiple fieldsAction: Populate each .pqt record with a unique combination of the following fields: Job ID, CQT Database ID, and Package ID.Error location: .pqt Multiple fields0945There must be no characters after the Closing Character.Remove all characters after the .pqt Closing Character field. · .pqtAction: Remove all characters after the .pqt Closing Character field.Error location: .pqt0952Required Field Missing: Job ID is a required field in the .seg file.Populate .seg Job ID field. · .segAction: Populate .seg Job ID field.Error location: .seg0953Required Field Missing: Segment ID is a required field in the .seg file.Populate .seg Segment ID field. · .segAction: Populate .seg Segment ID field.Error location: .seg0955Required Field Missing: Logical/Physical Container Indicator is a required field in the .seg filePopulate .seg Logical/Physical Container Indicator field. · .segAction: Populate .seg Logical/Physical Container Indicator field.Error location: .seg0956Required Field Missing: Log/Phy Package Indicator is a required field in the .seg file.Populate .seg Log/Phy Package Indicator field. · .segAction: Populate .seg Log/Phy Package Indicator field.Error location: .seg0957Required Field Missing: LOT Database Date is a required field in the .seg file.Populate .seg LOT Database Date field. · .segAction: Populate .seg LOT Database Date field.Error location: .seg0958Required Field Missing: Verification Facility Name is a required field in the .seg file.Populated .seg Verification Facility Name field. · .segAction: Populated .seg Verification Facility Name field.Error location: .seg0959Required Field Missing: Verification Facility ZIP+4 is a required field in the .seg file.Populate .seg Verification Facility ZIP+4 field. · .segAction: Populate .seg Verification Facility ZIP+4 field.Error location: .seg0960Required Field Missing: Automation Coding Date is a required field in the .seg file.Populate .seg Automation Coding Date field. · .segAction: Populate .seg Automation Coding Date field.Error location: .seg0961Required Field Missing: Carrier Route Coding Date is a required field in the .seg file.Populate .seg Carrier Route Coding Date field. · .segAction: Populate .seg Carrier Route Coding Date field.Error location: .seg0962Required Field Missing: Carrier Route Sequencing Date is a required field in the .seg file.Populate .seg Carrier Route Sequencing Date field. · .segAction: Populate .seg Carrier Route Sequencing Date field.Error location: .seg0963Required Field Missing: Mail Facility ID is a required field in the .seg file..segError location: .seg0964Required Field Missing: SEG Record Status is a required field in the .seg file.Populate .seg SEG Record Status field. · .segAction: Populate .seg SEG Record Status field.Error location: .seg0965Required Field Missing: Closing Character is a required field in the .seg file.Populate .seg Closing Character field. · .segAction: Populate .seg Closing Character field.Error location: .seg0966The .seg Segment ID field must be populated with an alphanumeric value.Populate .seg Segment ID field with alphanumeric value. · .segAction: Populate .seg Segment ID field with alphanumeric value.Error location: .seg0967The .seg Segment Description field must be populated with an alphanumeric value.Populate .seg Segment Description field with alphanumeric value · .segAction: Populate .seg Segment Description field with alphanumeric valueError location: .seg0969The .seg Verification Facility Name field must be populated with an alphanumeric value.Populate .seg Verification Facility Name field with alphanumeric value. · .segAction: Populate .seg Verification Facility Name field with alphanumeric value.Error location: .seg0972Alphanumeric Data Type Error: Mail Facility ID must be an alphanumeric value in the .seg file..segError location: .seg0973The .seg MPA ID for Container and Bundle Charge Method field must be populated with an alphanumeric value.Populate .seg MPA ID for Container and Bundle Charge Method field with alphanumeric value. · .segAction: Populate .seg MPA ID for Container and Bundle Charge Method field with alphanumeric value.Error location: .seg0974Alphanumeric Data Type Error: CSA Agreement ID must be an alphanumeric value in the .seg file..segError location: .seg0975The .seg User Option Field must be populated with an alphanumeric value.Populate .seg User Option field with alphanumeric value. · .segAction: Populate .seg User Option field with alphanumeric value.Error location: .seg0976The .seg Reserve field must be populated with an alphanumeric value.Populate .seg Reserve field with alphanumeric value. · .segAction: Populate .seg Reserve field with alphanumeric value.Error location: .seg0977Numeric Data Type Error: Verification Facility ZIP+4 to be a numeric value in the .seg file.Populate .seg Verification Facility ZIP+4 with a numeric value. · .segAction: Populate .seg Verification Facility ZIP+4 with a numeric value.Error location: .seg0978Date Data Type Error: LOT Database Date must be a valid numeric value formatted as YYYYMMDD in the .seg file.Populate .seg LOT Database Date field with a valid numeric value formatted as YYYYMMDD. · .segAction: Populate .seg LOT Database Date field with a valid numeric value formatted as YYYYMMDD.Error location: .seg0979Date Data Type Error: Automation Coding Date must be a valid numeric value formatted as YYYYMMDD in the .seg file since automation mail exists.Populate .seg Automation Coding Date field with a valid numeric value formatted as YYYYMMDD. · .segAction: Populate .seg Automation Coding Date field with a valid numeric value formatted as YYYYMMDD.Error location: .seg0980Date Data Type Error: Carrier Route Coding Date must be a valid numeric value formatted as YYYYMMDD in the .seg file since carrier route mail exists.Populate .seg Carrier Route Sequence Date field with a valid numeric value formatted as YYYYMMDD. · .segAction: Populate .seg Carrier Route Sequence Date field with a valid numeric value formatted as YYYYMMDD.Error location: .seg0981Date Data Type Error: Carrier Route Sequencing Date must be a valid numeric value formatted as YYYYMMDD in the .seg file since carrier route walk sequence mail exists.Populate .seg Carrier Route Sequencing Date field with a valid numeric value formatted as YYYYMMDD. · .segAction: Populate .seg Carrier Route Sequencing Date field with a valid numeric value formatted as YYYYMMDD.Error location: .seg0982Date Data Type Error: Move Update Date must be a valid numeric value formatted as YYYYMMDD in the .seg file.Populate .seg Move Update Date field with a valid numeric value formatted as YYYYMMDD. · .segAction: Populate .seg Move Update Date field with a valid numeric value formatted as YYYYMMDD.Error location: .seg0985Date Data Type Error: Zone Matrix Date must be a valid numeric value formatted as YYYYMMDD in the .seg file..segError location: .seg0986The .seg Principal Processing Category field value provided was {1}; it must contain LT = Letter, FL = Flat, CD = Card, CM = Custom Mail, MP = Machinable Parcel, IR = Nonstandard Parcel, or PF = Parcel, First Class.Populate .seg Principal Processing Category field with LT = Letter, FL = Flat, CD = Card, CM = Custom Mail, MP = Machinable Parcel, IR = Nonstandard Parcel, or PF = Parcel, First Class. · .segAction: Populate .seg Principal Processing Category field with LT = Letter, FL = Flat, CD = Card, CM = Custom Mail, MP = Machinable Parcel, IR = Nonstandard Parcel, or PF = Parcel, First Class.Error location: .seg0987The .seg Substituted Container Prep field value provided was {1}; it must contain S = Sacks or T = Trays.Populate .seg Substituted Container Prep field with S = Sacks for Trays or T = Trays for Sacks. · .segAction: Populate .seg Substituted Container Prep field with S = Sacks for Trays or T = Trays for Sacks.Error location: .seg0988The .seg Periodicals Newspaper Treatment field value provided was {1}; it must contain Y =Yes or N=No.Populate .seg Periodicals Newspaper Treatment field with Y = Yes or N = No. · .segAction: Populate .seg Periodicals Newspaper Treatment field with Y = Yes or N = No.Error location: .seg0989The .seg Logical/Physical Container Indicator field value provided was {1}; it must contain L = Logical container or P = Physical container.Populate .seg Logical/Physical Container Indicator field with L = Logical Container or P = Physical Container. · .segAction: Populate .seg Logical/Physical Container Indicator field with L = Logical Container or P = Physical Container.Error location: .seg0990The .seg Log/Phy Package Indicator field value provided was {1}; it must contain L=Logical Package or P= Physical package.Populate .seg Log/Phy Package Indicator field with L = Logical Package or P = Physical Package. · .segAction: Populate .seg Log/Phy Package Indicator field with L = Logical Package or P = Physical Package.Error location: .seg0993The .seg LOT Direction Indicator field value provided was {1}; it must contain F = Forward R = Reverse.Populate .seg LOT Direction Indicator field with F = Forward or R = Reverse. · .segAction: Populate .seg LOT Direction Indicator field with F = Forward or R = Reverse.Error location: .seg0994The .seg Barcode Verifier Indicator field value provided was {1}; it must contain Y=Yes or N=No.Populate .seg Barcode Verifier Indicator field with Y = Yes or N = No. · .segAction: Populate .seg Barcode Verifier Indicator field with Y = Yes or N = No.Error location: .seg0997The .seg Detached Mailing Label Indicator field value provided was {1}; it must contain A = Detached Address Label, C = Plus One with Flats, or blank = Not applicable.Populate .seg Detached Mailing Label Indicator field with A = Detached Address Label, C = Plus One with Flats, or blank = Not applicable. · .segAction: Populate .seg Detached Mailing Label Indicator field with A = Detached Address Label, C = Plus One with Flats, or blank = Not applicable.Error location: .seg0998The .seg Mailing Agreement Type field value provided was {1}; when populated, it must contain A = Alternate Mailing System, B = Optional Procedure, C = Reserved, D = Value Added, E = Combined Mail, F = Combined and Value Added, G = Manifest Mailing Itemized, or H = Manifest Mailing Batch.Populate .seg Mailing Agreement Type field with A = Alternate Mailing System, B = Optional Procedure, C = Reserved, D = Value Added, E = Combined Mail, F = Combined and Value Added, G = Manifest Mailing Itemized, or H = Manifest Mailing Batch. · .segAction: Populate .seg Mailing Agreement Type field with A = Alternate Mailing System, B = Optional Procedure, C = Reserved, D = Value Added, E = Combined Mail, F = Combined and Value Added, G = Manifest Mailing Itemized, or H = Manifest Mailing Batch.Error location: .seg0999The .seg Container and Bundle Charge Method field value provided was {1}; it must contain0 – no publications in the mailing 1 – Charge all to a 3rd party2 – Charge all to one of the publications or3 – proportion by copies to each of the publications.Populate .seg Container and Bundle Charge Method field with 0 = no publications in the mailing, 1 = Charge all to a 3rd party, 2 = Charge all to one of the publications, or 3 = proportion by copies to each of the publications. · .segAction: Populate .seg Container and Bundle Charge Method field with 0 = no publications in the mailing, 1 = Charge all to a 3rd party, 2 = Charge all to one of the publications, or 3 = proportion by copies to each of the publications.Error location: .seg1001The Seamless Acceptance Indicator field contains an invalid value; it must contain 1, 2 or blank..segError location: .seg1002The .seg Less Than a Presort Segment Presentation field value provided was {1}; it must contain Y =Yes or N=No when populated.Populate .seg Less Than a Presort Segment Presentation field with Y = Partial or N = Full Presort when populated. · .segAction: Populate .seg Less Than a Presort Segment Presentation field with Y = Partial or N = Full Presort when populated.Error location: .seg1003The .seg Full-Service Participation Indicator field value provided was {1}; it must contain F = Full Service Option, M = Mixed (Basic and Full Mixed) or blank= None.Populate .seg Full-Service Participation Indicator field with F = Full Service Option, M = Mixed (Basic and Full Mixed) or blank = none. · .segAction: Populate .seg Full-Service Participation Indicator field with F = Full Service Option, M = Mixed (Basic and Full Mixed) or blank = none.Error location: .seg1010The .pdr Move Update Method field value provided was {1}; it must contain 0 = None 1 = ACS 2 = NCOA Link 3 = FAST Forward 4 = Mailer Move Update Process Certification/Alternative method (99% rule, legal restraint, 100% newly acquired from addressee) 5 = Ancillary Service Endorsements 6 = Multiple 7 = Simplified/Occupant/Exceptional/Alternative Address Format – No move update method needed for this code or 8 = OneCode ACS (when populated).Populate the .pdr Move Update Method field with 0, 1, 2, 3, 4, 5, 6, 7, or 8 when populated. · .pdrAction: Populate the .pdr Move Update Method field with 0, 1, 2, 3, 4, 5, 6, 7, or 8 when populated.Error location: .pdr1012The .seg Move Update Method field value provided was {1}; it must contain 0 = None 1 = ACS 2 = NCOA Link 4 = Mailer Move Update Process Certification/Alternative method (99% rule, legal restraint, 100% newly acquired from addressee) 5 = Ancillary Service Endorsements 6 = Multiple 7 = Simplified/Occupant/Exceptional/Alternative Address Format – No move update method needed for this code or 8 = OneCode ACS (when populated).Populate .seg Move Update Method field with 0, 1, 2, 4, 5, 6, 7, or 8 (when populated). · .segAction: Populate .seg Move Update Method field with 0, 1, 2, 4, 5, 6, 7, or 8 (when populated).Error location: .seg1013The .seg SEG Record Status field contains an invalid value; it must contain O = Original, D = Delete record, I = Insert record, if not match previous Keys, U = Update with this record, if match to Keys.Populate .seg SEG Record Status field with O = Original, D = Delete, I = Insert, or U = Update. · .segAction: Populate .seg SEG Record Status field with O = Original, D = Delete, I = Insert, or U = Update.Error location: .seg1015Move Update Date is a required field in the .seg file when the Move Update Method field is not populated with 0 = None, 4 = Mailer Move Update Process Certification/Alternative method (99% rule, legal restraint, 100% newly acquired from addressee), 6 = Multiple 7 = Simplified/Occupant/Exceptional/Alternative Address Format – No move update method needed for this code or 8 = One Code ACS. The value provided was {1}.Populate .seg Move Update Date field. · .seg Multiple fieldsAction: Populate .seg Move Update Date field.Error location: .seg Multiple fields1016Required Field Missing: Class Defining Preparation is a required field in the .seg file since Principal Processing Category is populated.Populate .seg Class Defining Preparation field. · .seg Multiple fieldsAction: Populate .seg Class Defining Preparation field.Error location: .seg Multiple fields1017Required Field Missing: Principal Processing Category is a required field in the .seg file since Class Defining Preparation is populated.Populate .seg Principal Processing Category field. · .seg Multiple fieldsAction: Populate .seg Principal Processing Category field.Error location: .seg Multiple fields1019MPA ID for Container and Bundle Charge Method is a required field in the .seg file when the Container and Bundle Charge Method field is populated with 1 =Charge all to a 3rd party or 2=Charge all to one of the publications.Populated .seg MPA ID for Container and Bundle Charge Method field. · .seg Multiple fieldsAction: Populated .seg MPA ID for Container and Bundle Charge Method field.Error location: .seg Multiple fields1020The .seg Closing Character field value provided was {1}; it must contain #.Populated .seg Closing Character field with #. · .segAction: Populated .seg Closing Character field with #.Error location: .seg1021The .seg Principal Processing Category field contains an invalid value; it must container LT = Letter, FL = Flat, CD = Card, PF = Parcel, MP = Machinable Parcel or IR = Nonstandard Parcel when the .seg Class Defining Preparation field is populated with 1= First Class.Populate .seg Principal Processing Category field with LT = Letter FL, CD, PF, MP, IR, or NP when Class Defining Preparation field is 1. · .seg Multiple fieldsAction: Populate .seg Principal Processing Category field with LT = Letter FL, CD, PF, MP, IR, or NP when Class Defining Preparation field is 1.Error location: .seg Multiple fields1022The .seg Principal Processing Category field value provided was {1}; it must contain LT = Letter, FL = Flat, IR = Nonstandard Parcel, MP = Machinable Parcel when the .seg Class Defining Preparation field is populated with 2 = Periodicals.Populate .seg Principal Processing Category field with LT = Letter, FL = Flats, IR = Nonstandard Parcel, or MP = Machinable Parcel when Class Defining Preparation field is 2. · .seg Multiple fieldsAction: Populate .seg Principal Processing Category field with LT = Letter, FL = Flats, IR = Nonstandard Parcel, or MP = Machinable Parcel when Class Defining Preparation field is 2.Error location: .seg Multiple fields1023The .seg Principal Processing Category field value provided was {1}; it must contain LT = Letters, FL = Flats, MP = Machinable Parcel, IR = Nonstandard Parcel, PF = Parcel, First Class, or CM = Custom Mail when the .seg Class Defining Preparation field is populated with 3 = Std Mail.Populate .seg Principal Processing Category field with LT = Letter, FL = Flats, MP = Machinable Parcel, IR = Nonstandard Parcel, PF = Parcel, First Class, or CM = Custom Mail when Class Defining Preparation field is 3. · .seg Multiple fieldsAction: Populate .seg Principal Processing Category field with LT = Letter, FL = Flats, MP = Machinable Parcel, IR = Nonstandard Parcel, PF = Parcel, First Class, or CM = Custom Mail when Class Defining Preparation field is 3.Error location: .seg Multiple fields1024The .seg Principal Processing Category field value provided was {1}; it must container FL = Flat, MP = Machinable Parcel or IR = Nonstandard Parcel when the .seg Class Defining Preparation field is populated with 4 = Pkg Services.Populated .seg Principal Processing Category field with FL = Flats, MP, or IR when Class Defining Preparation field 4. · .seg Multiple fieldsAction: Populated .seg Principal Processing Category field with FL = Flats, MP, or IR when Class Defining Preparation field 4.Error location: .seg Multiple fields1030There can be no characters after the Closing Character.Remove all characters after the .seg Closing Character field. · .segAction: Remove all characters after the .seg Closing Character field.Error location: .seg1035The record with a .csm Container Status of R= Ready to pay, a .mpu Mail Piece Unit – Class of 2= Periodicals, and a .cpt Component – Rate Type of H = Per Ride-Along will be rejected since the .cpt Component – Weight of the ride-along is greater than the maximum allowed single ride-along piece weight. The value provided was {1}.Populate the .cpt Component – Weight field with a value that is within the maximum weight allowed for a single ride-along. · .seg Multiple fieldsAction: Populate the .cpt Component – Weight field with a value that is within the maximum weight allowed for a single ride-along.Error location: .seg Multiple fields1036The record with a .csm Container Status of R = Ready to pay, a .mpu Mail Piece Unit – Class of 2 = Periodicals, and a .cpt Component – Rate Type of H = Per Ride-Along will be rejected since the .mcr Host Component ID is not specified and a host record is found. The value provided was {1}.Populate the .mcr Component ID field when the csm Container Status is R, .mpu Mail Piece Unit – Class is 2, and .cpt Component – Rate Type is H. · .seg Multiple fieldsAction: Populate the .mcr Component ID field when the csm Container Status is R, .mpu Mail Piece Unit – Class is 2, and .cpt Component – Rate Type is H.Error location: .seg Multiple fields1037The record with a .csm Container Status of R = Ready to pay, a .mpu Mail Piece Unit – Class of 2 = Periodicals, and a .cpt Component – Rate Type of H = Per Ride-Along will be rejected since the ride-along component record’s .cpt Component – Weight is greater than the host component record’s Component – Weight. The value provided was {1}.Populate the .cpt Component – Weight field with a value that is within the maximum weight allowed for a single ride-along. · .seg Multiple fieldsAction: Populate the .cpt Component – Weight field with a value that is within the maximum weight allowed for a single ride-along.Error location: .seg Multiple fields1038The record with a .csm Container Status of R = Ready to pay, a .mpu Mail Piece Unit – Class of 2 = Periodicals, and a .cpt Component – Rate Type of H = Per Ride-Along will be rejected since the .mcr Component ID is not specified and multiple .mcr Host Statement Component IDs exist for the .mpu file. The value provided was {1}.Populate the .mcr Component ID field when the csm Container Status is R, .mpu Mail Piece Unit – Class is 2, and .cpt Component – Rate Type is H. · .seg Multiple fieldsAction: Populate the .mcr Component ID field when the csm Container Status is R, .mpu Mail Piece Unit – Class is 2, and .cpt Component – Rate Type is H.Error location: .seg Multiple fields1039The record with a .csm Container Status of R = Ready to pay, a .mpu Mail Piece Unit – Class of 2 = Periodicals or 5 = Per Pending, a .cpt Component – Rate Type of N=non profit, and a Component – Class of 3= Std Mail will be rejected since the Nonprofit permit number associated with the .mcr record does not have a valid application number or authorization number. The value provided was {1}.Populate the .mpa Permit Number that is associated to the .mcr record with a value that has a valid application number or authorization number. · .seg Multiple fieldsAction: Populate the .mpa Permit Number that is associated to the .mcr record with a value that has a valid application number or authorization number.Error location: .seg Multiple fields1040The record with a .csm Container Status of R = Ready to pay, a .mpu Mail Piece Unit – Class of 2=Periodicals or 5 = Per Pending, a .cpt Component – Class/Component – Rate Type of 1=First Class/R= Regular (US/MEX/CAN), 3= Std Mail/R= Regular (US/MEX/CAN), or 3= Std Mail/N= Nonprofit will be rejected since there is no matching finance number. The value provided was {1}.Populate the .mpa Permit Number with a value that maps back to a valid Finance Number. · .seg Multiple fieldsAction: Populate the .mpa Permit Number with a value that maps back to a valid Finance Number.Error location: .seg Multiple fields1041The record with a .csm – Container Status of R = Ready to pay, a .seg – Class Defining Preparation of 2 = Periodicals, a .cpt – Component Class/Component Rate Type of 1 = First Class/R = Regular (US/MEX/CAN), 3 = Std Mail/R = Regular (US/MEX/CAN), or 3 = Std Mail/N = Nonprofit will be rejected since there is no .mpa Postage Payment Method. The value provided was {1}.Populate the .mpa Postage Payment Method field. · .seg Multiple fieldsAction: Populate the .mpa Postage Payment Method field.Error location: .seg Multiple fields1042The record with a .csm Container Status of R = Ready to pay, a .mpu Mail Piece Unit – Class of 2 = Periodicals or 5 = Per Pending, a .cpt Component – Class/Component – Rate Type of 1 = First Class/R = Regular (US/MEX/CAN), 3 = Std Mail/ R = Regular (US/MEX/CAN), or 3 = Std Mail/N = Nonprofit will be rejected since there is no matching .mpa Permit Number.Populate the .mpa Permit Number field. · .seg Multiple fieldsAction: Populate the .mpa Permit Number field.Error location: .seg Multiple fields1043The record with a Container Status of R = Ready to pay, a Class of 2= Periodicals or 5= Per Pending, a Component Class/Component Rate Type of 1=First Class/R= Regular (US/MEX/CAN), 3= Std Mail/R= Regular (US/MEX/CAN), or 3= Std Mail/N= Nonprofit will be rejected since there is no matching .mcr record number. The value provided was {1}.Populate the fields in the .mcr file. · .seg Multiple fieldsAction: Populate the fields in the .mcr file.Error location: .seg Multiple fields1044The record with a .csm Container Status of R=Ready to pay, a .mpu Mail Piece Unit – Class of 2= Periodicals or 5= Per Pending, a .cpt Component – Class/Component – Rate Type of 1=First Class/R= Regular (US/MEX/CAN), 3= Std Mail/R= Regular (US/MEX/CAN), or 3= Std Mail/N= Nonprofit will be rejected since the .mpa USPS Publication Number and .mpa Permit Number are both populated. The value provided was {1}.Populate either the .mpa USPS Publication Number field or the .mpa Permit Number field but not both. · .seg Multiple fieldsAction: Populate either the .mpa USPS Publication Number field or the .mpa Permit Number field but not both.Error location: .seg Multiple fields1045The record with a Container Status of R=Ready to pay, a Class of 2= Periodicals or 5= Per Pending, a Component Class/Component Rate Type of 1=First Class/R= Regular (US/MEX/CAN), 3= Std Mail/R= Regular (US/MEX/CAN), or 3= Std Mail/N= Nonprofit will be rejected since the .mpa USPS Publication Number and .mpa Permit Number are both blank. The value provided was {1}.Populate either the .mpa USPS Publication Number field or the .mpa Permit Number field. · .seg Multiple fieldsAction: Populate either the .mpa USPS Publication Number field or the .mpa Permit Number field.Error location: .seg Multiple fields1048The seg. Class Defining Preparation field value provided was {1}; it must contain 1 = First Class, 2 = Periodicals, 3 = Std Mail, or 4 = Pkg Services.Populated the .seg Class Defining Preparation field with 1, 2, 3, or 4. · .segAction: Populated the .seg Class Defining Preparation field with 1, 2, 3, or 4.Error location: .seg1053Required Field Missing: Job ID is a required field in the .par file..parError location: .par1054Required Field Missing: Segment ID is a required field in the .par file.Populate the .par Segment ID field. · .parAction: Populate the .par Segment ID field.Error location: .par1055Required Field Missing: Mail Piece Unit ID is a required field in the .par file.Populate the .par Mail Piece Unit ID field. · .parAction: Populate the .par Mail Piece Unit ID field.Error location: .par1056Required Field Missing: Component ID is a required field in the .par file.Populate the .par Component ID field. · .parAction: Populate the .par Component ID field.Error location: .par1057Required Field Missing: Sequence Number is a required field in the .par file.Populate the .par Sequence Number field. · .parAction: Populate the .par Sequence Number field.Error location: .par1058Required Field Missing: Sequence Number is a required field in the .par file.Populate the .par Data field. · .parAction: Populate the .par Data field.Error location: .par1059Required Field Missing: Adjustment Type is a required field in the .par file.Populate the .par Adjustment Type field. · .parAction: Populate the .par Adjustment Type field.Error location: .par1060Required Field Missing: Adjustment Amount is a required field in the .par file.Populate the .par Adjustment Amount field. · .parAction: Populate the .par Adjustment Amount field.Error location: .par1061Required Field Missing: Credit/Debit Indicatory is a required field in the .par file.Populate the .par Credit/Debit Indicator field. · .parAction: Populate the .par Credit/Debit Indicator field.Error location: .par1063Required Field Missing: MPA – Unique Sequence / Grouping ID is a required field in the .par file.Populate the .par MPA – Unique Sequence / Grouping ID field. · .parAction: Populate the .par MPA – Unique Sequence / Grouping ID field.Error location: .par1064Required Field Missing: PAR Record Status is a required field in the .par file.Populate the .par PAR Record Status field. · .parAction: Populate the .par PAR Record Status field.Error location: .par1065Required Field Missing: Closing Character is a required field in the .par file.Populate the .par Closing Character field. · .parAction: Populate the .par Closing Character field.Error location: .par1066Alphanumeric Data Type Error: Job ID must be an alphanumeric value in the .par file.Populate the .par Job ID field with an alphanumeric value. · .parAction: Populate the .par Job ID field with an alphanumeric value.Error location: .par1067Alphanumeric Data Type Error: Segment ID must be an alphanumeric value in the .par file.Populate the .par Segment ID field with an alphanumeric value. · .parAction: Populate the .par Segment ID field with an alphanumeric value.Error location: .par1068Alphanumeric Data Type Error: Mail Piece Unit ID must be an alphanumeric value in the .par file.Populate the .par Mail Piece Unit ID field with an alphanumeric value. · .parAction: Populate the .par Mail Piece Unit ID field with an alphanumeric value.Error location: .par1069Alphanumeric Data Type Error: Component ID must be an alphanumeric value in the .par file.Populate the .par Component ID field with an alphanumeric value. · .parAction: Populate the .par Component ID field with an alphanumeric value.Error location: .par1070Alphanumeric Data Type Error: User Comments must be an alphanumeric value in the .par file (when populated).Populate the .par User Comments field with an alphanumeric value when populated. · .parAction: Populate the .par User Comments field with an alphanumeric value when populated.Error location: .par1071Alphanumeric Data Type Error: MPA – Unique Sequence / Grouping ID must be an alphanumeric value in the .par file.Populate the .par MPA – Unique Sequence / Grouping ID field with an alphanumeric value. · .parAction: Populate the .par MPA – Unique Sequence / Grouping ID field with an alphanumeric value.Error location: .par1072Alphanumeric Data Type Error: Reserve must be an alphanumeric value in the .par file (when populated).Populate the .par Reserve field with an alphanumeric value when populated. · .parAction: Populate the .par Reserve field with an alphanumeric value when populated.Error location: .par1075Alphanumeric Data Type Error: User Option must be an alphanumeric value in the .par file (when populated).Populate the .par User Option Field with an alphanumeric value when populated. · .parAction: Populate the .par User Option Field with an alphanumeric value when populated.Error location: .par1079Numeric Data Type Error: Sequence Number must be a numeric value in the .par file.Populate the .par Sequence Number field with a numeric value. · .parAction: Populate the .par Sequence Number field with a numeric value.Error location: .par1080Numeric Data Type Error: Adjustment Amount must be a numeric value in the .par file (when populated).Populate the .par Adjustment Amount field with a numeric value. · .parAction: Populate the .par Adjustment Amount field with a numeric value.Error location: .par1081Numeric Data Type Error: Total Piece Affected must be a numeric value in the .par file (when populated).Populate the .par Total Pieces Affected field with a numeric value. · .parAction: Populate the .par Total Pieces Affected field with a numeric value.Error location: .par1082Numeric Data Type Error: MPA- Unique Sequence / Grouping ID must be zero-padded if numeric.Populate the .par MPA – Unique Sequence / Grouping ID field with a numeric value. · .parAction: Populate the .par MPA – Unique Sequence / Grouping ID field with a numeric value.Error location: .par1084Date Data Type Error: Date must be a valid numeric value formatted as YYYYMMDD in the .par file.Populate the .par Date field with a numeric value formatted as YYYYMMDD. · .parAction: Populate the .par Date field with a numeric value formatted as YYYYMMDD.Error location: .par1085The Adjustment Type field value provided was {1}; it must contain 03 = Spoilage or 04= Shortage.Populate the .par Adjustment Type field with 03 or 04. · .parAction: Populate the .par Adjustment Type field with 03 or 04.Error location: .par1087The Credit/Debit Indicator field provided value was {1}; it must contain C = Credit or D = Debit.Populate the .par Credit/Debit Indicator field with C or D. · .parAction: Populate the .par Credit/Debit Indicator field with C or D.Error location: .par1088The Adjustment Status field provided value was {1}; it must contain R= Ready To Pay.Populate the .par Adjustment Status field with R. · .parAction: Populate the .par Adjustment Status field with R.Error location: .par1089The PAR Record Status field value provided was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .par PAR Record Status field with O = Original, D = Delete, I = Insert, or U = Update. · .parAction: Populate the .par PAR Record Status field with O = Original, D = Delete, I = Insert, or U = Update.Error location: .par1090The Closing Character field value provided was {1}; it must contain #.Populate the .par Closing Character field with #. · .parAction: Populate the .par Closing Character field with #.Error location: .par1099There can be no characters after the Closing Character.Remove all characters after the .par Closing Character. · .parAction: Remove all characters after the .par Closing Character.Error location: .par1103Each .par file must have an associated .mpa Postage Payment Method field set to P = Permit or G = Gov’t – Fed (use Permit).Include an .mpa record with a Postage Payment Method field with a value of P or G for each .par file. · Multiple filesAction: Include an .mpa record with a Postage Payment Method field with a value of P or G for each .par file.Error location: Multiple files1107The Adjustment Amount cannot be a zero dollar amount in the .par file.Populate the .par Adjustment Amount field with a value that is greater than zero dollars. · .parAction: Populate the .par Adjustment Amount field with a value that is greater than zero dollars.Error location: .par1111Required Field Missing: Job ID is a required field in the .cqt file and must be a unique value.Populate the .cqt Job ID field. · .cqtAction: Populate the .cqt Job ID field.Error location: .cqt1112Required Field Missing: CQT Database ID is a required field in the .cqt file.Populate the .cqt CQT Database ID field. · .cqtAction: Populate the .cqt CQT Database ID field.Error location: .cqt1113Required Field Missing: Container ID is a required field in the .cqt file.Populate the .cqt Container ID field. · .cqtAction: Populate the .cqt Container ID field.Error location: .cqt1114The value provided was {1}; the .cqt Zone field must contain V = ADC, 1 = Zone 1, 2 = Zone 2, 3 = Zone 3, 4 = Zone 4, 5 = Zone 5, 6 = Zone 6, 7 = Zone 7, 8 = Zone 8, 9 = Zone 9, W = Reserved, S = SCF, D = DDU, or N = Not Zoned.Populate .cqt Zone field with a valid value. · .cqtAction: Populate .cqt Zone field with a valid value.Error location: .cqt1115Required Field Missing: Destination Entry is a required field in the .cqt file.Populate the .cqt Destination Entry field. · .cqtAction: Populate the .cqt Destination Entry field.Error location: .cqt1116Required Field Missing: Rate Category is a required field in the .cqt file.Populate the .cqt Rate Category field. · .cqtAction: Populate the .cqt Rate Category field.Error location: .cqt1117The .cqt Barcode Discount or Surcharge filed must be populated with either B = Pays base rate (no surcharge or discount), D = Barcode discount (deducted from the base rate), S = Non-Barcode Surcharge (added to the base rate), I = Non-Barcoded DNDC-entered.Populate the .cqt Barcode Discount or Surcharge field. · .cqtAction: Populate the .cqt Barcode Discount or Surcharge field.Error location: .cqt1118The .cqt Periodical: Sub / Non-Sub / Requestor Indicator field must be populated with either S = Sub, N = Non, R = Requestor or O = Other. The value provided was {1}.Populate the .cqt Periodicals: Sub/Non-Sub/Requestor Indicator field. · .cqtAction: Populate the .cqt Periodicals: Sub/Non-Sub/Requestor Indicator field.Error location: .cqt1119The .cqt Periodicals Co-Palletization Discount Indicator field must be populated with either Y = Yes, or N = No. The value provided was {1}.Populate the .cqt Periodicals Co-Palletization Discount Indicator field. · .cqtAction: Populate the .cqt Periodicals Co-Palletization Discount Indicator field.Error location: .cqt1120Number of Copies is a required field in the .cqt file.Populate the .cqt Number of Copies field. · .cqtAction: Populate the .cqt Number of Copies field.Error location: .cqt1121Required Field Missing: Number of Pieces is a required field in the .cqt file.Populate the .cqt Number of Pieces field. · .cqtAction: Populate the .cqt Number of Pieces field.Error location: .cqt1123The .cqt Record Status field must be populated with either O=Original, D=Delete, I=Insert or U= Update. The value provided was {1}.Populate the .cqt Record Status field. · .cqtAction: Populate the .cqt Record Status field.Error location: .cqt1124Required Field Missing: Closing Character is a required field in the .cqt file.Populate the .cqt Closing Character field. · .cqtAction: Populate the .cqt Closing Character field.Error location: .cqt1125Alphanumeric Data Type Error: Job ID must be an alphanumeric value in the .cqt file.Populate the .cqt Job ID field with an alphanumeric value. · .cqtAction: Populate the .cqt Job ID field with an alphanumeric value.Error location: .cqt1126Alphanumeric Data Type Error: 3 Digit/5 Digit Container Division must be an alphanumeric value in the .cqt file.Populate the .cqt 3 Digit/5 Digit Container Division field with an alphanumeric value. · .cqtAction: Populate the .cqt 3 Digit/5 Digit Container Division field with an alphanumeric value.Error location: .cqt1127The .cqt Mail Piece Unit ID field must be populated with an alphanumeric value.Populate the .cqt Mail Piece Unit ID field with an alphanumeric value. · .cqtAction: Populate the .cqt Mail Piece Unit ID field with an alphanumeric value.Error location: .cqt1128Alphanumeric Data Type Error: Reserve must be an alphanumeric value in the .cqt file.Populate the .cqt Reserve field with an alphanumeric value. · .cqtAction: Populate the .cqt Reserve field with an alphanumeric value.Error location: .cqt1129Numeric Data Type Error: CQT Database ID must be a numeric value in the .cqt file.Populate the .cqt CQT Database ID field with a numeric value. · .cqtAction: Populate the .cqt CQT Database ID field with a numeric value.Error location: .cqt1130Numeric Data Type Error: Container ID must be a numeric value in the .cqt file.Populate the .cqt Container ID field with a numeric value. · .cqtAction: Populate the .cqt Container ID field with a numeric value.Error location: .cqt1131Numeric Data Type Error: Number of Copies must be a numeric value in the .cqt file.Populate the .cqt Number of Copies field with a numeric value. · .cqtAction: Populate the .cqt Number of Copies field with a numeric value.Error location: .cqt1132Numeric Data Type Error: Number of Pieces must be a numeric value in the .cqt file.Populate the .cqt Number of Pieces field with a numeric value. · .cqtAction: Populate the .cqt Number of Pieces field with a numeric value.Error location: .cqt1135The .cqt Container Charge Allocation field must be populated with a numeric value.Populate the .cqt Container Charge Allocation field with a numeric value. · .cqtAction: Populate the .cqt Container Charge Allocation field with a numeric value.Error location: .cqt1136The .cqt ZAP Agent Code must be populated with a numeric value.Populate the .cqt ZAP Agent Code field with a numeric value. · .cqtAction: Populate the .cqt ZAP Agent Code field with a numeric value.Error location: .cqt1142The .cqt Barcode Discount or Surcharge Indicator field value provided was {1}; it must contain O = Other, if not a parcel B = Pays base rate (no surcharge or discount) D = Barcode discount (deducted from the base rate) S = Non-Barcode Surcharge (added to the base rate) or I = Non-Barcoded DNDC-entered parcel.Populate the .cqt Barcode Discount or Surcharge Indicator field with O, B, D, S, or I. · .cqtAction: Populate the .cqt Barcode Discount or Surcharge Indicator field with O, B, D, S, or I.Error location: .cqt1146The .cqt CQT Record Status field value provided was {1}; it must contain O = Original, D = Delete or U = Update.Populate the .cqt CQT Record Status field with O, D, or U. · .cqtAction: Populate the .cqt CQT Record Status field with O, D, or U.Error location: .cqt1147The .cqt Closing Character value provided was {1}; it must contain #.Populate the .cqt Closing Character field with #. · .cqtAction: Populate the .cqt Closing Character field with #.Error location: .cqt1148The .cqt Zone field value provided was {1}; it must contain D = DDU, S = SCF, V = ADC, or N = Not Zoned when the .cqt Periodicals Not County/In County Periodicals is populated with N = Not County.Populate the .cqt Zone field with D, S, V, or N when the .cqt Periodicals Not County/In County Periodicals is populated with N. · .cqt Multiple fieldsAction: Populate the .cqt Zone field with D, S, V, or N when the .cqt Periodicals Not County/In County Periodicals is populated with N.Error location: .cqt Multiple fields1149The .cqt Zone field value provided was {1}; it must contain D = DDU, S = SCF, N = Not Zoned, V = ADC, 1 = Zone 1, 2 = Zone 2, 3 = Zone 3, 4 = Zone 4, 5 = Zone 5, 6 = Zone 6, 7 = Zone 7, 8 = Zone 8, or 9 = Zone 9 when the .cqt Periodicals Not County/In County Periodicals is populated with I = In County Periodicals.Populate the .cqt Zone field with D, S, N, V, 1, 2, 3, 4, 5, 6, 7, 8, or 9 when the .cqt Periodicals Not County/In County Periodicals is populated with I. · .cqt Multiple fieldsAction: Populate the .cqt Zone field with D, S, N, V, 1, 2, 3, 4, 5, 6, 7, 8, or 9 when the .cqt Periodicals Not County/In County Periodicals is populated with I.Error location: .cqt Multiple fields1150The .cqt Zone value provided was {1}; it must contain N = Not when the .mpu Mail Piece Unit - Rate Type field is populated with B = Bound Printed Matter.Populate the .cqt Zone field with N when the .mpu Mail Piece Unit - Rate Type field is populated with B. · Multiple FilesAction: Populate the .cqt Zone field with N when the .mpu Mail Piece Unit - Rate Type field is populated with B.Error location: Multiple Files1151The .cqt Zone field provided was {1}; it must contain N = Not Zoned when .mpu Mail Piece Unit – Class field is populated with 1 = First Class and the .mpu Mail Piece Unit – Processing Category is not populated with PF = Parcel, First Class, MP = Machinable Parcel, or IR = Nonstandard Parcel.Populate the .cqt Zone field with N. · .cqt Multiple fieldsAction: Populate the .cqt Zone field with N.Error location: .cqt Multiple fields1152The .cqt Zone field provided was {1}; it must contain N = Not Zoned when the .mpu Mail Piece Unit – Rate field is populated with F = Media or L = Library.Populate the .cqt Zone field with N when .mpu Mail Piece Unit – Rate field is populated with F or L. · .cqt Multiple fieldsAction: Populate the .cqt Zone field with N when .mpu Mail Piece Unit – Rate field is populated with F or L.Error location: .cqt Multiple fields1153Populate the .cqt Zone field with N = Not Zoned when .mpu Mail Piece Unit – Class field is populated with 3 = Std Mail.Populate the .cqt Zone field with N when the .mpu Mail Piece Unit – Rate Type field is populated with 3. · .cqt Multiple fieldsAction: Populate the .cqt Zone field with N when the .mpu Mail Piece Unit – Rate Type field is populated with 3.Error location: .cqt Multiple fields1158The .cqt Rate Category field provided was {1}; it must contain S = Single Piece, N = Presort (1c, 4c), D = Carrier Route, FF = Reserved, FN = Reserved, FG = Reserved, or FH = Reserved when the .mpu Mail Piece Unit – Rate Type field is populated with B = Bound Printed Matter.Populate the .cqt Rate Category field with S, N, D, FF FN, FG, or FH when .mpu Mail Piece Unit – Rate Type field is populated with B.Action: Populate the .cqt Rate Category field with S, N, D, FF FN, FG, or FH when .mpu Mail Piece Unit – Rate Type field is populated with B.1160The .cqt Rate Category field provided was {1}; it must contain S = Single Piece when the .mpu Mail Piece Unit – Rate Type field is populated with F = Media or L = Library.Populate the .cqt Rate Category field with S when .mpu Mail Piece Unit – Rate Type field is populated with F or L. · .cqt Multiple fieldsAction: Populate the .cqt Rate Category field with S when .mpu Mail Piece Unit – Rate Type field is populated with F or L.Error location: .cqt Multiple fields1163Populate the .cqt Rate Category field with N = Presort (1c, 4c) when .mpu Mail Piece Unit – Class field is populated with 3= Std Mail and the .mpu Mail Piece Unit – Processing Category filed is populated with CM= Custom Mail.Populate the .cqt Rate Category field with N when .mpu Mail Piece Unit – Class field is populated with 3 and the .mpu Mail Piece Unit – Processing Category is field is populated with CM. · .cqt Multiple fieldsAction: Populate the .cqt Rate Category field with N when .mpu Mail Piece Unit – Class field is populated with 3 and the .mpu Mail Piece Unit – Processing Category is field is populated with CM.Error location: .cqt Multiple fields1164Populate the .cqt Rate Category field with A = Saturation-ECR, A1 = Non Automation - ECR, B = High Density-ECR, C = High Density Plus - ECR, C1 = Nonautomation High Density Plus - ECR, D = Carrier Route, E = 5 Digit Barcode, G = 5 Digit, H = 3 Digit Barcode, K = 3 Digit, L2 = MxAADC/Mixed BC, L6 = MxADC/Mixed, S = Single Piece, FF = Reserved, FG = Reserved, FH = Reserved, FI = Reserved, FJ = Reserved, or FN = Reserved when .mpu Mail Piece Unit - Class field is populated with 3 = Std Mail and the .mpu Mail Piece Unit Processing Category field is populated with FL = Flats.Populate the .cqt Rate Category field with A, A1, B, C, C1, D, E, G, H, K, L2, L6, S, FF, FG, FH, FI, FJ, or FN when the .mpu Mail Piece Unit Class field is populated with 3 and the .mpu Mail Piece Unit - Processing Category field is populated with FL = Flats. · .cqt Multiple fieldsAction: Populate the .cqt Rate Category field with A, A1, B, C, C1, D, E, G, H, K, L2, L6, S, FF, FG, FH, FI, FJ, or FN when the .mpu Mail Piece Unit Class field is populated with 3 and the .mpu Mail Piece Unit - Processing Category field is populated with FL = Flats.Error location: .cqt Multiple fields1165Populate the .cqt Rate Category field with A = Saturation-ECR, B = High Density-ECR, D = Carrier Route, E = 5 Digit Barcode, G = 5 Digit, H = 3 Digit Barcode, K = 3 Digit, L = Basic Barcode, N = Presort (1c, 4c), L2 = MxAADC/Mixed BC, L4 = MxADC BC, L6 = MxADC/Mixed or FB = Firm Bundle (Not In-County), FF = Reserved, or FN = Reserved when the .seg Full-Service Participation Indicator field is blank and the .mpu Mail Piece Unit - Class field is populated with 2 = Periodicals.Populate the .cqt Rate Category field with A, B, D, E, G, H, K, L, N, L2, L4, L6, FB, FF or FN for when the .seg Full-Service Participation Indicator field is blank and the .mpu Mail Piece Unit - Class field is populated with 2. · .cqtAction: Populate the .cqt Rate Category field with A, B, D, E, G, H, K, L, N, L2, L4, L6, FB, FF or FN for when the .seg Full-Service Participation Indicator field is blank and the .mpu Mail Piece Unit - Class field is populated with 2.Error location: .cqt1169There can be no characters after the Closing Character.Remove all characters after the .cqt Closing Character field. · .cqtAction: Remove all characters after the .cqt Closing Character field.Error location: .cqt1170A tray based copal consolidator cannot be deleted.Do not attempt to delete a tray based copal consolidator. · .ociAction: Do not attempt to delete a tray based copal consolidator.Error location: .oci2204Required Field Missing: 3 Digit/5 Digit Container Division is a required field in the .cqt file.Populate the .cqt 3 Digit/5 Digit Container Division field. · .cqtAction: Populate the .cqt 3 Digit/5 Digit Container Division field.Error location: .cqt2205Required Field Missing: Mail Piece Unit ID is a required field in the .cqt file.Populate the .cqt Mail Piece Unit ID field. · .cqtAction: Populate the .cqt Mail Piece Unit ID field.Error location: .cqt2206Numeric Data Type Error: Mail Piece Unit ID must be zero-padded if numeric.Populate the .cqt Mail Piece Unit ID field with a value that is zero-padded when numeric. · .cqtAction: Populate the .cqt Mail Piece Unit ID field with a value that is zero-padded when numeric.Error location: .cqt2208The .cqt Destination Entry field value provided was {1}; it must contain S = DSCF, H = DHUB, D = DDU, N = None, A = DADC, or P = Reserved.Populate the .cqt Destination Entry field with S, H, D, N, A, or P. · .cqtAction: Populate the .cqt Destination Entry field with S, H, D, N, A, or P.Error location: .cqt2209The .cqt Rate Category field value provided was {1}; it must contain A = Saturation - ECR, A1 = Non Automation Saturation - ECR, B = High Density - ECR, B1 = Non Automation High Density - ECR, C = High Density Plus - ECR, C1 = Nonautomation High Density Plus - ECR, D = Carrier Route, D1 = Non Automation Basic - Carrier Route, E = 5 Digit Barcode, FB = Firm Bundle, G = 5 Digit, H = 3 Digit Barcode, K = 3 Digit, L = Basic Barcode, N = Presort, PM = SCF, PO = Plus One, P7 = NDC, P8 = Mixed NDC, L2 = MxAADC/Mixed BC, L6 = MxADC/Mixed, L7 = AADC/3 Digit Machinable, L8 = MxAADC/Mixed Machinable, S = Single Piece, SD = Single-Piece (Does not meet content standards), or X = Other.Populate the .cqt Rate Category field with A, A1, B, B1, C, C1, D, D1, E, FB, G, H, K, L, N, PO, S, PM, P7, P8, L2, L6, L7, L8, SD, X · .cqtAction: Populate the .cqt Rate Category field with A, A1, B, B1, C, C1, D, D1, E, FB, G, H, K, L, N, PO, S, PM, P7, P8, L2, L6, L7, L8, SD, XError location: .cqt2211The .cqt Service Level Indicator field contains an invalid value; it must contain F = Full Service, B = Basic, or O = Other.Populate the .cqt Service Level Indicator field with F, B, or O. · .cqtAction: Populate the .cqt Service Level Indicator field with F, B, or O.Error location: .cqt2302Alphanumeric Data Type Error: Contact Name must be an alphanumeric value in the .hdr file.The .hdr Job ID field must be populated with a value that is zero-padded if populated with a numeric value. · .hdrAction: The .hdr Job ID field must be populated with a value that is zero-padded if populated with a numeric value.Error location: .hdr2303Required Field Missing: Container Summary Record Count is a required field in the .hdr file.Populate the .hdr Container Summary Record Count field. · .hdrAction: Populate the .hdr Container Summary Record Count field.Error location: .hdr2304Required Field Missing: Container Summary File Status is a required field in the .hdr file.Populate the .hdr Container Summary File Status field. · .hdrAction: Populate the .hdr Container Summary File Status field.Error location: .hdr2305Required Field Missing: Mail.dat Software Version is a required field in the .hdr file.Populate the .hdr Mail.dat Software Version field. · .hdrAction: Populate the .hdr Mail.dat Software Version field.Error location: .hdr2306Required Field Missing: Mail.dat Software Vendor’s Email is a required field in the .hdr file.Populate the .hdr Mail.dat Software Vendor’s Email field. · .hdrAction: Populate the .hdr Mail.dat Software Vendor’s Email field.Error location: .hdr2307Required Field Missing: Original Container Identification File Status is a required field in the .hdr file.Populate the .hdr Original Container Identification field. · .hdrAction: Populate the .hdr Original Container Identification field.Error location: .hdr2308Alphanumeric Data Type Error: Original Software Version must be an alphanumeric value in the .hdr file.Populate the .hdr Original Software Version field with an alphanumeric value. · .hdrAction: Populate the .hdr Original Software Version field with an alphanumeric value.Error location: .hdr2401Alphanumeric Data Type Error: Job ID must be an alphanumeric value in the .seg file.Populate the .seg Job ID field with an alphanumeric value. · .segAction: Populate the .seg Job ID field with an alphanumeric value.Error location: .seg2403Required Field Missing: Class Defining Preparation is a required field in the .seg file.Populate the .seg Class Defining Preparation field. · .segAction: Populate the .seg Class Defining Preparation field.Error location: .seg2404Alphanumeric Data Type Error: The .seg Class Defining Preparation must be populated with an alphanumeric value.Populate the .seg Class Defining Preparation field with an alphanumeric value. · .segAction: Populate the .seg Class Defining Preparation field with an alphanumeric value.Error location: .seg2405Required Field Missing: Principal Processing Category is a required field in the .seg file.Populate the .seg Principal Processing Category field. · .segAction: Populate the .seg Principal Processing Category field.Error location: .seg2406The .seg Package Services Packaging Criteria field value provided was {1}; it must contain PC = Piece PD = Pound or CB = Both.Populate the .seg Package Services Packaging Criteria field with PC, PD, or CB. · .segAction: Populate the .seg Package Services Packaging Criteria field with PC, PD, or CB.Error location: .seg2407Required Field Missing: Container and Bundle and Charge Method is a required field in the .seg file.Populate the .seg Container and Bundle Charge Method field. · .segAction: Populate the .seg Container and Bundle Charge Method field.Error location: .seg2604Numeric Data Type Error: Display Container ID must be zero-padded if numeric.Populate the .csm Display Container ID field with a value that is zero-padded if populated with a numeric value. · .csmAction: Populate the .csm Display Container ID field with a value that is zero-padded if populated with a numeric value.Error location: .csm2605Alphanumeric Data Type Error: The .csm Container Destination Zip field must be populated with an alphanumeric value.Populate the .csm Container Destination Zip field with an alphanumeric value. · .csmAction: Populate the .csm Container Destination Zip field with an alphanumeric value.Error location: .csm2606The value provided For The .csm Container Level field was {1}; it must contain A = CR-Direct, B = Mixed CR in 5 Digit, C = Mixed CR in 3 Digit, D = CR - 5D Scheme, G = 5 Digit (Auto/Presort), H = 5 Digit (Merged), I = 5 Digit (Presort Only), J = 5 Digit (Barcode only), M = 5D Scheme (Presort), N = 5D Scheme (Auto, Presort), P = 5D Scheme (Barcode), Q = 5D Scheme (Merged), R = 3 Digit (Auto, Presort), S = 3 Digit (Barcode), T = 3 Digit (Presort), U = 3 Digit (CR, Auto, Presort), V = 3 Digit Scheme, X = SCF, Y = Protected SCF, Z = ADC, AA = AADC, AB = Mixed ADC, AC = Mixed AADC, AD = ASF, AE = NDC, AF = Protected NDC, AG = Mixed NDC, AH = Origin MxADC, AI = Protected ADC, AJ = Single Piece, AK = MXDS Mixed Surface CSA FCM Only, AL = MXDA Mixed Air CSA FCM Only, AM = Working CSA FCM Only, AN = Single Piece CSA FCM Only, AO = Surface CSA FCM Only, AP = Air CSA FCM Only, AQ = Local CSA FCM Only.Populate the .csm Container Level field with A,B,C,D,G,H,I,J,M,N,P,Q,R,S,T,U,V,X, Y,Z,AA,AB,AC,AD,AE,AF,AG, AH,AI,AJ,AK,AL,AM,AN,AO,AP,AQ. · .csmAction: Populate the .csm Container Level field with A,B,C,D,G,H,I,J,M,N,P,Q,R,S,T,U,V,X, Y,Z,AA,AB,AC,AD,AE,AF,AG, AH,AI,AJ,AK,AL,AM,AN,AO,AP,AQ.Error location: .csm2608Alphanumeric Data Type Error: The .csm Entry Point – Actual / Delivery – Locale Key must be populated with an alphanumeric value.Populate the .csm Entry Point – Actual / Delivery – Locale Key field with an alphanumeric value. · .csmAction: Populate the .csm Entry Point – Actual / Delivery – Locale Key field with an alphanumeric value.Error location: .csm2609Required Field Missing: Entry Point – Actual / Delivery – Postal Code is a required field in the .csm file.Populate the .csm Entry Point – Actual / Delivery – Postal Code field. · .csmAction: Populate the .csm Entry Point – Actual / Delivery – Postal Code field.Error location: .csm2610Alphanumeric Data Type Error: The .csm Entry Point – Actual / Delivery – Postal Code must be populated with an alphanumeric value.Populate the .csm Entry Point – Actual / Delivery – Postal Code field with an alphanumeric value. · .csmAction: Populate the .csm Entry Point – Actual / Delivery – Postal Code field with an alphanumeric value.Error location: .csm2611Numeric Data Type Error: The .csm Parent Container Reference ID field must be populated with a numeric value.Populate the .csm Parent Container Reference ID field with a numeric value. · .csmAction: Populate the .csm Parent Container Reference ID field with a numeric value.Error location: .csm2615Required Field Missing: Total Weight (product only) is a required field in the .csm file, when the associated Container ID is not referenced in the .csm Supplemental Physical Container ID field of a Container ID, which has the .csm Total Weight (product only) field populated.Populate the .csm Total Weight (product only) field, when the associated Container ID is not referenced in the .csm Supplemental Physical Container ID field of a Container ID, which has the .csm Total Weight (product only) field populated. · .csmAction: Populate the .csm Total Weight (product only) field, when the associated Container ID is not referenced in the .csm Supplemental Physical Container ID field of a Container ID, which has the .csm Total Weight (product only) field populated.Error location: .csm2617The value provided for the .csm Container Status field was {1}; it must contain P = Preliminary postage statement, R = Ready to pay, X = Paid, C = Cancel, D = Delete, or T = Transportation Information Update (when populated).Populate the .csm Container Status field with P, R, X, C, D, or T when populated. · .csmAction: Populate the .csm Container Status field with P, R, X, C, D, or T when populated.Error location: .csm2618The value provided For The .csm Sibling Container Indicator field was {1}; it must contain Y = Yes or Blank = None.Populate the .csm Sibling Container Indicator field with Y or leave blank. · .csmAction: Populate the .csm Sibling Container Indicator field with Y or leave blank.Error location: .csm2619Numeric Data Type Error: Sibling Container Reference ID must be a numeric value in the .csm file.Populate the .csm Sibling Container Reference ID field with a numeric value. · .csmAction: Populate the .csm Sibling Container Reference ID field with a numeric value.Error location: .csm2622Alphanumeric Data Type Error: The .csm Transportation Carrier ID field must be populated with an alphanumeric value.Populate the .csm Transportation Carrier ID field with an alphanumeric value. · .csmAction: Populate the .csm Transportation Carrier ID field with an alphanumeric value.Error location: .csm2623Alphanumeric Data Type Error: The .csm Label: Destination Line 1 field must be populated with an alphanumeric value.Populate the .csm Label: Destination Line 1 field with an alphanumeric value. · .csmAction: Populate the .csm Label: Destination Line 1 field with an alphanumeric value.Error location: .csm2624Alphanumeric Data Type Error: The .csm Label: Destination Line 1 field must be populated with an alphanumeric value.Populate the .csm Label: Destination Line 2 field with an alphanumeric value. · .csmAction: Populate the .csm Label: Destination Line 2 field with an alphanumeric value.Error location: .csm2625Alphanumeric Data Type Error: The .csm Label: Contents – Line 1 field must be populated with an alphanumeric value.Populate the .csm Label: Contents – Line 1 field with an alphanumeric value. · .csmAction: Populate the .csm Label: Contents – Line 1 field with an alphanumeric value.Error location: .csm2626Alphanumeric Data Type Error: The .csm Label: Contents – Line 2 field must be populated with an alphanumeric value.Populate the .csm Label: Contents – Line 2 field with an alphanumeric value. · .csmAction: Populate the .csm Label: Contents – Line 2 field with an alphanumeric value.Error location: .csm2627Alphanumeric Data Type Error: The .csm Label: User Information Line 1 field must be populated with an alphanumeric value.Populate the .csm Label: User Information Line 1 field with an alphanumeric value. · .csmAction: Populate the .csm Label: User Information Line 1 field with an alphanumeric value.Error location: .csm2628Alphanumeric Data Type Error: The .csm Label: User Information Line 2 field must be populated with an alphanumeric value.Populate the .csm Label: User Information Line 2 field with an alphanumeric value. · .csmAction: Populate the .csm Label: User Information Line 2 field with an alphanumeric value.Error location: .csm2629Alphanumeric Data Type Error: IMTM Barcode Upper Serialization must be an alphanumeric value in the .csm file..csmError location: .csm2631Alphanumeric Data Type Error: Container Level Attempted must be an alphanumeric value in the .csm file..csmError location: .csm2632Numeric Data Type Error: The .csm CSA Separation ID field must be populated with an numeric value.Populate the .csm CSA Separation ID field with an numeric value. · .csmAction: Populate the .csm CSA Separation ID field with an numeric value.Error location: .csm2901Numeric Data Type Error: Job ID must be zero-padded if numeric.Populated the .mpu Job ID field with a value that is zero-padded. · .mpaAction: Populated the .mpu Job ID field with a value that is zero-padded.Error location: .mpa2902Numeric Data Type Error: Unique Sequence/Grouping ID must be zero-padded if numeric.Populate the .mpa MPA – Unique Sequence/Grouping ID field with a value that is zero-padded if populated with a numeric value. · .mpaAction: Populate the .mpa MPA – Unique Sequence/Grouping ID field with a value that is zero-padded if populated with a numeric value.Error location: .mpa2903Alphanumeric Data Type Error: The .mpa Customer Reference ID field must be populated with an alphanumeric value.Populate the .mpa Customer Reference ID field with an alphanumeric value. · .mpaAction: Populate the .mpa Customer Reference ID field with an alphanumeric value.Error location: .mpa2904Required Field Missing: Postage Payment Method is a required field in the .mpa file.Populate the .mpa Postage Payment Method field. · .mpaAction: Populate the .mpa Postage Payment Method field.Error location: .mpa2997Required Field Missing: Mail Piece Unit – Weight is a required field in the .mpu file.Populate the .mpu Mail Piece Unit – Weight field. · .mpuAction: Populate the .mpu Mail Piece Unit – Weight field.Error location: .mpu2998The .mpu Machinability Indicator must be populated with an alphanumeric value when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats. 2 = Periodicals 5 = Per Pending. The value provided was {1}.Populate the .mpu Machinability Indicator field with an alphanumeric value when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats. · .mpuAction: Populate the .mpu Machinability Indicator field with an alphanumeric value when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats.Error location: .mpu2999The .mpu Machinability Indicator field is required when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats. 2 = Periodicals 5 = Per Pending.Populate the .mpu Machinability Indicator field when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats. · .mpuAction: Populate the .mpu Machinability Indicator field when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats.Error location: .mpu3002The .cpt Component ID field must be populated with an alphanumeric value.Populate the .cpt Component ID field with an alphanumeric value. · .cptAction: Populate the .cpt Component ID field with an alphanumeric value.Error location: .cpt3004Required Field Missing: Component – Weight is a required field in the .cpt file.Populate the .cpt Component – Weight field. · .cptAction: Populate the .cpt Component – Weight field.Error location: .cpt3005Required Field Missing: Component – Weight: Status is a required field in the .cpt file.Populate the .cpt Component – Weight: Status field. · .cptAction: Populate the .cpt Component – Weight: Status field.Error location: .cpt3006Required Field Missing: Component – Periodical Ad Percentage: Status is a required field in the .cpt file.Populate the .cpt Component – Periodical Ad Percentage: Status field. · .cptAction: Populate the .cpt Component – Periodical Ad Percentage: Status field.Error location: .cpt3007The value provided for the Component – Periodical Ad Percentage: Status field was {1}; it must contain N = None Given, P = Pending, or F = Final.Populate the .cpt Component – Periodical Ad Percentage: Status field with N, P, or F. · .cptAction: Populate the .cpt Component – Periodical Ad Percentage: Status field with N, P, or F.Error location: .cpt3104Required Field Missing: Mail Piece Unit – Class is a required field in the .mpu file.Populate the .mpu Mail Piece Unit – Class field. · .mpuAction: Populate the .mpu Mail Piece Unit – Class field.Error location: .mpu3105Required Field Missing: Mail Piece Unit – Rate Type is a required field in the .mpu file.Populate the .mpu Mail Piece Unit – Rate Type field. · .mpuAction: Populate the .mpu Mail Piece Unit – Rate Type field.Error location: .mpu3106Required Field Missing: Mail Piece Unit – Processing Category is a required field in the .mpu file.Populate the .mpu Mail Piece Unit – Processing Category field. · .mpuAction: Populate the .mpu Mail Piece Unit – Processing Category field.Error location: .mpu3108The .mpu Five Digit Scheme Database Date field must be populated with a valid date formatted as YYYYMMDD (when populated).Populate the .mpu Five Digit Scheme Database Date field with a valid date formatted as YYYYMMDD (when populated). · .mpuAction: Populate the .mpu Five Digit Scheme Database Date field with a valid date formatted as YYYYMMDD (when populated).Error location: .mpu3304Required Field Missing: Piece ID is a required field and must be a unique value in the .pdr file.Populate the .pdr Piece ID field. · .pdrAction: Populate the .pdr Piece ID field.Error location: .pdr3305The .pdr Piece ID field must be populated with an alphanumeric value.Populate the .pdr Piece ID field with an alphanumeric value. · .pdrAction: Populate the .pdr Piece ID field with an alphanumeric value.Error location: .pdr3307The .pdr Line-Of-Travel Seq. Direction Code field value provided was {1}; it must contain A = Ascending or D = Descending.Populate the .pdr Line-Of-Travel Seq. Direction Code field with A or D. · .pdrAction: Populate the .pdr Line-Of-Travel Seq. Direction Code field with A or D.Error location: .pdr3506The .mpa Mail Owner’s Lcl Permit Ref Num / Int’l Bill Num – Type field value provided was {1}; it must contain S = Stamp M = Meter P = Permit G = Gov’t – Fed (using Permit) V = Virtual Reference Number or H = Government Meter.Populate the mpa Mail Owner’s Lcl Permit Ref Num / Int’l Bill Num – Type field with S, M, P, G, V, or H. · .mpaAction: Populate the mpa Mail Owner’s Lcl Permit Ref Num / Int’l Bill Num – Type field with S, M, P, G, V, or H.Error location: .mpa3510The .seg Package Services Packaging Criteria field value provided was {1}; it must contain PC = Piece PD = Pound or CB = Both.Populate the .seg Package Services Packaging Criteria field with PC, PD, or CB. · .segAction: Populate the .seg Package Services Packaging Criteria field with PC, PD, or CB.Error location: .seg3515When the .csm Sibling Container Indicator field is set to Y = Yes, only the following fields can be populated: (Required) Job ID, Segment ID, Container ID of the Sibling Container, Container Type, Sibling Container Indicator field, Sibling Container Reference ID and (Optional) Label: Destination Line 1, Label: Destination Line 2, Label: Content Line 1, Label: Content Line 2, Label: Entry (Origin) Point Line, Label: User Information Line 1, Label: User Information Line 2, Label: Container Label CIN Code, Truck or Dispatch Number, and Stop Designator, when the .csm Container Type is populated with AB = Air Box, the .csm Total Weight (product only) field can be populated.Populate the listed fields. · .csmAction: Populate the listed fields.Error location: .csm3520The value provided for the Component - Rate Type field was {1}; it must contain R, J, O, K, M, Z, I, D1, D2, D3, D4, D5, D6, D7, D8, D9, D0, E, E1, E2, E7, T, T1, T2, T3, T4, or T5 when the .cpt Component - Class field is with 1 = First Class.Populate the .cpt Component - Rate Type field with R, J, O, K, M, Z, I, D1, D2, D3, D4, D5, D6, D7, D8, D9, D0, E, E1, E2, E7, T, T1, T2, T3, T4, or T5 when the .cpt Component - Class field is populated with 1. · .cptAction: Populate the .cpt Component - Rate Type field with R, J, O, K, M, Z, I, D1, D2, D3, D4, D5, D6, D7, D8, D9, D0, E, E1, E2, E7, T, T1, T2, T3, T4, or T5 when the .cpt Component - Class field is populated with 1.Error location: .cpt3522The value provided for the Component – Rate Type field was {1}; it must contain R = Regular (US/MEX/CAN), N = Nonprofit, S = Science of Agriculture, C = Classroom, W = Science of Agriculture Limited Circulation, Y = Regular Limited Circulation, H = Per Ride-Along, Z – Included, part of host postage, or M = Repositionable Component when the .cpt Component – Class is populated with 2 = Periodicals.Populate the .cpt Component – Rate Type field with R, N, S, C, W, Y, H, Z, or M when the .cpt Component – Class is populated with 2. · .cptAction: Populate the .cpt Component – Rate Type field with R, N, S, C, W, Y, H, Z, or M when the .cpt Component – Class is populated with 2.Error location: .cpt3523The value provided for the Component – Rate Type field contains was {1}; it must contain R = Regular (US/MEX/CAN), N = Nonprofit, M = Repositionable Component, or T = Priority when the .cpt Component – Class field is populated with 3 = Std Mail.Populate the .cpt Component – Rate Type field with R, N, M, or T when the .cpt Component – Class field is populated with 3. · Error location: CptAction: Populate the .cpt Component – Rate Type field with R, N, M, or T when the .cpt Component – Class field is populated with 3.Error location: Cpt3524The value provided for the Component - Rate Type field was {1}; it must contain B, L, M, F, or D when the .cpt Component - Class field is populated with 4 = Pkg Services.Populate the .cpt Component - Rate Type field with B, L, M, F, or D when the .cpt Component - Class field is populated with 4. · .cptAction: Populate the .cpt Component - Rate Type field with B, L, M, F, or D when the .cpt Component - Class field is populated with 4.Error location: .cpt3525For .hdr File Processing, the .hdr MPU / C Record Count field must match the Record Count of the MPU / C Relationship file.Populate the .hdr MPU / C Record Count field with a value that is equal to the Record Count of the MPU / C Relationship file. · .mpuAction: Populate the .hdr MPU / C Record Count field with a value that is equal to the Record Count of the MPU / C Relationship file.Error location: .mpu3526For .hdr File Processing, the .hdr Mail Postage Account Record Count must match the Record Count of the Mailer Postage Account file.Populate the .hdr Postage Account Record Count field with a value that is equal to the Record Count of the Mailer Postage Account file. · .mpaAction: Populate the .hdr Postage Account Record Count field with a value that is equal to the Record Count of the Mailer Postage Account file.Error location: .mpa3527For .hdr File Processing, the .hdr Container Summary Record Count field must match the Record Count of the Container Summary file.Populate the .hdr Container Summary Record Count field with a value that is equal to the Record Count of the Container Summary file. · .csmAction: Populate the .hdr Container Summary Record Count field with a value that is equal to the Record Count of the Container Summary file.Error location: .csm3542For MLOCR mailings, the .seg Class Defining Preparation field value provided was {1}; it cannot contain 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .seg Class Defining Preparation field with a value other than 6 for MLOCR mailings. · .mpuAction: Populate the .seg Class Defining Preparation field with a value other than 6 for MLOCR mailings.Error location: .mpu3543For MLOCR mailings, the .mpu Mail Piece Unit – Processing Category field value provided was {1}; it must be CD = Cards, LT = Letters, or FL = Flats when the .mpu Mail Piece Unit – Class field is populate with 1 = First Class.Populate the .mpu Mail Piece Unit – Processing Category field with CD = Cards, LT = Letters, or FL = Flats when the .mpu Mail Piece Unit – Class field is populate with 1. · .mpuAction: Populate the .mpu Mail Piece Unit – Processing Category field with CD = Cards, LT = Letters, or FL = Flats when the .mpu Mail Piece Unit – Class field is populate with 1.Error location: .mpu3544For MLOCR mailings, the .cqt Rate Category field value provided was {1}; it must contain E = 5 Digit Barcode, H = 3 Digit Barcode, K = 3 Digit, L2 = MxAADC/Mixed BC, L6 = MxADC/Mixed, N = Presort (1C, 4C), or S = Single Piece when the .mpu Mail Piece Unit - Class field is populated with 1 = First Class and the .mpu Mail Piece Unit - Processing Category is populated with FL = Flats.Populate the .cqt Rate Category field with a value other than E, H, K, L2, L6, N, or S when the .mpu Mail Piece Unit - Class field is populated with 1 = First Class and the .mpu Mail Piece Unit - Processing Category is populated with FL = Flats. · .cqtAction: Populate the .cqt Rate Category field with a value other than E, H, K, L2, L6, N, or S when the .mpu Mail Piece Unit - Class field is populated with 1 = First Class and the .mpu Mail Piece Unit - Processing Category is populated with FL = Flats.Error location: .cqt3545For MLOCR mailings, the .mpu Mail Piece Unit – Processing Category field must be populated with LT = Letters or FL = Flats when the .mpu Mail Piece Unit – Class field is populated with 3 = Std Mail. The value provided was {1}.Populate the .mpu Mail Piece Unit – Processing Category field with LT or FL when the .mpu Mail Piece Unit – Class field is populated with 3. · .mpuAction: Populate the .mpu Mail Piece Unit – Processing Category field with LT or FL when the .mpu Mail Piece Unit – Class field is populated with 3.Error location: .mpu3546For MLOCR Mailings, the .mpu Mail Piece Unit - Weight must be less than or equal to 3.3 ounces when the .mpu Mail Piece Unit - Processing Category field is populated with LT = Letters or CD = Cards, the .mpa Postage Payment Method field is populated with L = Metered: Lowest, C = Metered: Correct, P = Permit, G = Gov't - Fed (use Permit), M = Metered: Neither, the .mpu Mail Piece Unit - Class field is populated with 1 = First Class, and the .cqt Rate Category field is populated with E = 5 Digit Barcode, H = 3 Digit Barcode, L2 = MxAADC/Mixed BC, N = Presort (1C, 4C), or S = Single Piece. The value provided was {1}.Populate the .mpu Mail Piece Unit - Weight field with a value that is less than or equal to 3.3 ounces when the .mpu Mail Piece Unit - Processing Category field is populated with LT = Letters or CD = Cards, the .mpa Postage Payment Method field is populated with L, C, P, G or M, the .mpu Mail Piece Unit - Class field is populated with 1, and the .cqt Rate Category field is populated with E, H, L2, N, or S. · .mpuAction: Populate the .mpu Mail Piece Unit - Weight field with a value that is less than or equal to 3.3 ounces when the .mpu Mail Piece Unit - Processing Category field is populated with LT = Letters or CD = Cards, the .mpa Postage Payment Method field is populated with L, C, P, G or M, the .mpu Mail Piece Unit - Class field is populated with 1, and the .cqt Rate Category field is populated with E, H, L2, N, or S.Error location: .mpu3547The value provided for the .csm Container Type field was {1}; It must contain O = 1’ Tray, T = 2’ Tray, E = EMM Tray, F = Flat Tub, L =Logical Tray (MLOCR), M = Logical Pallet (MLOCR), P = Pallet, G = EIRS 66 – General Purpose Mail Container w/Gate, D = EIRS 68 – Eastern Region Mail Container w/Web Door, R = EIRS 84 – Wire Container Rigid, C = EIRS 84C – Collapsible Wire Container, H = EIRS 61 – Hamper, Large Canvas, A = EIRS 61P – Hamper, Large Plastic or AB = Air Box for an MLOCR processing.Populate the .csm Container Type field with O, T, E, F, L, M, P, G, D, R C H, A, or AB for MLOCR processing. · .csmAction: Populate the .csm Container Type field with O, T, E, F, L, M, P, G, D, R C H, A, or AB for MLOCR processing.Error location: .csm3548For MLOCR Mailings, the .mpa Postage Payment Method field contains an invalid value; it must contain L, C, P, M, G or S when the .mpu Mail Piece Unit – Class field is populated with 3 and the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters. L = Metered: Lowest, C = Metered: Correct, P = Permit, M = Metered: Neither, G = Gov’t – Fed (use Permit), S = Stamp, 3 = Std Mail.Populate the .mpa Postage Payment Method field with L, C, P, M, G or S when the .mpu Mail Piece Unit – Class field is populated with 3 and the .mpu Mail Piece Unit – Processing Category field is populated with LT for MLOCR mailings. · .mpaAction: Populate the .mpa Postage Payment Method field with L, C, P, M, G or S when the .mpu Mail Piece Unit – Class field is populated with 3 and the .mpu Mail Piece Unit – Processing Category field is populated with LT for MLOCR mailings.Error location: .mpa3555Referential Integrity Error: The Container ID in the .cqt file does not have a corresponding parent Container ID in the .csm file.Populate the .cqt Container ID field with a value that exists in the .csm Container ID field. · Referential IntegrityAction: Populate the .cqt Container ID field with a value that exists in the .csm Container ID field.Error location: Referential Integrity3556Referential Integrity Error: The MPU ID in the .cqt file does not have a corresponding parent MPU ID in the .mpu file.Populate the .cqt Mail Piece Unit ID field with a value that exists in the .mpu Mail Piece Unit ID field. · Referential IntegrityAction: Populate the .cqt Mail Piece Unit ID field with a value that exists in the .mpu Mail Piece Unit ID field.Error location: Referential Integrity3557Referential Integrity Error: There cannot be duplicate primary keys in the .cqt file (CQT Database ID).Populate the .cqt CQT Database ID field with a unique value for each .cqt record. · Referential IntegrityAction: Populate the .cqt CQT Database ID field with a unique value for each .cqt record.Error location: Referential Integrity3558Referential Integrity Error: The Job ID in the .mpu file does not match the Job ID in the .hdr file.Populate the .mpu Job ID field with the same value that is populated in the .hdr Job ID field. · Referential IntegrityAction: Populate the .mpu Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Referential Integrity3559Referential Integrity Error: The Segment ID in the .mpu file does not have a corresponding parent Segment ID in the .seg file.Populate the .mpu Segment ID field with a value that exists in the .seg Segment ID field. · Referential IntegrityAction: Populate the .mpu Segment ID field with a value that exists in the .seg Segment ID field.Error location: Referential Integrity3560There cannot be duplicate primary keys in the .mpu file (Segment ID, MPU ID).Populate the .mpu Segment ID and .mpu Mail Piece Unit ID field with unique values for each .mpu record. · Referential IntegrityAction: Populate the .mpu Segment ID and .mpu Mail Piece Unit ID field with unique values for each .mpu record.Error location: Referential Integrity3561Referential Integrity Error: The Job ID in the .pqt file does not match the Job ID in the .hdr file.Populate the .pqt Job ID field with the same value that is populated in the .hdr Job ID field. · Referential IntegrityAction: Populate the .pqt Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Referential Integrity3562Referential Integrity Error: The CQT Database ID in the .pqt file does not have a corresponding parent CQT Database ID in the .cqt file.Populate the .pqt CQT Database ID field with a value that exists in the .cqt CQT Database ID field. · Referential IntegrityAction: Populate the .pqt CQT Database ID field with a value that exists in the .cqt CQT Database ID field.Error location: Referential Integrity3564The .pdr Job ID field does not match the .hdr Job ID field.Populate the .pdr Job ID field with the same value that is populated in the .hdr Job ID field. · Referential IntegrityAction: Populate the .pdr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Referential Integrity3567There cannot be duplicate primary keys in the .pdr file (Piece ID).Populate the .pdr Piece ID field with a unique value for each .pdr record. · Referential IntegrityAction: Populate the .pdr Piece ID field with a unique value for each .pdr record.Error location: Referential Integrity3568Referential Integrity Error: The Job ID in the .cpt file does not match the Job ID in the .hdr file.Populate the .cpt Job ID field with the same value that is populated in the .hdr Job ID field. · Referential IntegrityAction: Populate the .cpt Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Referential Integrity3569Referential Integrity Error: There cannot be duplicate primary keys in the .cpt file (Component ID).Populate the .cpt Component ID field with a unique value for each record. · Referential IntegrityAction: Populate the .cpt Component ID field with a unique value for each record.Error location: Referential Integrity3570Referential Integrity Error: The Job ID in the .mcr file does not match the Job ID in the .hdr file.Populate the .mcr Job ID field with the same value that is populated in the .hdr Job ID field. · Referential IntegrityAction: Populate the .mcr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Referential Integrity3571Referential Integrity Error: The Segment ID and MPU ID Composite Key in the .mcr file does not have a corresponding parent Segment ID and MPU ID in the .mpu file.Populate the .mcr Segment ID and .mcr Mail Piece Unit ID field with a value that exists in the .mpu file. · Referential IntegrityAction: Populate the .mcr Segment ID and .mcr Mail Piece Unit ID field with a value that exists in the .mpu file.Error location: Referential Integrity3573Referential Integrity Error: There must be a corresponding .mcr and .cpt record for each unique Component IDPopulate both the .mcr file and .cpt file with records relating to each unique Component ID · Referential IntegrityAction: Populate both the .mcr file and .cpt file with records relating to each unique Component IDError location: Referential Integrity3574Referential Integrity Error: The Primary MPA ID in the .mcr file does not have a corresponding parent MPA ID in the .mpa file.Populate the .mcr Primary MPA ID field with a value that exists in the .mpa MPA ID file. · Referential IntegrityAction: Populate the .mcr Primary MPA ID field with a value that exists in the .mpa MPA ID file.Error location: Referential Integrity3575Referential Integrity Error: The Additional Postage MPA ID in the .mcr file does not have a corresponding parent MPA ID in the .mpa file.Populate the .mcr Additional Postage MPA ID field with a value that exists in the .mpa MPA ID file. · Referential IntegrityAction: Populate the .mcr Additional Postage MPA ID field with a value that exists in the .mpa MPA ID file.Error location: Referential Integrity3576Referential Integrity Error: There cannot be duplicate primary keys in the .mcr file (Segment ID, MPU ID, Component ID).Populate the .mcr Segment ID, Mail Piece Unit ID, and Component ID fields with unique values for each .mcr record. · Referential IntegrityAction: Populate the .mcr Segment ID, Mail Piece Unit ID, and Component ID fields with unique values for each .mcr record.Error location: Referential Integrity3577The .par file Job ID of the current line does not equal the .hdr file Job ID.Populate the .par Job ID field with the same value that is populated in the .hdr Job ID field. · Multiple FilesAction: Populate the .par Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Multiple Files3581Referential Integrity Error: There cannot be duplicate primary keys in the .par file (Segment ID, MPU ID, Component ID, Sequence Number).Populate the .par Segment ID, Mail Piece Unit ID, Component ID, and Sequence Number fields with unique values for each .par record. · Referential IntegrityAction: Populate the .par Segment ID, Mail Piece Unit ID, Component ID, and Sequence Number fields with unique values for each .par record.Error location: Referential Integrity3582Referential Integrity Error: The Job ID in the .mpa file does not match the Job ID in the .hdr file.Populate the .mpa Job ID field with the same value that is populated in the .hdr Job ID field. · Referential IntegrityAction: Populate the .mpa Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Referential Integrity3583There cannot be duplicate primary keys in the .mpa file (MPA – Unique Sequence/Grouping ID).Populate the .mpa MPA – Unique Sequence/Grouping ID field with a unique value for each .mpa record. · Referential IntegrityAction: Populate the .mpa MPA – Unique Sequence/Grouping ID field with a unique value for each .mpa record.Error location: Referential Integrity3594The value provided for the .csm Sibling Container Indicator field was {1}; it must be blank when the .csm Container Status field is populated with R = Ready to pay and the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals.Verify that the .csm Sibling Container Indicator field is not populated when the .csm Container Status field is populated with R and the .mpu Mail Piece Unit – Class field is populated with 2. · .csmAction: Verify that the .csm Sibling Container Indicator field is not populated when the .csm Container Status field is populated with R and the .mpu Mail Piece Unit – Class field is populated with 2.Error location: .csm3595For MLOCR Mailings, there must be at least one .csm Container Type field value of M = Logical Pallet or L = Logical Tray when the .seg Logical/Physical Container Indicator field is populated with L = Logical Container.Populate the .csm Container Type field with M or L when the .seg Logical/Physical Container field is populated with L for MLOCR mailings. · .csmAction: Populate the .csm Container Type field with M or L when the .seg Logical/Physical Container field is populated with L for MLOCR mailings.Error location: .csm3598Referential Integrity Error: The Segment ID in the .csm file does not have a corresponding parent Segment ID in the .seg file.Populate the .csm Segment ID field with a value that matches the .seg Segment ID field. · Referential IntegrityAction: Populate the .csm Segment ID field with a value that matches the .seg Segment ID field.Error location: Referential Integrity3599There cannot be duplicate primary keys in the .csm file (Segment ID, Container ID).Populate the .csm Container ID and .csm Segment ID fields with a unique value for each .csm record. · Referential IntegrityAction: Populate the .csm Container ID and .csm Segment ID fields with a unique value for each .csm record.Error location: Referential Integrity3600Referential Integrity Error: The Job ID in the .cqt file does not match the Job ID in the .hdr file.Populate the .cqt Job ID field with a value that matches the .hdr Job ID field. · Referential IntegrityAction: Populate the .cqt Job ID field with a value that matches the .hdr Job ID field.Error location: Referential Integrity3601Referential Integrity Error: The Job ID in the .seg file does not match the Job ID in the .hdr file.Populate the .seg Job ID field with the same value that is populated win the .hdr Job ID field. · Referential IntegrityAction: Populate the .seg Job ID field with the same value that is populated win the .hdr Job ID field.Error location: Referential Integrity3602There cannot be duplicate primary keys in the .seg file (Segment ID).Populate the .seg Segment ID field with a unique value for each record. · Referential IntegrityAction: Populate the .seg Segment ID field with a unique value for each record.Error location: Referential Integrity3603Referential Integrity Error: The Job ID in the .csm file does not match the Job ID in the .hdr file.Populate the .csm Job ID field with the same value that is populated in the .hdr Job ID field. · Referential IntegrityAction: Populate the .csm Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Referential Integrity3604Referential Integrity Error: The Total Number of Copies from all .csm child handling unit records must equal the .csm parent record’s Number of Copies.Populate the .csm Number of Copies for the parent container with a value that is equal to the total Number of Copies from all child handling units. · Referential IntegrityAction: Populate the .csm Number of Copies for the parent container with a value that is equal to the total Number of Copies from all child handling units.Error location: Referential Integrity3605Referential Integrity Error: The Total Number of Pieces from all .csm child handling unit records must equal the .csm parent record’s Number of Pieces.Populate the .csm Number of Pieces for the parent container with a value that is equal to the total Number of Pieces from all child handling units. · Referential IntegrityAction: Populate the .csm Number of Pieces for the parent container with a value that is equal to the total Number of Pieces from all child handling units.Error location: Referential Integrity3606Referential Integrity Error: The .csm parent Container ID must match the child container’s Parent Container Reference ID.Populate the .csm Container ID of the parent container with a value that matches the .csm Parent Container Reference ID field of the child container. · Referential IntegrityAction: Populate the .csm Container ID of the parent container with a value that matches the .csm Parent Container Reference ID field of the child container.Error location: Referential Integrity3607Referential Integrity Error: The .csm parent Container ID must match the .cqt child container’s Container ID.Populate the .csm parent Container ID field with a value that matches the child container’s .cqt Container ID. · Referential IntegrityAction: Populate the .csm parent Container ID field with a value that matches the child container’s .cqt Container ID.Error location: Referential Integrity3608Referential Integrity Error: The Total Number of Copies from all .cqt child handling unit records must equal the .csm parent record’s Number of Copies.Populate the .csm Number of Copies for the parent record with a value that is equal to the total Number of Copies for all .cqt handling unit records. · Referential IntegrityAction: Populate the .csm Number of Copies for the parent record with a value that is equal to the total Number of Copies for all .cqt handling unit records.Error location: Referential Integrity3609Referential Integrity Error: The Total Number of Pieces from all .cqt child handling unit records must equal the .csm parent record’s Number of Pieces.Populate the .csm Number of Pieces for the parent record with a value that is equal to the total Number of Pieces for all .cqt handling unit records. · Referential IntegrityAction: Populate the .csm Number of Pieces for the parent record with a value that is equal to the total Number of Pieces for all .cqt handling unit records.Error location: Referential Integrity3610Record status for the .seg file does not match the Header File Status.Populate the .seg SEG Record Status field with the same value that is populated in the .hdr Segment File Status field. · Referential IntegrityAction: Populate the .seg SEG Record Status field with the same value that is populated in the .hdr Segment File Status field.Error location: Referential Integrity3611Record status for the .mpu file does not match the Header File Status.Populate the .mpu MUP Record Status field with the same value that is populated in the .hdr Mail Piece Unit File Status field. · Referential IntegrityAction: Populate the .mpu MUP Record Status field with the same value that is populated in the .hdr Mail Piece Unit File Status field.Error location: Referential Integrity3612Record status for the .mcr file does not match the Header File Status.Populate the .mcr MCR Record Status field with the same value that is populated in the .hdr MPU / C Relationship File Status field. · Referential IntegrityAction: Populate the .mcr MCR Record Status field with the same value that is populated in the .hdr MPU / C Relationship File Status field.Error location: Referential Integrity3613Record status for the .mpa file does not match the Header File Status.Populate the .mpa MPA Record Status field with the same value that is populated in the .hdr Mailer Postage Account File Status field. · Referential IntegrityAction: Populate the .mpa MPA Record Status field with the same value that is populated in the .hdr Mailer Postage Account File Status field.Error location: Referential Integrity3614Record status for the .cpt file does not match the Header File Status.Populate the .cpt CPT Record Status field with the same value that is populated in the .hdr Component File Status field. · Referential IntegrityAction: Populate the .cpt CPT Record Status field with the same value that is populated in the .hdr Component File Status field.Error location: Referential Integrity3615Record status for the .csm file does not match the Header File Status.Populate the .csm CSM Record Status field with the same value that is populated in the .hdr Container Summary File Status field. · Referential IntegrityAction: Populate the .csm CSM Record Status field with the same value that is populated in the .hdr Container Summary File Status field.Error location: Referential Integrity3616Record status for the .cqt file does not match the Header File Status.Populate the .cqt CQT Record Status field with the same value that is populated in the .hdr Container Quantity Status field. · Referential IntegrityAction: Populate the .cqt CQT Record Status field with the same value that is populated in the .hdr Container Quantity Status field.Error location: Referential Integrity3617Record status for the .pqt file does not match the Header File Status.Populate the .pqt PQT Record Status field with the same value that is populated in the .hdr Package Quantity Status field. · Referential IntegrityAction: Populate the .pqt PQT Record Status field with the same value that is populated in the .hdr Package Quantity Status field.Error location: Referential Integrity3619The .pdr PDR Record Status field does not match the .hdr Piece Detail File Status field.Populate the .pdr PDR Record Status field with the same value that is populated in the .hdr Piece Detail File Status field. · Referential IntegrityAction: Populate the .pdr PDR Record Status field with the same value that is populated in the .hdr Piece Detail File Status field.Error location: Referential Integrity3620Record status for the .par file does not match the Header File Status.Populate the .par PAR Record Status field with the same value that is populated in the .hdr Postage Adjustment File Status field. · Referential IntegrityAction: Populate the .par PAR Record Status field with the same value that is populated in the .hdr Postage Adjustment File Status field.Error location: Referential Integrity3630Referential Integrity Error: The Total Number of Copies from all .pqt child handling unit records must equal the .cqt parent record’s Number of Copies.Verify that the Total Number of Copies from all .pqt Child Handling Units equals the .cqt Parent Record’s Number of Copies. · Referential IntegrityAction: Verify that the Total Number of Copies from all .pqt Child Handling Units equals the .cqt Parent Record’s Number of Copies.Error location: Referential Integrity3631Referential Integrity Error: The Total Number of Pieces from all .pqt child handling unit records must equal the .cqt parent record’s Number of Pieces.Verify that the Total Number of Pieces from all .pqt Child Handling Units equals the .cqt Parent Record’s Number of Pieces. · Referential IntegrityAction: Verify that the Total Number of Pieces from all .pqt Child Handling Units equals the .cqt Parent Record’s Number of Pieces.Error location: Referential Integrity3634Referential Integrity Error: The .csm Sibling Container Reference ID does not have a matching .csm Container ID.Populate the .csm Sibling Container Reference ID with a value that matches a .csm Container ID. · Referential IntegrityAction: Populate the .csm Sibling Container Reference ID with a value that matches a .csm Container ID.Error location: Referential Integrity3636A container with the .csm Sibling Container Indicator field populated with Y=Yes, must be referenced by other containers. The value provided was {1}.When the .csm Sibling Container Indicator field is populated with Y, other containers must be referenced. · Referential IntegrityAction: When the .csm Sibling Container Indicator field is populated with Y, other containers must be referenced.Error location: Referential Integrity3638The .seg Container and Bundle Charge Method field value provided was {1}; it must contain 0 – no publications in the mailing when the .seg Class Defining Preparation field is not populated with 2 = Periodicals.Populate the .seg Container and Bundle Charge Method field with 0 when the .seg Class Defining Preparation field is not populated with 2. · .segAction: Populate the .seg Container and Bundle Charge Method field with 0 when the .seg Class Defining Preparation field is not populated with 2.Error location: .seg3639The value provided for the .cpt Component – Rate Type field was {1}; it must contain R = Regular (US/MEX/CAN), S = Science of Agriculture, C = Classroom, W = Science of Agriculture Limited Circulation, Y = Regular Limited Circulation, M = Repositionable Component, Z – Included, part of host postage, or H = Per Ride-Along when Component – Class is populated with 5 = Per Pending.Populate the .cpt Component – Rate Type field with R, N, S, C, W, Y, M, Z, or H when Component – Class is populated with 5. · .cptAction: Populate the .cpt Component – Rate Type field with R, N, S, C, W, Y, M, Z, or H when Component – Class is populated with 5.Error location: .cpt3640MPU Rate Type Field and MPU Processing Category Field must be populated to populate the MPU Class Field.Populate the .mpu Mail Piece Unit – Rate Type and .mpu Mail Piece Unit – Processing Category fields when populating the .mpu Mail Piece Unit – Class field. · .mpuAction: Populate the .mpu Mail Piece Unit – Rate Type and .mpu Mail Piece Unit – Processing Category fields when populating the .mpu Mail Piece Unit – Class field.Error location: .mpu3644The Component – Processing Category field of the .cpt does not match the Processing Category in the .mpu.Populate the .cpt Component – Processing Category field with a value that matches the .mpu Mail Piece Unit – Processing Category field value. · Referential IntegrityAction: Populate the .cpt Component – Processing Category field with a value that matches the .mpu Mail Piece Unit – Processing Category field value.Error location: Referential Integrity3647For Full Service Processing, the .pdr IM Barcode field was {1}, it must contain 31 alphanumeric characters followed by spaces when the .seg Principal Processing Category field is populated with LT = Letters, FL = Flats, or CD = Cards.Populate the .pdr IM Barcode field with 31 alphanumeric characters followed by spaces when the .seg Principal Processing Category field is populated with LT = Letters, FL = Flats, or CD = Cards. · .pdrAction: Populate the .pdr IM Barcode field with 31 alphanumeric characters followed by spaces when the .seg Principal Processing Category field is populated with LT = Letters, FL = Flats, or CD = Cards.Error location: .pdr3648When the .mcr – Primary MPA ID field is populated with a .mpa MPA – Unique Sequence/Grouping ID that has a .mpa Postage Payment method of M = Metered: Neither L = Metered: Lowest C = Metered: Correct or S = Stamp, then the .mcr – Additional Postage MPA ID field must be populated with a .mpa MPA – Unique Sequence/Grouping ID that has a .mpa Postage Payment Method of P = Permit or G = Govt. – Fed (use Permit), M = Metered: Neither, L = Metered: Lowest, C = Metered: Correct, or S = Stamp. The value provided was {1}.Populate the .mcr Additional Postage MPA ID field with a .mpa MPA – Unique Sequence/Grouping ID that has a .mpa Postage Payment Method of P, G, M, L, C, or S. · Multiple FilesAction: Populate the .mcr Additional Postage MPA ID field with a .mpa MPA – Unique Sequence/Grouping ID that has a .mpa Postage Payment Method of P, G, M, L, C, or S.Error location: Multiple Files3650The .pqt Package Level field value provided was {1}; it must contain A = Firm, B = Carrier Route, C = 5 Digit, D = Unique 3-F = 3 Digit, H = ADC, I = AADC, K = Origin MxADC, L = MxADC, M = MxAADC, T = 3-D Scheme, U = 5-D Scheme + L007, or V = NDC when the .mpu Mail Piece Unit - Class field is populated with 2 (Periodicals).Populate the .pqt Package Level field with A, B, C, D, F, H, I, K, L, M, T, U, or V when the .mpu Mail Piece Unit - Class field is populated with 2. · .pqtAction: Populate the .pqt Package Level field with A, B, C, D, F, H, I, K, L, M, T, U, or V when the .mpu Mail Piece Unit - Class field is populated with 2.Error location: .pqt3651The .pqt Package Level field value provided was {1}; it must contain A = Firm,B = Carrier Route, C = 5 Digit, D = Unique 3- F = 3 Digit, H = ADC, I = AADC, K = Origin MxADC, L = MxADC, M = MxAADC, 9 = other, R = Parcel, S = Multi-pc Parcel, T = 3-D Scheme, U = 5-D Scheme + L007, or V = NDC when the .mpu Mail Piece Unit - Class is populated with 1(First class), 3(Std Mail), or 4(Pkg Services).Populate the .pqt Package Level field with A, B, C, D, F, H, I, K, L, M, 9, R, S, T, U, or V when the .mpu Mail Piece Unit - Class is populated with 1, 3, or 4 · .pqtAction: Populate the .pqt Package Level field with A, B, C, D, F, H, I, K, L, M, 9, R, S, T, U, or V when the .mpu Mail Piece Unit - Class is populated with 1, 3, or 4Error location: .pqt3653The .seg Automation Coding Date field cannot be populated with a date that is earlier than 90 calendar days before the .csm Postage Statement Mailing Date when the .cqt Rate Category field is populated with A= Saturation ECR, B= High Density ECR, or D= Carrier Route. The value provided was {1}.Populate the .seg Automation Coding Date field with a value that is less than 90 calendar days before the .csm Postage Statement Mailing Date when the .cqt Rate Category field is populated with A, B, or D. · Multiple FilesAction: Populate the .seg Automation Coding Date field with a value that is less than 90 calendar days before the .csm Postage Statement Mailing Date when the .cqt Rate Category field is populated with A, B, or D.Error location: Multiple Files3657The .pdr IM Barcode field provided value was {1}; it must contain 34 alphanumeric characters when the .seg Principal Processing Category field is populated with IR= Nonstandard Parcel, MP= Machinable Parcel, or PF= Parcel, First Class.Populate the .pdr IM Barcode field with 34 alphanumeric characters followed by spaces when the .seg Principal Processing Category field is populated with IR, MP, or PF. · .pdrAction: Populate the .pdr IM Barcode field with 34 alphanumeric characters followed by spaces when the .seg Principal Processing Category field is populated with IR, MP, or PF.Error location: .pdr3658The .cqt Rate Category field value provided was {1}; it must contain A = Saturation ECR, A1 = Non Automation Saturation ECR, B = High Density ECR, B1 = Non Automation High Density ECR, C = High Density Plus ECR, C1 = Nonautomation High Density Plus ECR, D1 = Non Automation Basic Carrier Route, E = 5 Digit Barcode, G = 5 Digit, H = 3 Digit Barcode, K = 3 Digit, N = Presort, PO = Plus One, S = Single-Piece, L2 = MxAADC/Mixed BC, L6 = MxADC/Mixed, L7 = AADC/3 Digit Machinable or L8 = MxAADC/Mixed Machinable for when the .mpu Mail Piece Unit - Class field is populated with 3(Std Mail) and the .mpu Mail Piece Unit - Processing Category field is populated with LT(Letter).Populate the .cqt Rate Category with A, A1, B, B1, C, C1, D1, E, G, H, K, N, PO, S, L2, L6, L7, or L8 for when the .mpu Mail Piece Unit - Class field is populated with 3 and the .mpu Mail Piece Unit - Processing Category field is populated with LT = Letters. · .cqtAction: Populate the .cqt Rate Category with A, A1, B, B1, C, C1, D1, E, G, H, K, N, PO, S, L2, L6, L7, or L8 for when the .mpu Mail Piece Unit - Class field is populated with 3 and the .mpu Mail Piece Unit - Processing Category field is populated with LT = Letters.Error location: .cqt3659The .cqt Rate Category field contains an invalid value; it must contain A = Saturation ECR, B = High Density ECR, D = Carrier Route, K = 3 Digit, G = 5 Digit, P8 = Mixed NDC, S = Single-Piece, or N = Presort (1C, 4C) when the .mpu Mail Piece Unit - Class field is populated with 3 (Std Mail) and the .mpu Mail Piece Unit - Processing Category field is populated with MP (Machinable Parcel).Populate the .cqt Rate Category with A, B, D, K, G, P8, S, or N when the .mpu Mail Piece Unit - Class field is populated with 3 and the .mpu Mail Piece Unit - Processing Category field is populated with MP. · .cqtAction: Populate the .cqt Rate Category with A, B, D, K, G, P8, S, or N when the .mpu Mail Piece Unit - Class field is populated with 3 and the .mpu Mail Piece Unit - Processing Category field is populated with MP.Error location: .cqt3660The .cqt Rate Category field value provided was {1}; it must contain A = Saturation ECR, B = High Density ECR, D = Carrier Route, K = 3 Digit, G = 5 Digit, L6 = MxADC/Mixed, S = Single-Piece, or N = Presort (1C, 4C) when the .mpu Mail Piece Unit - Class field is populated with 3 (Std Mail) and the .mpu Mail Piece Unit - Processing Category field is populated with IR (Nonstandard Parcel).Populate the .cqt Rate Category with A, B, D, K, G, L6, S, or N when the .mpu Mail Piece Unit - Class field is populated with 3 and the .mpu Mail Piece Unit - Processing Category field is populated with IR. · .cqtAction: Populate the .cqt Rate Category with A, B, D, K, G, L6, S, or N when the .mpu Mail Piece Unit - Class field is populated with 3 and the .mpu Mail Piece Unit - Processing Category field is populated with IR.Error location: .cqt3661For .cqt File Processing, the .cqt Rate Category contains an invalid value; it must contain NG, NK, N5, and N6 for USPS Marketing Mail – NFM.Populate the .cqt Rate Category with NG, NK, N5, and N6 for USPS Marketing Mail – NFM. · .cqtAction: Populate the .cqt Rate Category with NG, NK, N5, and N6 for USPS Marketing Mail – NFM.Error location: .cqt3662Referential Integrity Error: The Segment ID, MPU ID and Component ID Composite Key in the .par file does not have a corresponding parent Segment ID, MPU ID and Component ID in the .mcr file.Populate the .par Segment ID, Mail Piece Unit ID, and Component ID fields with a value that corresponds to a parent .mcr Segment ID, Mail Piece Unit ID, and Component ID. · .segAction: Populate the .par Segment ID, Mail Piece Unit ID, and Component ID fields with a value that corresponds to a parent .mcr Segment ID, Mail Piece Unit ID, and Component ID.Error location: .seg3664The .mpa Publication Number must be Numeric to validate against the PostalOne! Permit data.Populate the .mpa USPS Publication Number field with a numeric value. · .mpaAction: Populate the .mpa USPS Publication Number field with a numeric value.Error location: .mpa3665The .mpa Permit Number must be populated with a numeric value to validate against the PostalOne! Permit data.Populate the .mpa Permit Number field with a numeric value. · .mpaAction: Populate the .mpa Permit Number field with a numeric value.Error location: .mpa3669The .mcr Primary MPA ID field must match the .mpa MPA Unique Sequence/Grouping ID field of the first job submission. The value provided was{1}.Populate the .mcr Primary MPA ID field with the same value as the .mpa MPA Unique Sequence/Grouping ID field of the first job submission. · .mpaAction: Populate the .mcr Primary MPA ID field with the same value as the .mpa MPA Unique Sequence/Grouping ID field of the first job submission.Error location: .mpa3670The .mpu Mail Piece Unit – Class value provided was {1}; it must contain the same value as the .seg Class Defining Preparation for all mail except for Pending Periodicals or when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpu Mail Piece Unit – Class field with the same value as the .seg Class Defining Preparation field. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Class field with the same value as the .seg Class Defining Preparation field.Error location: Multiple Files3672For MLOCR Mailings, the Component Weight information must be populated.Populate the .cpt Component – Weight, .cpt Component – Weight: Source, and .cpt Component – Weight: Status fields. · MLOCR MailingsAction: Populate the .cpt Component – Weight, .cpt Component – Weight: Source, and .cpt Component – Weight: Status fields.Error location: MLOCR Mailings3674One field between the USPS Publication Number and Permit Number must be populated in .mpa file record.Populate either the .mpa USPS Publication Number field or the .mpa Permit Number field. · .mpaAction: Populate either the .mpa USPS Publication Number field or the .mpa Permit Number field.Error location: .mpa3675The .cpt Component – Rate Type field must be populated with R = Regular (US/MEX/CAN) or Z – Included, part of host postage when the .cpt Component – Class field is populated with 1 = First Class and mpu. Mail Piece Unit – Class field is populated with 2 = Periodicals, 4 = Pkg Services, or 5 = Per Pending. The value provided was {1}.Populate the .cpt Component – Rate Type field with R or Z when the .cpt Component – Class field is populated with 1 and mpu. Mail Piece Unit – Class field is populated with 2, 4, or 5. · Multiple FilesAction: Populate the .cpt Component – Rate Type field with R or Z when the .cpt Component – Class field is populated with 1 and mpu. Mail Piece Unit – Class field is populated with 2, 4, or 5.Error location: Multiple Files3676The .cpt Component – Rate Type field must be populated with R = Regular (US/MEX/CAN) or Z – Included, part of host postage when the .cpt Component – Class field is populated with 3 = Std Mail and .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals, 4 = Pkg Services, or 5 = Per Pending. The value provided was {1}.Populate the .cpt Component – Rate Type field with R or Z when the .cpt Component – Class field is populated with 3 and the .mpu Mail Piece Unit – Class field is populated with 2, 4, or 5. · Multiple FilesAction: Populate the .cpt Component – Rate Type field with R or Z when the .cpt Component – Class field is populated with 3 and the .mpu Mail Piece Unit – Class field is populated with 2, 4, or 5.Error location: Multiple Files3677The .csm Postage Statement Mailing Date field is required when the .csm Sibling Container Indicator field is not populated and the .csm Container Status field is populated with R=Ready to pay. The value provided was {1}.Populate the .csm Postage Statement Mailing Date field when the .csm Sibling Container Indicator field is not populated and the .csm Container Status field is populated with R. · .csmAction: Populate the .csm Postage Statement Mailing Date field when the .csm Sibling Container Indicator field is not populated and the .csm Container Status field is populated with R.Error location: .csm3678For a update job, .csm field container status cannot be blank.Populate the .csm Container Status field for update jobs. · UpdatesAction: Populate the .csm Container Status field for update jobs.Error location: Updates3679For MLOCR mailings, .csm Container Status field cannot be changed to P=Preliminary postage statement.Do not attempt to update the .csm Container Status field to P for MLOCR mailings. · MLOCR MailingsAction: Do not attempt to update the .csm Container Status field to P for MLOCR mailings.Error location: MLOCR Mailings3682The .cpt Component - Rate Type field contains an invalid value; it must contain R, N, S, C, B, H, M, L, F, I, W, Y, Z, J, K, O, E, E1, E2, E7, T, T1, T2, T3, T4, T5, D, D1, D2, D3, D4, D5, D6, D7, D8, D9, or D0. The value provided was {1}.Populate the .cpt Component - Rate Type field with R, N, S, C, B, H, M, L, F, I, W, Y, Z, J, K, O, E, E1, E2, E7, T, T1, T2, T3, T4, T5, D, D1, D2, D3, D4, D5, D6, D7, D8, D9 or D0. · .cptAction: Populate the .cpt Component - Rate Type field with R, N, S, C, B, H, M, L, F, I, W, Y, Z, J, K, O, E, E1, E2, E7, T, T1, T2, T3, T4, T5, D, D1, D2, D3, D4, D5, D6, D7, D8, D9 or D0.Error location: .cpt3683There can be no characters after the Closing Character.Remove all characters that appear after the Closing Character. · Multiple FilesAction: Remove all characters that appear after the Closing Character.Error location: Multiple Files3684The .mpa Postage Payment Method field can only be populated with T = Per Pend (using Permit)when the Mail Piece Unit – Class field is populated with 5 = Per Pending. The value provided was {1}.Populate the .mpa Postage Payment Method field with T when the .mpu Mail Piece Unit – Class field is populated with 5. · .mpaAction: Populate the .mpa Postage Payment Method field with T when the .mpu Mail Piece Unit – Class field is populated with 5.Error location: .mpa3686The value provided for the .csm Container Status field was {1}; it must contain P=Preliminary postage statement, R=Ready to pay or O=Original (when populated) for original submissions.Populate the .csm Container Status field with P, R, or O for original job submissions. · .csmAction: Populate the .csm Container Status field with P, R, or O for original job submissions.Error location: .csm3692Required Field Missing: Service Level Indicator is a required field in the .cqt file.Populate the .cqt Service Level Indicator field. · .cqtAction: Populate the .cqt Service Level Indicator field.Error location: .cqt3694The PAR File cannot be submitted if any PAR records have previously been submitted.Do not attempt to submit a second .par file to the same job. · .parAction: Do not attempt to submit a second .par file to the same job.Error location: .par3696Required Field Missing: Scheduled Pick Up Date is a required field in the .csm file when Scheduled Pick Up Time is present.Populate the .csm Scheduled Pick Up Date field when the .csm Scheduled Pick Up Time field is populated. · .csmAction: Populate the .csm Scheduled Pick Up Date field when the .csm Scheduled Pick Up Time field is populated.Error location: .csm3697SASP Preparation Options field contains an invalid value; it must contain F, B or blank..segError location: .seg3700Required Field Missing: Actual Induction Date is a required field in the .csm file when Actual Induction Time is present.Populate the .csm Actual Induction Date field when the .csm Actual Induction Time field is populated. · .csmAction: Populate the .csm Actual Induction Date field when the .csm Actual Induction Time field is populated.Error location: .csm3701Required Field Missing: Postage Statement Mailing Date is a required field in the .csm file when Postage Statement Mailing Time is present.Populate the .csm Postage Statement Mailing Date field when the .csm Postage Statement Mailing Time field is populated. · .csmAction: Populate the .csm Postage Statement Mailing Date field when the .csm Postage Statement Mailing Time field is populated.Error location: .csm3702Required Field Missing: Scheduled Ship Date is a required field in the .csm file when Scheduled Ship Time is present.Populate the .csm Scheduled Ship Date field when the .csm Scheduled Ship Time field is populated. · .csmAction: Populate the .csm Scheduled Ship Date field when the .csm Scheduled Ship Time field is populated.Error location: .csm3703At least one .par record must be associated to a .csm record with a .csm Container Status of R= Ready to pay.Associate a .par record with a .csm record that has a .csm Container Status for R. · .parAction: Associate a .par record with a .csm record that has a .csm Container Status for R.Error location: .par3706Invalid permit information was entered for the .cpt Component – Rate Type field populated with S = Science of Agriculture. The value provided was {1}.Populate .mpa Permit Number field with a value that maps to .cpt Component – Rate Type S. · .mpaAction: Populate .mpa Permit Number field with a value that maps to .cpt Component – Rate Type S.Error location: .mpa3707Invalid .cpt Class was entered to claim special rates.Populate the .cpt Component – Class field with a value that will map to special rates. · .cptAction: Populate the .cpt Component – Class field with a value that will map to special rates.Error location: .cpt3708Unable to find valid rate code for the permit.Populate the .mpa Permit Number field with a valid value. · .mpaAction: Populate the .mpa Permit Number field with a valid value.Error location: .mpa3709Invalid permit information was entered for the .cpt Component – Rate Type field populated with N = Nonprofit. The value provided was {1}.Populate .mpa Permit Number field with a value that maps to .cpt Component– Rate Type N. · .mpuAction: Populate .mpa Permit Number field with a value that maps to .cpt Component– Rate Type N.Error location: .mpu3710Permit information entered for .cpt Component – Rate Type field is populated with C = Classroom. The value provided was {1}.Populate .mpa Permit Number field with a value that maps to .cpt Component – Rate Type C. · .mpaAction: Populate .mpa Permit Number field with a value that maps to .cpt Component – Rate Type C.Error location: .mpa3711For .cpt File Processing, the equivalent component referenced does not exist.Populate the .cpt Equivalent Component ID field with a value that exists. · .cptAction: Populate the .cpt Equivalent Component ID field with a value that exists.Error location: .cpt3712Numeric Data Type Error: Contact Telephone Number must be a numeric value in the .hdr file.Populate the .hdr Contact Telephone Number field with a numeric value. · .hdrAction: Populate the .hdr Contact Telephone Number field with a numeric value.Error location: .hdr3713The PAR File has already been used to adjust the postage statement.Do not attempt to submit a .par file to adjust a postage statement that was previously adjusted by a .par file. · .parAction: Do not attempt to submit a .par file to adjust a postage statement that was previously adjusted by a .par file.Error location: .par3714The PDR File has already been used to adjust. PAR file cannot be submitted to adjust.Do not attempt to submit a .par file if a .pdr file was previously submitted to adjust the postage statement. · Multiple FilesAction: Do not attempt to submit a .par file if a .pdr file was previously submitted to adjust the postage statement.Error location: Multiple Files3715For MLOCR Mailings, there must be at least one .csm record with the .csm Container Type field populated with L=Logical Tray.Populate the .csm Container Type field with L for at least one record for MLOCR mailings. · MLOCR MailingsAction: Populate the .csm Container Type field with L for at least one record for MLOCR mailings.Error location: MLOCR Mailings3716For Full or Mixed Service mailings, there must be at least one sibling physical handling unit / container for each logical handling unit / container within the .csm file when the .csm Container Status field is populated with R = Ready to pay, and the mailing is not setup as a Simple Mailing.Include at least one sibling physical handling unit or container for each logical handling unit or container when the .csm Container Status field is populated with R, and the mailing is not setup as a Simple Mailing. · MLOCR MailingsAction: Include at least one sibling physical handling unit or container for each logical handling unit or container when the .csm Container Status field is populated with R, and the mailing is not setup as a Simple Mailing.Error location: MLOCR Mailings3717The Component – Periodical Ad Percentage field of the .cpt file must be less than 100%.Populate the .cpt Component – Periodical Ad Percentage field with a value that is less than 100%. · .cptAction: Populate the .cpt Component – Periodical Ad Percentage field with a value that is less than 100%.Error location: .cpt3720Blank line on line {0} of the .seg file..segError location: .seg3721Blank line on line {0} of the .mpu file..mpuError location: .mpu3722Blank line on line {0} of the .cpt file..cptError location: .cpt3723Blank line on line {0} of the .cqt file..cqtError location: .cqt3724Blank line on line {0} of the .pqt file..pqtError location: .pqt3725Blank line on line {0} of the .wsr file..wsrError location: .wsr3726Blank line on line {0} of the .pdr file..pdrError location: .pdr3727Blank line on line {0} of the .sfr file..sfrError location: .sfr3730Blank line on line {0} of the .par file..parError location: .par3733Blank line on line {0} of the .oci file..ociError location: .oci3734Blank line on line {0} of the .mcr file..mcrError location: .mcr3735Blank line on line {0} of the .mpa file..mpaError location: .mpa3736Blank line on line {0} of the .csm file..csmError location: .csm3737Container Charge Allocation must be 7 digits in the .cqt file.Populate the .cqt field with a 7 digit value. · .cqtAction: Populate the .cqt field with a 7 digit value.Error location: .cqt3738The Adjustment Amount must be 9 digits in the .par file.Populate the .par Adjustment Amount field with a 9 digit value. · .parAction: Populate the .par Adjustment Amount field with a 9 digit value.Error location: .par3739The .mpu Mail Piece Unit – Weight field must be populated with 6 digits.Populate the .mpu Mail Piece Unit – Weight field with a 6 digit value. · .mpuAction: Populate the .mpu Mail Piece Unit – Weight field with a 6 digit value.Error location: .mpu3740The MPU Length must be 7 digits in the .mpu file.Populate the .mpu Mail Piece Unit – Length field with a 7 digit value. · .mpuAction: Populate the .mpu Mail Piece Unit – Length field with a 7 digit value.Error location: .mpu3741The MPU Width must be 6 digits in the .mpu file.Populate the .mpu Mail Piece Unit – Width field with a 6 digit value. · .mpuAction: Populate the .mpu Mail Piece Unit – Width field with a 6 digit value.Error location: .mpu3742The MPU Thickness must be 6 digits in the .mpu file.Populate the .mpu Mail Piece Unit – Thickness field with a 6 digit value. · .mpuAction: Populate the .mpu Mail Piece Unit – Thickness field with a 6 digit value.Error location: .mpu3743The .mpu Pre-Denominated Amount field must be populated with 5 digits.Populate the .mpu Mail Piece Unit – Thickness field with a 5 digit value. · .mpuAction: Populate the .mpu Mail Piece Unit – Thickness field with a 5 digit value.Error location: .mpu3744The Component Weight must be 6 digits in the .cpt file.Populate the .cpt Component – Weight field with a 6 digit value. · .cptAction: Populate the .cpt Component – Weight field with a 6 digit value.Error location: .cpt3745The .cpt Component – Length field must be populated with 7 digits in the .cpt file.Populate the .cpt Component – Length field with a 7 digit value. · .cptAction: Populate the .cpt Component – Length field with a 7 digit value.Error location: .cpt3746The .cpt Component – Width field must be populated with 6 digits in the .cpt file.Populate the .cpt Component – Width field with a 6 digit value. · .cptAction: Populate the .cpt Component – Width field with a 6 digit value.Error location: .cpt3747The Component Thickness must be 6 digits in the .cpt file.Populate the .cpt Component – Thickness field with a 6 digit value. · .cptAction: Populate the .cpt Component – Thickness field with a 6 digit value.Error location: .cpt3748The Component Periodical Ad Percentage must be 5 digits in the .cpt file.Populate the .cpt Component – Periodical Ad Percentage field with a 5 digit value. · .cptAction: Populate the .cpt Component – Periodical Ad Percentage field with a 5 digit value.Error location: .cpt3749The Component Ad Percentage Basis must be 6 digits in the .cpt file.Populate the .cpt Ad% Basis field with a 6 digit value. · .cptAction: Populate the .cpt Ad% Basis field with a 6 digit value.Error location: .cpt3750The .csm Total Weight field must be populated with 12 digits (zero fill prior to numeric).Populate the .csm Total Weight field with a 12 digit value. · .csmAction: Populate the .csm Total Weight field with a 12 digit value.Error location: .csm3751The .csm Container Gross Weight field must be populated with 12 digits (zero fill prior to numeric).Populate the .csm Container Gross Weight field with a 12 digit value. · .csmAction: Populate the .csm Container Gross Weight field with a 12 digit value.Error location: .csm3752The Bundle Charge Allocation must be 7 digits in the .pqt file.Populate the .pqt Bundle Charge Allocation field with 7 digits. · .pqtAction: Populate the .pqt Bundle Charge Allocation field with 7 digits.Error location: .pqt3754For non-incidental enclosures, the .mcr Host Statement Component ID field must be populated with its own .mcr Component ID or the host periodicals’ .mcr Component ID within the same .mcr Mail Piece Unit ID. The value provided was {1}.Populate the .mcr Host Statement Component ID field with its own .mcr Component ID or the host periodicals’ .mcr Component ID within the same .mcr Mail Piece Unit ID. · Multiple FilesAction: Populate the .mcr Host Statement Component ID field with its own .mcr Component ID or the host periodicals’ .mcr Component ID within the same .mcr Mail Piece Unit ID.Error location: Multiple Files3755If the .mpu Mail Piece Unit – Class field is equal to the .cpt Component – Class field and the .cpt Component – Rate Type field is populated with M = Repositionable Component or H = Per Ride-Along , then the .mcr Host Statement Component ID field must point to a different Component. The value provided was {1}.Populate the .mcr Host Statement Component ID field with a different Component ID when the .mpu Mail Piece Unit – Class field is equal to the .cpt Component – Class field and the .cpt Component – Rate Type field is populated with M or H. · .mpuAction: Populate the .mcr Host Statement Component ID field with a different Component ID when the .mpu Mail Piece Unit – Class field is equal to the .cpt Component – Class field and the .cpt Component – Rate Type field is populated with M or H.Error location: .mpu3756If the .mpu Mail Piece Unit – Class field does not equal the .cpt Component – Class field and the .cpt Component – Rate Type field is populated with M, H, or Z, and there are multiple potential hosts then the .mcr Host Statement Component ID must be populated. M = Repositionable Component H = Per Ride-Along Z = Included, part of host postage. The value provided was {1}.Populate the .mcr Host Statement Component ID field when the .mpu Mail Piece Unit – Class field is not equal to the .cpt Component – Class field and the .cpt Component – Rate Type field is populated with M, H, or Z. · Multiple FilesAction: Populate the .mcr Host Statement Component ID field when the .mpu Mail Piece Unit – Class field is not equal to the .cpt Component – Class field and the .cpt Component – Rate Type field is populated with M, H, or Z.Error location: Multiple Files3783The .mpa USPS Publication Number field must be populated when the .cpt Component – Class is populated with 2 = Periodicals. The value provided was {1}.Populate the .mpa USPS Publication Number field when the .cpt Component – Class field is populated with 2. · Multiple filesAction: Populate the .mpa USPS Publication Number field when the .cpt Component – Class field is populated with 2.Error location: Multiple files3784The .mpa Permit Number field must be populated when the Component – Class field is populated with 1 = First Class 3 = Std Mail 4 = Pkg Services 5 = Per Pending. The value provided was {1}.Populate the .mpa Permit Number field when the .cpt Component – Class field is populated with 1, 3, 4, or 5. · Multiple FilesAction: Populate the .mpa Permit Number field when the .cpt Component – Class field is populated with 1, 3, 4, or 5.Error location: Multiple Files3785Each logical container must be referenced by at least one physical container when the .hdr Mail.dat Presentation Category field is populated with M = MLOCR, the .seg Full-Service Participation Indicator field is populated F = Full Service or M = Mixed, and the mailing is not setup as a Simple Mailing.Include at least one physical container for each logical container for Full-Service MLOCR mailings, when the mailing is not setup as a Simple Mailing. · Multiple FilesAction: Include at least one physical container for each logical container for Full-Service MLOCR mailings, when the mailing is not setup as a Simple Mailing.Error location: Multiple Files3787The .pdr record does not have an associated container record.Include a container record that is associated to the .pdr record. · Multiple FilesAction: Include a container record that is associated to the .pdr record.Error location: Multiple Files3788Referential Integrity Error: The number of child .pdr records must equal a count between the Number of Pieces and the Number of Copies in the parent .csm file.Verify that the number of child .pdr records is equal to a count between the .csm Number of Copies and .csm Number of Pieces fields. · Referential IntegrityAction: Verify that the number of child .pdr records is equal to a count between the .csm Number of Copies and .csm Number of Pieces fields.Error location: Referential Integrity3790The .cqt Rate Category field value provided was {1}; it cannot contain L = Basic Barcode or N = Presort when the .mpu Mail Piece Unit – Class field is populated with 2 (Periodicals) and the .cqt Periodicals: Not County/In County field is populated with N.Populate the .cqt Rate Category with a value other than L or N when the .mpu Mail Piece Unit – Class field is populated with 2 and the .cqt Periodicals: Not County/In County field is populated with N. · .cqtAction: Populate the .cqt Rate Category with a value other than L or N when the .mpu Mail Piece Unit – Class field is populated with 2 and the .cqt Periodicals: Not County/In County field is populated with N.Error location: .cqt3791The .cqt Rate Category field value provided was {1}: it cannot contain FB = Firm Bundle when the .mpu Mail Piece Unit – Class field is populated with 2(Periodicals) and the .cqt Periodicals: Not County/In County field is populated with I. The value provided was {1}.Populate the .cqt Rate Category with a value other than FB when the .mpu Mail Piece Unit – Class field is populated with 2 and the .cqt Periodicals: Not County/In County field is populated with I. · .cqtAction: Populate the .cqt Rate Category with a value other than FB when the .mpu Mail Piece Unit – Class field is populated with 2 and the .cqt Periodicals: Not County/In County field is populated with I.Error location: .cqt3792For change jobs, only {1} record level status of I, O, and U are allowed. The value provided was {2}.Populate the Record Status field with I, O, or U for change jobs. · .csmAction: Populate the Record Status field with I, O, or U for change jobs.Error location: .csm3793The .cpt Ad % Basis field must be populated when multiple component records with .cpt Periodical Ad Percentage Treatment field populated with S = Carries own Ad Percentage are associated to a single .mpu record. The value provided was {1}.Populate the .cpt Ad % Basis field. · .cptAction: Populate the .cpt Ad % Basis field.Error location: .cpt3794The job cannot be updated because of an associated finalized postage statement.Do not attempt to submit an update to a job that is associated to a postage statement that has been finalized. · UpdatesAction: Do not attempt to submit an update to a job that is associated to a postage statement that has been finalized.Error location: Updates3795The container cannot be updated because of an associated finalized postage statement.Do not attempt to update a container that is associated to a postage statement that has been finalized. · UpdatesAction: Do not attempt to update a container that is associated to a postage statement that has been finalized.Error location: Updates3798If the .mpu Mail Piece Unit – Class field does not equal the .cpt Component – Class field and the .cpt Component – Rate Type field is populated with Z = Included, part of host postage, then the .mcr Host Statement Component ID field must point to a different Component.Populate the .mcr Host Statement Component ID field with a different Component ID when the .mpu Mail Piece Unit – Class field is not equal to the .cpt Component – Class field and the .cpt Component – Rate Type field is populated with Z. · Multiple FilesAction: Populate the .mcr Host Statement Component ID field with a different Component ID when the .mpu Mail Piece Unit – Class field is not equal to the .cpt Component – Class field and the .cpt Component – Rate Type field is populated with Z.Error location: Multiple Files3799The .mpu Postage Affixed Type field must be populated with M if populated when the .mpa Postage Payment Method field is populated with L, C, or M. M = Meter L = Metered: Lowest C = Metered: Correct M = Metered: Neither.Populate the .mpu Postage Affixed Type field with M if populated when the .mpa Postage Payment Method field is populated with L, C, or M. · Multiple FilesAction: Populate the .mpu Postage Affixed Type field with M if populated when the .mpa Postage Payment Method field is populated with L, C, or M.Error location: Multiple Files3800The .mpu Pre-Denominated Amount field must be populated with a value that is greater than zero when the .mpa Postage Payment Method field is populated with M and the associated .mpa Postage Payment Method is also populated with M = Metered: Neither. The value provided was {1}.Populate the .mpu Pre-Denominated Amount field with a value that is greater than zero when the .mpa Postage Payment Method field is populated with M and the associated .mpa Postage Payment Method is also populated with M. · .mpaAction: Populate the .mpu Pre-Denominated Amount field with a value that is greater than zero when the .mpa Postage Payment Method field is populated with M and the associated .mpa Postage Payment Method is also populated with M.Error location: .mpa3801The .mpu Postage Affixed Type field value provided was {1}; it must contain S = Stamp when the .mpa Postage Payment Method is populated with S = Stamp.Populate the .mpu Postage Affixed Type field with S when the .mpa Postage Payment Method field is populated with S. · .mpaAction: Populate the .mpu Postage Affixed Type field with S when the .mpa Postage Payment Method field is populated with S.Error location: .mpa3802The .mpu Pre-Denominated field must be populated with a value that is greater than 0 when the .mpa Postage Payment Method field is populated with S = Stamp and the associated .mpa Postage Payment Method field is also populated with S = Stamp. The value provided was {1}.Populate the .mpu Pre-Denominated Amount field with a value that is greater than zero when the .mpa Postage Payment Method field is populated with S and the associated .mpa Postage Payment Method is also populated with S. · .mpaAction: Populate the .mpu Pre-Denominated Amount field with a value that is greater than zero when the .mpa Postage Payment Method field is populated with S and the associated .mpa Postage Payment Method is also populated with S.Error location: .mpa3803The .seg Automation Coding Date field cannot be populated with a date that is earlier than 180 calendar days before the .csm Postage Statement Mailing Date when the .cqt Rate Category field is populated with E = 5 Digit Barcode, H = 3 Digit Barcode, or L2 = MxAADC/Mixed BC. The value provided was {1}.Populate the .seg Automation Coding Date field with a value that is less than 180 calendar days before the .csm Postage Statement Mailing Date when the .cqt Rate Category field is populated with E, H, or L2. · .segAction: Populate the .seg Automation Coding Date field with a value that is less than 180 calendar days before the .csm Postage Statement Mailing Date when the .cqt Rate Category field is populated with E, H, or L2.Error location: .seg3804For Full-Service Processing, the .cqt Rate Category field value provided was {1}; it must contain E = 5 Digit Barcode, H = 3 Digit Barcode, or L2 = MxAADC/Mixed BC when the .seg Class Defining Preparation is populated with 1(First Class) and the .seg Principal Processing Category field is populated with LT(Letter), FL(Flat), or CD(Card).Populate the .cqt Rate Category field with E, H, or L2 when the .seg Class Defining Preparation is populated with 1 and the .seg Principal Processing Category field is populated with LT = Letters, FL = Flats, or CD = Cards. · .cqtAction: Populate the .cqt Rate Category field with E, H, or L2 when the .seg Class Defining Preparation is populated with 1 and the .seg Principal Processing Category field is populated with LT = Letters, FL = Flats, or CD = Cards.Error location: .cqt3805For Full-Service Processing, the .cqt Rate Category field value provided was {1}; it must contain A = Saturation ECR, B = High Density ECR, C = High Density Plus - ECR, E = 5 Digit Barcode, H = 3 Digit Bacode BC, L2 = MxAADC/Mixed BC, or PO = Plus One when the .seg Class Defining Preparation field is populated with 3 (Std Mail) and the .seg Principal Processing Category field is populated with LT (Letter).Populate the .cqt Rate Category field with A, B, C, E, H, L2, or PO when the .seg Class Defining Preparation field is populated with 3 and the .seg Principal Processing Category field is populated with LT = Letters. · .cqtAction: Populate the .cqt Rate Category field with A, B, C, E, H, L2, or PO when the .seg Class Defining Preparation field is populated with 3 and the .seg Principal Processing Category field is populated with LT = Letters.Error location: .cqt3806For Full-Service Processing, the .cqt Rate Category value provided was {1}; it must contain B = High Density - ECR, C = High Density Plus - ECR, D = Carrier Route, E = 5 Digit Barcode, H = 3 Digit Barcode, or L2 = MxAADC/Mixed BC when the .seg Class Defining Preparation field is populated with 3(Std Mail) and the .seg Principal Processing Category field is populated with FL(Flat).Populate the .cqt Rate Category field with B, C, D, E, H, L2 when the .seg Class Defining Preparation field is populated with 3 and the .seg Principal Processing Category field is populated with FL = Flats. · .cqtAction: Populate the .cqt Rate Category field with B, C, D, E, H, L2 when the .seg Class Defining Preparation field is populated with 3 and the .seg Principal Processing Category field is populated with FL = Flats.Error location: .cqt3807For Full-Service Processing, the .cqt Rate Category field contains an invalid value; it must contain A = Saturation - ECR, B = High Density - ECR, D = Carrier Route, E = 5 Digit Barcode, H = 3 Digit Barcode, L = Basic Barcode, or L2 = MxAADC/Mixed BC when the .seg Class Defining Preparation field is populated with 2(Periodicals), the .seg Principal Processing Category field is populated with LT, and the .cqt Periodicals: Not County/In County field is populated with I.Populate the .cqt Rate Category field with A, B, D, E, H, L, or L2 when the .seg Class Defining Preparation field is populated with 2, the .seg Principal Processing Category field is populated with LT, and the .cqt Periodicals: Not County/In County field is populated with I. · .cqtAction: Populate the .cqt Rate Category field with A, B, D, E, H, L, or L2 when the .seg Class Defining Preparation field is populated with 2, the .seg Principal Processing Category field is populated with LT, and the .cqt Periodicals: Not County/In County field is populated with I.Error location: .cqt3808For Full-Service Processing, the .cqt Rate Category field contains an invalid value; it must contain A = Saturation - ECR, B = High Density - ECR, D = Carrier Route, E = 5 Digit Barcode, H = 3 Digit Barcode, L = Basic Barcode, or L2 = MxAADC/Mixed BC when the .seg Class Defining Preparation field is populated with 2(Periodicals), the .seg Principal Processing Category field is populated with FL, and the .cqt Periodicals: Not County/In County field is populated with I.Populate the .cqt Rate Category field with A, B, D, E, H, L, or L2 when the .seg Class Defining Preparation field is populated with 2, the .seg Principal Processing Category field is populated with FL = Flats, and the .cqt Periodicals: Not County/In County field is populated with I. · .cqtAction: Populate the .cqt Rate Category field with A, B, D, E, H, L, or L2 when the .seg Class Defining Preparation field is populated with 2, the .seg Principal Processing Category field is populated with FL = Flats, and the .cqt Periodicals: Not County/In County field is populated with I.Error location: .cqt3809For Full-Service Processing, the .cqt Rate Category field contains an invalid value; it must contain A = Saturation - ECR, B = High Density - ECR, D = Carrier Route, E = 5 Digit Barcode, FB = Firm Bundle (Not In-County), H = 3 Digit Barcode, or L2 = MxAADC/Mixed BC when the .seg Class Defining Preparation field is populated with 2(Periodicals) and the .seg Principal Processing Category field is populated with LT(Letter), and the .cqt Periodicals:Not County/In County field is populated with N.Populate the .cqt Rate Category field with A, B, D, E, FB, H, or L2 when the .seg Class Defining Preparation field is populated with 2 and the .seg Principal Processing Category field is populated with LT, and the .cqt Periodicals: Not County/In County field is populated with N. · .cqtAction: Populate the .cqt Rate Category field with A, B, D, E, FB, H, or L2 when the .seg Class Defining Preparation field is populated with 2 and the .seg Principal Processing Category field is populated with LT, and the .cqt Periodicals: Not County/In County field is populated with N.Error location: .cqt3815{2} field in the {1} file cannot be updated for a MLOCR job.Do not attempt to update the {1} in the {2} file for an MLOCR job. · MLOCR JobAction: Do not attempt to update the {1} in the {2} file for an MLOCR job.Error location: MLOCR Job3816The update job is referencing a container that does not exist in the original submission.Verify that all containers in the update job was included in the original job submission. · UpdatesAction: Verify that all containers in the update job was included in the original job submission.Error location: Updates3820The .csm Entry Point – Actual / Delivery – Locale Key specified must begin with “LOC” followed by six alphanumeric characters or contain “ORIGIN” when the .csm Entry Point for Entry Discount – Facility Type field is populated with O=Origin, H=Trans Hub, or T = Orig(T-Hub Sq). The value provided was {1}.Populate the .csm Entry Point – Actual/Delivery Locale Key field with “LOC” followed by 6 alphanumeric characters or “ORIGIN” when the .csm Entry Point for Entry Discount – Facility Type field is populated with O, H, or T. · .csmAction: Populate the .csm Entry Point – Actual/Delivery Locale Key field with “LOC” followed by 6 alphanumeric characters or “ORIGIN” when the .csm Entry Point for Entry Discount – Facility Type field is populated with O, H, or T.Error location: .csm3821The .csm Entry Point – Actual / Delivery – Locale Key specified must begin with “LOC” followed by six alphanumeric characters when the .csm Entry Point for Entry Discount – Facility Type field is not populated with O = Origin or H = Trans Hub. The value provided was {1}.Populate the .csm Entry Point – Actual / Delivery Local Key field with “LOC” followed by 6 alphanumeric characters when the .csm Entry Point for Entry Discount – Facility Type field is not populated with O or H. · .csmAction: Populate the .csm Entry Point – Actual / Delivery Local Key field with “LOC” followed by 6 alphanumeric characters when the .csm Entry Point for Entry Discount – Facility Type field is not populated with O or H.Error location: .csm3822The value provided for .mpa Mail Owner’s Lcl Permit Ref Num / Int’l Bill Num and .mpa Mail Owner’s Lcl Permit Ref Num / Int’l Bill Num – Type combination was {1}; the permit must reference an active permit for the associated .mpa Postage Payment Method at the .mpa Permit ZIP+4 code.Populate the .mpa Mail Owner’s Lcl Permit Ref Num / Int’l Bill Num and .mpa Mail Owner’s Lcl Permit Ref Num / Int’l Bill Num – Type field with a value that references an active permit. · .mpaAction: Populate the .mpa Mail Owner’s Lcl Permit Ref Num / Int’l Bill Num and .mpa Mail Owner’s Lcl Permit Ref Num / Int’l Bill Num – Type field with a value that references an active permit.Error location: .mpa3823The .csm Label: IM Container or IM Tray Barcode field must be populated when the .seg Full-Service Participation Indicator field is populated with F = Full Service or M=Mixed and the .csm Sibling Container Indicator field is populated with Y = Yes, when the mailing is not setup as a Simple Mailing.Populate the .csm Label: IM Container or IM Tray Barcode field when the .seg Full-Service Participation Indicator field is populated with F or M and the .csm Sibling Container Indicator field is populated with Y, when the mailing is not setup as a Simple Mailing. · .csmAction: Populate the .csm Label: IM Container or IM Tray Barcode field when the .seg Full-Service Participation Indicator field is populated with F or M and the .csm Sibling Container Indicator field is populated with Y, when the mailing is not setup as a Simple Mailing.Error location: .csm3824Permit information pertaining to the .mpa Mail Owner’s Lcl Permit Ref Num field was entered for the .mpu Mail Piece Unit – Rate Type field populated with S. S = Science of Agriculture. The value provided was {1}.Populate .mpa Mail Owner’s Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type S. · .mpaAction: Populate .mpa Mail Owner’s Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type S.Error location: .mpa3825A valid rate code for the .mpa Mail Owner’s Lcl Permit Ref Num field cannot be found. The value provided was {1}.Populate the .mpa Mail Owner’s Lcl Permit Ref Num field with a value that is associated to a valid rate code. · .mpaAction: Populate the .mpa Mail Owner’s Lcl Permit Ref Num field with a value that is associated to a valid rate code.Error location: .mpa3827Permit information pertaining to the .mpa Mail Owner’s Lcl Permit Ref Num field was entered for the .mpu Mail Piece Unit – Rate Type field populated with C=Classroom. The value provided was {1}.Populate .mpa Mail Owner’s Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type C. · .mpaAction: Populate .mpa Mail Owner’s Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type C.Error location: .mpa3829The value provided for .mpa USPS Publication Number and .mpa Postage Payment Method combination was {1}; the .mpa USPS Publication Number must reference an active permit for the associated .mpa Postage Payment Method.Populate the .mpa USPS Publication Number field with a value that references an active permit for the associated .mpa Postage Payment Method. · .mpaAction: Populate the .mpa USPS Publication Number field with a value that references an active permit for the associated .mpa Postage Payment Method.Error location: .mpa3830Permit information was entered for the .cpt Component – Rate Type field populated with W = Science of Agriculture Limited Circulation. The value provided was {1}.Populate .mpa Permit Number field with a value that maps to .cpt Component – Rate Type W. · .mpaAction: Populate .mpa Permit Number field with a value that maps to .cpt Component – Rate Type W.Error location: .mpa3831Permit information was entered for the .cpt Component– Rate Type field populated with Y = Regular Limited Circulation. The value provided was {1}.Populate .mpa Permit Number field with a value that maps to .cpt Component – Rate Type Y. · .mpaAction: Populate .mpa Permit Number field with a value that maps to .cpt Component – Rate Type Y.Error location: .mpa3832Permit information pertaining to the .mpa Mail Owner’s Lcl Permit Ref Num field was entered for the .mpu Mail Piece Unit – Rate Type field populated with W = Science of Agriculture Limited Circulation . The value provided was {1}.Populate .mpa Mail Owner’s Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type W. · .mpaAction: Populate .mpa Mail Owner’s Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type W.Error location: .mpa3833Permit information pertaining to the .mpa Mail Owner’s Lcl Permit Ref Num field was entered for the .mpu Mail Piece Unit – Rate Type field populated with Y = Regular Limited Circulation. The value provided was {1}.Populate .mpa Mail Owner’s Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type Y. · .mpaAction: Populate .mpa Mail Owner’s Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type Y.Error location: .mpa3834The .seg Full-Service Participation Indicator field is required when the .cqt Service Level Indicator field is populated with F=Full service. (CQT Database ID of {1}).Populate the .seg Full-Service Participation Indicator when the .cqt Service Level Indicator field is populated. · Multiple FilesAction: Populate the .seg Full-Service Participation Indicator when the .cqt Service Level Indicator field is populated.Error location: Multiple Files3835A postage statement with a status of PAV, AVW, FAI, PAS, PEN, COM, FIN, FPP, or UPD cannot be deleted. The value provided was {1}.Do not attempt to delete a job with a postage statement that has a status of PAV, AVW, FAI, PAS, PEN, COM, FIN, FPP, or UPD. · Multiple FilesAction: Do not attempt to delete a job with a postage statement that has a status of PAV, AVW, FAI, PAS, PEN, COM, FIN, FPP, or UPD.Error location: Multiple Files3837Numeric Data Type Error: IM Barcode must be a numeric value in the .pdr file (when populated).Populate the .pdr IM Barcode field with a numeric value when populated. · .pdrAction: Populate the .pdr IM Barcode field with a numeric value when populated.Error location: .pdr3838This postage statement is ‘in progress’ by the USPS and cannot be canceled or deleted.Do not attempt to delete a job when the associated postage statement is in progress. · UpdatesAction: Do not attempt to delete a job when the associated postage statement is in progress.Error location: Updates3900The .seg Verification Facility Zip+4 must be populated with exactly five or nine numeric characters.Populate the .seg Verification Facility ZIP+4 field with 5 or 9 numeric characters. · .segAction: Populate the .seg Verification Facility ZIP+4 field with 5 or 9 numeric characters.Error location: .seg3901All updates made to a job submitted with a .pdr file must be made with a .pdr file and not with a .pbc file.Verify that a .pdr file is included in an update job if the .pdr file was included in the original job submission. · Multiple FilesAction: Verify that a .pdr file is included in an update job if the .pdr file was included in the original job submission.Error location: Multiple Files3903All incidental enclosures included within this mailing must refer back to a host within the .mpu file.Reference a host in the .mpu for incidental enclosures. · .mpuAction: Reference a host in the .mpu for incidental enclosures.Error location: .mpu3904The incidental enclosures included within this mailing must refer back to a .mcr Host Statement Component ID within the same .mpu. The value provided was {1}.Reference a .mcr Host Statement Component ID within the same .mpu for the incidental enclosures. · Multiple FilesAction: Reference a .mcr Host Statement Component ID within the same .mpu for the incidental enclosures.Error location: Multiple Files3905The .oci file Job ID of the current line does not equal the .hdr file Job ID.Populate the .oci Job ID field with the same value that is populated in the .hdr Job ID. · .ociAction: Populate the .oci Job ID field with the same value that is populated in the .hdr Job ID.Error location: .oci3906There can be no characters after the closing character.Remove all characters after the .oci Closing Character field. · .ociAction: Remove all characters after the .oci Closing Character field.Error location: .oci3907Required Field Missing: Job ID is a required field in the .oci file.Populate the .oci Job ID field. · .ociAction: Populate the .oci Job ID field.Error location: .oci3908Required Field Missing: Closing Character is a required field in the .oci file.Populate the .oci Closing Character field. · .ociAction: Populate the .oci Closing Character field.Error location: .oci3909Required Field Missing: Container ID is a required field in the .oci file.Populate the .oci Container ID field. · .ociAction: Populate the .oci Container ID field.Error location: .oci3910Required Field Missing: Original Job ID is a required field in the .oci file.Populate the .oci Original Job ID field. · .ociAction: Populate the .oci Original Job ID field.Error location: .oci3911Required Field Missing: Original User License Code is a required field in the .oci file.Populate the .oci Original User License Code field. · .ociAction: Populate the .oci Original User License Code field.Error location: .oci3912Required Field Missing: Original Segment ID is a required field in the .oci file.Populate the .oci Original Segment ID field. · .ociAction: Populate the .oci Original Segment ID field.Error location: .oci3913Required Field Missing: Original Container ID is a required field in the .oci file.Populate the .oci Original Container ID field. · .ociAction: Populate the .oci Original Container ID field.Error location: .oci3914Required Field Missing: Original Display Container ID is a required field in the .oci file.Populate the .oci Original Display Container ID field. · .ociAction: Populate the .oci Original Display Container ID field.Error location: .oci3915The .oci Record Status field must be populated with either O=Original, D=Delete, I=Insert or U= Update. The value provided was {1}.Populate the .oci OCI Record Status field · .ociAction: Populate the .oci OCI Record Status fieldError location: .oci3922Alphanumeric Data Type Error: Original User License Code must be an alphanumeric value in the .oci file.Populate the .oci Original User License Code field with an alphanumeric value. · .ociAction: Populate the .oci Original User License Code field with an alphanumeric value.Error location: .oci3923The .csm Included In Other Documentation field cannot be populated with both O=Original container and L=Linked or new container in a co-palletization Job.Do not attempt to populate the .csm Included In Other Documentation field with O and L in a single co-palletization job · .ociAction: Do not attempt to populate the .csm Included In Other Documentation field with O and L in a single co-palletization jobError location: .oci3924The .seg Class Defining Preparation field value provided was {1}; it must contain 1 = First Class, 2 = Periodicals, 3 = Std Mail, 4 = Pkg Services, or 6 = Std/Bound Printed Matter/Periodicals Co-Mailings when the .csm Included in Other Documentation field is populated with O = Original Container, I = Internal co-palletization indicator from the Origin Job – Original Container or L = Linked or new container.Populate the .seg Class Defining Preparation field with 1, 2, 3, 4, or 6 when the .csm Included in Other Documentation field is populated with O, I or L. · .csm, .segAction: Populate the .seg Class Defining Preparation field with 1, 2, 3, 4, or 6 when the .csm Included in Other Documentation field is populated with O, I or L.Error location: .csm, .seg3925The .seg Principal Processing Category field value provided was {1}; it must contain CD=Card, FL=Flat, or LT= Letter when the .csm Included in Other Documentation field is populated with O = Original Container, I = Internal co-palletization indicator from the Origin Job – Original Container or L = Linked and the .seg Class Defining Preparation is populated with 1 = First Class.Populate the .seg Principal Processing Category field with CD, FL, or LT when the .csm Included in Other Documentation field is populated with O, I or L and the .seg Class Defining Preparation is populated with 1. · Csm, .segAction: Populate the .seg Principal Processing Category field with CD, FL, or LT when the .csm Included in Other Documentation field is populated with O, I or L and the .seg Class Defining Preparation is populated with 1.Error location: Csm, .seg3926The value provided for the .csm Container Type field was {1}; it must be contain O=1 Tray, T=2 Tray, E=EMM tray, L=Logical Tray, or F=Flat Tub when the .csm Included in Other Documentation field is populated with O=Original Container, I =Internal Co-palletization Indicator, or L=Linked or New Container, and the .seg Class Defining Preparation is populated with 1=First-Class.Populate the .csm Container Type field with O, T, E, L, or F when the .csm Included in Other Documentation field is populated with O, I or L, and the .seg Class Defining Preparation is populated with 1. · .csm, .segAction: Populate the .csm Container Type field with O, T, E, L, or F when the .csm Included in Other Documentation field is populated with O, I or L, and the .seg Class Defining Preparation is populated with 1.Error location: .csm, .seg3927The .seg Principal Processing Category field value provided was{1}; it must contain FL=Flat when the .csm Included in Other Documentation field is populated with O = Original Container, I = Internal co-palletization indicator from the Origin Job – Original Container or L = Linked and the .seg Class Defining Preparation field is populated with 2 = Periodicals.Populate the .seg Principal Processing Category field with FL = Flats when the .csm Included in Other Documentation field is populated with O, I or L and the .seg Class Defining Preparation field is populated with 2. · .csm, .segAction: Populate the .seg Principal Processing Category field with FL = Flats when the .csm Included in Other Documentation field is populated with O, I or L and the .seg Class Defining Preparation field is populated with 2.Error location: .csm, .seg3928The value provided for The .csm Container Type field was {1}; it must contain V = Sack (virtual), S = Sack, 1 = #1 Sack, 2 = #2 Sack, 3 = #3 Sack, 4 = 01V Sack, or 5 = 03V Sack when the .csm Included in Other Documentation field is populated with L = Linked or new container, and the .seg Class Defining Preparation is populated with 2 = Periodicals.Populate the .csm Container Type field with V, S, 1, 2, 3, 4, or 5 when the .csm Included in Other Documentation field is populated with L, and the .seg Class Defining Preparation is populated with 2. · .ociAction: Populate the .csm Container Type field with V, S, 1, 2, 3, 4, or 5 when the .csm Included in Other Documentation field is populated with L, and the .seg Class Defining Preparation is populated with 2.Error location: .oci3929The .seg Principal Processing Category value provided was {1}; it must contain FL=Flat or LT= Letter when the .csm Included in Other Documentation field is populated with O = Original Container, I = Internal co-palletization indicator from the Origin Job – Original Container or L = Linked and the .seg Class Defining Preparation is field is populated with 3 = Std Mail.Populate the .seg Principal Processing Category field with FL = Flats or LT when the .csm Included in Other Documentation field is populated with O, I or L and the .seg Class Defining Preparation is field is populated with 3. · .csm, .segAction: Populate the .seg Principal Processing Category field with FL = Flats or LT when the .csm Included in Other Documentation field is populated with O, I or L and the .seg Class Defining Preparation is field is populated with 3.Error location: .csm, .seg3930The value provided for The .csm Container Type field was {1}; it must contain O = 1 Tray, T = 2 Tray, E = EMM Tray, L = Logical Tray, or F = Flat Tub when the .csm Included in Other Documentation field is populated with O = Original container or L = Linked or new container, and the .seg Class Defining Preparation is populated with 3 = Std Mail, and the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letter.Populate the .csm Container Type field with O, T, E, L, or F when the .csm Included in Other Documentation field is populated with O or L, and the .seg Class Defining Preparation is populated with 3, and the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters. · .csm, .segAction: Populate the .csm Container Type field with O, T, E, L, or F when the .csm Included in Other Documentation field is populated with O or L, and the .seg Class Defining Preparation is populated with 3, and the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters.Error location: .csm, .seg3931The value provided for The .csm Container Type field was {1}; it must contain V = Sack (virtual), S = Sack, 1 = #1 Sack, 2 = #2 Sack, 3 = #3 Sack, 4 = 01V Sack, or 5 = 03V Sack when the .csm Included in Other Documentation field is populated with L = Linked or new container, and the .seg Class Defining Preparation is populated with 3 = Std Mail, and the .mpu Mail Piece Unit – Processing Category is populated with FL = Flats.Populate the .csm Container Type field with V, S, 1, 2, 3, 4, or 5 when the .csm Included in Other Documentation field is populated with L, and the .seg Class Defining Preparation is populated with 3, and the Processing Category is populated with FL. · .ociAction: Populate the .csm Container Type field with V, S, 1, 2, 3, 4, or 5 when the .csm Included in Other Documentation field is populated with L, and the .seg Class Defining Preparation is populated with 3, and the Processing Category is populated with FL.Error location: .oci3932No such container with ID {1} found in original job {2} with provider code {3}.Populate the .oci Original Container ID field in the consolidator job with the same value that is populated in the .csm Container ID field of the origin job. · .ociAction: Populate the .oci Original Container ID field in the consolidator job with the same value that is populated in the .csm Container ID field of the origin job.Error location: .oci3933Display container ID of container {2} in original job {3} with provider code {4} does not match {1}.Populate the .oci Display Container ID field in the consolidator job with the same value that is populated in the origin job. · .ociAction: Populate the .oci Display Container ID field in the consolidator job with the same value that is populated in the origin job.Error location: .oci3934IM barcode label of container {2} in original job {3} with provider code {4} does not match {1}.Populate the .oci Original Label: IM Container or IM Tray Barcode field in the consolidator job with the same value that is populated in the origin job. · .ociAction: Populate the .oci Original Label: IM Container or IM Tray Barcode field in the consolidator job with the same value that is populated in the origin job.Error location: .oci3935Segment ID of container {2} in original job {3} with provider code {4} does not match {1}.Populate the .csm Segment ID field in the consolidator job with the same value that is populated in the .csm Segment ID field in the origin job. · .ociAction: Populate the .csm Segment ID field in the consolidator job with the same value that is populated in the .csm Segment ID field in the origin job.Error location: .oci3936An .oci file must be included in the job when the .csm Included In Other Documentation field is populated with L = Linked or new container.Include the .oci field in the job when the .csm Included In Other Documentation field is populated with L. · .ociAction: Include the .oci field in the job when the .csm Included In Other Documentation field is populated with L.Error location: .oci3937The .csm Container Type field contains an invalid value; it can only contain V=Sack (virtual) on a non-copalletized submission, when the .hdr Mail.dat Presentation Category is populated with P = Conventional Presort, and the .mpu Mail Piece Unit – Class is populated with 2 = Periodicals. Else, the .csm Included in Other Documentation field must be populated with O = Original container, I = Internal co-palletization indicator from the Origin Job – Original Container or L = Linked or new container.Populate the .csm Container Type field with a value other than V when the .hdr Mail.dat Presentation Category field is populated with P, and the .mpu Mail Piece Unit – Class is populated with 2. Else, the .csm Included In Other Documentation field must populated with O, I or L. . · .csmAction: Populate the .csm Container Type field with a value other than V when the .hdr Mail.dat Presentation Category field is populated with P, and the .mpu Mail Piece Unit – Class is populated with 2. Else, the .csm Included In Other Documentation field must populated with O, I or L. .Error location: .csm3938Container with ID {1} in original job {2} with provider code {3} does not have a finalized postage statement.Finalize the all postage statement associated to the Container ID before submitting the consolidator job for tray based copal mailings. · .ociAction: Finalize the all postage statement associated to the Container ID before submitting the consolidator job for tray based copal mailings.Error location: .oci3939For Full-Service Processing, the .cqt Rate Category field value provided was {1}; must contain A = Saturation - ECR, B = High Density - ECR, D = Carrier Route, E = 5 Digit Barcode, FB = Firm Bundle (Not In-County), H = 3 Digit Barcode, or L2 = MxAADC/Mixed BC when the .seg Class Defining Preparation field is populated with 2 = Periodicals, the .seg Principal Processing Category is populated with FL = Flats, and the .cqt Periodicals: Not County/In County field is populated with N = Not County.Populate the .cqt Rate Category field with A, B, D, E, FB, H, or L2 when the .seg Class Defining Preparation field is populated with 2, the .seg Principal Processing Category field is populated with FL = Flats, and the .cqt Periodicals: Not County/In County field is populated with N. · Multiple FilesAction: Populate the .cqt Rate Category field with A, B, D, E, FB, H, or L2 when the .seg Class Defining Preparation field is populated with 2, the .seg Principal Processing Category field is populated with FL = Flats, and the .cqt Periodicals: Not County/In County field is populated with N.Error location: Multiple Files3941Container with ID {1} in original job {2} with provider code {3} is already referenced by another consolidator job.Do not attempt to submit a job with containers that were previously submitted in a different consolidator job. · .ociAction: Do not attempt to submit a job with containers that were previously submitted in a different consolidator job.Error location: .oci3943The .seg Principal Processing Category {1} of container {2} in original job {3} with provider code {4} does not match the .seg Principal Processing Category {5} in the consolidator job. The value provided was {1}.Populate the .seg Principal Processing Category field in the consolidator job with the same value that was populated in the original job. · .ociAction: Populate the .seg Principal Processing Category field in the consolidator job with the same value that was populated in the original job.Error location: .oci3944The .seg Class Defining Preparation {1} of container {2} in original job {3} with provider code {4} does not match the .seg Class Defining Preparation {5} in the consolidator job. The value provided was {1}.Populate the .seg Class Defining Preparation field in the consolidator job with the same value that was populated in the original job. · .ociAction: Populate the .seg Class Defining Preparation field in the consolidator job with the same value that was populated in the original job.Error location: .oci3945The .mpu Periodical Ad % Status field contains an invalid value; it must contain N, P or F..ociError location: .oci3946The .csm Container Type {1} of container {2} in original job {3} with provider code {4} does not match the .csm Container Type {5} of container {6} in the consolidator job.Populate the .csm Container Type field with same value that is populated in the .csm Container Type field in the original job. · .ociAction: Populate the .csm Container Type field with same value that is populated in the .csm Container Type field in the original job.Error location: .oci3947The .csm Container ID {1} in original job {2} with provider code {3} does not have the .csm Included In Other Documentation field populated with O = Original Container or I = Internal co-palletization indicator from the Origin Job – Original Container. The value provided was {1}.Populate the .csm Container ID field with a value that is associated to a container with the .csm Included In Other Documentation field populated with O or I. · .ociAction: Populate the .csm Container ID field with a value that is associated to a container with the .csm Included In Other Documentation field populated with O or I.Error location: .oci3948The value provided for The .csm Container Status field was {1}; it must contain R = Ready to Pay when the parent .csm Container Status field is populated with R = Ready to Pay.Populate the .csm Container Status field with R when the parent .csm Container Status field is populated with R. · .csmAction: Populate the .csm Container Status field with R when the parent .csm Container Status field is populated with R.Error location: .csm3949The value provided for The .csm Container Status field was {1}; it must container R when the parent .csm Container Status field is populated with R=Ready to pay.Populate the .csm Container Status field with R when the parent .csm Container Status field is populated with R. · .csmAction: Populate the .csm Container Status field with R when the parent .csm Container Status field is populated with R.Error location: .csm3950When the .csm Container Type field is populated with V = Sack (Virtual) and the .csm Included In Other Documentation field is populated with O= Original Container or I = Internal co-palletization indicator from the Origin Job – Original Container, the job may not contain wasted or shorted piece data in the .pdr file.Do not attempt to submit a .pdr file with the Wasted or Shortage Piece Indicator field populated when the .csm Container Type field is populated with V and the .csm Included In Other Documentation field is populated with O or I. · .csm, ,pdrAction: Do not attempt to submit a .pdr file with the Wasted or Shortage Piece Indicator field populated when the .csm Container Type field is populated with V and the .csm Included In Other Documentation field is populated with O or I.Error location: .csm, ,pdr3951For Full-Service or Mixed Service mailings, piece data information must be included in the .pdr or .pbc file for those containers where the .csm Container Status field is populated with R=Ready to pay.Include either a .pdr or .pbc file for containers with a .csm Container Status field populated with R for Full or Mixed Service mailings. · Multiple filesAction: Include either a .pdr or .pbc file for containers with a .csm Container Status field populated with R for Full or Mixed Service mailings.Error location: Multiple files3952The .csm Actual Container Ship Date must be a valid numeric value formatted as YYYYMMDD in the .csm file (when populated).Populate the .csm Actual Container Ship Date field with a valid numeric value formatted as YYYYMMDD. · .csmAction: Populate the .csm Actual Container Ship Date field with a valid numeric value formatted as YYYYMMDD.Error location: .csm3953The .csm Parent Container Reference ID field is required when the .csm Included in Other Documentation field is populated with L = Linked or new container and the .csm Container Status field is not populated with T = Transportation Info Update, C = Cancel, D = Delete or X = Paid, and the .csm Sibling Container Reference ID field is not populated. The value was {2}.Populate the .csm Parent Container Reference ID field when the .csm Included in Other Documentation field is populated with L and the .csm Container Status is field not populated with T, C, D or X, and the .csm Sibling Container Reference ID field is not populated. · .csmAction: Populate the .csm Parent Container Reference ID field when the .csm Included in Other Documentation field is populated with L and the .csm Container Status is field not populated with T, C, D or X, and the .csm Sibling Container Reference ID field is not populated.Error location: .csm3955The .csm Container Status field value provided was {1}; it cannot contain T = Transportation Information Update, if after R = Ready To Pay or X = Previously Closed or Paid, after the co-palletization consolidator job has been submitted.Do not attempt to submit a job with a .csm Container Status field populated with T after the co-palletization consolidator job has been submitted. · Multiple FilesAction: Do not attempt to submit a job with a .csm Container Status field populated with T after the co-palletization consolidator job has been submitted.Error location: Multiple Files3962Data Formatting Error: Label: Destination Line 1 must be left justified with no leading spaces.Populate the .csm Label: Destination Line 1 field with a value that is left justified and does not include any leading spaces. · .csmAction: Populate the .csm Label: Destination Line 1 field with a value that is left justified and does not include any leading spaces.Error location: .csm3963The .cqt Number of Pieces must be equal to the .cqt Number of Copies.Populate the .cqt Number of Pieces field with the same value that is populated in the .cqt Number of Copies field. · .cqtAction: Populate the .cqt Number of Pieces field with the same value that is populated in the .cqt Number of Copies field.Error location: .cqt3964The .cqt Number of Pieces field must be populated with a value that is less than or equal to the .cqt Number of Copies field when the .cqt Rate Category field is populated with FB = Firm bundle(Not In-county).Populate the .cqt Number of Pieces field with a value that is less than or equal to the .cqt Number of Copies field when the .cqt Rate Category field is populated with FB. · .cqtAction: Populate the .cqt Number of Pieces field with a value that is less than or equal to the .cqt Number of Copies field when the .cqt Rate Category field is populated with FB.Error location: .cqt3965The .cqt Number of Pieces field must be populated with a value that is greater than or equal to the .cqt Number of Copies field when the .cpt Component – Class field is populated with 2 = Periodicals or 5 = Per Pending and the .cpt Component – Rate Type field is populated with Z = Included, part of the host postage and the .cpt Periodical Ad% Treatment field is populated with S = Carries own Ad Percentage. The value provided was {1}.Populate the .cqt Number of Pieces field with a value that is greater than or equal to the .cqt Number of Copies field when the .cpt Component – Class field is populated with 2 or 5 and the .cpt Component – Rate Type field is populated with Z and the .cpt Periodical Ad% Treatment field is populated with S. · .cqtAction: Populate the .cqt Number of Pieces field with a value that is greater than or equal to the .cqt Number of Copies field when the .cpt Component – Class field is populated with 2 or 5 and the .cpt Component – Rate Type field is populated with Z and the .cpt Periodical Ad% Treatment field is populated with S.Error location: .cqt3967For Full-Service Processing, the .csm Scheduled Ship Date field must be within 30 days of the past or present of the .csm Postage Statement Mailing Date.Populate the .csm Scheduled Ship Date field with a date that is within 30 days of the past or present of the .csm Postage Statement Mailing Date field. · .csmAction: Populate the .csm Scheduled Ship Date field with a date that is within 30 days of the past or present of the .csm Postage Statement Mailing Date field.Error location: .csm3968The .csm Postage Statement Mailing Date cannot be more than {1} days in the future of the submission date and cannot be backdated prior to {2}.Populate the .csm Postage Statement Mailing Date field with a value that is within the number of days allowed in the future of the submission date. · .csmAction: Populate the .csm Postage Statement Mailing Date field with a value that is within the number of days allowed in the future of the submission date.Error location: .csm3983The .mcr Primary MPA ID field must have an associated .mpa Postage Payment Method of P = Permit when the .cpt Component – Rate Type field is populated with I = First Class Permit Reply Mail. The value provided was {1}.Populate the .mcr Primary MPA ID field with a value with an associated .mpa Postage Payment Method of P. · .mcrAction: Populate the .mcr Primary MPA ID field with a value with an associated .mpa Postage Payment Method of P.Error location: .mcr3984The value provided for .mpa Postage Payment Method field was {1}; it must contain P = Permit or G = Gov’t – Fed (use Permit) when the .seg Class Defining Preparation field is populated with 4 = Pkg Services and .mpu Mail Piece Unit – Rate Type field is populated with B = Bound Printed Matter.Populate the .mpa Postage Payment Method field with P or G when the .seg Class Defining Preparation field is populated with 4 and .mpu Mail Piece Unit – Rate Type field is populated with B. · Multiple FilesAction: Populate the .mpa Postage Payment Method field with P or G when the .seg Class Defining Preparation field is populated with 4 and .mpu Mail Piece Unit – Rate Type field is populated with B.Error location: Multiple Files3985Required Field Missing: Scheduled Induction Date is a required field in the .csm file when Scheduled Induction Time is present.Populate the .csm Scheduled Induction Date field when the .csm Scheduled Induction Time field is populated. · .csmAction: Populate the .csm Scheduled Induction Date field when the .csm Scheduled Induction Time field is populated.Error location: .csm3986Required Field Missing: Container Ship Date is a required field in the .csm file when Container Ship Time is present..csmError location: .csm3987Required Field Missing: Container Pick Up Date is a required field in the .csm file when Container Pick Up Time is present..csmError location: .csm3988Required Field Missing: Actual Pickup Date is a required field in the .csm file when Actual Pickup Time is present.Populate the .csm Actual Pickup Date field when the .csm Actual Pick Up Time field is populated. · .csmAction: Populate the .csm Actual Pickup Date field when the .csm Actual Pick Up Time field is populated.Error location: .csm3989Required Field Missing: Actual Container Ship Date is a required field in the .csm file when Actual Container Ship Time is present.Populate the .csm Actual Container Ship Date field when the .csm Actual Container Ship Time field is populated. · .csmAction: Populate the .csm Actual Container Ship Date field when the .csm Actual Container Ship Time field is populated.Error location: .csm3992The .mpu Machinability Indicator field value provided was {1}; it must contain U = Machinable on USFM 1000,N = Not Machinable or Y = Machinable on ASFM 100 when the .mpu Mail Piece Unit – Class field is populated with 5= Per Pending and the .mpu Mail Piece Unit – Weight field is more than 16 ounces and less than or equal to 22 ounces.Populate the .mpu Machinability Indicator field with U, N, or Y when the .mpu Mail Piece Unit – Class field is populated with 5 and the .mpu Mail Piece Unit – Weight field is more than 16 ounces and less than or equal to 22 ounces. · .mpuAction: Populate the .mpu Machinability Indicator field with U, N, or Y when the .mpu Mail Piece Unit – Class field is populated with 5 and the .mpu Mail Piece Unit – Weight field is more than 16 ounces and less than or equal to 22 ounces.Error location: .mpu3993The class and processing category combination specified are not valid for full service.Populate the .mpu Mail Piece Unit – Class and .mpu Mail Piece Unit – Processing Category field with values that are valid for Full-Service mailings. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Class and .mpu Mail Piece Unit – Processing Category field with values that are valid for Full-Service mailings.Error location: Multiple Files3994The .csm Entry Point – Actual / Delivery – Locale Key specified must begin with “LOC” followed by six alphanumeric characters or contain “ORIGIN” when the .cqt Destination Entry field is populated with N=None. The value provided was {1}.Populate the .csm Entry Point – Actual / Delivery Locale Key field with “LOC” followed by 6 alphanumeric characters or “ORIGIN” when the .cqt Destination Entry field is populated with N. · .csmAction: Populate the .csm Entry Point – Actual / Delivery Locale Key field with “LOC” followed by 6 alphanumeric characters or “ORIGIN” when the .cqt Destination Entry field is populated with N.Error location: .csm3995The .csm Entry Point – Actual / Delivery – Locale Key specified must begin with “LOC” followed by six alphanumeric characters when the .cqt Destination Entry field is not populated with N = None. The value provided was {1}.Populate the .csm Entry Point – Actual / Delivery Locale Key field with “LOC” followed by 6 alphanumeric characters when the .cqt Destination Entry field is not populated with N. · .csmAction: Populate the .csm Entry Point – Actual / Delivery Locale Key field with “LOC” followed by 6 alphanumeric characters when the .cqt Destination Entry field is not populated with N.Error location: .csm3996The value provided for .mpa Postage Payment Method field was {1}; it must contain P = Permit when the .seg Detached Address Label Indicator field is populated with Y = Regular Limited Circulation.Populate the .mpa Postage Payment Method field with P when the .seg Detached Address Label Indicator field is populated with Y. · Multiple FilesAction: Populate the .mpa Postage Payment Method field with P when the .seg Detached Address Label Indicator field is populated with Y.Error location: Multiple Files4002There can be no more than 999 unique .mpa Customer Reference IDs for a single .mpa file submission.Verify that the .mpa file does not include more than 999 unique .mpa Customer Reference IDs. · .mpaAction: Verify that the .mpa file does not include more than 999 unique .mpa Customer Reference IDs.Error location: .mpa4003The .cqt records in a job cannot be updated or inserted after .csm Container Status field has been submitted with a value of R (Ready). Value provided was {1}.Do not attempt to update or insert .cqt records after the .csm Container Status field was previously submitted with a value of R. · Multiple FilesAction: Do not attempt to update or insert .cqt records after the .csm Container Status field was previously submitted with a value of R.Error location: Multiple Files4004.pqt records in a job cannot be updated or inserted after .csm Container Status field has been submitted with a value of R(Ready).Do not attempt to update or insert .pqt records after the .csm Container Status field was previously submitted with a value of R. · Multiple FilesAction: Do not attempt to update or insert .pqt records after the .csm Container Status field was previously submitted with a value of R.Error location: Multiple Files4005The .mpa Postage Payment Method must be populated with T when the .cpt Component Class is set to 5..mpaError location: .mpa4006The .mpa Postage Payment Method must be set to P, S, M, L, or C when the .cqt Rate Category is S and .hdr Presentation Category is set to M.Populate the .mpa Postage Payment Method with P, S, M, L, or C. · Multiple FilesAction: Populate the .mpa Postage Payment Method with P, S, M, L, or C.Error location: Multiple Files4007The value provided for the .csm Container Level field was {1}; it must contain AN=Single Piece CSA FCM Only or AJ=Single Piece when the .cqt Rate Category field is populated with S=Single Piece and the .hdr Mail.dat Presentation Category field is populated with M=MLOCR.Populate the .csm Container Level field with AN or AJ when the .cqt Rate Category field is populated with S and the .hdr Presentation Category field is populated with M. · Multiple FilesAction: Populate the .csm Container Level field with AN or AJ when the .cqt Rate Category field is populated with S and the .hdr Presentation Category field is populated with M.Error location: Multiple Files4008The value provided for The .csm Container Level field was {1}; it must contain AJ = Single Piece when the .cqt Rate Category field is populated with S = Single Piece and the .hdr Mail.dat Presentation Category field is populated with M = MLOCR.Populate the .csm Container Level field with AJ when the .cqt Rate Category field is populated with S and the .hdr Presentation Category field is populated with M. · Multiple FilesAction: Populate the .csm Container Level field with AJ when the .cqt Rate Category field is populated with S and the .hdr Presentation Category field is populated with M.Error location: Multiple Files4009The value provided for The Container Type field was {1}; it must contain V=Sack (virtual), S=Sack, 1=#1 Sack, 2=#2 Sack, 3=#3 Sack, 4=01V Sack, or 5=03V Sack when the .csm Included in Other Documentation field is populated with O, the .seg Class Defining Preparation field is populated with 2=Periodicals, and the .seg Principal Processing Category field is populated with FL=Flat.Populate the .csm Container Type field with V, S, 1, 2, 3, 4, or 5 when the .csm Included in Other Documentation field is populated with O, the .seg Class Defining Preparation field is populated with 2, and the .seg Principal Processing Category field is populated with FL = Flats. · Multiple FilesAction: Populate the .csm Container Type field with V, S, 1, 2, 3, 4, or 5 when the .csm Included in Other Documentation field is populated with O, the .seg Class Defining Preparation field is populated with 2, and the .seg Principal Processing Category field is populated with FL = Flats.Error location: Multiple Files4011For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M = MLOCR, .mpu Mail Piece Unit - Class is set to 1= First Class, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to E= 5 Digit Barcode, the .cqt Rate Category can only be changed to H = 3 Digit Barcode or L2= MxAADC/Mixed BC. The value provided was {1}.In an update submission, populate the .cqt Rate Category field with H or L2 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 1, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to E. · Multiple FilesAction: In an update submission, populate the .cqt Rate Category field with H or L2 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 1, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to E.Error location: Multiple Files4012For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M = MLOCR, .mpu Mail Piece Unit - Class is set to 1= First Class, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to H= 3 Digit Barcode, the .cqt Rate Category can only be changed to L2= MxAADC/Mixed BC. The value provided was {1}.In an update submission, populate the .cqt Rate Category field with L2 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 1, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to H. · Multiple FilesAction: In an update submission, populate the .cqt Rate Category field with L2 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 1, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to H.Error location: Multiple Files4014For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M=MLOCR, .mpu Mail Piece Unit - Class is set to 1= First Class, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to L2=MxAADC/Mixed BC, the .cqt Rate Category cannot be changed. The value provided was {1}.In an update submission, populate the .cqt Rate Category field with L2 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 1, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to L2, the .cqt Rate Category cannot be changed. · Multiple FilesAction: In an update submission, populate the .cqt Rate Category field with L2 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 1, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to L2, the .cqt Rate Category cannot be changed.Error location: Multiple Files4015For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M=MLOCR, .mpu Mail Piece Unit - Class is set to 1= First Class, .mpu Mail Piece Unit - Processing Category is set to FL=Flat, and the .cqt Rate Category is currently set to E= 5 Digit Barcode, the .cqt Rate Category can only be changed to H= 3 Digit Barcode or L2= MxAADC/Mixed BC. The value provided was {1}.In an update submission, populate the .cqt Rate Category field with H or L2 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 1, .mpu Mail Piece Unit - Processing Category is set to FL, and the .cqt Rate Category is currently set to E. · Multiple FilesAction: In an update submission, populate the .cqt Rate Category field with H or L2 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 1, .mpu Mail Piece Unit - Processing Category is set to FL, and the .cqt Rate Category is currently set to E.Error location: Multiple Files4016For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 1, .mpu Mail Piece Unit - Processing Category is set to FL, and the .cqt Rate Category is currently set to H, the .cqt Rate Category can only be changed to L2.In an update submission, populate the .cqt Rate Category field with L2 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 1, .mpu Mail Piece Unit - Processing Category is set to FL, and the .cqt Rate Category is currently set to H. · Multiple FilesAction: In an update submission, populate the .cqt Rate Category field with L2 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 1, .mpu Mail Piece Unit - Processing Category is set to FL, and the .cqt Rate Category is currently set to H.Error location: Multiple Files4018For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M=MLOCR, .mpu Mail Piece Unit – Class is set to 1, .mpu Mail Piece Unit – Processing Category is set to FL=Flats, and the .cqt Rate Category is currently set to L4= MxADC BC, the .cqt Rate Category cannot be changed. The value provided was {1}.Do not attempt to update the .cqt Rate Category field when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit – Class is set to 1, .mpu Mail Piece Unit – Processing Category is set to FL, and the .cqt Rate Category is currently set to L4. · Multiple FilesAction: Do not attempt to update the .cqt Rate Category field when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit – Class is set to 1, .mpu Mail Piece Unit – Processing Category is set to FL, and the .cqt Rate Category is currently set to L4.Error location: Multiple Files4019For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M= MLOCR, .mpu Mail Piece Unit - Class is set to 3=std mail, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to E= 5 Digit Barcode, the .cqt Rate Category can only be changed to L2= MxAADC/Mixed BC, L7 = AADC/3D Machinable, L8= MxAADC/Mixed Machinable, G= 5 Digit, H = 3 Digit Barcode, K= 3 Digit, or L6= MxADC/Mixed. The value provided was {1}.In an update submission, populate the .cqt Rate Category field with L2, L7, L8, G, H, K, or L6 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 3, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to E. · Multiple FilesAction: In an update submission, populate the .cqt Rate Category field with L2, L7, L8, G, H, K, or L6 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 3, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to E.Error location: Multiple Files4020For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M= MLOCR, .mpu Mail Piece Unit - Class is set to 3=std mail, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to H= 3 Digit Barcode, the .cqt Rate Category can only be changed to L2, L7, L8, G, K, or L6.In an update submission, populate the .cqt Rate Category field with L2, L7, L8, G, K, or L6 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 3, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to H. · Multiple FilesAction: In an update submission, populate the .cqt Rate Category field with L2, L7, L8, G, K, or L6 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 3, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to H.Error location: Multiple Files4022In an update submission, populate the .cqt Rate Category field with L8= MxAADC/Mixed Machinable, G= 5 Digit, K= 3 Digit, or L6 = MxADC/Mixed when the .hdr Presentation Category is set to M= MLOCR, .mpu Mail Piece Unit - Class is set to 3=std mail, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to L7= AADC/3D Machinable.In an update submission, populate the .cqt Rate Category field with L8, G, K, or L6 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 3, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to L7. · Multiple FilesAction: In an update submission, populate the .cqt Rate Category field with L8, G, K, or L6 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 3, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to L7.Error location: Multiple Files4023For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M= MLOCR, .mpu Mail Piece Unit - Class is set to 3=std mail, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to L2= MxAADC/Mixed BC, the .cqt Rate Category can only be changed to L8= MxAADC/Mixed Machinable, G= 5 Digit, K= 3 Digit, or L6= MxADC/Mixed.In an update submission, populate the .cqt Rate Category field with L8, G, K, or L6 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 3, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to L2. · Multiple FilesAction: In an update submission, populate the .cqt Rate Category field with L8, G, K, or L6 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 3, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to L2.Error location: Multiple Files4024For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M= MLOCR, .mpu Mail Piece Unit - Class is set to 3=std mail, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to L8= MxAADC, the .cqt Rate Category can only be changed to G= 5 Digit, K= 3 Digit, or L6= MxADC/Mixed.In an update submission, populate the .cqt Rate Category field with G, K, or L6 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 3, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to L8. · Multiple FilesAction: In an update submission, populate the .cqt Rate Category field with G, K, or L6 when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit - Class is set to 3, .mpu Mail Piece Unit - Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to L8.Error location: Multiple Files4029For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M= MLOCR, .mpu Mail Piece Unit – Class is set to 3= Std Mail, .mpu Mail Piece Unit – Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to A= Saturation – ECR, the .cqt Rate Category can only be changed to B= High Density – ECR or D= Carrier Route. The value provided was {1}.In an update submission, populate the .cqt Rate Category field with B or D when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit – Class is set to 3, .mpu Mail Piece Unit – Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to A. · Multiple FilesAction: In an update submission, populate the .cqt Rate Category field with B or D when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit – Class is set to 3, .mpu Mail Piece Unit – Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to A.Error location: Multiple Files4030For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M=Metered, .mpu Mail Piece Unit – Class is set to 3= Std Mail, .mpu Mail Piece Unit – Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to B= High Density – ECR, the .cqt Rate Category can only be changed to D= Carrier Route.In an update submission, populate the .cqt Rate Category field with D when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit – Class is set to 3, .mpu Mail Piece Unit – Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to B. · Multiple FilesAction: In an update submission, populate the .cqt Rate Category field with D when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit – Class is set to 3, .mpu Mail Piece Unit – Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to B.Error location: Multiple Files4031For MLOCR Mailings, the discounts cannot be changed to a greater discount by changing the .cqt Rate Category in an update submission. When .hdr Presentation Category is set to M = Metered: Neither, .mpu Mail Piece Unit – Class is set to 3= Std Mail, .mpu Mail Piece Unit – Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to D= Carrier Route, the .cqt Rate Category cannot be changed. The value provided was {}Do not attempt to update the .cqt Rate Category field when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit – Class is set to 3, .mpu Mail Piece Unit – Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to D. · Multiple FilesAction: Do not attempt to update the .cqt Rate Category field when the .hdr Presentation Category is set to M, .mpu Mail Piece Unit – Class is set to 3, .mpu Mail Piece Unit – Processing Category is set to LT = Letters, and the .cqt Rate Category is currently set to D.Error location: Multiple Files4035The .csm Container Type {1} of container {2} in original job {3} with provider code {4} must be populated with V = Sack (Virtual), S = Sack (general), 1 = #1 Sack, 2 = #2 Sack, 3 = #3 Sack, 4 = 01V Sack, or 5 = 03V Sack for Bundle-Based Consolidator Jobs. The value provided was {5}.Populate the .csm Container Type field with V, S, 1, 2, 3, 4, or 5 for Bundle-Based Consolidator jobs. · Multiple FilesAction: Populate the .csm Container Type field with V, S, 1, 2, 3, 4, or 5 for Bundle-Based Consolidator jobs.Error location: Multiple Files4036For Full-Service Processing, when the .csm Container Status field is populated with R = Ready to pay; it must contain a .pdr or .pbc file for an update job.Include the .pdr or .pbc file when the .csm Container Status field is populated with R for Full-Service mailings. · Multiple FilesAction: Include the .pdr or .pbc file when the .csm Container Status field is populated with R for Full-Service mailings.Error location: Multiple Files4037The postage statement for this job has been frozen. Once a postage statement is frozen, containers or submissions within that postage statement cannot be canceled, deleted, or updated.Do not attempt to cancel, delete, or update a container or submission that is associated to a postage statement that has been frozen. · UpdatesAction: Do not attempt to cancel, delete, or update a container or submission that is associated to a postage statement that has been frozen.Error location: Updates4038.seg records cannot be inserted or updated in a job after the .csm Container Status field was populated with R = Ready to pay in the original job submission. The value provided was {1}.Do not attempt to update or insert .seg records to a job that was previously submitted with a .csm Container Status field value of R. · Multiple FilesAction: Do not attempt to update or insert .seg records to a job that was previously submitted with a .csm Container Status field value of R.Error location: Multiple Files4039An .mpa file is required for tray based copal consolidator jobs.Include the .mpa file for tray based copal consolidator mailings. · Multiple FilesAction: Include the .mpa file for tray based copal consolidator mailings.Error location: Multiple Files4041The .csm Included In Other Documentation field must be blank for all Physical Sibling Containers when the .csm Sibling Container Indicator field is populated with Y = Yes.Do not populate the .csm Included In Other Documentation field when the .csm Sibling Container Indicator field is populated with Y. · Multiple FilesAction: Do not populate the .csm Included In Other Documentation field when the .csm Sibling Container Indicator field is populated with Y.Error location: Multiple Files4042All .mpa Permit ZIP+4 and .mpa CRID of Preparer must be the same for tray based copal consolidator jobs.Populate all .mpa Permit ZIP+4 and .mpa CRID of Preparer with the same value for tray based copal consolidator jobs. · Multiple FilesAction: Populate all .mpa Permit ZIP+4 and .mpa CRID of Preparer with the same value for tray based copal consolidator jobs.Error location: Multiple Files4044The .csm Postage Statement Mailing Date field values cannot span the price change date; within a job these dates must either be all before or all after {1}.Populate the .csm Postage Statement Mailing Date field with value that does not span the current price change date. · .csmAction: Populate the .csm Postage Statement Mailing Date field with value that does not span the current price change date.Error location: .csm4045Alphanumeric Data Type Error: Postal Price Incentive Type must be an alphanumeric value in the .cpt file when populated.Populate the .cpt Postal Price Incentive Type field with an alphanumeric value when populated. · .cptAction: Populate the .cpt Postal Price Incentive Type field with an alphanumeric value when populated.Error location: .cpt4047The .mpu Mail Piece Unit – Weight field must be populated with a value that is less than or equal to 3.5 oz. when the .mpu Mail Piece Unit – Class field is populated with 1 = First Class, the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters or CD = Cards when the .cqt Rate Category field is populated with L = Basic Barcode N = Presort (1C, 4C) S = Single Piece, and the .hdr Mail.dat Presentation Category is not populated with N = Single Piece. The value provided was {1}.Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 3.5 oz. when the .mpu Mail Piece Unit – Class field is populated with 1, the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters or CD = Cards when the .cqt Rate Category field is populated with L, N, or S, and the .hdr Mail.dat Presentation Category is not populated with N. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 3.5 oz. when the .mpu Mail Piece Unit – Class field is populated with 1, the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters or CD = Cards when the .cqt Rate Category field is populated with L, N, or S, and the .hdr Mail.dat Presentation Category is not populated with N.Error location: Multiple Files4048The .mpu Mail Piece Unit – Weight field must be populated with a value that is less than or equal to 3.5 oz when the .mpu Mail Piece Unit – Class field is populated with 1=First Class and the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters. The value provided was {1}.Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 3.5 oz when the .mpu Mail Piece Unit – Class field is populated with 1 and the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 3.5 oz when the .mpu Mail Piece Unit – Class field is populated with 1 and the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters.Error location: Multiple Files4049The .mpu Mail Piece Unit – Weight field must be populated with a value that is less than or equal to 13 oz. when the .mpu Mail Piece Unit – Class field is populated with 1 = First Class, the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats, and the .hdr Mail.dat Presentation Category is not populated with N = Single Piece. The value provided was {1}.Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 13 oz. when the .mpu Mail Piece Unit – Class field is populated with 1, the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats, and the .hdr Mail.dat Presentation Category is not populated with N = Single Piece. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 13 oz. when the .mpu Mail Piece Unit – Class field is populated with 1, the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats, and the .hdr Mail.dat Presentation Category is not populated with N = Single Piece.Error location: Multiple Files4057The .mpu Mail Piece Unit – Weight field must be populated with a value that is less than 16 oz when the .mpu Mail Piece Unit – Class field is populated with 3 = Std Mail and the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters. The value provided was {1}.Populate the .mpu Mail Piece Unit – Weight field with a value that is less than 16 oz when the .mpu Mail Piece Unit – Class field is populated with 3 and the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Weight field with a value that is less than 16 oz when the .mpu Mail Piece Unit – Class field is populated with 3 and the .mpu Mail Piece Unit – Processing Category field is populated with LT = Letters.Error location: Multiple Files4058The .mpu Mail Piece Unit - Weight field must be populated with a value that is less than or equal to 15 lbs when the .mpu Mail Piece Unit - Class field is populated with 3 = Std Mail and the .mpu Mail Piece Unit - Processing Category field is populated with FL = Flats. The value provided was {1}.Populate the .mpu Mail Piece Unit - Weight field with a value that is less than or equal to 15 lbs when the .mpu Mail Piece Unit - Class field is populated with 3 and the .mpu Mail Piece Unit - Processing Category field is populated with FL = Flats. · Multiple FilesAction: Populate the .mpu Mail Piece Unit - Weight field with a value that is less than or equal to 15 lbs when the .mpu Mail Piece Unit - Class field is populated with 3 and the .mpu Mail Piece Unit - Processing Category field is populated with FL = Flats.Error location: Multiple Files4062The .mpu Mail Piece Unit - Weight field must be populated with a value that is less than or equal to 20 oz when the .mpu Mail Piece Unit - Class field is populated with 4 = Pkg Services, the .mpu Mail Piece Unit - Rate Type field is populated with B = Bound Printed Matter, and the .mpu Mail Piece Unit - Processing Category field is populated with FL = Flats, and the job contains a barcode. The value provided was {1}.Populate the .mpu Mail Piece Unit - Weight field with a value that is less than or equal to 20 oz when the .mpu Mail Piece Unit - Class field is populated with 4, the .mpu Mail Piece Unit - Rate Type field is populated with B, and the .mpu Mail Piece Unit - Processing Category field is populated with FL = Flats, and the job contains a barcode. · .mpuAction: Populate the .mpu Mail Piece Unit - Weight field with a value that is less than or equal to 20 oz when the .mpu Mail Piece Unit - Class field is populated with 4, the .mpu Mail Piece Unit - Rate Type field is populated with B, and the .mpu Mail Piece Unit - Processing Category field is populated with FL = Flats, and the job contains a barcode.Error location: .mpu4063The .cpt Component – Weight field must be populated with a value that is less than or equal to 16 oz. when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals or 5 = Per Pending. The value provided was {1}.Populate the .cpt Component – Weight field with a value that is less than or equal to 16 oz. when the .mpu Mail Piece Unit – Class field is populated with 2 or 5. · Multiple FilesAction: Populate the .cpt Component – Weight field with a value that is less than or equal to 16 oz. when the .mpu Mail Piece Unit – Class field is populated with 2 or 5.Error location: Multiple Files4064Populate the .cpt Component – Weight field with a value that is less than or equal to 22 oz. when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals or 5 = Per Pending, the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats and the .mpu Machinability Indicator field is populated with Y = Machinable on ASFM 100.Populate the .cpt Component – Weight field with a value that is less than or equal to 22 oz. when the .mpu Mail Piece Unit – Class field is populated with 2 or 5, the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats and the .mpu Machinability Indicator field is populated with Y. · Multiple FilesAction: Populate the .cpt Component – Weight field with a value that is less than or equal to 22 oz. when the .mpu Mail Piece Unit – Class field is populated with 2 or 5, the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats and the .mpu Machinability Indicator field is populated with Y.Error location: Multiple Files4067Alphanumeric Data Type Error: .mpu Standard Parcel Type must be an alphanumeric value in the .mpu file (when populated).Populate the .mpu Standard Parcel Type with an alphanumeric value (when populated). · .mpuAction: Populate the .mpu Standard Parcel Type with an alphanumeric value (when populated).Error location: .mpu4071The value provided for The .csm Container Type was {1}; .csm Container Type AB = Air Box is not supported, when the .mpu Mail Piece Unit – Class is not populated with 2 = Periodicals or 5 = Per Pending.Populate the .csm Container Type field with a value other than AB. · .csmAction: Populate the .csm Container Type field with a value other than AB.Error location: .csm4074The .cpt Periodical Issue Date field must be populated when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals. The value provided was {1}.Populate the .cpt Periodical Issue Date field when the .mpu Mail Piece Unit – Class field is populated with 2. · .cptAction: Populate the .cpt Periodical Issue Date field when the .mpu Mail Piece Unit – Class field is populated with 2.Error location: .cpt4080The Origin Job Id – {1} and Origin User License Code – {2} combination does not exist.Verify that the .oci Original Job ID and Original User License Code fields are populated with values that were submitted in the original mailings. · .ociAction: Verify that the .oci Original Job ID and Original User License Code fields are populated with values that were submitted in the original mailings.Error location: .oci4083The .mcr Host Statement Component ID is required when a Mail Piece Unit ID is associated to multiple Component IDs within the .mcr file.Populate the .mcr Host Statement Component ID field when a Mail Piece Unit ID is associated to multiple Component IDs within the .mcr file. · Multiple FilesAction: Populate the .mcr Host Statement Component ID field when a Mail Piece Unit ID is associated to multiple Component IDs within the .mcr file.Error location: Multiple Files4084The .mpu Mail Piece Unit - Weight field must be populated with a value that is less than or equal to 3.5 oz when the .mpu Mail Piece Unit - Class field is populated with 3 = Std Mail, the .mpu Mail Piece Unit - Processing Category field is populated with LT = Letter, and the .cqt Rate Category field is populated with A = Saturation - ECR, B = High Density - ECR, or C = High Density Plus - ECR.Populate the .mpu Mail Piece Unit - Weight field with a value that is less than or equal to 3.5 oz when the .mpu Mail Piece Unit - Class field is populated with 3, the .mpu Mail Piece Unit - Processing Category field is populated with LT, and the .cqt Rate Category field is populated with A, B, or C. · Multiple FilesAction: Populate the .mpu Mail Piece Unit - Weight field with a value that is less than or equal to 3.5 oz when the .mpu Mail Piece Unit - Class field is populated with 3, the .mpu Mail Piece Unit - Processing Category field is populated with LT, and the .cqt Rate Category field is populated with A, B, or C.Error location: Multiple Files4085A .par file may not be submitted when the Wasted or Shortage Piece Indicator in the pdr file is set to W or S.Verify that the .par file is not included in a mailing when the .pdr Wasted or Shortage Piece Indicator field is populated with W or S. · Multiple FilesAction: Verify that the .par file is not included in a mailing when the .pdr Wasted or Shortage Piece Indicator field is populated with W or S.Error location: Multiple Files4086Date Data Type Error: Delivery Statistics File Date must be a valid date value formatted as YYYYMMDD in the .seg file.Populate the .seg Delivery Statistics File Date field with a valid date value formatted as YYYYMMDD. · .segAction: Populate the .seg Delivery Statistics File Date field with a valid date value formatted as YYYYMMDD.Error location: .seg4093The value provided for the .mpa Postage Payment Method field was {1}; it cannot contain L=metered for a non-identical weight mailing.Populate the .mpa Postage Payment Method field with a value other than L for a non-identical weight mailing. · Multiple FilesAction: Populate the .mpa Postage Payment Method field with a value other than L for a non-identical weight mailing.Error location: Multiple Files4094The .mpu Mail Piece Unit – Class contains an invalid value; it must be set to 1 or 3 for a co-palletized mailing when the .mpu Mail Piece Unit – Processing Category field is set to Flats and .csm Container Type set to ‘F’.Populate the .mpu Mail Piece Unit – Class with 1 or 3. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Class with 1 or 3.Error location: Multiple Files4098Alphanumeric Data Type Error: The .pbc Job ID field must be populated with an alphanumeric value.Populate the .pbc Job ID field with an alphanumeric value. · .pbcAction: Populate the .pbc Job ID field with an alphanumeric value.Error location: .pbc4099Referential Integrity Error: The .pbc Job ID field does not match the .hdr Job ID.Populate the .pbc Job ID field with a value that matches the .hdr Job ID field. · .pbcAction: Populate the .pbc Job ID field with a value that matches the .hdr Job ID field.Error location: .pbc4100Numeric Data Type Error: The .pbc PBC Unique ID field must be populated with a numeric value.Populate the .pbc PBC Unique ID field with a numeric value. · .pbcAction: Populate the .pbc PBC Unique ID field with a numeric value.Error location: .pbc4101Numeric Data Type Error: The .pbc CQT Database ID field must be populated with a numeric value.Populate the .pbc CQT Database ID field with a numeric value. · .pbcAction: Populate the .pbc CQT Database ID field with a numeric value.Error location: .pbc4102Referential Integrity Error: The .pbc CQT Database ID does not have a corresponding .cqt CQT Database ID.Populate the .pbc CQT Database ID field with a value that matches the .cqt CQT Database ID field. · .pbcAction: Populate the .pbc CQT Database ID field with a value that matches the .cqt CQT Database ID field.Error location: .pbc4105Alphanumeric Data Type Error: The .pbc Package ID field must be populated with an alphanumeric value.Populate the .pbc Package ID field with an alphanumeric value. · .pbcAction: Populate the .pbc Package ID field with an alphanumeric value.Error location: .pbc4108Numeric Data Type Error: The .pbc Barcode field must be populated with a numeric value when populated.Populate the .pbc Barcode field with a numeric value. · .pbcAction: Populate the .pbc Barcode field with a numeric value.Error location: .pbc4109The .pbc Barcode field value provided was {1}; it must contain X when the associated .cqt Service Level Indicator field is not populated with F (Full Service).Populate the .pbc Barcode field with X when the associated .cqt Service Level Indicator field is not populated with F. · .pbcAction: Populate the .pbc Barcode field with X when the associated .cqt Service Level Indicator field is not populated with F.Error location: .pbc4110The .pbc Barcode field must be populated with 31 characters when the associated .cqt Service Level Indicator field is populated with F (Full Service).Populate the .pbc Barcode field with 31 characters when the associated .cqt Service Level Indicator field is populated with F. · .pbcAction: Populate the .pbc Barcode field with 31 characters when the associated .cqt Service Level Indicator field is populated with F.Error location: .pbc4111The .pbc Wasted or Shortage Piece Indicator field value provided was {1}; it must contain W = Wasted piece produced but was spoiled, S = Shortage – piece NOT produced, X = Wasted piece and postage adjustment should NOT be triggered, or T = Shortage piece.Populate the .pbc Wasted or Shortage Piece Indicator field with W, S, X, or T when populated. · .pbcAction: Populate the .pbc Wasted or Shortage Piece Indicator field with W, S, X, or T when populated.Error location: .pbc4112The .pbc PBC Record Status field value provided was {1}; it must contain O = Original, D = Delete, I = Insert, U = Update.Populate the .pbc PBC Record Status field with O, I, or U. · .pbcAction: Populate the .pbc PBC Record Status field with O, I, or U.Error location: .pbc4113The .pbc Closing Character value provided was {1}; it must contain # sign.Populate the .pbc Closing Character field with #. · .pbcAction: Populate the .pbc Closing Character field with #.Error location: .pbc4114There can be no characters after the .pbc Closing Character field.Remove all characters after the .pbc Closing Character field. · .pbcAction: Remove all characters after the .pbc Closing Character field.Error location: .pbc4115Referential Integrity Error: There cannot be duplicate primary keys in the .pbc file (Job ID, Record Serial Number).Verify that the .pbc Job ID and .pbc PBC Unique ID fields are populated with unique values for each .pbc record. · .pbcAction: Verify that the .pbc Job ID and .pbc PBC Unique ID fields are populated with unique values for each .pbc record.Error location: .pbc4116The number of piece record detail in the .pbc file must equal a total between the Number of Pieces and Number of Copies fields in the summary .csm record when .seg Full-Service Participation Indicator field is populated with F=Full Service Option or M = Mixed (Basic and Full Mixed), and the .csm Container Status field is populated with R=Ready to pay.Verify the number of .pbc records is equal to a count between Number of Pieces and Number of Copies fields in the .csm file for the corresponding .cqt CQT Database ID when the Full-Service Participation Indicator field in the .seg file is populated with F or M, and the Container Status field in the .csm file is populated with R. · .pbcAction: Verify the number of .pbc records is equal to a count between Number of Pieces and Number of Copies fields in the .csm file for the corresponding .cqt CQT Database ID when the Full-Service Participation Indicator field in the .seg file is populated with F or M, and the Container Status field in the .csm file is populated with R.Error location: .pbc4117The .cqt CQT Record Status field value provided was {1}; it must contain U to update or insert records in the .pbc file.Populate the .cqt CQT Record Status field with U when updating or inserting records into the .pbc file. · .pbcAction: Populate the .cqt CQT Record Status field with U when updating or inserting records into the .pbc file.Error location: .pbc4119A .pdr file cannot be included once a Mail.dat job is submitted with a .pbc file.Do not attempt to submit a .pdr file in a mailing that was previously submitted with a .pbc file. · .pbcAction: Do not attempt to submit a .pdr file in a mailing that was previously submitted with a .pbc file.Error location: .pbc4120The value provided for The .csm Container Status field was {1}; it must container R = Ready to pay for the insertion of .pbc records.Populate the .csm Container Status field with R when inserting .pbc records into a job. · .pbcAction: Populate the .csm Container Status field with R when inserting .pbc records into a job.Error location: .pbc4122The value provided for The .csm Entry Point for Entry Discount – Facility Type field was {1}; it cannot contain N = Not-determined when the .csm Container Status field is populated with R = Ready to pay and .seg Full-Service Participation Indicator field is populated with F = Full Service Option or M = Mixed (Basic and Full Mixed).Populate the .csm Entry Point for Entry Discount – Facility Type field with a value other than N when the .csm Container Status field is populated with R and .seg Full-Service Participation Indicator field is populated with F or M. · Multiple FilesAction: Populate the .csm Entry Point for Entry Discount – Facility Type field with a value other than N when the .csm Container Status field is populated with R and .seg Full-Service Participation Indicator field is populated with F or M.Error location: Multiple Files4123If populated, the .seg CSA Agreement ID must be populated with a 10 digit numeric value between 1000000000 and 9999999999 when the .csm Container Status is R and .seg Full-Service Participation Indicator is F or M.Multiple FilesError location: Multiple Files4127If populated, the .csm Reservation Number field must be populated with (1) a 10 digit value with the format nnnnn + R + mmdd (where n = numeric and mmdd = date of recurring appointment); (2) a 6 character value with the format nnnnn + R; or (3) a 9 digit numeric value between 100000000 and 999999999, when the .csm Container Status field is populated with R = Ready to pay and the .seg Full-Service Participation Indicator field is populated with F = Full Service Option or M = Mixed (Basic and Full Mixed).Populate the .csm Reservation Number field with (1) a 10 digit value with the format nnnnn + R + mmdd (where n = numeric and mmdd = date of recurring appointment); (2) a 6 character value with the format nnnnn + R; or (3) a 9 digit numeric value between 100000000 and 999999999, when the .csm Container Status field is populated with R and the .seg Full-Service Participation Indicator field is populated with F or M when populated. · Multiple FilesAction: Populate the .csm Reservation Number field with (1) a 10 digit value with the format nnnnn + R + mmdd (where n = numeric and mmdd = date of recurring appointment); (2) a 6 character value with the format nnnnn + R; or (3) a 9 digit numeric value between 100000000 and 999999999, when the .csm Container Status field is populated with R and the .seg Full-Service Participation Indicator field is populated with F or M when populated.Error location: Multiple Files4130If populated, the .csm Reservation Number field must be populated with (1) a 10 digit value with the format nnnnn + R + mmdd (where n = numeric and mmdd = date of recurring appointment); (2) a 6 character value with the format nnnnn + R; or (3) a 9 digit numeric value between 100000000 and 999999999, when the .csm Container Status field is populated with T = Transportation Information Update and the .seg Full-Service Participation Indicator field is populated with F = Full Service Option or M = Mixed (Basic and Full Mixed).Populate the .csm Reservation Number field with (1) a 10 digit value with the format nnnnn + R + mmdd (where n = numeric and mmdd = date of recurring appointment); (2) a 6 character value with the format nnnnn + R; or (3) a 9 digit numeric value between 100000000 and 999999999, when the .csm Container Status field is populated with T and the .seg Full-Service Participation Indicator field is populated with F or M when populated. · Multiple FilesAction: Populate the .csm Reservation Number field with (1) a 10 digit value with the format nnnnn + R + mmdd (where n = numeric and mmdd = date of recurring appointment); (2) a 6 character value with the format nnnnn + R; or (3) a 9 digit numeric value between 100000000 and 999999999, when the .csm Container Status field is populated with T and the .seg Full-Service Participation Indicator field is populated with F or M when populated.Error location: Multiple Files4131The .mpu Mail Piece Unit – Processing Category field value provided was {1}; it must contain FL = Flat when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpu Mail Piece Unit – Processing Category field with FL = Flats when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Processing Category field with FL = Flats when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4132The .mpu MPU Surcharge field value provided was {1} ; it must contain N = Not Oversized when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpu MPU Surcharge field with N when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpu MPU Surcharge field with N when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4133The .mpu Machinability Indicator field contains an invalid value; it must contain Y = Machinable on ASFM 100 when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals or 5 = Per Pending and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpu Machinability Indicator field with Y when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpu Machinability Indicator field with Y when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4134The .mpu Postage Affixed Type field must be blank when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings. The value provided was {1}.Verify that the .mpu Postage Affixed Type field is not populated when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Verify that the .mpu Postage Affixed Type field is not populated when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4135The .mpa USPS Publication Number field must be populated when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpa USPS Publication Number field when the .mpu Mail Piece Unit – Class field is populated with 2 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpa USPS Publication Number field when the .mpu Mail Piece Unit – Class field is populated with 2 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4136The .mpa Permit Number field must be populated when the .mpu Mail Piece Unit – Class field is populated with 3 = Std Mail, 4 = Pkg Services, or 5 = Per Pending and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings . The value provided was {1}.Populate the .mpa Permit Number field when the .mpu Mail Piece Unit – Class field is populated with 3, 4, or 5 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpa Permit Number field when the .mpu Mail Piece Unit – Class field is populated with 3, 4, or 5 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4137The value provided for the .mpa Postage Payment Option field was {1}; it must contain C = CPP, V = PVDS, T = EPS, or D = Debit when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpa Postage Payment Option field with V, C, T, or D when the .mpu Mail Piece Unit – Class field is populated with 2 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpa Postage Payment Option field with V, C, T, or D when the .mpu Mail Piece Unit – Class field is populated with 2 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4138The value provided for the .mpa Postage Payment Option field was {1}; it must contain V = PVDS, T = EPS, or D = Debit for when the .mpu Mail Piece Unit – Class field is populated with 3 = Std Mail and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpa Postage Payment Option field with V, T or D when the .mpu Mail Piece Unit – Class field is populated with 3 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpa Postage Payment Option field with V, T or D when the .mpu Mail Piece Unit – Class field is populated with 3 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4139The value provided for the .mpa Postage Payment Option field was {1}; it must contain D = Debit or V = PVDS when the .mpu Mail Piece Unit – Class field is populated with 5 = Per Pending and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpa Postage Payment Option field with D or V when the .mpu Mail Piece Unit – Class field is populated with 5 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpa Postage Payment Option field with D or V when the .mpu Mail Piece Unit – Class field is populated with 5 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4140The value provided for the .mpa Postage Payment Method field was {1}; it must contain P = Permit T = Per Pend (using Permit) or G = Gov’t – Fed (use Permit) when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpa Postage Payment Method field with P,T, or G when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpa Postage Payment Method field with P,T, or G when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4141The .cpt Component – Periodical Ad Percentage field must be populated with a valid value or 0 for the host component when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals or 5 = Per Pending and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings. The value provided was {1}.Populate the .cpt Component – Periodical Ad Percentage field with a valid value or 0 for the host component when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cpt Component – Periodical Ad Percentage field with a valid value or 0 for the host component when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4142The value provided for the .cpt Component – Class field was {1}; it must contain 1 = First Class, 2 = Periodicals, 3 = Std Mail, 4 = Pkg Services, or 5 = Per Pending when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .cpt Component – Class field with 1, 2, 3, 4 or 5 when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cpt Component – Class field with 1, 2, 3, 4 or 5 when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4143The value provided for the .cpt Component – Rate Type field was {1}; it must contain R = Regular (US/MEX/CAN), N = Nonprofit, M = Repositionable Component, or Z – Included, part of host postage when the .mpu Mail Piece Unit – Class field is populated with 3 = Std Mail and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .cpt Component – Rate Type field with R, N, M, or Z when the .mpu Mail Piece Unit – Class field is populated with 3 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cpt Component – Rate Type field with R, N, M, or Z when the .mpu Mail Piece Unit – Class field is populated with 3 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4144The value provided for the .cpt Component – Rate Type field was {1}; it must contain R = Regular (US/MEX/CAN), N = Nonprofit, S = Science of Agriculture, C = Classroom, W = Science of Agriculture Limited Circulation, Y = Regular Limited Circulation, H = Per Ride-Along, Z – Included, part of host postage or M = Repositionable Component when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .cpt Component – Rate Type field with R, N, S, C, W, Y, H, Z or M when the .mpu Mail Piece Unit – Class field is populated with 2 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cpt Component – Rate Type field with R, N, S, C, W, Y, H, Z or M when the .mpu Mail Piece Unit – Class field is populated with 2 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4145The .cpt Periodical Ad% Treatment field must be populated for components that are part of a Periodicals mailpiece when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .cpt Periodical Ad% Treatment field for components that are part of a Periodicals mailpiece when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cpt Periodical Ad% Treatment field for components that are part of a Periodicals mailpiece when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4146The .cpt Periodical Issue Date field must be populated for the host component in the Periodicals mailpiece when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .cpt Periodical Issue Date field for the host component in the Periodicals mailpiece when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cpt Periodical Issue Date field for the host component in the Periodicals mailpiece when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4147The .csm Container Type field contains an invalid value; it must contain ‘P’ or ‘V’ for Periodicals mailpieces when the .seg Class Defining Preparation field is populated with ‘6’.Populate the .csm Container Type with ‘P’ or ‘V’. · Multiple FilesAction: Populate the .csm Container Type with ‘P’ or ‘V’.Error location: Multiple Files4148The .csm Container Level field contains an invalid value; it must contain A, B, C, D, E, F, G, H, I, J, M, Q, R, S, T, U, V, W, X, Y, AB, AD, AE, AF, AG, AH for Periodicals mailpieces when the .seg Class Defining Preparation field is populated with 6.Populate the .csm Container Level field with A, B, C, D, E, F, G, H, I, J, M, Q, R, S, T, U, V, W, X, Y, AB, AD, AE, AF, AG, or AH. · .csmAction: Populate the .csm Container Level field with A, B, C, D, E, F, G, H, I, J, M, Q, R, S, T, U, V, W, X, Y, AB, AD, AE, AF, AG, or AH.Error location: .csm4150The value provided for The .csm Entry Point for Entry Discount – Facility Type field was {1}; it must contain Q = Origin AMF, I = INDC, S = DSCF, M = Dest AMF, N = Not-determined, O = Origin or C = Origin SCF when the .csm Container Level field is populated with C = Mxd CR in 3-digit, R = 3-Digit (Auto, Presort), S = 3-Digit (Barcode), T = 3-Digit (Presort), U = 3-Digit (CR, Auto, Presort), V = 3-Digit scheme, X = SCF, or Y = Protected SCF and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .csm Entry Point for Entry Discount – Facility Type field with Q, I, S, M, N, O or C when the .csm Container Level field is populated with C, R, S, T, U, V, X, or Y and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .csm Entry Point for Entry Discount – Facility Type field with Q, I, S, M, N, O or C when the .csm Container Level field is populated with C, R, S, T, U, V, X, or Y and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4151The value provided for The .csm Entry Point for Entry Discount - Facility Type field was {1}; it must contain C = Origin SCF, D = DDU, H = Tran Hub, J = Origin ADC, N = Not-determined, O = Origin, Q = Origin AMF, R = DADC, S = DSCF, or T = Orig (T-Hub Sq) when the .csm Container Level field is populated with A = CR-Direct , B = Mixed CR in 5 Digit, D = CR 5D Scheme, G = 5 Digit (Auto/Presort), H = 5 Digit (Merged), I = 5 Digit (Presort Only), J = 5 Digit (Barcode Only), M = 5D Scheme (Presort), N = 5D Scheme (Auto, Presort), P = 5D Scheme (Barcode), or Q = 5D Scheme (Merged) and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .csm Entry Point for Entry Discount - Facility Type field with J, C, O, R, S, D, Q, N, H, or T when the .csm Container Level field is populated with A, B, D, G, H, I, J, M, N, P, or Q and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .csm Entry Point for Entry Discount - Facility Type field with J, C, O, R, S, D, Q, N, H, or T when the .csm Container Level field is populated with A, B, D, G, H, I, J, M, N, P, or Q and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4152The value provided for The .csm Container Level field was {1}; it cannot contain Z = ADC, AA = AADC, AC = Mixed AADC, or AJ = Single Piece when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .csm Container Level field with a value other than Z, AA, AC, or AJ when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .csm Container Level field with a value other than Z, AA, AC, or AJ when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4155The value provided for The .csm Entry Point for Entry Discount – Facility Type field was {1}; it cannot contain R = DADC or J = Origin ADC when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .csm Entry Point for Entry Discount – Facility Type with a valid value for Std/Bound Printed Matter/Periodicals Co-Mailings. · Multiple FilesAction: Populate the .csm Entry Point for Entry Discount – Facility Type with a valid value for Std/Bound Printed Matter/Periodicals Co-Mailings.Error location: Multiple Files4156The .cqt Zone field value provided was{1}; it must contain N = Not Zoned when the .cqt Periodicals: Not County/In County field is populated with I(In County) and the .seg Class Defining Preparation field is populated with 6(Std/Bound Printed Matter/Periodicals Co-Mailings).Populate the .cqt Zone field with N when the .cqt Periodicals: Not County/In County field is populated with I and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cqt Zone field with N when the .cqt Periodicals: Not County/In County field is populated with I and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4161The .cqt Rate Category field value provided was {1}; it must contain A = Saturation - ECR, B = High Density - ECR, D = Carrier Route, E = 5 Digit Barcode, G = 5 Digit, H = 3 Digit Barcode, K = 3 Digit, FB = Firm Bundle, L = Basic Barcode, L4 = MxADC BC, L6 = MxADC/Mixed, FF = Reserved, or FN = Reserved when the .mpu Mail Piece Unit - Class field is populated with 2 (Periodicals) and the .seg Class Defining Preparation field is populated with 6 (Std/Bound Printed Matter/Periodicals Co-Mailings).Populate the .cqt Rate Category field with A, B, D, E, G, H, K, FB, L, L4, L6, FF, FN when the .mpu Mail Piece Unit - Class field is populated with 2 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cqt Rate Category field with A, B, D, E, G, H, K, FB, L, L4, L6, FF, FN when the .mpu Mail Piece Unit - Class field is populated with 2 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4162The .cqt Rate Category field value provided was {1}; it must contain A = Saturation - ECR, B = High Density - ECR, C = High Density Plus - ECR, C1 = Nonautomation High Density Plus - ECR, D = Carrier Route, E = 5 Digit Barcode, G = 5 Digit, H = 3 Digit Barcode, K = 3 Digit, L4 = MxADC BC, L6 = MxADC/Mixed, FI = Reserved, FF = Reserved, FG = Reserved, FJ = Reserved, FN = Reserved, or FH = Reserved when the .mpu Mail Piece Unit - Class field is populated with 3 (Std Mail) and the .seg Class Defining Preparation field is populated with 6(Std/Bound Printed Matter/Periodicals Co-Mailings). The value provided was {1}.Populate the .cqt Rate Category field with A, B, C, C1, D, E, G, H, K, L4, L6, FI, FF, FG, FJ, FN, FH when the .mpu Mail Piece Unit - Class field is populated with 3 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cqt Rate Category field with A, B, C, C1, D, E, G, H, K, L4, L6, FI, FF, FG, FJ, FN, FH when the .mpu Mail Piece Unit - Class field is populated with 3 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4163The .cqt Barcode Discount or Surcharge Indicator field value provided was {1}; it must contain B = Pays base rate (no surcharge or discount), D = Barcode discount (deducted from the base rate), or O (Other) when the .seg Class Defining Preparation field is populated with 6 (Std/Bound Printed Matter/Periodicals Co-Mailings).Populate the .cqt Barcode Discount or Surcharge Indicator field with B, D, or O when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cqt Barcode Discount or Surcharge Indicator field with B, D, or O when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4164The .cqt Periodicals: Sub/Non-Sub/Requester Indicator field value provided was {1}; it must contain S = Sub, N = None, or R = Requester when the .mpu Mail Piece Unit – Class field is populated with 2 (Std Mail) or 5 (Per Pending) and the .seg Class Defining Preparation field is populated with 6 (Std/Bound Printed Matter/Periodicals Co-Mailings).Populate the .cqt Periodicals: Sub/Non-Sub/Requester Indicator field with S, N, or R when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cqt Periodicals: Sub/Non-Sub/Requester Indicator field with S, N, or R when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4165The .cqt Periodicals: Sub/Non-Sub/Requester Indicator field value provided was {1}; it must contain O = Other when the .mpu Mail Piece Unit – Class field is populated with 3 (Std Mail) or 4 (Pkg Services) and the .seg Class Defining Preparation field is populated with 6 (Std/Bound Printed Matter/Periodicals Co-Mailings).Populate the .cqt Periodicals: Sub/Non-Sub/Requester Indicator field with O when the .mpu Mail Piece Unit – Class field is populated with 3 or 4 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cqt Periodicals: Sub/Non-Sub/Requester Indicator field with O when the .mpu Mail Piece Unit – Class field is populated with 3 or 4 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4166The .cqt Periodicals: Not County/In-County field value provided was {1}; it must contain I = In-County or N = Not In-County when the .mpu Mail Piece Unit – Class field is populated with 2 (Periodicals) or 5 (Per Pending) and the .seg Class Defining Preparation field is populated with 6 (Std/Bound Printed Matter/Periodicals Co-Mailings).Populate the .cqt Periodicals: Not County/In-County field with I or N when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cqt Periodicals: Not County/In-County field with I or N when the .mpu Mail Piece Unit – Class field is populated with 2 or 5 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4167The .cqt Periodicals: Not County/In-County field value provided was {1}; it must contain O = Other when the .mpu Mail Piece Unit – Class field is populated with 3 (Std Mail) or 4 (Pkg Services) and the .seg Class Defining Preparation field is populated with 6 (Std/Bound Printed Matter/Periodicals Co-Mailings).Populate the .cqt Periodicals: Not County/In-County field with O when the .mpu Mail Piece Unit – Class field is populated with 3 or 4 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cqt Periodicals: Not County/In-County field with O when the .mpu Mail Piece Unit – Class field is populated with 3 or 4 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4168The .pqt Package Level field value provided was {1}; it must contain A = Firm, B = Carrier Route, C = 5 Digit, D = Unique 3- F = 3 Digit, H = ADC, K = Origin MxADC, L = MxADC, T = 3-D Scheme, U = 5-D Scheme + L007, or V = NDC when the .mpu Mail Piece Unit - Class field is populated with 2(Periodicals) and the .seg Class Defining Preparation field is populated with 6(Std/Bound Printed Matter/Periodicals Co-Mailings).Populate the .pqt Package Level field with A, B, C, D, F, H, K, L, T, U, or V when the .mpu Mail Piece Unit - Class field is populated with 2 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .pqt Package Level field with A, B, C, D, F, H, K, L, T, U, or V when the .mpu Mail Piece Unit - Class field is populated with 2 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4169A bundle must only contain mail pieces with the .mpu Mail Piece Unit – Class field populated with 2 = Periodicals or 5 = Per Pending and the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats when the .pqt Package Level field is populated with A = Firm and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings. The value provided was {1}.Verify that the .mpu Mail Piece Unit – Class field is populated with 2 and the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats when the .pqt Package Level field is populated A and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Verify that the .mpu Mail Piece Unit – Class field is populated with 2 and the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats when the .pqt Package Level field is populated A and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4170The .seg Class Defining Preparation field value provided was {1}; it must contain 6 in all .seg records when multiple .seg records are submitted within the same job. 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .seg Class Defining Preparation field with 6 for all records. · Multiple FilesAction: Populate the .seg Class Defining Preparation field with 6 for all records.Error location: Multiple Files4171Required Field Missing: Job ID is a required field in the .pbc file.Populate the .pbc Job ID field. · .pbcAction: Populate the .pbc Job ID field.Error location: .pbc4172Required Field Missing: PBC Unique ID is a required field in the .pbc file.Populate the .pbc PBC Unique ID field. · .pbcAction: Populate the .pbc PBC Unique ID field.Error location: .pbc4173Required Field Missing: CQT DB ID is a required field in the .pbc file.Populate the .pbc CQT Database ID field. · .pbcAction: Populate the .pbc CQT Database ID field.Error location: .pbc4174Required Field Missing: Package ID is a required field in the .pbc file.Populate the .pbc Job ID field. · .pbcAction: Populate the .pbc Job ID field.Error location: .pbc4175Required Field Missing: PBC Record Status is a required field in the .pbc file.Populate the .pbc PBC Record Status field. · .pbcAction: Populate the .pbc PBC Record Status field.Error location: .pbc4176Alphanumeric Data Type Error: The .pbc PBC Record Status field must be populated with an alphanumeric value.Populate the .pbc PBC Record Status field with an alphanumeric value. · .pbcAction: Populate the .pbc PBC Record Status field with an alphanumeric value.Error location: .pbc4177Required Field Missing: PBC Closing Character is a required field in the .pbc file.Populate the .pbc Closing Character field. · .pbcAction: Populate the .pbc Closing Character field.Error location: .pbc4178The value provided for The .csm Container Type field was {1}; it must contain P = Pallet or V = Sack (virtual) when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .pbc Wasted or Shortage Piece Indicator field with an alphanumeric value. · .pbcAction: Populate the .pbc Wasted or Shortage Piece Indicator field with an alphanumeric value.Error location: .pbc4180The .seg Container and Bundle Charge Method field value provided was {1}; it cannot be populated with 2 – Charge all to one of the publications.Populate the .seg Container and Bundle Charge Method field with a value other than 2. · Multiple FilesAction: Populate the .seg Container and Bundle Charge Method field with a value other than 2.Error location: Multiple Files4181The .cpt Component – Class field must be populated with 1 = First Class when the .mpu Mail Piece Unit – Class field is populated with 1 = First Class. The value provided was {1}.Populate the .cpt Component – Class field with 1 when the .mpu Mail Piece Unit – Class field is populated with 1. · Multiple FilesAction: Populate the .cpt Component – Class field with 1 when the .mpu Mail Piece Unit – Class field is populated with 1.Error location: Multiple Files4182The .cpt Component – Class field must be populated with 1 = First Class, 2 = Periodicals, or 3 = Std Mail when the .mpu Mail Piece Unit – Class is populated with 2 = Periodicals. The value provided was {1}.Populate the .cpt Component – Class field with 1, 2, or 3 when the .mpu Mail Piece Unit – Class field is populated with 2. · Multiple FilesAction: Populate the .cpt Component – Class field with 1, 2, or 3 when the .mpu Mail Piece Unit – Class field is populated with 2.Error location: Multiple Files4183The .cpt Component – Class field must be populated with 1 = First Class, 3 = Std Mail, or 5 = Per Pending when the .mpu Mail Piece Unit – Class field is populated with 5 = Per Pending. The value provided was {1}.Populate the .cpt Component – Class field with 1, 3, or 5 when the .mpu Mail Piece Unit – Class field is populated with 5. · Multiple FilesAction: Populate the .cpt Component – Class field with 1, 3, or 5 when the .mpu Mail Piece Unit – Class field is populated with 5.Error location: Multiple Files4184The .cpt Component – Class field must be populated with 1 = First Class or 3 = Std Mail when the .mpu Mail Piece Unit – Class is populated with 3 = Std Mail. The value provided was {1}.Populate the .cpt Component – Class field with 1 or 3 when the .mpu Mail Piece Unit – Class field is populated with 3. · Multiple FilesAction: Populate the .cpt Component – Class field with 1 or 3 when the .mpu Mail Piece Unit – Class field is populated with 3.Error location: Multiple Files4185The .cpt Component – Class field must be populated with 1 = First Class or 4 = Pkg Services when the .mpu Mail Piece Unit – Class field is populated with 4 = Pkg Services. The value provided was {1}.Populate the .cpt Component – Class field with 1 or 4 when the .mpu Mail Piece Unit – Class field is populated with 4. · Multiple FilesAction: Populate the .cpt Component – Class field with 1 or 4 when the .mpu Mail Piece Unit – Class field is populated with 4.Error location: Multiple Files4186Record status for the .pbc file does not match the Header File Status.Populate the .pbc Record Status with a value that matches the .hdr Piece Barcode File Status. · .pbcAction: Populate the .pbc Record Status with a value that matches the .hdr Piece Barcode File Status.Error location: .pbc4187For .hdr File Processing, the .hdr Piece Barcode Record Count must match the record count of the Piece Barcode file.Populate the .pbc PBC Record Status field with the same value that is populated in the .hdr Piece Barcode File Status field. · .pbcAction: Populate the .pbc PBC Record Status field with the same value that is populated in the .hdr Piece Barcode File Status field.Error location: .pbc4188A .par file may not be submitted when the Spoilage Indicator in the pbc file is set to W or S.Do not attempt to submit a .par file when the .pbc Wasted or Shortage Piece Indicator field is populated with W or S. · Multiple FilesAction: Do not attempt to submit a .par file when the .pbc Wasted or Shortage Piece Indicator field is populated with W or S.Error location: Multiple Files4192The .mpu Machinability Indicator field value provided was {1}; it must contain Y = Machinable on ASFM 100 or U = Machinable on USFM 1000 when the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats and the .mpu Mail Piece Unit – Processing Category field is populated with 3 or 4 for FSS Preparation.Populate the .mpu Machinability Indicator field with Y or U when the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats and the .mpu Mail Piece Unit – Processing Category field is populated with 3 or 4 for FSS Preparation. · Multiple FilesAction: Populate the .mpu Machinability Indicator field with Y or U when the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats and the .mpu Mail Piece Unit – Processing Category field is populated with 3 or 4 for FSS Preparation.Error location: Multiple Files4193The value provided for The .csm Entry Point for Entry Discount - Facility Type field was {1}; it must contain S=DSCF, D=DDU, R=DADC, O=Origin, E=Origin DU, J=Origin ADC, C=Origin ASF, Q=Origin AMF, H = Trans Hub, T = Orig(T-Hub Sq), W = FSS, or Y = Origin FSS when the .mpu Mail Piece Unit - Class field is populated with 2=Periodicals for FSS Preparation.Populate the .csm Entry Point for Entry Discount - Facility Type field with S, D, R, O, E, J, C, Q, H, T, W, or Y when the .mpu Mail Piece Unit - Class field is populated with 2 for FSS Preparation. · Multiple FilesAction: Populate the .csm Entry Point for Entry Discount - Facility Type field with S, D, R, O, E, J, C, Q, H, T, W, or Y when the .mpu Mail Piece Unit - Class field is populated with 2 for FSS Preparation.Error location: Multiple Files4194The value provided for The .csm Entry Point for Entry Discount - Facility Type field was {1}; it must contain S = DSCF, D = DDU, O = Origin, E = Origin DU, Q = Origin AMF, C = Origin SCF, N = Not-determined, or W = FSS when the .mpu Mail Piece Unit - Class field is populated with 3 = Std Mail for FSS Preparation.Populate the .csm Entry Point for Entry Discount - Facility Type field with S, D, O, E, Q, C, N, or W when the .mpu Mail Piece Unit - Class field is populated with 3 for FSS Preparation. · Multiple FilesAction: Populate the .csm Entry Point for Entry Discount - Facility Type field with S, D, O, E, Q, C, N, or W when the .mpu Mail Piece Unit - Class field is populated with 3 for FSS Preparation.Error location: Multiple Files4195The value provided for The .csm Entry Point for Entry Discount - Facility Type field was {1}; it must contain S = SCF, D = DDU, O = Origin, E = Origin DU, J = Origin ADC, Q = Origin AMF, C = Origin SCF, or W = FSS when the .mpu Mail Piece Unit - Class field is populated with 4 and the .mpu Mail Piece Unit - Rate Type field is populated with B = BPM for FSS Preparation.Populate the .csm Entry Point for Entry Discount - Facility Type field with S, D, O, E, J, Q, C, or W when the .mpu Mail Piece Unit - Class field is populated with 4 and the .mpu Mail Piece Unit - Rate Type field is populated with B for FSS Preparation. · Multiple FilesAction: Populate the .csm Entry Point for Entry Discount - Facility Type field with S, D, O, E, J, Q, C, or W when the .mpu Mail Piece Unit - Class field is populated with 4 and the .mpu Mail Piece Unit - Rate Type field is populated with B for FSS Preparation.Error location: Multiple Files4198The .mpu Mail Piece Unit – Weight must be greater than or equal to 3.5oz and less than 16oz when the .mpu Mail Piece Unit – Class field is populated with 1= First Class, the .mpu Rate Schedule field is populated with P = Commercial Plus, and the .mpu Mail Piece Unit – Processing Category field is populated with IR = Nonstandard Parcel or MP = Machinable Parcels. The value provided was {1}.Populate the .mpu Mail Piece Unit – Weight with a value that is greater than or equal to 3.5oz and less than 16oz when the .mpu Mail Piece Unit – Class field is populated with 1, the .mpu Rate Schedule field is populated with P, and the .mpu Mail Piece Unit – Processing Category field is populated with IR = Nonstandard Parcel or MP = Machinable Parcels. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Weight with a value that is greater than or equal to 3.5oz and less than 16oz when the .mpu Mail Piece Unit – Class field is populated with 1, the .mpu Rate Schedule field is populated with P, and the .mpu Mail Piece Unit – Processing Category field is populated with IR = Nonstandard Parcel or MP = Machinable Parcels.Error location: Multiple Files4199The .mpu MPU Surcharge must be set to N to indicate machinable when the .mpu Mail Piece Unit – Class field is populated with 1= First Class, the .mpu Rate Schedule field is populated with P = Commercial Plus, and the .mpu Mail Piece Unit – Processing Category field is populated with IR = Nonstandard Parcel or MP = Machinable Parcels (Under 1lb). The value provided was {1}.Populate the .mpu MPU Surcharge field with N when he .mpu Mail Piece Unit – Class field is populated with 1, the .mpu Rate Schedule field is populated with P, and the .mpu Mail Piece Unit – Processing Category field is populated with IR = Nonstandard Parcel or MP = Machinable Parcels. · Multiple FilesAction: Populate the .mpu MPU Surcharge field with N when he .mpu Mail Piece Unit – Class field is populated with 1, the .mpu Rate Schedule field is populated with P, and the .mpu Mail Piece Unit – Processing Category field is populated with IR = Nonstandard Parcel or MP = Machinable Parcels.Error location: Multiple Files4200The .mpa Postage Payment Method must be populated with P = Permit or G = Gov’t – Fed (use Permit) when the .mpu Mail Piece Unit – Class field is populated with 1 = First Class, the .mpu Rate Schedule field is populated with P = Commercial Plus, and the .mpu Mail Piece Unit – Processing Category field is populated with IR = Nonstandard Parcel or MP = Machinable Parcels (Under 1lb).Populate the .mpa Postage Payment Method field with P or G when the .mpu Mail Piece Unit – Class field is populated with 1, the .mpu Rate Schedule field is populated with P, and the .mpu Mail Piece Unit – Processing Category field is populated with IR = Nonstandard Parcel or MP = Machinable Parcels (Under 1lb). · Multiple FilesAction: Populate the .mpa Postage Payment Method field with P or G when the .mpu Mail Piece Unit – Class field is populated with 1, the .mpu Rate Schedule field is populated with P, and the .mpu Mail Piece Unit – Processing Category field is populated with IR = Nonstandard Parcel or MP = Machinable Parcels (Under 1lb).Error location: Multiple Files4201The .cpt Component – Weight field must be populated with a value that is less than or equal to 1.25lbs when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals or 5 = Per Pending, the .mpu Mail Piece Unit – Processing Category field is populate with FL = Flats, and the .mpu Machinability Indicator field is populated with U = Machinable on USFM 1000.Populate the .cpt Component – Weight field with a value that is less than or equal to 1.25lbs when the .mpu Mail Piece Unit – Class field is populated with 2 or 5, the .mpu Mail Piece Unit – Processing Category field is populate with FL = Flats, and the .mpu Machinability Indicator field is populated with U. · Multiple FilesAction: Populate the .cpt Component – Weight field with a value that is less than or equal to 1.25lbs when the .mpu Mail Piece Unit – Class field is populated with 2 or 5, the .mpu Mail Piece Unit – Processing Category field is populate with FL = Flats, and the .mpu Machinability Indicator field is populated with U.Error location: Multiple Files4202The .mpu Mail Piece Unit – Weight field must be populated with a value that is less than or equal to 15lbs when the .mpu Mail Piece Unit – Class field is populated with 4 = Pkg Services and the .mpu Mail Piece Unit – Rate Type field is populated with B = Bound Printed Matter and does not contain a barcode. The value provided was {1}.Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 15lbs when the .mpu Mail Piece Unit – Class field is populated with 4 and the .mpu Mail Piece Unit – Rate Type field is populated with B and does not contain a barcode. · .mpuAction: Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 15lbs when the .mpu Mail Piece Unit – Class field is populated with 4 and the .mpu Mail Piece Unit – Rate Type field is populated with B and does not contain a barcode.Error location: .mpu4203The .mpu Mail Piece Unit – Weight field must be populated with a value that is less than or equal to 70lbs when the .mpu Mail Piece Unit – Class field is populated with 4 = Pkg Services and the .mpu Mail Piece Unit – Rate Type field is populated with F = Media or L = Library, the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats and does not contain a barcode. The value provided was {1}.Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 70lbs when the .mpu Mail Piece Unit – Class field is populated with 4 and the .mpu Mail Piece Unit – Rate Type field is populated with F or L, the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats and does not contain a barcode. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 70lbs when the .mpu Mail Piece Unit – Class field is populated with 4 and the .mpu Mail Piece Unit – Rate Type field is populated with F or L, the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats and does not contain a barcode.Error location: Multiple Files4204The value provided for The .csm Container Type field was {1}; it must contain V = Sack (Virtual) when the .csm Included In Other Documentation field is populated with O = Origin or I = Internal co-palletization indicator from the Origin Job – Original Container, and the .seg Class Defining Preparation field is populated with 6=Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .csm Container Type field with V when the .csm Included In Other Documentation field is populated with O or I and the .seg Class Defining Preparation field is populated with 6. · .csm, .segAction: Populate the .csm Container Type field with V when the .csm Included In Other Documentation field is populated with O or I and the .seg Class Defining Preparation field is populated with 6.Error location: .csm, .seg4205The .csm Parent Container Reference ID must be blank when the .csm Included In Other Documentation field is populated with O = Origin and the .seg Class Defining Preparation field is populated with 6=Std/Bound Printed Matter/Periodicals Co-Mailings.Verify that the .csm Parent Container Reference ID field is not populated when the .csm Included In Other Documentation field is populated with O and the .seg Class Defining Preparation field is populated with 6. · .csm, .segAction: Verify that the .csm Parent Container Reference ID field is not populated when the .csm Included In Other Documentation field is populated with O and the .seg Class Defining Preparation field is populated with 6.Error location: .csm, .seg4206Required File Missing: The .hdr, .seg, .mpu, .mcr, .mpa, .cpt, .csm, .cqt, .pqt, and .oci files must be included in the consolidated job for a bundle based co-palletization mailing.Include the .hdr, .seg, .mpu, .mcr, .mpa, .cpt, .csm, .cqt, .pqt, and .oci files in the consolidated job for a bundle based co-palletization mailing. · Multiple FilesAction: Include the .hdr, .seg, .mpu, .mcr, .mpa, .cpt, .csm, .cqt, .pqt, and .oci files in the consolidated job for a bundle based co-palletization mailing.Error location: Multiple Files4207The .hdr Mail.dat Presentation Category field value provided was {1}; it must contain P= Conventional Presort; when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .hdr Presentation Category field with P when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .hdr Presentation Category field with P when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4208The .seg Class Defining Preparation field value provided was {1}; it must contain 6 when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals, 3 = Std Mail and 4 = Pkg Services.Populate the .seg Class Defining Preparation field with 6 when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals, 3 = Std Mail and 4 = Pkg Services. · Multiple FilesAction: Populate the .seg Class Defining Preparation field with 6 when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals, 3 = Std Mail and 4 = Pkg Services.Error location: Multiple Files4209The .seg Principal Processing Category field value provided was {1}; it must contain FL = Flats when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .seg Principal Processing Category field with FL = Flats when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .seg Principal Processing Category field with FL = Flats when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4211The .seg Log/Phy PACKAGE Indicator field value provided was {1}; it must contain P = Physical Container when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .seg Log/Phy PACKAGE Indicator field with P when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .seg Log/Phy PACKAGE Indicator field with P when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4214The .mpu Mail Piece Unit – Class field value provided was {1}; it must contain 2 = Periodicals, 3 = Std Mail, 4 = Pkg Services, or 5 = Per Pending when the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpu Mail Piece Unit – Class field with 2, 3, 4, or 5 when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Class field with 2, 3, 4, or 5 when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4215The .mpu Mail Piece Unit – Rate Type field value provided was {1}; it must contain R = Regular (US/MEX/CAN) N = Nonprofit S = Science of Agriculture C = Classroom W = Science of Agriculture Limited Circulation or Y = Regular Limited Circulation when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpu Mail Piece Unit – Rate Type field with R, N, S, C, W or Y for when the .mpu Mail Piece Unit – Class field is populated with 2 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Rate Type field with R, N, S, C, W or Y for when the .mpu Mail Piece Unit – Class field is populated with 2 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4216The .mpu Mail Piece Unit – Rate Type field value provided was {1}; it must contain R = Regular (US/MEX/CAN) or N = Nonprofit when the .mpu Mail Piece Unit – Class field is populated with 3 = Std Mail and the .seg Class Defining Preparation field is populated with 6=Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpu Mail Piece Unit – Rate Type field with R or N when the .mpu Mail Piece Unit – Class field is populated with 3 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Rate Type field with R or N when the .mpu Mail Piece Unit – Class field is populated with 3 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4217The value provided for the .csm Entry Point for Entry Discount - Facility Type field was {1}; it must contain S = DSCF, D = DDU, R = DADC, O = Origin, N = Not-determined, C = Origin SCF, E = Origin DU, J = Origin ADC, Q = Origin AMF, H = Trans Hub, T = Origin(T-Hub Sq), W = FSS, or Y = FSS Origin.Populate the .csm Entry Point for Entry Discount - Facility Type field with S, D, R, O, N, C, E, J, Q, W or Y. · .csmAction: Populate the .csm Entry Point for Entry Discount - Facility Type field with S, D, R, O, N, C, E, J, Q, W or Y.Error location: .csm4218Required Field Missing: Piece Barcode Record Count is a required field in the .hdr file.Populate the .hdr Piece Barcode Record Count field. · .pbcAction: Populate the .hdr Piece Barcode Record Count field.Error location: .pbc4219Numeric Data Type Error: Piece Barcode Record Count must be a numeric value in the .hdr file.Populate the .hdr Piece Barcode Record field with a numeric value. · .pbcAction: Populate the .hdr Piece Barcode Record field with a numeric value.Error location: .pbc4220Required Field Missing: Piece Barcode File Status is a required field in the .hdr file.Populate the .hdr Piece Barcode File Status field. · .pbcAction: Populate the .hdr Piece Barcode File Status field.Error location: .pbc4221The .hdr Piece Barcode File Status field value provided was {1}; it must contain O = Original, N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Piece Barcode File Status field with O = Original, N = None Transmitted, D = Delete, C = Change, U = Update. · .pbcAction: Populate the .hdr Piece Barcode File Status field with O = Original, N = None Transmitted, D = Delete, C = Change, U = Update.Error location: .pbc4226Blank line on line {0} of the .pbc file..pbcError location: .pbc4227Wasted or Shorted piece data may not be included in the .pbc file when the .csm Container Type field is populated with V= Sack (Virtual)and the .csm Included In Other Documentation field is populated with O= Original Container or I = Internal co-palletization indicator from the Origin Job – Original Container.Do not included wasted or shorted piece information in the .pbc file when the .csm Container Type field is populated with V and the .csm Included In Other Documentation field is populated with O or I. · .pbcAction: Do not included wasted or shorted piece information in the .pbc file when the .csm Container Type field is populated with V and the .csm Included In Other Documentation field is populated with O or I.Error location: .pbc4230The .mpu Mail Piece Unit – Class field value provided was {1}; it must contain 1 = First Class 2 = Periodicals or 3 = Std Mail when the .cpt Postal Price Incentive Type field is populated with MB = Mobile Barcode.Populate the .mpu Mail Piece Unit – Class field with 1, 2, or 3 when the .cpt Postal Price Incentive Type field is populated with MB. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Class field with 1, 2, or 3 when the .cpt Postal Price Incentive Type field is populated with MB.Error location: Multiple Files4235Alphanumeric Data Type Error: CSA Agreement ID must be an alphanumeric value in the .csm file.Populate the .csm CSA Agreement ID field with an alphanumeric value. · .csmAction: Populate the .csm CSA Agreement ID field with an alphanumeric value.Error location: .csm4236The .csm Postage Statement Mailing Date field values cannot span the proposed price change date; within a job these dates must either be all before or all after {1}.Populate the .csm Postage Statement Mailing Date field with a value that does not span the price change date. · .csmAction: Populate the .csm Postage Statement Mailing Date field with a value that does not span the price change date.Error location: .csm4254The .csm Accept Misshipped field contains an invalid value, it must contain Y = Yes when populated. The value provided was {1}.Populate the .csm Accept Misshipped field with Y when populated. · .csmAction: Populate the .csm Accept Misshipped field with Y when populated.Error location: .csm4256The .seg Class Defining Preparation must be populated with 1 = First Class when the .csm Container Level field is populated with AK = MXDS – Mixed Surface CSA FCM Only, AL = MXDA – Mixed Air CSA FCM Only, AM = Working CSA FCM Only, AN = Single Piece CSA FCM Only, AO= Surface CSA FCM Only, AP = Air CSA FCM Only, or AQ = Local CSA FCM Only. The value provided was {1}.Populate the .seg Class Defining Preparation field with 1 when the .csm Container Level field is populated with AK, AL, AM, AN, AO, AP, or AQ. · .segAction: Populate the .seg Class Defining Preparation field with 1 when the .csm Container Level field is populated with AK, AL, AM, AN, AO, AP, or AQ.Error location: .seg4263For eInduction processing, the .csm Label: IM Container Or IM Tray Barcode field must be populated when the .csm Container Type field is populated with P = Pallet, H = EIRS 61 – Hamper, Large Canvas, A = EIRS 61P – Hamper, Large Plastic, G = EIRS 66 – General Purpose Mail Container w/Gate, D = EIRS 68 – Eastern Region Mail Container w/Web Door, R = EIRS 84 – Wire Container Rigid, C = EIRS 84C – Collapsible Wire Container, Z = User Pallet or AB = Air Box. The value provided was {1}.Populate the .csm Label: IM Container Or IM Tray Barcode field when the .csm Container Type field is populated with P, H, A, G, D, R, C, Z, or AB. · .csmAction: Populate the .csm Label: IM Container Or IM Tray Barcode field when the .csm Container Type field is populated with P, H, A, G, D, R, C, Z, or AB.Error location: .csm4264For eInduction processing, the .csm Entry Point – Actual / Delivery – Locale Key field must be populated when the .csm Container Type field is populated with P = Pallet, H = EIRS 61 – Hamper, Large Canvas, A = EIRS 61P – Hamper, Large Plastic, G = EIRS 66 – General Purpose Mail Container w/Gate, D = EIRS 68 – Eastern Region Mail Container w/Web Door, R = EIRS 84 – Wire Container Rigid, C = EIRS 84C – Collapsible Wire Container, Z = User Pallet, AB = Air Box, M = Logical Pallet (MLOCR), T = 2’ Tray, O = 1’ Tray, E = EMM Tray, F = Flat Tub, S = Sack (general), 1 = #1 Sack, 2 = #2 Sack, 3 = #3 Sack, or L =Logical Tray (MLOCR) and the .csm Sibling Container Indicator field is not populated.Populate the .csm Entry Point – Actual / Delivery – Locale Key field when the .csm Container Type field is populated with P, H, A, G, D, R, C, Z, AB, M, T, O, E, F, S, 1, 2, 3, or L and the .csm Sibling Container Indicator field is not populated. · .csmAction: Populate the .csm Entry Point – Actual / Delivery – Locale Key field when the .csm Container Type field is populated with P, H, A, G, D, R, C, Z, AB, M, T, O, E, F, S, 1, 2, 3, or L and the .csm Sibling Container Indicator field is not populated.Error location: .csm4265For eInduction processing, the .csm Label: IM Container Or IM Tray Barcode field must contain exactly 21 characters when the .csm Container Type field is populated with P = Pallet, H = EIRS 61 – Hamper, Large Canvas, A = EIRS 61P – Hamper, Large Plastic, G = EIRS 66 – General Purpose Mail Container w/Gate, D = EIRS 68 – Eastern Region Mail Container w/Web Door, R = EIRS 84 – Wire Container Rigid, Z = User Pallet or AB = Air Box. The value provided was {1}.Populate the .csm Label: IM Container Or IM Tray Barcode field with exactly 21 characters when the .csm Container Type field is populated with P, H, A, G, D, R, C, Z, or AB. · .csmAction: Populate the .csm Label: IM Container Or IM Tray Barcode field with exactly 21 characters when the .csm Container Type field is populated with P, H, A, G, D, R, C, Z, or AB.Error location: .csm4266For eInduction processing, the .csm Label: IM Container Or IM Tray Barcode field must begin with ‘99M’ when the .csm Container Type field is populated with P = Pallet, H = EIRS 61 – Hamper, Large Canvas, A = EIRS 61P – Hamper, Large Plastic, G = EIRS 66 – General Purpose Mail Container w/Gate, D = EIRS 68 – Eastern Region Mail Container w/Web Door, R = EIRS 84 – Wire Container Rigid, Z = User Pallet or AB = Air Box. The value provided was {1}.Populate the .csm Label: IM Container Or IM Tray Barcode field with a value that begins with ‘99M’ when the .csm Container Type field is populated with P, H, A, G, D, R, C, Z, or AB. · .csmAction: Populate the .csm Label: IM Container Or IM Tray Barcode field with a value that begins with ‘99M’ when the .csm Container Type field is populated with P, H, A, G, D, R, C, Z, or AB.Error location: .csm4270The value provided for The .csm eInduction Indicator field was {1}, it must contain Y = Yes when populated.Populate the .csm eInduction Indicator field with Y when populated. · ,csmAction: Populate the .csm eInduction Indicator field with Y when populated.Error location: ,csm4271The .par MPA – Unique Sequence/Grouping ID field must match the corresponding .mpa MPA – Unique Sequence/Grouping ID field.Populate the .par MPA – Unique Sequence / Grouping ID field with the same value that is populated in the .mpa MPA – Unique Sequence / Grouping ID field. · .parAction: Populate the .par MPA – Unique Sequence / Grouping ID field with the same value that is populated in the .mpa MPA – Unique Sequence / Grouping ID field.Error location: .par4273The .mpa USPS Publication Number field cannot have leading zeroes.Populate the .mpa USPS Publication Number field with a value that does not contain leading zeroes. · ,mpaAction: Populate the .mpa USPS Publication Number field with a value that does not contain leading zeroes.Error location: ,mpa4274The .mpa Permit Number field cannot have leading zeroes.Populate the .mpa Permit Number field with a value that does not contain leading zeroes. · ,mpaAction: Populate the .mpa Permit Number field with a value that does not contain leading zeroes.Error location: ,mpa4275The .mpa Mail Owner’s Lcl Permit Ref Num / Int’l Bill Num field cannot have leading zeroes.Populate the .mpa Mail Owner’s Lcl Permit Ref Num / Int’l Bill Num field with a value that does not contain leading zeroes. · ,mpaAction: Populate the .mpa Mail Owner’s Lcl Permit Ref Num / Int’l Bill Num field with a value that does not contain leading zeroes.Error location: ,mpa4276When updating the .csm Container Status of a parent container to R = Ready to pay, the .csm Container Status field of all child containers must also be updated to R = Ready to pay. The value provided was {1}.Populate the .csm Container Status field with R for all child containers when the parent container .csm Container Status field is populated with R. · .csmAction: Populate the .csm Container Status field with R for all child containers when the parent container .csm Container Status field is populated with R.Error location: .csm4277The .cqt Simplified Address Indicator field value provided was {1}, it must contain M = EDDM Mixed (Residential and Business), R = EDDM Residential-only, Y = Yes Simplified Address, or B = EDDM Business-only when populated and the .mpu Mail Piece Unit – Class field is populated with 3 = Std Mail.Populate the .cqt Simplified Address Indicator field with M, R, Y or B when populated and the .mpu Mail Piece Unit – Class field is populated with 3. · .csm, .pbcAction: Populate the .cqt Simplified Address Indicator field with M, R, Y or B when populated and the .mpu Mail Piece Unit – Class field is populated with 3.Error location: .csm, .pbc4281The .csm Postage Statement Mailing Date cannot be set to a date on or after the upcoming price change date – {1}.Populate the .csm Postage Statement Mailing Date field with a value that is not on or after the upcoming price change date. · .csmAction: Populate the .csm Postage Statement Mailing Date field with a value that is not on or after the upcoming price change date.Error location: .csm4282The .cqt Rate Category field value provided was {1}; it must contain E = 5 Digit Barcode, G = 5 Digit, H = 3 Digit BC, K= 3 Digit, L2 = MxAADC/Mixed BC, L6 = MxADC/Mixed, L7 = AADC/3 Digit Machinable, L8 = MxAADC/Mixed Machinable, or S = Single Piece for MLOCR mailings when the .mpu Mail Piece Unit - Class field is populated with 1 = First Class and the . mpu Mail Piece Unit - Processing Category field is populated with LT = Letters.Populate the .cqt Rate Category field with E, G, K, L2, L6, L7, L8, or S for MLOCR mailings when the .mpu Mail Piece Unit - Class field is populated with 1 and the .mpu Mail Piece Unit - Processing Category field is populated with LT = Letters. · Multiple FilesAction: Populate the .cqt Rate Category field with E, G, K, L2, L6, L7, L8, or S for MLOCR mailings when the .mpu Mail Piece Unit - Class field is populated with 1 and the .mpu Mail Piece Unit - Processing Category field is populated with LT = Letters.Error location: Multiple Files4288The .mpu Mail Piece Unit – Weight field value provided was {1}; it must contain a value that is less than or equal to 16 oz. when the .mpu Mail Piece Unit – Class field is populated with 3 = Std Mail and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings for FSS mailings.Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 16oz when the .mpu Mail Piece Unit – Class field is populated with 3 and the .seg Class Defining Preparation field is populated with 6 for FSS mailings. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 16oz when the .mpu Mail Piece Unit – Class field is populated with 3 and the .seg Class Defining Preparation field is populated with 6 for FSS mailings.Error location: Multiple Files4289The .cqt Rate Category field value provided was {1}; it cannot contain A = Saturation – ECR for FSS mailings when the .seg Class Defining Preparation field is populated with 6 = standard/periodicals co-mailings.Populate the .cqt Rate Category field with a value other than A when the .seg Class Defining Preparation field is populated with 6 for FSS mailings. · Multiple FilesAction: Populate the .cqt Rate Category field with a value other than A when the .seg Class Defining Preparation field is populated with 6 for FSS mailings.Error location: Multiple Files4290The .pqt Package Level field value provided was {1}; it must contain A, B, C, D, F, H, I, K, L, M, T, U, V, or X when the .csm Container Level field is populated with E or F and the .mpu Mail Piece Unit – Class field is populated with 2 or 5.Populate the .pqt Package Level field with a value other than X when the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .pqt Package Level field with a value other than X when the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4299An .oci file cannot be included in a mailing when the .csm Included In Other Documentation field is populated with O = Original Container or I = Internal co-palletization indicator from the Origin Job – Original Container.Include the .oci file in the mailing when the .csm Included In Other Documentation field is populated with O or I. · .ociAction: Include the .oci file in the mailing when the .csm Included In Other Documentation field is populated with O or I.Error location: .oci4303The .mpa Payment Account Number must be an active account on the PostalOne!, or EPS systems when the .mpa Account Number field is populated.Populate the .mpa Account Number field with a value that is active in PostalOne! and the EPS systems when populated. · .mpaAction: Populate the .mpa Account Number field with a value that is active in PostalOne! and the EPS systems when populated.Error location: .mpa4304Job ID is a required field in the .ccr file.Populate the .ccr Job ID field. · .ccrAction: Populate the .ccr Job ID field.Error location: .ccr4305The .ccr Job ID must field must be populated with an alphanumeric value.Populate the .ccr Job ID field with an alphanumeric value. · .ccrAction: Populate the .ccr Job ID field with an alphanumeric value.Error location: .ccr4306The .ccr Job ID field does not match the .hdr Job ID field.Populate the .ccr Job ID field with the same value that is populated in the .hdr Job ID field. · .ccrAction: Populate the .ccr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: .ccr4307Component ID is a required field in the .ccr file.Populate the .ccr Component ID field. · .ccrAction: Populate the .ccr Component ID field.Error location: .ccr4308The .ccr Component ID field does not have a corresponding .cpt Component ID.Populate the .ccr Component ID field with a value that exists in the .cpt Component ID field. · .ccrAction: Populate the .ccr Component ID field with a value that exists in the .cpt Component ID field.Error location: .ccr4310The value provided for the .ccr CCR Record status field was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .ccr CCR Record Status field with O, D, I or U. · .ccrAction: Populate the .ccr CCR Record Status field with O, D, I or U.Error location: .ccr4311The value provided for the Closing Character field was {1}; it must contain #.Populate the .ccr Closing Character field with #. · .ccrAction: Populate the .ccr Closing Character field with #.Error location: .ccr4312Characteristic is a required field in the .ccr file.Populate the .ccr Characteristics field. · .ccrAction: Populate the .ccr Characteristics field.Error location: .ccr4313Referential Integrity Error: There cannot be duplicate primary keys in the .ccr file (Component ID, Characteristic Type, and Characteristic).Populate the .ccr Component ID and Characteristic field with unique values in the .ccr file. · .ccrAction: Populate the .ccr Component ID and Characteristic field with unique values in the .ccr file.Error location: .ccr4314The .ccr CCR Record Status field does not match the .hdr Component Characteristics File Status field.Populate the .ccr CCR Record Status field with the same value that is populated in the .hdr Component Characteristics File Status field. · .ccrAction: Populate the .ccr CCR Record Status field with the same value that is populated in the .hdr Component Characteristics File Status field.Error location: .ccr4315The .hdr Component Characteristic Record Count field must match the Record Count of the Component Characteristic File.Populate the .hdr Component Characteristic Record Count field with a value that is equal to the Record Count of the Component Characteristic file. · Multiple FilesAction: Populate the .hdr Component Characteristic Record Count field with a value that is equal to the Record Count of the Component Characteristic file.Error location: Multiple Files4316The .seg Class Defining Preparation value provided was {1}; it must contain 1 when the .mpu Mail Piece Unit – Rate Type is populated with V and the .mpu Mail Piece Unit – Class field is populated with 1. 1 = First Class V = FCM Election Mail 1 = First Class.Populate the .seg Class Defining Preparation field with 1 when the .mpu Mail Piece Unit – Rate Type is populated with V and the .mpu Mail Piece Unit – Class field is populated with 1. · Multiple FilesAction: Populate the .seg Class Defining Preparation field with 1 when the .mpu Mail Piece Unit – Rate Type is populated with V and the .mpu Mail Piece Unit – Class field is populated with 1.Error location: Multiple Files4317The .mpu Mail Piece Unit – Processing Category value provided was {1}; it must be populated with LT = Letters or CD = Cards when the .mpu Mail Piece Unit – Rate Type is populated with V = FCM Election Mail and the .mpu Mail Piece Unit – Class field is populated with 1 = First Class.Populate the .mpu Mail Piece Unit – Processing Category field with LT = Letters or CD = Cards when the .mpu Mail Piece Unit – Rate Type is populated with V and the .mpu Mail Piece Unit – Class field is populated with 1. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Processing Category field with LT = Letters or CD = Cards when the .mpu Mail Piece Unit – Rate Type is populated with V and the .mpu Mail Piece Unit – Class field is populated with 1.Error location: Multiple Files4319The value provided for the .mpa Postage Payment Method was {1}; it must contain P = Permit L = Metered: Lowest C = Metered: Correct M = Metered: Neither S = Stamp or G = Gov’t – Fed (use Permit) when the .mpu Mail Piece Unit – Class field is populated with 1 and the .mpu Mail Piece Unit – Rate Type field is populated with V = FCM Election Mail.Populate the .mpa Postage Payment Method field with P, L, C, M, S, or G when the .mpu Mail Piece Unit – Class field is populated with 1 and the .mpu Mail Piece Unit – Rate Type field is populated with V. · .mpaAction: Populate the .mpa Postage Payment Method field with P, L, C, M, S, or G when the .mpu Mail Piece Unit – Class field is populated with 1 and the .mpu Mail Piece Unit – Rate Type field is populated with V.Error location: .mpa4320The .mpu Mail Piece Unit – Rate Type field provided was {1}; all .mpu Mail Piece Unit – Rate Type must be populated with V = FCM Election Mail when at least one .mpu Mail Piece Unit – Rate Type is populated with V = FCM Election Mail.Populate all .mpu Mail Piece Unit – Rate Type field with V when at least one .mpu Mail Piece Unit – Rate Type is populated with V. · .mpuAction: Populate all .mpu Mail Piece Unit – Rate Type field with V when at least one .mpu Mail Piece Unit – Rate Type is populated with V.Error location: .mpu4321At least one .cpt Component – Rate Type must be populated with V when the .mpu Mail Piece Unit – Rate Type is populated with V = FCM Election Mail and the . Mpu Mail Piece Unit Class field is populated with 1 = First Class. The value provided was {1}.Populate at least one .cpt Component – Rate Type field with V when the .mpu Mail Piece Unit – Rate Type is populated with V and the . Mpu Mail Piece Unit Class field is populated with 1. · Multiple FilesAction: Populate at least one .cpt Component – Rate Type field with V when the .mpu Mail Piece Unit – Rate Type is populated with V and the . Mpu Mail Piece Unit Class field is populated with 1.Error location: Multiple Files4322The value provided for the .mpa Postage Payment Method field was {1}; it must contain P = Permit when the .seg Detached Mailing Label Indicator field is populated with = A = Detached Address Label.Populate the .mpa Postage Payment Method field with P when the .seg Detached Mailing Label Indicator field is populated with A. · Multiple FilesAction: Populate the .mpa Postage Payment Method field with P when the .seg Detached Mailing Label Indicator field is populated with A.Error location: Multiple Files4323The value provided for the .mpa Postage Payment Method was {1}; it must contain P = Permit L = Metered: Lowest C = Metered: Correct M = Metered: Neither or G = Gov’t – Fed (use Permit) when the .mpu Rate Schedule field is blank and the .mpu Mail Piece Unit – Class is populated with 1 = First Class or 4 = Pkg Services.Populate the .mpa Postage Payment Method field with P, L, C, M or G when the .mpu Rate Schedule field is blank and the .mpu Mail Piece Unit – Class is populated with 1 or 4. · .mpaAction: Populate the .mpa Postage Payment Method field with P, L, C, M or G when the .mpu Rate Schedule field is blank and the .mpu Mail Piece Unit – Class is populated with 1 or 4.Error location: .mpa4324The .seg Detached Mailing Label Indicator value provided was {1}; it must contain A = Detached Address Label or left blank if not applicable.Populate the .seg Detached Mailing Label Indicator field with A or leave blank. · .segAction: Populate the .seg Detached Mailing Label Indicator field with A or leave blank.Error location: .seg4325The value provided for the .mpa Postage Payment Method was {1}; it must contain P = Permit or G = Gov’t – Fed (use Permit) when the .sfr Service Type field is populated with PP = Picture Permit Imprint.Populate the .mpa Postage Payment Method field with P or G when the .sfr Service Type field is populated with PP. · Multiple FilesAction: Populate the .mpa Postage Payment Method field with P or G when the .sfr Service Type field is populated with PP.Error location: Multiple Files4326The .mpu Mail Piece Unit – Class value provided was {1}; it must contain 1 = First Class 3 = Std Mail or 4 = Pkg Services when the .ccr Characteristic field is populated with PP = Picture Permit Indicia.Populate the .mpu Mail Piece Unit – Class field with 1, 3, or 4 when the .ccr Characteristic field is populated with PP. · .mpuAction: Populate the .mpu Mail Piece Unit – Class field with 1, 3, or 4 when the .ccr Characteristic field is populated with PP.Error location: .mpu4327The value provided for the .cpt Component – Rate Type field was {1}; it cannot contain I = First Class Permit Reply Mail when the .mpu Mail Piece Unit – Class field is populated with 1 = First Class and the .ccr Characteristic field is populated with PP = Picture Permit Indicia.Populate the .cpt Component – Rate Type field with a value other than I when the .mpu Mail Piece Unit – Class field is populated with 1 and the .ccr Characteristic field is populated with PP. · .cptAction: Populate the .cpt Component – Rate Type field with a value other than I when the .mpu Mail Piece Unit – Class field is populated with 1 and the .ccr Characteristic field is populated with PP.Error location: .cpt4328The .mpu Mail Piece Unit – Class contains an invalid value; it must contain 1 = First Class 2 = Periodicals 3 = Std Mail 5 = Per Pending when the .ccr Characteristic field is populated with MI = Mobile Interactive Technology.Populate the .mpu Mail Piece Unit – Class field with 1, 2, 3, or 5 when the .ccr Characteristic field is populated with MI. · .mpuAction: Populate the .mpu Mail Piece Unit – Class field with 1, 2, 3, or 5 when the .ccr Characteristic field is populated with MI.Error location: .mpu4331The .seg Verification Facility ZIP+4 field must be populated with a five or nine digit numeric value when the .mpa Account Number field is populated. The value provided was {1}.Populate the .seg Verification Facility ZIP+4 field with a five or nine digit numeric value when the .mpa Account Number field is populated. · .segAction: Populate the .seg Verification Facility ZIP+4 field with a five or nine digit numeric value when the .mpa Account Number field is populated.Error location: .seg4332There can be no characters after the .ccr Closing Character field.Remove all characters after the .ccr Closing Character field. · .ccrAction: Remove all characters after the .ccr Closing Character field.Error location: .ccr4335The .seg Verification Facility ZIP+4 field must be populated with the same value in all .seg records when the .mpa Account Number field is populated.Populate the .seg Verification Facility ZIP+4 field with the same value for all .seg records when the .mpa Account Number field is populated. · Multiple FilesAction: Populate the .seg Verification Facility ZIP+4 field with the same value for all .seg records when the .mpa Account Number field is populated.Error location: Multiple Files4349For MLOCR Mailings, the .cqt Rate Category field value provided was {1}; it must contain E= 5 Digit Barcode, G= 5 Digit, H = 3 Digit Barcode, K= 3 Digit, L2= MxAADC/Mixed BC, L6=MxADC/Mixed, L7= AADC/3D Machinable, L8= MxAADC/Mixed Machinable, or S= Single Piece when the .mpu Mail Piece Unit - Class field is populated with 3 = Standard Mail and the .mpu Mail Piece Unit - Processing Category field is populated with LT = Letters.Populate the .cqt Rate Category field with E, G, H, K, L2, L6, L7, L8, or S when the .mpu Mail Piece Unit - Class field is populated with 3 and the .mpu Mail Piece Unit - Processing Category field is populated with LT for MLOCR mailings. · .cqtAction: Populate the .cqt Rate Category field with E, G, H, K, L2, L6, L7, L8, or S when the .mpu Mail Piece Unit - Class field is populated with 3 and the .mpu Mail Piece Unit - Processing Category field is populated with LT for MLOCR mailings.Error location: .cqt4352Mail.dat version {1} may not be submitted with a Postage Statement Mailing Date before {2}.Do not attempt to submit a Mail.dat version {1} mailings with a .csm Postage Statement Mailing Date prior to {2}. · .csmAction: Do not attempt to submit a Mail.dat version {1} mailings with a .csm Postage Statement Mailing Date prior to {2}.Error location: .csm4353When the .mpa Account Number field is populated, the .mpa Mailer ID of Mail Owner or CRID of Mail Owner and the .mpa Mailer ID of Mail Preparer or CRID of Mail Preparer fields must be populated.Populate the .mpa Mailer ID of Mail Owner or CRID of Mail Owner and the .mpa Mailer ID of Mail Preparer or CRID of Mail Preparer fields when the .mpa Account Number field is populated. · .mpaAction: Populate the .mpa Mailer ID of Mail Owner or CRID of Mail Owner and the .mpa Mailer ID of Mail Preparer or CRID of Mail Preparer fields when the .mpa Account Number field is populated.Error location: .mpa4354The .mpu Mail Piece Unit – Rate Type field value provided was {1}; V = Election Mail is not supported.Populate the .mpu Mail Piece Unit – Rate Type field with a value other than V = Election Mail. · .mpuAction: Populate the .mpu Mail Piece Unit – Rate Type field with a value other than V = Election Mail.Error location: .mpu4355Mail.dat version {1} may not be submitted before {2}.Do not attempt to submit Mail.dat version {1} jobs before {2}. · Multiple FilesAction: Do not attempt to submit Mail.dat version {1} jobs before {2}.Error location: Multiple Files4359The .mpa Permit Number and Permit ZIP+4 of an Update submission must match the .mpa Permit Number and Permit ZIP+4 on the Original Job.Populate the .mpa Permit Number and Permit ZIP+4 fields for the update submission with the same values that were populated in the fields for the Original job. · .mpaAction: Populate the .mpa Permit Number and Permit ZIP+4 fields for the update submission with the same values that were populated in the fields for the Original job.Error location: .mpa4360The .mcr Additional Postage MPA ID field must be populated when the .mcr Primary MPA ID field is populated with a .mpa MPA – Unique Sequence/Grouping ID that has a .mpa Postage Payment method of M = Metered: Neither L = Metered: Lowest C = Metered: Correct or S = Stamp.Populate the .mcr Additional Postage MPA ID field when he .mcr Primary MPA ID field is populated with a .mpa MPA – Unique Sequence/Grouping ID that has a .mpa Postage Payment method of M, L, C or S. · Multiple FilesAction: Populate the .mcr Additional Postage MPA ID field when he .mcr Primary MPA ID field is populated with a .mpa MPA – Unique Sequence/Grouping ID that has a .mpa Postage Payment method of M, L, C or S.Error location: Multiple Files4361Date Data Type Error: When the .hdr Zone Matrix Date is populated, it must be a valid date formatted as YYYYMMDD (cannot be all zeros).Populate the .hdr Zone Matrix Date field with a valid date formatted as YYYYMMDD (cannot be all zeros) when populated. · .hdrAction: Populate the .hdr Zone Matrix Date field with a valid date formatted as YYYYMMDD (cannot be all zeros) when populated.Error location: .hdr4362When the .csm CSM Record Status is set to I in an Update job, the .csm Container ID must be unique from the original submission, duplicate Container ID {1}.Populate the .csm Container ID field with a unique value when the .csm CSR Record Status field is populated with I for an update job submission. · .csmAction: Populate the .csm Container ID field with a unique value when the .csm CSR Record Status field is populated with I for an update job submission.Error location: .csm4366Alphanumeric Data Type Error: Simplified Address Indicator must be an alphanumeric value in the .cqt file (when populated).Populate the .cqt Simplified Address Indicator field with an alphanumeric value when populated. · .cqtAction: Populate the .cqt Simplified Address Indicator field with an alphanumeric value when populated.Error location: .cqt4367The secondary .mcr Additional Postage MPA ID field must be populated with a value for permit type OI and the .mpa Postage Payment Method field must be populated with G = Gov’t – Fed (use Permit when the .mcr Primary MPA ID field is populated with a value for permit type OM and the .mpa Postage Payment Method field is populated with S = Stamp, L = Metered: Lowest, C = Metered: Correct or M = Metered: Neither. The value provided was {1}.Populate the secondary .mcr Additional Postage MPA ID field with a value for permit type OI and the .mpa Postage Payment Method field with G when the .mcr Primary MPA ID field is populated with a value for permit type OM and the .mpa Postage Payment Method field is populated with S, L, C or M. · .mpuAction: Populate the secondary .mcr Additional Postage MPA ID field with a value for permit type OI and the .mpa Postage Payment Method field with G when the .mcr Primary MPA ID field is populated with a value for permit type OM and the .mpa Postage Payment Method field is populated with S, L, C or M.Error location: .mpu4368Date Data Type Error: Presort Labeling List Effective Date must be a valid date formatted as YYYYMMDD in the .csm file..csmError location: .csm4370Date Data Type Error: Last Used Labeling List Effective Date must be a valid date formatted as YYYYMMDD in the .csm file..csmError location: .csm4372Date Data Type Error: Presort City-State Publication Date must be a valid date formatted as YYYYMMDD in the .csm file..csmError location: .csm4374Date Data Type Error: Last Used City-State Publication Date must be a valid date formatted as YYYYMMDD in the .csm file..csmError location: .csm4376Date Data Type Error: Presort Zone Chart Matrix Publication Date must be a valid date formatted as YYYYMMDD in the .csm file..csmError location: .csm4378Date Data Type Error: Last Used Zone Chart Matrix Publication Date must be a valid date formatted as YYYYMMDD in the .csm file..csmError location: .csm4380Date Data Type Error: Last Used Mail Direction Publication Date must be a valid date formatted as YYYYMMDD in the .csm file..csmError location: .csm4383The .csm Included in Other Documentation contains an invalid value; within an origin job, the .csm Included in Other Documentation field cannot contain both O and I..csmError location: .csm4384The .csm Included in Other Documentation contains an invalid value; in an origin job, the update cannot result in a mixture of O and I..csmError location: .csm4385Required Field Missing: Characteristic Type is a required field in the .ccr file..ccrError location: .ccr4386The .ccr Characteristic Type field contains an invalid value; it must contain A, C, I, or F..ccrError location: .ccr4389The .ccr Characteristic field contains an invalid value; it must contain CT, NF, DC, RT, RG, NP, SS, MT, VV, VP, PI, IV, OS, GS, PP, ME, CB, CP, CR, PM, MM, EB, EN, FA, CC, IT, 0X, FG, MG or 1X.Populate the .ccr Characteristic field with CT, NF, DC, RT, RG, NP, SS, MT, VV, VP, PI, IV, OS, GS, PP, ME, CB, CP, CR, EM, PM, 0X, 1X, FA, CC, IT, 0X, FG, MG or 1X. · .ccrAction: Populate the .ccr Characteristic field with CT, NF, DC, RT, RG, NP, SS, MT, VV, VP, PI, IV, OS, GS, PP, ME, CB, CP, CR, EM, PM, 0X, 1X, FA, CC, IT, 0X, FG, MG or 1X.Error location: .ccr4394Mail.dat original file submissions with .hdr Mail.dat Version {1} and submission date on or after {2} are not supported.Do not attempt to submit Mail.dat original file submissions with .hdr Mail.dat Version {1} and submission date on or after {2}. · Multiple FilesAction: Do not attempt to submit Mail.dat original file submissions with .hdr Mail.dat Version {1} and submission date on or after {2}.Error location: Multiple Files4395Mail.dat {1} file submissions with .csm Postage Statement Mailing Date on or after {2} are not supported.Do not attempt to submit Mail.dat {1} file submissions with .csm Postage Statement Mailing Date on or after {2}. · Multiple FilesAction: Do not attempt to submit Mail.dat {1} file submissions with .csm Postage Statement Mailing Date on or after {2}.Error location: Multiple Files4398When the .mpu Mail Piece Unit – Class is populated with 2 = Periodicals or 5 = Per Pending, the .mpa Account Number field can only be populated for .mpu Mail Piece Unit – Processing Category FL = Flat or LT = Letter.Remove the .mpa Account Number or change the .mpu Mail Piece Unit – Processing Category to FL for flat or LT for Letter. · .mpa .mpuAction: Remove the .mpa Account Number or change the .mpu Mail Piece Unit – Processing Category to FL for flat or LT for Letter.Error location: .mpa .mpu4399The .mpa Postage Payment Method contains an invalid value; it must contain S, P, L, C, M or G when the .ccr Characteristic claims Mobile Interactive Technology..mpa. .ccrError location: .mpa. .ccr4401The .mpu Mail Piece Unit – Processing Category contains an invalid value; it must contain CD, LT or FL when the .mpu Mail Piece Unit – Class is 1 and the .ccr Characteristic claims Mobile Interactive Technology..mpu .ccrError location: .mpu .ccr4402The .mpu Mail Piece Unit – Processing Category contains an invalid value; it must contain LT or FL when the .mpu Mail Piece Unit – Class is 3 and the .ccr Characteristic claims Mobile Interactive Technology.mpu .ccrError location: .mpu .ccr4403The .mpu Mail Piece Unit – Rate Type contains an invalid value; it must contain R or N when the .mpu Mail Piece Unit – Class is 3 and the .ccr Characteristic claims Mobile Interactive Technology..mpu .ccrError location: .mpu .ccr4406The .mpa Mail Owners Lcl Permit Ref Num/Intl Bill Num field must be Numeric to validate against the PostalOne! Permit data.Populate the .mpa Mail Owners Lcl Permit Ref Num/Intl Bill Num with a numeric value. · .mpaAction: Populate the .mpa Mail Owners Lcl Permit Ref Num/Intl Bill Num with a numeric value.Error location: .mpa4409The .seg Principal Processing Category must contain the same value as the .mpu Processing Category.Match the .seg Principal Processing Category with the same value as the .mpu Processing Category. · .seg .mpuAction: Match the .seg Principal Processing Category with the same value as the .mpu Processing Category.Error location: .seg .mpu4411The .seg eDoc Submitter CRID and Verification Zip+4 populated for the Consolidator Job does not match the .seg eDoc Submitter CRID and Verification Zip+4 populated for the origin job {1}.Populate the .seg eDoc Submitter CRID and Verification Zip+4 with the same values across the entire Copal Mailing. · .segAction: Populate the .seg eDoc Submitter CRID and Verification Zip+4 with the same values across the entire Copal Mailing.Error location: .seg4412For .hdr File Processing, the Presentation Category field is populated with an invalid value; when the Included in Other Documentation value for all Origin jobs is populated with O – Original Container, the .hdr Presentation Category cannot be populated with C – Consolidated Internal Copal.Update the .hdr Presentation Category to P or M so that the .hdr Presentation Category is consistent across all mailings in the copal. · .hdrAction: Update the .hdr Presentation Category to P or M so that the .hdr Presentation Category is consistent across all mailings in the copal.Error location: .hdr4413For .hdr File Processing, the Presentation Category field is populated with an invalid value; the .hdr Presentation Category must be populated with M – MLOCR or C – Consolidated Internal Copal when the included in Other Documentation value for Origin Mailings is populated with I = Internal Copal and the .hdr Presentation Category of the Origin Mailings is populated with P = Conventional Presort or M = MLOCR.Update the .hdr Presentation Category to M = MLOCR or C = Consolidated Internal Copal. · .hdrAction: Update the .hdr Presentation Category to M = MLOCR or C = Consolidated Internal Copal.Error location: .hdr4414For .hdr File Processing, the Presentation Category field is populated with an invalid value; the .hdr Presentation Category must be populated with C – Consolidated Internal Copal when the Included in Other Documentation value for Origin Mailings is populated with I – Internal Copal and the .hdr Presentation Categories of the Origin Mailings are populated with P – Conventional Presort and M – MLOCR.Update the .hdr Presentation Category to C – Consolidated Internal Copal. · .hdrAction: Update the .hdr Presentation Category to C – Consolidated Internal Copal.Error location: .hdr4417When at least one .mpa Payment Account Number is populated, the .mpa Permit ZIP+4 and .seg Verification Facility ZIP+4 must map to the same finance number for .mpa records which do not have the .mpa Account Number populated.Update the .mpa Permit ZIP+4 to one that maps to the same finance number as the Verification Facility ZIP+4 for all records without a .mpa Payment Account Number. · .mpa .segAction: Update the .mpa Permit ZIP+4 to one that maps to the same finance number as the Verification Facility ZIP+4 for all records without a .mpa Payment Account Number.Error location: .mpa .seg4418The .mpa Payment Account Number is not valid for the .mpa Permit Number, .mpa Permit ZIP +4, and permit type; when populated, the .mpa Payment Account Number must reference an active Account Number in the PostalOne! or EPS systems that is associated to the .mpa Permit Number, .mpa Permit ZIP +4, and permit type.Update the .mpa Payment Account Number to an active Account Number that is associated to the .mpa Permit Number, .mpa Permit ZIP+4, and permit type. · .mpa .segAction: Update the .mpa Payment Account Number to an active Account Number that is associated to the .mpa Permit Number, .mpa Permit ZIP+4, and permit type.Error location: .mpa .seg4423Within a mailing, the .mpa Permit ZIP+4 and the .seg Verification Facility ZIP+4 must all refer to test finance numbers or non-test finance numbers.Update the .mpa Permit ZIP+4 or the .seg Verification Facility ZIP+4 to use either all test finance or all non-test finance numbers across the mailing. · .mpa, .segAction: Update the .mpa Permit ZIP+4 or the .seg Verification Facility ZIP+4 to use either all test finance or all non-test finance numbers across the mailing.Error location: .mpa, .seg4425The value provided for the .mpu Standard Parcel Type was {1}; it must contain M = Marketing, F = Not a Marketing Parcel, or H = Heavy Printed Matter when populated.Populate the .mpu Standard Parcel Type with M, F, H, or remove. · .mpuAction: Populate the .mpu Standard Parcel Type with M, F, H, or remove.Error location: .mpu4426The value provided for the .cpt Standard Parcel Type was {1}; it must contain M = Marketing, F = Not a Marketing Parcel, or H = Heavy Printed Matter when populated.Populate the .cpt Standard Parcel Type with M, F, H, or remove. · .cptAction: Populate the .cpt Standard Parcel Type with M, F, H, or remove.Error location: .cpt4429The .cqt Simplified Address Indicator field provided was {1}; it must be blank = Not Simplified Address when the .mpu Mail Piece Unit – Class is populated with 3 = Standard Mail, .cqt Rate Category is D = Carrier Route, .mpu Mail Piece Unit – Weight is populated with a value less than 3.5 oz and the .csm Postage Statement Mailing Date is populated with a value on or after January 27, 2013.Remove the .cqt Simplified Address Indicator field. · .cptAction: Remove the .cqt Simplified Address Indicator field.Error location: .cpt4432For .hdr File Processing, the .hdr Presentation Category contains an invalid value; the .hdr Presentation Category cannot be populated with C = Consolidated Internal Copal Job with MLOCR and Conventional Presort or E = Consolidated External Copal Job with MLOCR and Conventional Presort when the Included In Other Documentation value is populated with I = Internal Copal or O = Original Container.Update the .hdr Presentation Category to a value other than C or E for Origin Copal Mailings. · .hdrAction: Update the .hdr Presentation Category to a value other than C or E for Origin Copal Mailings.Error location: .hdr4436A .pdr or .pbc file must be submitted for a Seamless Mailing.Please include a .pdr or .pbc file with your Seamless eDoc submission. · Multiple FilesAction: Please include a .pdr or .pbc file with your Seamless eDoc submission.Error location: Multiple Files4439For Seamless processing, the .pdr IM Barcode field must be populated with a 20, 25, 29, or 31 character value.Populate the .pdr IM Barcode field a 20, 25, 29, or 31 character value. · .pdrAction: Populate the .pdr IM Barcode field a 20, 25, 29, or 31 character value.Error location: .pdr4441For Seamless processing, the .pbc Barcode field must be populated with a 20, 25, 29, or 31 character value.Populate the .pbc Barcode field a 20, 25, 29, or 31 character value. · .pbcAction: Populate the .pbc Barcode field a 20, 25, 29, or 31 character value.Error location: .pbc4443For Seamless processing, the .csm Number of Pieces field is required when the .seg Logical/Physical Container Indicator field is populated with P = Physical Container. The value provided was {1}.Populate the .csm Number of Piece field when the .seg Logical/Physical Container Indicator field is populated with P. · .csmAction: Populate the .csm Number of Piece field when the .seg Logical/Physical Container Indicator field is populated with P.Error location: .csm4453For Seamless processing, the .csm USPS Pick Up field should be populated with Y – Yes or N – No when the .csm Container Status field is populated with R = Ready to pay or T = Transportation Information Update, and the container is not a sibling.Populate the .csm USPS Pick Up field with Y-Yes or N-No when the .csm Container Status field is populated with R or T, and the container is not a sibling. · .csmAction: Populate the .csm USPS Pick Up field with Y-Yes or N-No when the .csm Container Status field is populated with R or T, and the container is not a sibling.Error location: .csm4457For Seamless processing, the value provided for the .csm Entry Point for Entry Discount – Facility Type field was {1}; it cannot contain N = Not Determined when the .csm Container Status is populated with R = Ready to Pay.Populate the .csm Entry Point for Entry Discount – Facility Type field with a value other than N when the .csm Container Status field is populated with R. · .csmAction: Populate the .csm Entry Point for Entry Discount – Facility Type field with a value other than N when the .csm Container Status field is populated with R.Error location: .csm4463For Seamless processing, if populated, the .csm CSA Agreement ID field must be populated with a 10 digit numeric value between 1000000000 and 9999999999 when .csm Container Status field is populated with R = Ready to Pay.Populate the .csm CSA Agreement ID field with a 10 digit numeric value between 1000000000 and 9999999999 when .csm Container Status field is populated with R. · .csmAction: Populate the .csm CSA Agreement ID field with a 10 digit numeric value between 1000000000 and 9999999999 when .csm Container Status field is populated with R.Error location: .csm4465For Seamless processing, if populated, the .csm Reservation Number field must be populated with (1) a 10 digit value with the format nnnnn + R + mmdd (where n = numeric and mmdd = date of recurring appointment); (2) a 6 character value with the format nnnnn + R; or (3) a 9 digit numeric value between 100000000 and 999999999, when the .csm Container Status field is populated with R = Ready to Pay.Populate the .csm Reservation Number field with (1) a 10 digit value with the format nnnnn + R + mmdd (where n = numeric and mmdd = date of recurring appointment); (2) a 6 character value with the format nnnnn + R; or (3) a 9 digit numeric value between 100000000 and 999999999, when the .csm Container Status field is populated with R. · .csmAction: Populate the .csm Reservation Number field with (1) a 10 digit value with the format nnnnn + R + mmdd (where n = numeric and mmdd = date of recurring appointment); (2) a 6 character value with the format nnnnn + R; or (3) a 9 digit numeric value between 100000000 and 999999999, when the .csm Container Status field is populated with R.Error location: .csm4467For postage statement processing, only one Mailing Agent may be identified per job submission.Update the data to identify only one Mailing Agent.Action: Update the data to identify only one Mailing Agent.4469For Mail Anywhere, permit information pertaining to the .mpa Mail Owner’s Lcl Permit Ref Num field was entered for the .mpu Mail Piece Unit – Rate Type field populated with C = Classroom. The value provided was {1}.Populate .mpa Mail Owners Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type C. · .mpaAction: Populate .mpa Mail Owners Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type C.Error location: .mpa4470For Mail Anywhere, permit information pertaining to the .mpa Mail Owner’s Lcl Permit Ref Num field was entered for the .mpu Mail Piece Unit – Rate Type field populated with W = Science of Agriculture Limited Circulation. The value provided was {1}.Populate .mpa Mail Owners Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type W. · .mpaAction: Populate .mpa Mail Owners Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type W.Error location: .mpa4473For Mail Anywhere, permit information pertaining to the .mpa Mail Owner’s Lcl Permit Ref Num field was entered for the .mpu Mail Piece Unit – Rate Type field populated with Y = Regular Limited Circulation. The value provided was {1}.Populate .mpa Mail Owners Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type Y. · .mpaAction: Populate .mpa Mail Owners Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type Y.Error location: .mpa4476The .csm Sibling Container Reference ID field is required when the .csm Supplemental Physical Container ID field is populated, and the .csm Container Type is not populated with L = Logical Tray (MLOCR) or F = Flat Tub.Populate the .csm Sibling Container Reference ID field when the .csm Supplemental Physical Container ID field is populated, and the .csm Container Type is not populated with L = Logical Tray (MLOCR) or F = Flat Tub. · .csmAction: Populate the .csm Sibling Container Reference ID field when the .csm Supplemental Physical Container ID field is populated, and the .csm Container Type is not populated with L = Logical Tray (MLOCR) or F = Flat Tub.Error location: .csm4477The .csm Sibling Container Indicator field must be populated with Y = Yes when the .csm Supplemental Physical Container ID field is populated, and the .csm Container Type is not populated with L = Logical Tray (MLOCR) or F = Flat Tub.Populate the .csm Sibling Container Indicator field with Y = Yes when the .csm Supplemental Physical Container ID is populated, and the .csm Container Type is not populated with L = Logical Tray (MLOCR) or F = Flat Tub. · .csmAction: Populate the .csm Sibling Container Indicator field with Y = Yes when the .csm Supplemental Physical Container ID is populated, and the .csm Container Type is not populated with L = Logical Tray (MLOCR) or F = Flat Tub.Error location: .csm4478The .csm Supplemental Physical Container ID field must be populated with a Container ID that references a container with a .csm Container Type of M = Logical Pallet (MLOCR), P = Pallet, Z = User Pallet, H = EIRS 61 – Hamper, Large Canvas, A = EIRS 61P – Hamper, Large Plastic, G = EIRS 66 – General Purpose Mail Container w/Gate, D = EIRS 68 – Eastern Region Mail Container w/Web Door, R = EIRS 84 – Wire Container Rigid, C = EIRS 84C – Collapsible Wire Container, L = Logical Tray (MLOCR), or F = Flat Tub.Populate the .csm Supplemental Physical Container ID with a Container ID that references a container with a .csm Container Type of M = Logical Pallet (MLOCR), P = Pallet, Z = User Pallet, H = EIRS 61 – Hamper, Large Canvas, A = EIRS 61P – Hamper, Large Plastic, G = EIRS 66 – General Purpose Mail Container w/Gate, D = EIRS 68 – Eastern Region Mail Container w/Web Door, R = EIRS 84 – Wire Container Rigid, C = EIRS 84C – Collapsible Wire Container, L = Logical Tray (MLOCR), or F = Flat Tub. · .csmAction: Populate the .csm Supplemental Physical Container ID with a Container ID that references a container with a .csm Container Type of M = Logical Pallet (MLOCR), P = Pallet, Z = User Pallet, H = EIRS 61 – Hamper, Large Canvas, A = EIRS 61P – Hamper, Large Plastic, G = EIRS 66 – General Purpose Mail Container w/Gate, D = EIRS 68 – Eastern Region Mail Container w/Web Door, R = EIRS 84 – Wire Container Rigid, C = EIRS 84C – Collapsible Wire Container, L = Logical Tray (MLOCR), or F = Flat Tub.Error location: .csm4479An additional entry office could not be created. FinanceNo {1}, Crid {2}, PermitType {3}, PermitNo {4}, UserSeqNo {5}, ReturnCode {6}.PostalOne! Encountered internal errors while trying to create an additional entry office. Please contact PostalOne! Application support for assistance.Action: PostalOne! Encountered internal errors while trying to create an additional entry office. Please contact PostalOne! Application support for assistance.4485The Intelligent Mail Range .imr is not supported.Do not attempt to submit an Intelligent Mail Range .imr file. · .imrAction: Do not attempt to submit an Intelligent Mail Range .imr file.Error location: .imr4486For Mail Anywhere, permit information pertaining to the .mpa Mail Owner’s Lcl Permit Ref Num field was entered for the .mpu Mail Piece Unit – Rate Type field populated with S. S = Science of Agriculture. The value provided was {1}.Populate .mpa Mail Owners Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type S. · .mpaAction: Populate .mpa Mail Owners Lcl Permit Ref Num field with a value that maps to .mpu Mail Piece Unit – Rate Type S.Error location: .mpa4488For Mail Anywhere, a valid rate code for the .mpa Mail Owner’s Lcl Permit Ref Num field cannot be found. The value provided was {1}.Populate the .mpa Mail Owners Lcl Permit Ref Num field with a value that is associated to a valid rate code. · .mpaAction: Populate the .mpa Mail Owners Lcl Permit Ref Num field with a value that is associated to a valid rate code.Error location: .mpa4511Required Field Missing: Job ID is a required field in the .upa file.Populate the .upa Job ID field. · .upaAction: Populate the .upa Job ID field.Error location: .upa4512Required Field Missing: Piece ID is a required field in the .upa file.Populate the .upa Piece ID field. · .upaAction: Populate the .upa Piece ID field.Error location: .upa4513Referential Integrity Error: There cannot be duplicate primary keys in the .upa file (Job ID and Piece ID).Populate the .upa Job ID and Piece ID fields with unique values in the .upa file. · .upaAction: Populate the .upa Job ID and Piece ID fields with unique values in the .upa file.Error location: .upa4514The value provided for the .upa UPA Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .upa Record Status field with O, D, I, or U. · .upaAction: Populate the .upa Record Status field with O, D, I, or U.Error location: .upa4515The .upa UPA Record Status field does not match the .hdr Un-Coded Parcel Address Record Status.Populate the .upa UPA Record Status field with the same value that is populated in the .hdr Un-Coded Parcel Address Record Status field. · .upaAction: Populate the .upa UPA Record Status field with the same value that is populated in the .hdr Un-Coded Parcel Address Record Status field.Error location: .upa4516The .hdr Un-Coded Parcel Address Record Count field must match the Record Count of the Un-Coded Parcel Address File.Populate the Un-Coded Parcel Address Record Count field with a value that is equal to the Record Count of the Un-Coded Parcel Address file. · .upaAction: Populate the Un-Coded Parcel Address Record Count field with a value that is equal to the Record Count of the Un-Coded Parcel Address file.Error location: .upa4517There can be no characters after the .upa Closing Character field.Remove all characters after the .upa Closing Character field. · .upaAction: Remove all characters after the .upa Closing Character field.Error location: .upa4518The .upa Closing Character value provided was {1}; it must contain # sign.Populate the .upa Closing Character field with #. · .upaAction: Populate the .upa Closing Character field with #.Error location: .upa4519The .upa Address field must be populated with an alphanumeric value.Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 “ASCII Symbols Allowed. · .upaAction: Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 “ASCII Symbols Allowed.Error location: .upa4520The .upa Job ID field does not match the .hdr Job ID field.Populate the .upa Job ID field with the same value that is populated in the .hdr Job ID field. · .upaAction: Populate the .upa Job ID field with the same value that is populated in the .hdr Job ID field.Error location: .upa4532For {%1}, the number of barcodes populated must be greater than {%2} percent threshold, or apply the Package Quality Noncompliance Fee via the .sfr file. The current percentage is {%3}.Populate the .pdr IM Barcode or include the Package Quality Noncompliance Fee in the .sfr file. · .pdrAction: Populate the .pdr IM Barcode or include the Package Quality Noncompliance Fee in the .sfr file.Error location: .pdr4546Referential Integrity Error: The .csm Supplemental Physical Container ID does not have a matching .csm Container ID.Populate the .csm Supplemental Physical Container ID with a value that matches a .csm Container ID. · .csmAction: Populate the .csm Supplemental Physical Container ID with a value that matches a .csm Container ID.Error location: .csm4549For Periodical mailings, containers with container type M = Logical Pallet (MLOCR) must be referenced by a physical sibling, when the .csm Container Status is populated with R = Ready to Pay.Populate the .csm Sibling Container Reference ID field for a physical sibling when the .csm Container Type field is populated with M. · .csmAction: Populate the .csm Sibling Container Reference ID field for a physical sibling when the .csm Container Type field is populated with M.Error location: .csm4550The Container ID in the .csm file, with a .csm Container Type of L = Logical Tray (MLOCR) or F = Flat Tub, which has the .csm Supplemental Physical Container ID populated, must have a corresponding Container ID in the .cqt file.Populate the .cqt Container ID field, with the corresponding .csm Container ID, when the .csm Supplemental Physical Container ID is populated. · .cqtAction: Populate the .cqt Container ID field, with the corresponding .csm Container ID, when the .csm Supplemental Physical Container ID is populated.Error location: .cqt4553For Periodical mailings, containers with container type V = Sack (Virtual) not marked for co-palletization, must be referenced by a physical sibling, when the .csm Container Status is populated with populated with R = Ready to Pay.Populate the .csm Sibling Container Reference ID field for a physical sibling when the .csm Container Type field is populated with V. · .csmAction: Populate the .csm Sibling Container Reference ID field for a physical sibling when the .csm Container Type field is populated with V.Error location: .csm4554The .csm Supplemental Physical Container ID field must be populated with a Container ID that references a container with a .csm Container Type of L = Logical Tray (MLOCR), when the .hdr Mail.dat Presentation Category is set to M = MLOCR, .mpu Mail Piece Unit Class is set to 1 = First Class or 3 = Standard, and .mpu Mail Piece Unit – Processing Category is set to FL = Flats.Populate the .csm Supplemental Physical Container ID with a Container ID that references a container with a .csm Container Type of L = Logical Tray (MLOCR) for MLOCR. · .csmAction: Populate the .csm Supplemental Physical Container ID with a Container ID that references a container with a .csm Container Type of L = Logical Tray (MLOCR) for MLOCR.Error location: .csm4556The .pdr Impb Barcode Construct Code provided was {1}. The .pdr Impb Barcode Construct Code must be populated with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable.Populate the .pdr Impb Barcode Construct Code with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable. · .pdrAction: Populate the .pdr Impb Barcode Construct Code with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable.Error location: .pdr4557The .pbc Impb Barcode Construct Code provided was {1}. The .pbc Impb Barcode Construct Code must be populated with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable.Populate the .pbc Impb Barcode Construct Code with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable. · .pbcAction: Populate the .pbc Impb Barcode Construct Code with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable.Error location: .pbc4558The .seg FCM Letter Residual Preparation Indicator provided was {1}. It must contain M = Mixed when populated.Populate the .seg FCM Letter Residual Preparation Indicator with M = Mixed when populated. · .segAction: Populate the .seg FCM Letter Residual Preparation Indicator with M = Mixed when populated.Error location: .seg4559The .mpa Postage Payment Method must contain G = Gov’t – Fed or P = Permit when the .mpu Mail Piece Unit – Class is 1 = First Class, the .mpu Mail Piece Unit – Processing Category is FL = Flats, LT = Letters, PF = Parcel, First Class, and the .hdr Mail.dat Presentation Category is N = Single Piece.Populate the .mpa Postage Payment Method with G = Gov’t – Fed or P = Permit. · .mpaAction: Populate the .mpa Postage Payment Method with G = Gov’t – Fed or P = Permit.Error location: .mpa4562For Full-Service or Mixed Service mailings, physical sibling container information is required for Postage Statement finalization, when the .csm Container Type is set to L = Logical Tray (MLOCR) or M = Logical Pallet (MLOCR), .hdr Mail.dat Presentation Category is set to P = Conventional Presort, and .csm Container Status is set to R = Ready to Pay.Populate the .csm Sibling Container Reference ID on a physical container, with a Container ID that references a container with a .csm Container Type of L = Logical Tray (MLOCR) or M = Logical Pallet (MLOCR). · .csmAction: Populate the .csm Sibling Container Reference ID on a physical container, with a Container ID that references a container with a .csm Container Type of L = Logical Tray (MLOCR) or M = Logical Pallet (MLOCR).Error location: .csm4568The .cqt Simplified Address Indicator field value provided was {1}; the Business Only Delivery Option on Carrier Routes is not supported.A .cqt Simplified Address Indicator of B = EDDM Business-only for Business Only Delivery Carrier Route is not supported. · .cqtAction: A .cqt Simplified Address Indicator of B = EDDM Business-only for Business Only Delivery Carrier Route is not supported.Error location: .cqt4569For update submissions to a Simple Mailing, the .pdr IM Barcode Mailer ID and Serial Number combination must all match the original submission’s .pdr IM Barcode Mailer ID and Serial number combination.Update the Mailer ID and Serial number portion of the .pdr IM Barcode to match the original submission. · .pdrAction: Update the Mailer ID and Serial number portion of the .pdr IM Barcode to match the original submission.Error location: .pdr4570For update submissions to a Simple Mailing, the .pbc Barcode Mailer ID and Serial number combination must all match the original submission’s .pbc Barcode Mailer ID and Serial number combination.Update the Mailer ID and Serial number portion of the .pbc Barcode to match the original submission. · ,pbcAction: Update the Mailer ID and Serial number portion of the .pbc Barcode to match the original submission.Error location: ,pbc4571Job ID is a required field in the .sfr file.Populate the .sfr Job ID field. · .sfrAction: Populate the .sfr Job ID field.Error location: .sfr4572Service Type is a required field in the .sfr file.Populate the .sfr Service Type field. · .sfrAction: Populate the .sfr Service Type field.Error location: .sfr4573CQT Database ID is a required field in the .sfr file.Populate the .sfr CQT Database ID field. · .sfrAction: Populate the .sfr CQT Database ID field.Error location: .sfr4574Piece ID is a required field in the .sfr file.Populate the .sfr Piece ID field. · .sfrAction: Populate the .sfr Piece ID field.Error location: .sfr4576Special Fees/Charges Services ID is a required field in the .sfr file.Populate the .sfr Special Fees/Charges Services ID field. · .sfrAction: Populate the .sfr Special Fees/Charges Services ID field.Error location: .sfr4577The value provided for the .sfr SFR Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert or U = Update.Populate the .sfr SFR Record Status field. · .sfrAction: Populate the .sfr SFR Record Status field.Error location: .sfr4578Referential Integrity Error: There cannot be duplicate primary keys in the .sfr file (CQT Database ID, Job ID, Piece ID, and Service Type).Populate the .sfr CQT Database ID, Job ID, Piece ID, and Service Type field with unique values in the .sfr file. · .sfrAction: Populate the .sfr CQT Database ID, Job ID, Piece ID, and Service Type field with unique values in the .sfr file.Error location: .sfr4579The .sfr SFR Record Status field does not match the .hdr Special Fees/Charge File Status field.Populate the .sfr SFR Record Status field with the same value that is populated in the .hdr Special Fees/Charge File Status field. · .sfrAction: Populate the .sfr SFR Record Status field with the same value that is populated in the .hdr Special Fees/Charge File Status field.Error location: .sfr4580The .hdr Special Fees/Charge Record Count field must match the Record Count of the Special Fees/Charge File.Populate the Special Fees/Charge Record Count field with a value that is equal to the Record Count of the Special Fees/Charge File. · .sfrAction: Populate the Special Fees/Charge Record Count field with a value that is equal to the Record Count of the Special Fees/Charge File.Error location: .sfr4581There can be no characters after the .sfr Closing Character field.Remove all characters after the .sfr Closing Character field. · .sfrAction: Remove all characters after the .sfr Closing Character field.Error location: .sfr4582The .sfr Closing Character value provided was {1}; it must contain # sign.Populate the .sfr Closing Character field with #. · .sfrAction: Populate the .sfr Closing Character field with #.Error location: .sfr4583The .sfr Service Type field must be populated with an alphanumeric value.Populate the .sfr Service Type field with an alphanumeric value. · .sfrAction: Populate the .sfr Service Type field with an alphanumeric value.Error location: .sfr4584The .sfr Special Fees/Charges Services ID field must be populated with an alphanumeric value.Populate the .sfr Special Fees/Charges Services ID field with an alphanumeric value. · .sfrAction: Populate the .sfr Special Fees/Charges Services ID field with an alphanumeric value.Error location: .sfr4586The .sfr Record Status field must be populated with an alphanumeric value.Populate the .sfr Record Status field with an alphanumeric value. · .sfrAction: Populate the .sfr Record Status field with an alphanumeric value.Error location: .sfr4587The .sfr Service Stated Value field must be populated with a numeric value.Populate the .sfr Service Stated Value field with a numeric value. · .sfrAction: Populate the .sfr Service Stated Value field with a numeric value.Error location: .sfr4588The .sfr Service Fee field must be populated with a numeric value.Populate the .sfr Service Fee field with a numeric value. · .sfrAction: Populate the .sfr Service Fee field with a numeric value.Error location: .sfr4589The .sfr Amount Due field must be populated with a numeric value.Populate the .sfr Amount Due field with a numeric value. · .sfrAction: Populate the .sfr Amount Due field with a numeric value.Error location: .sfr4590No more than 5 extra services can be claimed for a single .sfr Piece IDClaim no more than 5 extra services per .sfr Piece ID. · .sfrAction: Claim no more than 5 extra services per .sfr Piece ID.Error location: .sfr4591The .sfr Job ID field does not match the .hdr Job ID field.Populate the .sfr Job ID field with the same value that is populated in the .hdr Job ID field. · .sfrAction: Populate the .sfr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: .sfr4592A container with .csm Container Type of L = Logical Tray (MLOCR), which has the .csm Supplemental Physical Container ID populated, must be referenced in the .csm Sibling Container Reference ID field, by a Sibling Container with the .csm Container Type of F = Flat Tub, when the .mpu Mail Piece Unit – Class is populated with 1 = First Class or 3 = Standard, and the .mpu Mail Piece Unit Processing Category is populated with FL = Flats.Populate the .csm Container Type with F = Flat Tub, for the physical sibling container of the Logical Tray, when the .csm Supplemental Physical Container ID is populated on the Logical Tray, when the .mpu Mail Piece Unit – Class is populated with 1 = First Class or 3 = Standard, and the .mpu Mail Piece Unit – Processing Category is populated with FL = Flats. · .csmAction: Populate the .csm Container Type with F = Flat Tub, for the physical sibling container of the Logical Tray, when the .csm Supplemental Physical Container ID is populated on the Logical Tray, when the .mpu Mail Piece Unit – Class is populated with 1 = First Class or 3 = Standard, and the .mpu Mail Piece Unit – Processing Category is populated with FL = Flats.Error location: .csm4595For Package Services, .pqt Number of Copies can only be greater than the .pqt Number of Pieces when the .mpu Mail Piece Unit – Class is 4, the .mpu Mail Piece Unit – Rate Type is B = Bound Printed Matter and at least one .pqt Package Level record is populated with S = Multi-PC Parcel.Populate the .pqt Package Level with S = Multi-PC Parcel when the .mpu Mail Piece Unit – Class is 4 = Pkg Services, the .mpu Mail Piece Unit – Rate Type is B = Bound Printed Matter and the .pqt Number of Copies is greater than the .pqt Number of Pieces. · Multiple FilesAction: Populate the .pqt Package Level with S = Multi-PC Parcel when the .mpu Mail Piece Unit – Class is 4 = Pkg Services, the .mpu Mail Piece Unit – Rate Type is B = Bound Printed Matter and the .pqt Number of Copies is greater than the .pqt Number of Pieces.Error location: Multiple Files4596An .sfr file can only be submitted when the .mpu Mail Piece Unit – Class is 1 = First Class, 3 = Std Mail, 4 = Pkg Services, or the .hdr Mail.dat Presentation Category is N = Single Piece (representing Priority Mail).Populate the .mpu Mail Piece Unit – Class with 4 = Pkg Services, 1 = First Class, 3 = Std Mail, or populate the .hdr Mail.dat Presentation Category with N = Single Piece (representing Priority Mail). · MultipleAction: Populate the .mpu Mail Piece Unit – Class with 4 = Pkg Services, 1 = First Class, 3 = Std Mail, or populate the .hdr Mail.dat Presentation Category with N = Single Piece (representing Priority Mail).Error location: Multiple4601For Periodical mailings, containers with container type L = Logical Tray (MLOCR) must be referenced by a physical sibling, when the .csm Container Status is populated with R = Ready to Pay.Populate the .csm Sibling Container Reference ID field for a physical sibling when the .csm Container Type field is populated with L. · .csmAction: Populate the .csm Sibling Container Reference ID field for a physical sibling when the .csm Container Type field is populated with L.Error location: .csm4602Logical trays that do not have .cqt records must be referenced in the .csm Supplemental Physical Container ID of a logical tray that does have .cqt records.Populate the. .csm Supplemental Physical Container ID of a logical tray that does have .cqt records with the Container ID of a logical tray that does not have .cqt records. · .csmAction: Populate the. .csm Supplemental Physical Container ID of a logical tray that does have .cqt records with the Container ID of a logical tray that does not have .cqt records.Error location: .csm4603Physical trays that do not have .cqt records must be referenced in the .csm Supplemental Physical Container ID of a physical tray that does have .cqt records.Populate the .csm Supplemental Physical Container ID of a physical tray that does have .cqt records with the Container ID of a physical tray that does not have .cqt records. · .csmAction: Populate the .csm Supplemental Physical Container ID of a physical tray that does have .cqt records with the Container ID of a physical tray that does not have .cqt records.Error location: .csm4605For simple Full-Service mailings, the .csm eInduction Indicator cannot be populated when csm Label: IM Container Or IM Tray field is not populated.Remove the .csm eInduction indicator or populate the csm Label: IM Container Or IM Tray field. · .csmAction: Remove the .csm eInduction indicator or populate the csm Label: IM Container Or IM Tray field.Error location: .csm4609For .hdr File Processing, the Presentation Category field is populated with an invalid value; when the Included in Other Documentation value for all Origin jobs is populated with I = Internal co-palletization indicator from the Origin Job, the .hdr Presentation Category cannot be populated with E = Consolidated External Copal.Update the .hdr Presentation Category to P or M so that the .hdr Presentation Category is consistent across all mailings in the copal. · .hdrAction: Update the .hdr Presentation Category to P or M so that the .hdr Presentation Category is consistent across all mailings in the copal.Error location: .hdr4610For .hdr File Processing, the Presentation Category field is populated with an invalid value; the .hdr Presentation Category must be populated with M = MLOCR or E = Consolidated External Copal when the Included in Other Documentation value for Origin Mailings is populated with O = Original Container and the .hdr Presentation Category of the Origin Mailings is populated with P = Conventional Presort or M = MLOCR.Update the .hdr Presentation Category to M = MLOCR or E = Consolidated External Copal. · .hdrAction: Update the .hdr Presentation Category to M = MLOCR or E = Consolidated External Copal.Error location: .hdr4611The .mpu Mail Piece Unit - Rate Type provided was {1}. The .mpu Mail Piece Unit - Rate Type must be T = Priority, E = Priority Mail Flat Rate Envelopes (12-1/2" x 9-1/2" or smaller), E1 = Priority Mail Legal Flat Rate Envelope, E2 = Priority Mail Padded Flat Rate Envelope, E7 = Priority Mail Medium Flat Rate Box, E8 = Priority Mail Critical Mail, E9 = Priority Mail Critical Mail - with Signature, G = Priority Mail Flat (fixed) - Rate Box, J = Priority Mail Flat - Large Box, O = Priority Mail Small Flat-Rate Box, K = Priority Mail Flat - Large Box APO/FPO, T1 = Priority Mail Cubic - Tier 1, T2 = Priority Mail Cubic - Tier 2, T3 = Priority Mail Cubic - Tier 3, T4 = Priority Mail Cubic - Tier 4 or T5 = Priority Mail Cubic - Tier 5 when the .mpu Mail Piece Unit - Class is 1 = First Class and the .hdr Mail.dat Presentation Category is N = Single Piece.Populate the .mpu Mail Piece Unit - Rate Type with T = Priority, E = Priority Mail Flat Rate Envelopes (12-1/2" x 9- 1/2" or smaller), E1 = Priority Mail Legal Flat Rate Envelope, E2 = Priority Mail Padded Flat Rate Envelope, E7 = Priority Mail Medium Flat Rate Box, E8 = Priority Mail Critical Mail, E9 = Priority Mail Critical Mail - with Signature, G = Priority Mail Flat (fixed) - Rate Box, J = Priority Mail Flat - Large Box, O = Priority Mail Small Flat-Rate Box, K = Priority Mail Flat - Large Box APO/FPO, T1 = Priority Mail Cubic - Tier 1, T2 = Priority Mail Cubic - Tier 2, T3 = Priority Mail Cubic - Tier 3, T4 = Priority Mail Cubic - Tier 4 or T5 = Priority Mail Cubic - Tier 5. · .mpuAction: Populate the .mpu Mail Piece Unit - Rate Type with T = Priority, E = Priority Mail Flat Rate Envelopes (12-1/2" x 9- 1/2" or smaller), E1 = Priority Mail Legal Flat Rate Envelope, E2 = Priority Mail Padded Flat Rate Envelope, E7 = Priority Mail Medium Flat Rate Box, E8 = Priority Mail Critical Mail, E9 = Priority Mail Critical Mail - with Signature, G = Priority Mail Flat (fixed) - Rate Box, J = Priority Mail Flat - Large Box, O = Priority Mail Small Flat-Rate Box, K = Priority Mail Flat - Large Box APO/FPO, T1 = Priority Mail Cubic - Tier 1, T2 = Priority Mail Cubic - Tier 2, T3 = Priority Mail Cubic - Tier 3, T4 = Priority Mail Cubic - Tier 4 or T5 = Priority Mail Cubic - Tier 5.Error location: .mpu4612The .hdr Mail.dat Presentation Category field value provided was {1}; it must contain N = Single Piece, when the .mpu Mail Piece Unit - Class field is populated with 1 = First Class, and the .mpu Mail Piece Unit - Rate Type field value is E, E1, E2, E7, E8, E9, J, O, K, T, T1, T2, T3, T4, or T5.Populate the .hdr Mail.dat Presentation Category field with N, when the .mpu Mail Piece Unit - Class field is populated 1, and the .mpu Mail Piece Unit - Rate Type field with E, E1, E2, E7, E8, E9, J, O, K, T, T1, T2, T3, T4, or T5. · MultipleAction: Populate the .hdr Mail.dat Presentation Category field with N, when the .mpu Mail Piece Unit - Class field is populated 1, and the .mpu Mail Piece Unit - Rate Type field with E, E1, E2, E7, E8, E9, J, O, K, T, T1, T2, T3, T4, or T5.Error location: Multiple4613The .hdr Mail.dat Presentation Category field value provided was {1}; it must contain N = Single Piece, when the .cpt Component - Class field is populated with 1 = First Class, and the .cpt Component Rate Type field value is be E, E1, E2, E7, E8, E9, J, O, K, T, T1, T2, T3, T4, or T5.Populate the .hdr Mail.dat Presentation Category field with N, when the .cpt Component - Class field is populated with 1 = First Class, and the .cpt Component Rate Type field with E, E1, E2, E7, E8, E9, J, O, K, T, T1, T2, T3, T4, or T5. · .hdrAction: Populate the .hdr Mail.dat Presentation Category field with N, when the .cpt Component - Class field is populated with 1 = First Class, and the .cpt Component Rate Type field with E, E1, E2, E7, E8, E9, J, O, K, T, T1, T2, T3, T4, or T5.Error location: .hdr4614When the .mpa Postage Payment Method is populated with G = Government, the .ccr Characteristic cannot be populated with either EM or PM.Populate the .mpa Postage Payment Method with method other than G = Government when claiming Election or Political Mail. · .mpaAction: Populate the .mpa Postage Payment Method with method other than G = Government when claiming Election or Political Mail.Error location: .mpa4615The .cqt Destination Entry was {1}. When the .csm Entry Point for Entry Discount – Facility Type is H = Tran Hub, the .cqt Destination Entry must be S = DSCF or H = DHUB for the corresponding Container ID.Populate all .cqt records with Destination Entry of S = DSCF or H = DHUB when the container ID is identified as having a .csm Entry Point for Entry Discount – Facility Type of H = Tran Hub. · .cqtAction: Populate all .cqt records with Destination Entry of S = DSCF or H = DHUB when the container ID is identified as having a .csm Entry Point for Entry Discount – Facility Type of H = Tran Hub.Error location: .cqt4616Required Field Missing: CQT Database ID is a required field in the .upa file.Populate the .upa CQT Database ID field. · .upaAction: Populate the .upa CQT Database ID field.Error location: .upa4617Numeric Data Type Error: The .upa CQT Database ID field must be populated with a numeric value.Populate the .upa CQT Database ID field with a numeric value. · .upaAction: Populate the .upa CQT Database ID field with a numeric value.Error location: .upa4619The .pbc Record Status must be populated with I = Insert when adding new information to an existing job submission.Populate the .pbc Record Status with I = Insert. · .pbcAction: Populate the .pbc Record Status with I = Insert.Error location: .pbc4621The .csm Container Type {1} must include a .cqt record unless it is referenced as a Parent Container Reference ID, Sibling Container Reference ID, or a Supplemental Physical Container ID.Include a .cqt record for .csm Container Type {1}, or reference it in another container’s Parent Container Reference ID, Sibling Container Reference ID, or Supplemental Physical Container ID field. · .csmAction: Include a .cqt record for .csm Container Type {1}, or reference it in another container’s Parent Container Reference ID, Sibling Container Reference ID, or Supplemental Physical Container ID field.Error location: .csm4623The .ccr Characteristic was {1}. When the .mpu Mail Piece Unit – Class is 1 = First Class, the .hdr Mail.dat Presentation Category is N = Single Piece, and the .ccr Characteristic Type is F = Fee, the .ccr Characteristic must contain CB = Certificate of Bulk Mailing.Populate the .ccr Characteristic with CB = Certificate of Bulk Mailing. · .ccrAction: Populate the .ccr Characteristic with CB = Certificate of Bulk Mailing.Error location: .ccr4624The .mpu Mail Piece Unit – Weight provided was {1}. The .mpu Mail Piece Unit – Weight must be less than or equal to 20 pounds when the .mpu Mail Piece Unit – Class is 1 = First Class, the .mpu Mail Piece Unit – Processing Category is FL = Flats or PF = Parcels, First Class, the .hdr Mail.dat Presentation Category is N = Single Piece, and the .mpu Mail Piece Unit – Rate Type is T1, T2, T3, T4, or T5.Populate the .mpu Mail Piece Unit – Weight with a value less than or equal to 20 pounds. · .mpuAction: Populate the .mpu Mail Piece Unit – Weight with a value less than or equal to 20 pounds.Error location: .mpu4632The .pbc Barcode field was populated with an Impb. Imps may only be submitted via a .pdr file using the .pdr IM Barcode field.Submit Impb via the .pdr IM Barcode field. · .pdrAction: Submit Impb via the .pdr IM Barcode field.Error location: .pdr4633The .mpu Mail Piece Unit – Processing Category field contains an invalid value; it must container LT = Letter, FL = Flat or PF = Parcel when the .mpu Mail Piece Unit – Class field is populated with 1= First Class and the .hdr Mail.dat Presentation Category field is populated with N = Single Piece.Populate .mpu Mail Piece Unit – Processing Category field with FL = Flats, LT = Letters, or PF = Parcel, First Class when the .mpu Mail Piece Unit – Class field is 1, and the .hdr Mail.dat Presentation Category field is N. · .mpuAction: Populate .mpu Mail Piece Unit – Processing Category field with FL = Flats, LT = Letters, or PF = Parcel, First Class when the .mpu Mail Piece Unit – Class field is 1, and the .hdr Mail.dat Presentation Category field is N.Error location: .mpu4634The .cpt Component - Rate Type provided was {1}. The .cpt Component - Rate Type must be E, E1, E2, E7, J, O, K, T, T1, T2, T3, T4, or T5 when the .cpt Component - Class is 1 = First Class and the .hdr Mail.dat Presentation Category is N = Single Piece.Populate the .cpt Component - Rate Type with E, E1, E2, E7, J, O, K, T, T1, T2, T3, T4, or T5. · .cptAction: Populate the .cpt Component - Rate Type with E, E1, E2, E7, J, O, K, T, T1, T2, T3, T4, or T5.Error location: .cpt4636The Piece Barcode Record .pbc is not supported, when the .mpu Mail Piece Unit – Class field is populated with 1 = First Class, the .mpu Mail Piece Unit – Processing Category field is populated with PF = Parcel, First Class and the .hdr Mail.dat Presentation Category field is populated with N = Single Piece.Do not attempt to submit a Piece Barcode Record .pbc file, when the .mpu Mail Piece Unit – Class field is 1 = First Class, the .mpu Mail Piece Unit – Processing Category field is PF = Parcel, First Class and the .hdr Mail.dat Presentation Category field is N = Single Piece. · .pbcAction: Do not attempt to submit a Piece Barcode Record .pbc file, when the .mpu Mail Piece Unit – Class field is 1 = First Class, the .mpu Mail Piece Unit – Processing Category field is PF = Parcel, First Class and the .hdr Mail.dat Presentation Category field is N = Single Piece.Error location: .pbc4637When the .mpu MPU Surcharge field is populated with D = Dim Weight-Rectangular or T = Dim Weight-Non-Rectangular, the .mpu Mail Piece Unit – Length, .mpu Mail Piece Unit – Width, and .mpu Mail Piece Unit – Thickness fields must all be populated.Populate the .mpu Mail Piece Unit – Length, .mpu Mail Piece Unit – Width, and .mpu Mail Piece Unit – Thickness fields when claiming an .mpu MPU Surcharge of D = Dim Weight-Rectangular, or T = Dim Weight-Non-Rectangular. · .mpuAction: Populate the .mpu Mail Piece Unit – Length, .mpu Mail Piece Unit – Width, and .mpu Mail Piece Unit – Thickness fields when claiming an .mpu MPU Surcharge of D = Dim Weight-Rectangular, or T = Dim Weight-Non-Rectangular.Error location: .mpu4638The .pdr Impb Barcode Construct Code must be populated when an Impb is used in the .pdr IM Barcode field.Populate the .pdr Impb Barcode Construct Code with a valid Impb Barcode Construct Code type. · .pdrAction: Populate the .pdr Impb Barcode Construct Code with a valid Impb Barcode Construct Code type.Error location: .pdr4639The .pdr IM Barcode field must be populated with a valid Impb when the .pdr Impb Barcode Construct Code is populated.Populate the .pdr IM Barcode field with a valid Impb. · .pdrAction: Populate the .pdr IM Barcode field with a valid Impb.Error location: .pdr4643A container can only have a single sibling container when the .csm Container Type is AB = Air Box. Container ID {1} has more than one sibling container.Update the data such that each Air Box only has a single Sibling Container. · .csmAction: Update the data such that each Air Box only has a single Sibling Container.Error location: .csm4644When a container uses the .csm Container Type of AB = Air Box, the .seg Logical/Physical Container Indicator must be populated with P = Physical Container.Update the .seg Logical/Physical Container Indicator to P = Physical Container when using Air Boxes. · .segAction: Update the .seg Logical/Physical Container Indicator to P = Physical Container when using Air Boxes.Error location: .seg4645Only Priority, First Class, and USPS Marketing Mail postage statements with .mpu Mail Piece Unit – Processing Category of LT = Letters, FL = Flats, or CD = Cards may claim a .ccr Characteristic of PM = Political Mail, EB = Election Mail - Official Ballots or EN = Election Mail – Non-Ballot Materials.Submit a Priority, First Class, or USPS Marketing Mail postage statement with .mpu Mail Piece Unit – Processing Category of LT = Letters, FL = Flats, or CD = Cards to claim a .ccr Characteristic of PM = Political Mail, EB = Election Mail - Official Ballots or EN = Election Mail – Non-Ballot Materials. · .mpuAction: Submit a Priority, First Class, or USPS Marketing Mail postage statement with .mpu Mail Piece Unit – Processing Category of LT = Letters, FL = Flats, or CD = Cards to claim a .ccr Characteristic of PM = Political Mail, EB = Election Mail - Official Ballots or EN = Election Mail – Non-Ballot Materials.Error location: .mpu4646The .mpu Postage Affixed Type must be blank when the .mpa Postage Payment Method is populated with P = Permit.Do not populate the .mpu Postage Affixed Type. · .mpuAction: Do not populate the .mpu Postage Affixed Type.Error location: .mpu4647The .seg Container and Bundle Charge Method field value provided was {1}; it must contain 1 (Charge all to a 3rd party), 2 (Charge all to one of the publications), or 3 (proportion by copies to each of the publications) when the .seg Class Defining Preparation field is populated with 2 = Periodicals.Populate the .seg Container and Bundle Charge Method field with 1, 2, or 3 when the .seg Class Defining Preparation field is populated with 2 = Periodicals. · .segAction: Populate the .seg Container and Bundle Charge Method field with 1, 2, or 3 when the .seg Class Defining Preparation field is populated with 2 = Periodicals.Error location: .seg4648The .seg eDoc Sender CRID must be the same across all records within the .seg file.Populate the .seg eDoc Sender CRID will the same value across all records within the .seg file. · .segAction: Populate the .seg eDoc Sender CRID will the same value across all records within the .seg file.Error location: .seg4650The .cqt Service Level Indicator cannot be populated with F = Full-Service, when the .seg Segment ID associated to the piece has the Detached Mailing Label Indicator populated with A = Detached Address Label.Full-Service pieces are not eligible to claim DAL lines. · .cqtAction: Full-Service pieces are not eligible to claim DAL lines.Error location: .cqt4651Referential Integrity Error: The total number of copies from all .pdr/.pbc records must equal the .cqt Number of Copies for the corresponding CQT DB ID {1}.Correct the .pdr/.pbc records to match the .cqt Number of Copies for the corresponding CQT DB ID. · Multiple filesAction: Correct the .pdr/.pbc records to match the .cqt Number of Copies for the corresponding CQT DB ID.Error location: Multiple files4666When the .cpt Periodical Ad% ZZZZZreatment is populated with B or S the Ad % Basis must be populated with a value greater than zero.Populate the Ad % Basis with a value greater than zero. · .cptAction: Populate the Ad % Basis with a value greater than zero.Error location: .cpt4676Total Outside-County copies of this publication issue mailed from all mailing offices must be under 5,000 when the .mpu Rate Type is Y = Regular Limited Circulation or W = Science of Agriculture Limited Circulation.Do not claim more than 4,999 outside-count copies of a single publication when using .mpu Rate Type of Y = Regular Limited Circulation or W = Science of Agriculture Limited Circulation. · .mpuAction: Do not claim more than 4,999 outside-count copies of a single publication when using .mpu Rate Type of Y = Regular Limited Circulation or W = Science of Agriculture Limited Circulation.Error location: .mpu4681The .mpa Postage Payment Method cannot be populated with S = Stamp when the .mpu Mail Piece Unit – Class is populated with 4 = Pkg Services.Populate the .mpa Postage Payment Method with a valid value. · .mpaAction: Populate the .mpa Postage Payment Method with a valid value.Error location: .mpa4686.csm Parent Container Reference ID {1} must be referenced by either all linked or all unlinked containers through the .csm Included in Other Documentation field.Update the .csm Included in Other Documentation field to be all linked (O, L, I) or all unlinked (blank) for the parent container. · .csmAction: Update the .csm Included in Other Documentation field to be all linked (O, L, I) or all unlinked (blank) for the parent container.Error location: .csm4690Job ID is a required field in the .rmr file.Populate the .rmr Job ID field. · .rmrAction: Populate the .rmr Job ID field.Error location: .rmr4691RMR ID is a required field in the .rmr file.Populate the .rmr RMR ID field. · .rmrAction: Populate the .rmr RMR ID field.Error location: .rmr4692Date Data Type Error: Date Start must be a valid numeric value formatted as YYYYMMDD in the .rms file.Populate the .rms Date Start field with a valid numeric value formatted as YYYYMMDD. · .rmsAction: Populate the .rms Date Start field with a valid numeric value formatted as YYYYMMDD.Error location: .rms4693Date Data Type Error: Date End must be a valid numeric value formatted as YYYYMMDD in the .rms file.Populate the .rms Date End field with a valid numeric value formatted as YYYYMMDD. · .rmsAction: Populate the .rms Date End field with a valid numeric value formatted as YYYYMMDD.Error location: .rms4694Referenceable Mail Record Value is a required field in the .rmr file.Populate the .rmr Referenceable Mail Record Value field. · .rmrAction: Populate the .rmr Referenceable Mail Record Value field.Error location: .rmr4695The .rmr RMR Template Code field must be populated with an alphabetic value (A-Z).Populate the .rmr RMR Template Code field with an alphabetic value (A-Z). · .rmrAction: Populate the .rmr RMR Template Code field with an alphabetic value (A-Z).Error location: .rmr4696For Full-Service Processing, the .cqt Simplified Address Indicator cannot be M = EDDM Mixed (Residential and Business), R = EDDM Residential-only, B = EDDM Business-only, or Y = Yes Simplified Address.Update the .cqt Simplified Address Indicator. · .cqtAction: Update the .cqt Simplified Address Indicator.Error location: .cqt4697The .cpt Component – Weight field must be populated with a value that is less than or equal to 4.4.lbs when the .mpu Mail Piece Unit – Class field is populated with 2 = Periodicals or 5 = Per Pending, the .mpu Mail Piece Unit – Processing Category field is populate with FL = Flats, the .cqt Rate Category is E = 5 Digit and the .mpu Machinability Indicator field is populated with U = Machinable on USFM 1000.Populate the .cpt Component – Weight field with a value that is less than or equal to 4.4.lbs when the .mpu Mail Piece Unit – Class field is populated with 2 or 5, the .mpu Mail Piece Unit – Processing Category field is populate with FL = Flats, the .cqt Rate Category is E = 5 Digit and the .mpu Machinability Indicator field is populated with U. · Multiple FilesAction: Populate the .cpt Component – Weight field with a value that is less than or equal to 4.4.lbs when the .mpu Mail Piece Unit – Class field is populated with 2 or 5, the .mpu Mail Piece Unit – Processing Category field is populate with FL = Flats, the .cqt Rate Category is E = 5 Digit and the .mpu Machinability Indicator field is populated with U.Error location: Multiple Files4698The value provided for the .rmr RMR Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .rmr RMR Record Status field with O, D, I or U. · .rmrAction: Populate the .rmr RMR Record Status field with O, D, I or U.Error location: .rmr4699There can be no characters after the .rmr Closing Character field.Remove all characters after the .rmr Closing Character field. · .rmrAction: Remove all characters after the .rmr Closing Character field.Error location: .rmr4700The .rmr Closing Character value provided was {1}; it must contain # sign.Populate the .rmr Closing Character field with #. · .rmrAction: Populate the .rmr Closing Character field with #.Error location: .rmr4701Referential Integrity Error: There cannot be duplicate primary keys in the .rmr file (Job ID, RMR ID, RMR ID Type, RMS ID and RMR Content Type).Populate the .rmr Job ID, RMR ID, RMR ID Type, RMS ID and RMR Content Type fields with unique values in the .rmr file. · .rmrAction: Populate the .rmr Job ID, RMR ID, RMR ID Type, RMS ID and RMR Content Type fields with unique values in the .rmr file.Error location: .rmr4702The .rmr RMR Record Status field does not match the .hdr Referencable Mail Record File Status File Status.Populate the .rmr RMR Record Status field with the same value that is populated in the .hdr Referencable Mail Record File Status field. · Multiple FilesAction: Populate the .rmr RMR Record Status field with the same value that is populated in the .hdr Referencable Mail Record File Status field.Error location: Multiple Files4703The .rmr RMR ID Type is a required field and must be populated with P = PDR, B = PBC, or C = CPT.Populate the .rmr RMR ID Type field with P, B, or C. · .rmrAction: Populate the .rmr RMR ID Type field with P, B, or C.Error location: .rmr4704The .rmr RMR Content Type is a required field and must be populated with A = Content Type A, B = Content Type B, C = Content Type C, D = Content Type D, or O = Opt Out the piece identified wishes to NOT be included in Real Mail.Populate the .rmr RMR Content Type field with A, B, C, D, or O. · .rmrAction: Populate the .rmr RMR Content Type field with A, B, C, D, or O.Error location: .rmr4705The number of records loaded into PostalOne! For the {1} file does not match the record count within the .hdr file. Expected: [2} Actual: [3]Please contact PostalOne! Application support for assistance. · Multiple FilesAction: Please contact PostalOne! Application support for assistance.Error location: Multiple Files4706When the .rmr RMR ID Type is P = PDR or B = PBC and the .rmr RMR Content Type is O = Opt Out the piece identified wishes to NOT be included in Real Mail, no additional .rmr RMR Content Types can be claimed on the same .rmr RMR ID.Update the .rmr RMR ID to no longer claim .rmr Content Type of O and any additional Content Type. · .rmrAction: Update the .rmr RMR ID to no longer claim .rmr Content Type of O and any additional Content Type.Error location: .rmr4707The .rmr Job ID field does not match the .hdr Job ID field.Populate the .rmr Job ID field with the same value that is populated in the .hdr Job ID field. · Multiple FilesAction: Populate the .rmr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Multiple Files4708The .hdr Referencable Mail Record Count field must match the record count of the Referencable Mail Record File.Populate the .hdr Referencable Mail Record Count with a value that is equal to the record count of the Referencable Mail Record File. · Multiple FilesAction: Populate the .hdr Referencable Mail Record Count with a value that is equal to the record count of the Referencable Mail Record File.Error location: Multiple Files4709Required Field Missing: Referenceable Mail Record Count is a required field in the .hdr file.Populate the .hdr Referenceable Mail Record Count field. · .hdrAction: Populate the .hdr Referenceable Mail Record Count field.Error location: .hdr4710Required Field Missing: Referenceable Mail Record Status is a required field in the .hdr file.Populate the .hdr Referenceable Mail Record Status field. · .hdrAction: Populate the .hdr Referenceable Mail Record Status field.Error location: .hdr4711Numeric Data Type Error: Referenceable Mail Record Count must be a numeric value in the .hdr file.Populate the .hdr Referenceable Mail Record Count field with a numeric value. · .hdrAction: Populate the .hdr Referenceable Mail Record Count field with a numeric value.Error location: .hdr4712The .hdr Referenceable Mail Record Status field value provided was {1}; it must contain O = Original, N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Referenceable Mail Record Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Referenceable Mail Record Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr4714When the .rmr RMR ID Type is B = PBC, the .rmr RMR ID must correspond to a PBC Unique ID in the .pbc file and the .pbc Barcode must be populated.Update the .rmr RMR ID field to match the .pbc file and ensure the .pbc Barcode is populated. · Multiple FilesAction: Update the .rmr RMR ID field to match the .pbc file and ensure the .pbc Barcode is populated.Error location: Multiple Files4715When the .rmr RMR ID Type is P = PDR, the .rmr RMR ID must correspond to a Piece ID in the .pdr file and the .pdr IM Barcode must be populated.Update the .rmr RMR ID field to match the .pdr file and ensure .pdr IM Barcode is populated. · Multiple FilesAction: Update the .rmr RMR ID field to match the .pdr file and ensure .pdr IM Barcode is populated.Error location: Multiple Files4716When the .rmr RMR ID Type is C = CPT, the .rmr RMR ID must correspond to a Component ID in the .cpt file.Update the .rmr RMR ID field to match the .cpt file. · Multiple FilesAction: Update the .rmr RMR ID field to match the .cpt file.Error location: Multiple Files4719A Handling Unit (.csm Container Types S = Sack, 1 = #1 Sack, 2 = #2 Sack, 3 = #3 Sack, 4 = 01 V Sack, 5 = 03 V Sack, O = 1 Tray, T = 2 Tray, E = EMM Tray, F = Flat Tub, L = Logical Tray, V = Virtual Sack) cannot be nested on another Handling Unit (through population of .csm Parent Container ID).Update nesting to no longer include a Handling Unit nested on another Handling Unit. · .csmAction: Update nesting to no longer include a Handling Unit nested on another Handling Unit.Error location: .csm4720All nested containers (which have .csm Parent Container ID populated) must have the same .csm Postage Statement Mailing Date of their parent.Update the .csm Postage Statement Mailing Date of the nested containers to match the date of their parent. · .csmAction: Update the .csm Postage Statement Mailing Date of the nested containers to match the date of their parent.Error location: .csm4728The .sfr Service Type claimed {1} is invalid for the corresponding .mpu Mail Piece Unit – Class {2}, .mpu Mail Piece Unit – Processing Category {3}, .mpu Mail Piece Unit – Rate Type {4}, and .cqt Rate Category {5}.Update eDoc to claim a valid .sfr Service Type. · Multiple FilesAction: Update eDoc to claim a valid .sfr Service Type.Error location: Multiple Files4729The permit provided was: .mpa – Permit Number {1}, .mpa – Permit ZIP+4 {2}. Shipping Products Permits are not allowed for the combination .mpu – Mail Piece Unit – Class {3} and .mpu – Mail Piece Unit – Processing Category {4} provided.Use a non-Shipping Products permit. · Multiple FilesAction: Use a non-Shipping Products permit.Error location: Multiple Files4730When the .rms file is present, either the corresponding .csm Referenceable Mail Start Date or the .rms Start Date must be populated.Populate either the corresponding .csm Referenceable Mail Start Date or the .rms Start Date. · Multiple FilesAction: Populate either the corresponding .csm Referenceable Mail Start Date or the .rms Start Date.Error location: Multiple Files4731When the .rms file is present, either the corresponding .csm Referenceable Mail End Date or the .rms End Date must be populated.Populate either the corresponding .csm Referenceable Mail End Date or the .rms End Date. · Multiple FilesAction: Populate either the corresponding .csm Referenceable Mail End Date or the .rms End Date.Error location: Multiple Files4732All .csm Container IDs correlating to a single.cpt Component ID must have the same .csm Referenceable Mail Start Date when populated if no barcode data is provided.Ensure all .csm Container IDs correlating to a single .cpt Component ID have the same .csm Referenceable Mail Start Date when populated if no barcode data is provided. · Multiple FilesAction: Ensure all .csm Container IDs correlating to a single .cpt Component ID have the same .csm Referenceable Mail Start Date when populated if no barcode data is provided.Error location: Multiple Files4733All .csm Container IDs correlating to a single.cpt Component ID must have the same .csm Referenceable Mail End Date when populated if no barcode data is provided.Ensure all .csm Container IDs correlating to a single .cpt Component ID have the same .csm Referenceable Mail End Date when populated if no barcode data is provided. · Multiple FilesAction: Ensure all .csm Container IDs correlating to a single .cpt Component ID have the same .csm Referenceable Mail End Date when populated if no barcode data is provided.Error location: Multiple Files4752Null response found when validating origin data for the .oci record. Verify the following fields: Container Exists: {1}, Display Container ID matches: {2}, Original Label IM Container or IM Tray Barcode matches: {3}, Segment ID matches: {4}, Postage Statement Finalized: {5}, Container previously consolidated: {6}, Included In Other Documentation: {7}, eDoc Sender CRID: {8}, Verification Facility ZIP: {9}.Verify the .oci origin data. · .ociAction: Verify the .oci origin data.Error location: .oci4753Required Field Missing: Referenceable Mail Summary Record Count is a required field in the .hdr file.Populate the .hdr Referenceable Mail Summary Record Count field. · .hdrAction: Populate the .hdr Referenceable Mail Summary Record Count field.Error location: .hdr4754Required Field Missing: Referenceable Mail Summary Status is a required field in the .hdr file.Populate the .hdr Referenceable Mail Summary Status field. · .hdrAction: Populate the .hdr Referenceable Mail Summary Status field.Error location: .hdr4755Data Type Error: Referenceable Mail Summary Record Count must be a numeric value in the .hdr file.Populate the .hdr Referenceable Mail Summary Record Count field with a numeric value. · .hdrAction: Populate the .hdr Referenceable Mail Summary Record Count field with a numeric value.Error location: .hdr4756The .hdr Referenceable Mail Summary Status field value provided was {1}; it must contain O = Original, N = Non Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Referenceable Mail Summary Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Referenceable Mail Summary Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr4757The value provided for the .rms RMS Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .rms RMS Record Status field with O, D, I or U. · .rmsAction: Populate the .rms RMS Record Status field with O, D, I or U.Error location: .rms4758There can be no characters after the .rms Closing Character field.Remove all characters after the .rms Closing Character field. · .rmsAction: Remove all characters after the .rms Closing Character field.Error location: .rms4759The .rms Closing Character value provided was {1}; it must contain # sign.Populate the .rms Closing Character field with #. · .rmsAction: Populate the .rms Closing Character field with #.Error location: .rms4760When submitting a tray-based copalletization consolidator submission, the .csm Postage Statement Mailing Date is required.Populate the .csm Postage Statement Mailing Date. · .csmAction: Populate the .csm Postage Statement Mailing Date.Error location: .csm4761The .rms Campaign Serial Grouping field must be populated with C.If populated the .csm Campaign Serial Grouping field must be C. · .rmsAction: If populated the .csm Campaign Serial Grouping field must be C.Error location: .rms4762Job ID is a required field in the .rms file.Populate the .rms Job ID field. · .rmsAction: Populate the .rms Job ID field.Error location: .rms4763RMS ID is a required field in the .rms file.Populate the .rms RMS ID field. · .rmsAction: Populate the .rms RMS ID field.Error location: .rms4764Campaign Title is a required field in the .rms file.Populate the .rms Campaign Title field. · .rmsAction: Populate the .rms Campaign Title field.Error location: .rms4765The .rms Campaign Code field is a required field in the .rms file.Populate the .rms Campaign Code field. · .rmsAction: Populate the .rms Campaign Code field.Error location: .rms4766The .rms Display Name is a required field and must be populated with an alphanumeric value.Populate the .rms Display Name with an alphanumeric value. · .rmsAction: Populate the .rms Display Name with an alphanumeric value.Error location: .rms4767The .rms Job ID field does not match the .hdr Job ID field.Populate the .rms Job ID field with the same value that is populated in the .hdr Job ID field.Action: Populate the .rms Job ID field with the same value that is populated in the .hdr Job ID field.4768The .csm Container Type is {1}. When the .cqt Rate Category is FI = Reserved* or FJ = Reserved* and the .cqt Destination Entry is not P = Reserved, the corresponding .csm container type must be A = EIRS 61P – Hamper, Large Plastic, C = EIRS 84C – Collapsible Wire Container, D = EIRS 68 – Eastern Region Mail Container w/Web Door, G = EIR 66 – General Purpose Mail Container w.Gate, H = EIRS 61 – Hamper, Large Canvas, M = Logical Pallet, P = Pallet, R = EIRS 84 – Wire Container Rigid, or Z = User Pallet.Populate the .csm Container Type with A, C, D, G, H, M, P, R, or Z. *FSS Rate Categories remain valid only before Price Change Date · .csmAction: Populate the .csm Container Type with A, C, D, G, H, M, P, R, or Z. *FSS Rate Categories remain valid only before Price Change DateError location: .csm4769The .hdr Referenceable Mail Summary Record Count field must match the record count of the Referenceable Mail Summary file.Populate the .hdr Referenceable Mail Summary Record Count with a value that is equal to the record count of the Referenceable Mail Summary Record File. · Multiple FilesAction: Populate the .hdr Referenceable Mail Summary Record Count with a value that is equal to the record count of the Referenceable Mail Summary Record File.Error location: Multiple Files4770The RMS ID field in the .rmr file must match an RMS ID field in the .rms file.Populate the .rmr RMS ID to match the .rms RMS ID. · Multiple FilesAction: Populate the .rmr RMS ID to match the .rms RMS ID.Error location: Multiple Files4771When an .rms file is submitted the .rmr file must be present.Include an .rmr file in the mailing. · Multiple FilesAction: Include an .rmr file in the mailing.Error location: Multiple Files4772When an .rmr file is submitted the .rms file must be present.Include an .rms file in the mailing. · Multiple FilesAction: Include an .rms file in the mailing.Error location: Multiple Files4773Referential Integrity Error: The .rmr CQT Database ID does not match the corresponding .pbc CQT Database ID for the piece.Populate the .rmr CQT Database ID with a value that matches the .pbc CQT Database ID field for the piece. · Multiple FilesAction: Populate the .rmr CQT Database ID with a value that matches the .pbc CQT Database ID field for the piece.Error location: Multiple Files4774Referential Integrity Error: The .rmr CQT Database ID does not match the corresponding .pdr CQT Database ID for the piece.Populate the .rmr CQT Database ID with a value that matches the .pdr CQT Database ID field for the piece. · Multiple FilesAction: Populate the .rmr CQT Database ID with a value that matches the .pdr CQT Database ID field for the piece.Error location: Multiple Files4775When the .rmr RMR ID Type is populated with P = PDR or B = PBC the .rmr CQT Database ID field is required.Populate the .rmr CQT Database ID field when the .rmr RMR ID Type is populated with P or B. · Multiple FilesAction: Populate the .rmr CQT Database ID field when the .rmr RMR ID Type is populated with P or B.Error location: Multiple Files4777For Full-Service Processing, the .csm Scheduled Ship Date field is required when the .csm USPS Pick Up field is populated with Y = Yes.Populate the .csm Scheduled Ship Date field when the .csm USPS Pick Up field is Y. · .csmAction: Populate the .csm Scheduled Ship Date field when the .csm USPS Pick Up field is Y.Error location: .csm4778Required Field Missing: Referenceable Mail Barcode Record Count is a required field in the .hdr file.Populate the .hdr Referenceable Mail Barcode Record Count field. · .hdrAction: Populate the .hdr Referenceable Mail Barcode Record Count field.Error location: .hdr4779Required Field Missing: Referenceable Mail Barcode Status is a required field in the .hdr file.Populate the .hdr Referenceable Mail Barcode Status field. · .hdrAction: Populate the .hdr Referenceable Mail Barcode Status field.Error location: .hdr4780Data Type Error: Referenceable Mail Barcode Record Count must be a numeric value in the .hdr file.Populate the .hdr Referenceable Mail Barcode Record Count field with a numeric value. · .hdrAction: Populate the .hdr Referenceable Mail Barcode Record Count field with a numeric value.Error location: .hdr4781The .hdr Referenceable Mail Barcode Status field value provided was {1}; it must contain O = Original, N = Non Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Referenceable Mail Barcode Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Referenceable Mail Barcode Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr4782When the .hdr Mail.dat Presentation Category is populated with I = Informed Delivery, only the .hdr, .rms, and .rmb files must be provided. Additional optional files .tsr, .tgr, .tdr, .tcr, .tcs may be included.Provide only the .hdr, .rms, .rmb, tsr, .tgr, .tdr, .tcr, and .tcs files. · Multiple FilesAction: Provide only the .hdr, .rms, .rmb, tsr, .tgr, .tdr, .tcr, and .tcs files.Error location: Multiple Files4785For .hdr File Processing, the Mail.dat Presentation Category is populated with an invalid value; the .hdr Mail.dat Presentation Category must be populated with I = Informed Delivery when the .rmb file is provided.Update the .hdr Presentation Category to I = Informed Delivery. · Multiple FilesAction: Update the .hdr Presentation Category to I = Informed Delivery.Error location: Multiple Files4787The value provided for the .rmb RMB Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .rmb RMB Record Status field with O, D, I or U. · .rmbAction: Populate the .rmb RMB Record Status field with O, D, I or U.Error location: .rmb4788There can be no characters after the .rmb Closing Character field.Remove all characters after the .rmb Closing Character field. · .rmbAction: Remove all characters after the .rmb Closing Character field.Error location: .rmb4789The .rmb Closing Character value provided was {1}; it must contain # sign.Populate the .rmb Closing Character field with #. · .rmbAction: Populate the .rmb Closing Character field with #.Error location: .rmb4790Referential Integrity Error: There cannot be duplicate primary keys in the .rmb file (Job ID, RMS ID, Barcode, and RMB Content Type).Populate the .rmb Job ID, RMS ID, Barcode, and RMB Content Type fields with unique values in the .rmb file. · .rmbAction: Populate the .rmb Job ID, RMS ID, Barcode, and RMB Content Type fields with unique values in the .rmb file.Error location: .rmb4791The .rmb RMB Content Type is a required field and must be populated with A = Content Type A, B = Content Type B, C = Content Type C, D = Content Type D, or O = Opt Out the piece identified wish to NOT be included in Real Mail.Populate the .rmb RMB Content Type field with A, B, C, D, or O. · .rmbAction: Populate the .rmb RMB Content Type field with A, B, C, D, or O.Error location: .rmb4792Job ID is a required field in the .rmb file.Populate the .rmb Job ID field. · .rmbAction: Populate the .rmb Job ID field.Error location: .rmb4793RMS ID is a required field in the .rmb file.Populate the .rmb RMS ID field. · .rmbAction: Populate the .rmb RMS ID field.Error location: .rmb4794Referenceable Mail Barcode Value is a required field in the .rmb file.Populate the .rmb Referenceable Mail Barcode Value field. · .rmbAction: Populate the .rmb Referenceable Mail Barcode Value field.Error location: .rmb4795Barcode is a required field in the .rmb file.Populate the .rmb Barcode field. · .rmbAction: Populate the .rmb Barcode field.Error location: .rmb4796For Informed Delivery processing, the .rmb Barcode field must be populated with a 20, 25, 29, or 31 character value.Populate the .rmb Barcode field a 20, 25, 29, or 31 character value. · .rmbAction: Populate the .rmb Barcode field a 20, 25, 29, or 31 character value.Error location: .rmb4797The .rmb Job ID field does not match the .hdr Job ID field.Populate the .rmb Job ID field with the same value that is populated in the .hdr Job ID field. · Multiple FilesAction: Populate the .rmb Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Multiple Files4798The .hdr Referencable Mail Barcode Count field must match the record count of the Referencable Mail Barcode File.Populate the .hdr Referencable Mail Barcode Count with a value that is equal to the record count of the Referencable Mail Barcode File. · Multiple FilesAction: Populate the .hdr Referencable Mail Barcode Count with a value that is equal to the record count of the Referencable Mail Barcode File.Error location: Multiple Files4799The .rmb RMB Record Status field does not match the .hdr Referenceable Mail Barcode Status.Populate the .rmb RMB Record Status field with the same value that is populated in the .hdr Referenceable Mail Barcode Status field. · Multiple FilesAction: Populate the .rmb RMB Record Status field with the same value that is populated in the .hdr Referenceable Mail Barcode Status field.Error location: Multiple Files4800When the .rmb RMR Content Type is O = Opt Out the piece identified wish to NOT be included in Real Mail, no additional .rmb RMB Content Types can be claimed on the same Barcode.Update the .rmb to no longer claim RMB Content Type of O and any additional Content Type. · .rmbAction: Update the .rmb to no longer claim RMB Content Type of O and any additional Content Type.Error location: .rmb4801The RMS ID field in the .rmb file must match a RMS ID field in the .rms file.Populate the .rmb RMS ID to match the .rms RMS ID. · Multiple FilesAction: Populate the .rmb RMS ID to match the .rms RMS ID.Error location: Multiple Files4802When the .hdr Mail.dat Presentation Category is populated with I = Informed Delivery, Mail.dat version {1} may not be submitted with an .RMS Date Start before {2}.Do not attempt to submit a Mail.dat version {1} mailings with an .RMS Date Start prior to {2}. · Multiple FilesAction: Do not attempt to submit a Mail.dat version {1} mailings with an .RMS Date Start prior to {2}.Error location: Multiple Files4803When the .hdr Mail.dat Presentation Category is populated with I = Informed Delivery, the .rms Date Start must be provided.Provide the .rms Date Start. · .rmsAction: Provide the .rms Date Start.Error location: .rms4804When the .hdr Mail.dat Presentation Category is populated with I = Informed Delivery, the .rms Date End must be provided.Provide the .rms Date End. · .rmsAction: Provide the .rms Date End.Error location: .rms4805Referential Integrity Error: There cannot be duplicate primary keys in the .rms file (Job ID, RMS ID).Populate the .rms Job ID and RMS ID fields with unique values in the .rms file. · .rmsAction: Populate the .rms Job ID and RMS ID fields with unique values in the .rms file.Error location: .rms4806All records for a single .rmr RMR ID must reference a single .rmr RMS ID.Populate the same .rmr RMS ID for all records. · .rmrAction: Populate the same .rmr RMS ID for all records.Error location: .rmr4807The .rms RMS Record Status field does not match the .hdr Referenceable Mail Summary Status.Populate the .rms RMS Record Status field with the same value that is populated in the .hdr Referenceable Mail Summary Status field. · Multiple FilesAction: Populate the .rms RMS Record Status field with the same value that is populated in the .hdr Referenceable Mail Summary Status field.Error location: Multiple Files4808Primary Key of the .rms file cannot be updated.Do not update the primary key. · .rmsAction: Do not update the primary key.Error location: .rms4809Primary Key of the rmb file cannot be updated.Do not update the primary key. · .rmbAction: Do not update the primary key.Error location: .rmb4811RMS ID is a required field in the .rmr file.Populate the .rmr RMS ID field. · .rmrAction: Populate the .rmr RMS ID field.Error location: .rmr4814The .mpu Mail Piece Unit – Weight field must be populated with a value that is less than or equal to 24 oz when the .seg Class Defining Preparation is 6 = Std/Bound Printed Matter/Periodicals Co-Mailings, the .mpu Mail Piece Unit – Class is 4 = Pkg Services, and the .mpu Mail Piece Unit – Rate Type field is populated with B = Bound Printed Matter.Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 24 oz. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Weight field with a value that is less than or equal to 24 oz.Error location: Multiple Files4815The .cqt Destination Entry field must be populated with S = DSCF or D = DDU when multiple .mpu Mail Piece Unit – Classes, including 4 = Pkg Services, exist within a single container. The value provided was {1}.Populate the .cqt Destination Entry with S = DSCF or D = DDU. · Multiple FilesAction: Populate the .cqt Destination Entry with S = DSCF or D = DDU.Error location: Multiple Files4816The .cqt Rate Category field value provided must contain D or N when the .mpu Mail Piece Unit – Class field is populated with 4 (Pkg Services) and the .seg Class Defining Preparation field is populated with 6 (Std/Bound Printed Matter/Periodicals Co-Mailings).Populate the .cqt Rate Category field with D or N when the .mpu Mail Piece Unit – Class field is populated with 4 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cqt Rate Category field with D or N when the .mpu Mail Piece Unit – Class field is populated with 4 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4817The value provided for the .mpa Postage Payment Option field was {1}; it must contain C = CPP, V = PVDS, T = EPS, or D = Debit when the .mpu Mail Piece Unit – Class field is populated with 4 = Pkg Services, .mpu Mail Piece Unit – Rate Type field is populated with B = Bound Printed Matter and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpa Postage Payment Option field with V, C, T, or D when the .mpu Mail Piece Unit – Class field is populated with 4 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpa Postage Payment Option field with V, C, T, or D when the .mpu Mail Piece Unit – Class field is populated with 4 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4818The value provided for the .cpt Component – Rate Type field must contain B = Bound Printed Matter when the .mpu Mail Piece Unit – Class field is populated with 4 = Pkg Services and the .seg Class Defining Preparation field is populated with 6 = Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .cpt Component – Rate Type field with B when the .mpu Mail Piece Unit – Class field is populated with 4 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .cpt Component – Rate Type field with B when the .mpu Mail Piece Unit – Class field is populated with 4 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4819The .mpu Mail Piece Unit – Rate Type field must contain B = Bound Printed Matter when the .mpu Mail Piece Unit – Class field is populated with 4 = Pkg Services and the .seg Class Defining Preparation field is populated with 6=Std/Bound Printed Matter/Periodicals Co-Mailings.Populate the .mpu Mail Piece Unit – Rate Type field with B when the .mpu Mail Piece Unit – Class field is populated with 4 and the .seg Class Defining Preparation field is populated with 6. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Rate Type field with B when the .mpu Mail Piece Unit – Class field is populated with 4 and the .seg Class Defining Preparation field is populated with 6.Error location: Multiple Files4820.seg Class Defining Preparation of 6 = Std/Bound Printed Matter/Periodical Co-Mailings is not allowed when the .pqt Combo-Pack ID is populated.Do not populate .pqt Combo-Pack ID. · Multiple FilesAction: Do not populate .pqt Combo-Pack ID.Error location: Multiple Files4821Populating .csm Included In Other Documentation is not allowed when the .pqt Combo-Pack ID is populated.Do not populate .csm Included In Other Documentation when .pqt Combo-Pack ID is populated. · Multiple FilesAction: Do not populate .csm Included In Other Documentation when .pqt Combo-Pack ID is populated.Error location: Multiple Files4822When the .pqt Combo-Pack ID is populated for .mpu Mail Piece Unit – Class of 2 = Periodicals or 5 = Per Pending, each Mail Piece Unit ID must only be associated with multiple Component IDs within the .mcr file when those components are not Periodicals or are Periodicals with .cpt Component – Rate Type H = Per Ride-Along and Z – Included, part of host postage.Update .mpu Mail Piece Unit ID. · Multiple FilesAction: Update .mpu Mail Piece Unit ID.Error location: Multiple Files4823When the .pqt Combo-Pack ID is populated for .mpu Mail Piece Unit – Class of 2 = Periodicals, each .mpu Mail Piece Unit ID must only have one .mpa USPS Publication Number.Update .mpa USPS Publication Number. · Multiple FilesAction: Update .mpa USPS Publication Number.Error location: Multiple Files4825When the .pqt Combo-Pack ID is populated for .mpu Mail Piece Unit – Class of 2 = Periodicals or 5 = Per Pending, the .pqt Number of Pieces must be greater than or equal to 1 only on the CQT Database ID which has the highest .cpt Component – Periodical Ad Percentage and has .cpt Component – Rate Type of R = Regular.Update .pqt Number of Pieces. · Multiple FilesAction: Update .pqt Number of Pieces.Error location: Multiple Files4826When the .pqt Combo-Pack ID is populated for .mpu Mail Piece Unit – Class of 2 = Periodicals or 5 = Per Pending, the sum of the .cpt Component – Weight for each unique .pqt Combo-Pack ID + .pqt Package ID + .csm Container ID must be less than or equal to 16 oz.Update .cpt Component – Weight. · Multiple FilesAction: Update .cpt Component – Weight.Error location: Multiple Files4827When the .pqt Combo-Pack ID is populated for .mpu Mail Piece Unit – Class of 2 = Periodicals or 5 = Per Pending, the .mpu Mail Piece Unit – Processing Category field is populated with FL = Flats and the .mpu Machinability Indicator field is populated with Y = Machinable, the sum of the .cpt Component – Weight for each unique .pqt Combo-Pack ID + .pqt Package ID + .csm Container ID must be less than or equal to 24 oz.Update .cpt Component – Weight. · Multiple FilesAction: Update .cpt Component – Weight.Error location: Multiple Files4828When the .pqt Combo-Pack ID is populated for .mpu Mail Piece Unit – Class of 2 = Periodicals or 5 = Per Pending, a .pdr record must exist for the CQT Database ID which has the .cqt Number of Pieces populated with a piece.Update .pdr CQT Database ID. · Multiple FilesAction: Update .pdr CQT Database ID.Error location: Multiple Files4829When the .pqt Combo-Pack ID is populated for .mpu Mail Piece Unit – Class of 2 = Periodicals or 5 = Per Pending, a .pbc record must exist for the CQT Database ID which has the .cqt Number of Pieces populated with a piece.Update .pbc CQT Database ID. · Multiple FilesAction: Update .pbc CQT Database ID.Error location: Multiple Files4852When the .mpu Mail Piece Unit - Class is 2 = Periodicals, the .mpu Mail Piece Unit - Processing Category is LT = Letter, and the .csm Tray Preparation Type is L = Loose, the.cqt Rate Category cannot be L6 = MxADC/Mixed.Update .csm Tray Preparation Type. · Multiple FilesAction: Update .csm Tray Preparation Type.Error location: Multiple Files4856Container Id {1} Entry Point for Entry Discount – Facility Type {2} failed conversion to Entry available in outside-county Container Sack/Tray or Pallet Prices.Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly. · .csmAction: Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly.Error location: .csm4857.rmr RMR Content Types A = Ride-Along Image URL and B = Ride-Along Image Target URL are required for Informed Delivery campaigns.Include .rmr RMR Content Types A and B. · .rmrAction: Include .rmr RMR Content Types A and B.Error location: .rmr4858.rmb RMB Content Types A = Ride-Along Image URL and B = Ride-Along Image Target URL are required for Informed Delivery campaigns.Include .rmb RMB Content Types A and B. · .rmbAction: Include .rmb RMB Content Types A and B.Error location: .rmb4859.rmr RMR Content Type of C = Replace Image URL is required for Informed Delivery campaigns when the .mpu Mail Piece Unit – Processing Category is FL = Flat.Include .rmr RMR Content Type C. · Multiple FilesAction: Include .rmr RMR Content Type C.Error location: Multiple Files4860When the .pqt Combo-Pack ID is populated for .mpu Mail Piece Unit – Class of 5 = Per Pending, each .mpu Mail Piece Unit ID must only have one .mpa Permit Number.Update .mpa Permit Number. · Multiple FilesAction: Update .mpa Permit Number.Error location: Multiple Files4861When the .pqt Combo-Pack ID is populated for .mpu Mail Piece Unit – Class of 2 = Periodicals or 5 = Per Pending, the .mpu Processing Category must be populated with a unique value.Update .mpu Processing Category. · Multiple FilesAction: Update .mpu Processing Category.Error location: Multiple Files4864The .csm Scheduled Induction End Date must be after or equal to the .csm Scheduled Induction Start Date when populated.Populate the .csm Scheduled Induction End Date field with a date after or equal to the .csm Scheduled Induction Start Date. · .csmAction: Populate the .csm Scheduled Induction End Date field with a date after or equal to the .csm Scheduled Induction Start Date.Error location: .csm4865When the .pqt Combo-Pack ID is populated for .mpu Mail Piece Unit – Class of 2 = Periodicals or 5 = Per Pending, the associated .cpt Component – Rate Type must either be all eligible or all ineligible for the Preferred Price Discount.Update the .cpt Component – Rate Type. · Multiple FilesAction: Update the .cpt Component – Rate Type.Error location: Multiple Files4866Referential Integrity Error: The Total Number of Copies from all .pqt child handling unit records must equal the .cqt parent records Number of CopiesVerify that the total Number of Copies from all .pqt child handling unit records is equal to the .cqt parent records Number of Copies · Multiple FilesAction: Verify that the total Number of Copies from all .pqt child handling unit records is equal to the .cqt parent records Number of CopiesError location: Multiple Files4867Referential Integrity Error: The number of child .pdr records must equal a count between the Number of Pieces and the Number of Copies in the parent .csm file.Verify that the number of child .pdr records is equal to a count between the Number of Pieces and the Number of Copies in the parent .csm file. · Multiple FilesAction: Verify that the number of child .pdr records is equal to a count between the Number of Pieces and the Number of Copies in the parent .csm file.Error location: Multiple Files4868Referential Integrity Error: The number of child .pbc records must equal a count between the Number of Pieces and the Number of Copies in the parent .csm fileVerify that the number of child .pbc records is equal to a count between the Number of Pieces and the Number of Copies in the parent .csm file. · Multiple FilesAction: Verify that the number of child .pbc records is equal to a count between the Number of Pieces and the Number of Copies in the parent .csm file.Error location: Multiple Files4869Referential Integrity Error: The total number of copies from all .pdr/.pbc records must equal a count between the .pqt Number of Pieces and the .pqt Number of Copies for the corresponding CQT Database ID {1} and Package ID {2} when the .cqt Service Level Indicator is populated with F = Full Service.Verify that the number of .pdr/.pbc records is equal to a count between the .pqt Number of Pieces and the .pqt Number of Copies. · Multiple FilesAction: Verify that the number of .pdr/.pbc records is equal to a count between the .pqt Number of Pieces and the .pqt Number of Copies.Error location: Multiple Files4870The .cqt 3 Digit/5 Digit Container Division must be numeric when the .csm eInduction Indicator = Y.Populate the .cqt 3 Digit/5 Digit Container Division with a numeric value. · Multiple FilesAction: Populate the .cqt 3 Digit/5 Digit Container Division with a numeric value.Error location: Multiple Files4871The .mpu Mail Piece Unit – Rate Type must be populated with the same value as the host .cpt Component – Rate Type.Populate the .mpu Mail Piece Unit – Rate Type with the same value as the host .cpt Component – Rate Type. · Multiple FilesAction: Populate the .mpu Mail Piece Unit – Rate Type with the same value as the host .cpt Component – Rate Type.Error location: Multiple Files4872When the .hdr Mail.dat Presentation Category is populated with T = Transportation Communication, only the following files may be included: .hdr, .tsr, .tgr, .tdr, .tcr, .tcs.Provide only the .hdr, .tsr, .tgr, .tdr, .tcr, or .tcs files. · Multiple FilesAction: Provide only the .hdr, .tsr, .tgr, .tdr, .tcr, or .tcs files.Error location: Multiple Files4873Required Field Missing: Transportation Summary Record Count is a required field in the .hdr file.Populate the .hdr Transportation Summary Record Count field. · .hdrAction: Populate the .hdr Transportation Summary Record Count field.Error location: .hdr4874Required Field Missing: Transportation Geo-Data Record Count is a required field in the .hdr file.Populate the .hdr Transportation Geo-Data Record Count field. · .hdrAction: Populate the .hdr Transportation Geo-Data Record Count field.Error location: .hdr4875Required Field Missing: Transportation Detail Record Count is a required field in the .hdr file.Populate the .hdr Transportation Detail Record Count field. · .hdrAction: Populate the .hdr Transportation Detail Record Count field.Error location: .hdr4876Required Field Missing: Transportation Container Record Count is a required field in the .hdr file.Populate the .hdr Transportation Container Record Count field. · .hdrAction: Populate the .hdr Transportation Container Record Count field.Error location: .hdr4877Required Field Missing: Transportation Container Status Record Count is a required field in the .hdr file.Populate the .hdr Transportation Container Status Record Count field. · .hdrAction: Populate the .hdr Transportation Container Status Record Count field.Error location: .hdr4878Data Type Error: Transportation Summary Record Count must be a numeric value in the .hdr file.Populate the .hdr Transportation Summary Record Count field with a numeric value. · .hdrAction: Populate the .hdr Transportation Summary Record Count field with a numeric value.Error location: .hdr4879Data Type Error: Transportation Geo-Data Record Count must be a numeric value in the .hdr file.Populate the .hdr Transportation Geo-Data Record Count field with a numeric value. · .hdrAction: Populate the .hdr Transportation Geo-Data Record Count field with a numeric value.Error location: .hdr4880Data Type Error: Transportation Detail Record Count must be a numeric value in the .hdr file.Populate the .hdr Transportation Detail Record Count field with a numeric value. · .hdrAction: Populate the .hdr Transportation Detail Record Count field with a numeric value.Error location: .hdr4881Data Type Error: Transportation Container Record Count must be a numeric value in the .hdr file.Populate the .hdr Transportation Container Record Count field with a numeric value. · .hdrAction: Populate the .hdr Transportation Container Record Count field with a numeric value.Error location: .hdr4882Data Type Error: Transportation Container Status Record Count must be a numeric value in the .hdr file.Populate the .hdr Transportation Container Status Record Count field with a numeric value. · .hdrAction: Populate the .hdr Transportation Container Status Record Count field with a numeric value.Error location: .hdr4883The .hdr Transportation Summary Record Status field value provided was {1}; it must contain O = Original, N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Transportation Summary Record Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Transportation Summary Record Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr4884The .hdr Transportation Geo-Data Record Status field value provided was {1}; it must contain O = Original, N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Transportation Geo-Data Record Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Transportation Geo-Data Record Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr4885The .hdr Transportation Detail Record Status field value provided was {1}; it must contain O = Original, N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Transportation Detail Record Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Transportation Detail Record Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr4886The .hdr Transportation Container Record Status field value provided was {1}; it must contain O = Original, N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Transportation Container Record Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Transportation Container Record Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr4887The .hdr Transportation Container Status Record Status field value provided was {1}; it must contain O = Original, N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Transportation Container Status Record Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Transportation Container Status Record Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr4888The .hdr Transportation Summary Record Count field must match the record count of the Transportation Summary Record File.Populate the .hdr Transportation Summary Record Count with a value that is equal to the record count of the Transportation Summary Record File. · Multiple FilesAction: Populate the .hdr Transportation Summary Record Count with a value that is equal to the record count of the Transportation Summary Record File.Error location: Multiple Files4889The .hdr Transportation Geo-Data Record Count field must match the record count of the Transportation Geo-Data Record File.Populate the .hdr Transportation Geo-Data Record Count with a value that is equal to the record count of the Transportation Geo-Data Record File. · Multiple FilesAction: Populate the .hdr Transportation Geo-Data Record Count with a value that is equal to the record count of the Transportation Geo-Data Record File.Error location: Multiple Files4890The .hdr Transportation Detail Record Count field must match the record count of the Transportation Detail Record File.Populate the .hdr Transportation Detail Record Count with a value that is equal to the record count of the Transportation Detail Record File. · Multiple FilesAction: Populate the .hdr Transportation Detail Record Count with a value that is equal to the record count of the Transportation Detail Record File.Error location: Multiple Files4891The .hdr Transportation Container Record Count field must match the record count of the Transportation Container Record File.Populate the .hdr Transportation Container Record Count with a value that is equal to the record count of the Transportation Container Record File. · Multiple FilesAction: Populate the .hdr Transportation Container Record Count with a value that is equal to the record count of the Transportation Container Record File.Error location: Multiple Files4892The .hdr Transportation Container Status Record Count field must match the record count of the Transportation Container Status Record File.Populate the .hdr Transportation Container Status Record Count with a value that is equal to the record count of the Transportation Container Status Record File. · Multiple FilesAction: Populate the .hdr Transportation Container Status Record Count with a value that is equal to the record count of the Transportation Container Status Record File.Error location: Multiple Files4893The .tsr Record Status field does not match the .hdr Transportation Summary Record Status.Populate the .tsr Record Status field with the same value that is populated in the .hdr Transportation Summary Record Status field. · Multiple FilesAction: Populate the .tsr Record Status field with the same value that is populated in the .hdr Transportation Summary Record Status field.Error location: Multiple Files4894The .tgr Record Status field does not match the .hdr Transportation Geo-Data Record Status.Populate the .tgr Record Status field with the same value that is populated in the .hdr Transportation Geo-Data Record Status field. · Multiple FilesAction: Populate the .tgr Record Status field with the same value that is populated in the .hdr Transportation Geo-Data Record Status field.Error location: Multiple Files4895The .tdr Record Status field does not match the .hdr Transportation Detail Record Status.Populate the .tdr Record Status field with the same value that is populated in the .hdr Transportation Detail Record Status field. · Multiple FilesAction: Populate the .tdr Record Status field with the same value that is populated in the .hdr Transportation Detail Record Status field.Error location: Multiple Files4896The .tcr Record Status field does not match the .hdr Transportation Container Record Status.Populate the .tcr Record Status field with the same value that is populated in the .hdr Transportation Container Record Status field. · Multiple FilesAction: Populate the .tcr Record Status field with the same value that is populated in the .hdr Transportation Container Record Status field.Error location: Multiple Files4897The .tcs Record Status field does not match the .hdr Transportation Container Status Record Status.Populate the .tcs Record Status field with the same value that is populated in the .hdr Transportation Container Status Record Status field. · Multiple FilesAction: Populate the .tcs Record Status field with the same value that is populated in the .hdr Transportation Container Status Record Status field.Error location: Multiple Files4898There can be no characters after the .tsr Closing Character field.Remove all characters after the .tsr Closing Character field. · .tsrAction: Remove all characters after the .tsr Closing Character field.Error location: .tsr4899There can be no characters after the .tgr Closing Character field.Remove all characters after the .tgr Closing Character field. · .tgrAction: Remove all characters after the .tgr Closing Character field.Error location: .tgr4900There can be no characters after the .tdr Closing Character field.Remove all characters after the .tdr Closing Character field. · .tdrAction: Remove all characters after the .tdr Closing Character field.Error location: .tdr4901There can be no characters after the .tcr Closing Character field.Remove all characters after the .tcr Closing Character field. · .tcrAction: Remove all characters after the .tcr Closing Character field.Error location: .tcr4902There can be no characters after the .tcs Closing Character field.Remove all characters after the .tcs Closing Character field. · .tcsAction: Remove all characters after the .tcs Closing Character field.Error location: .tcs4903The .tsr Closing Character value provided was {1}; it must contain # sign.Populate the .tsr Closing Character field with #. · .tsrAction: Populate the .tsr Closing Character field with #.Error location: .tsr4904The .tgr Closing Character value provided was {1}; it must contain # sign.Populate the .tgr Closing Character field with #. · .tgrAction: Populate the .tgr Closing Character field with #.Error location: .tgr4905The .tdr Closing Character value provided was {1}; it must contain # sign.Populate the .tdr Closing Character field with #. · .tdrAction: Populate the .tdr Closing Character field with #.Error location: .tdr4906The .tcr Closing Character value provided was {1}; it must contain # sign.Populate the .tcr Closing Character field with #. · .tcrAction: Populate the .tcr Closing Character field with #.Error location: .tcr4907The .tcs Closing Character value provided was {1}; it must contain # sign.Populate the .tcs Closing Character field with #. · .tcsAction: Populate the .tcs Closing Character field with #.Error location: .tcs4908The .tgr Status of Location provided was {1}. The .tgr Status of Location must be populated with P = Planned, O = Origin, I = In Transit, F = At Stop, U = Unscheduled Stop, M = Maintenance Stop, or D = Downtime.Populate the .tgr Status of Location with P, O, I, F, U, M or D. · .tgrAction: Populate the .tgr Status of Location with P, O, I, F, U, M or D.Error location: .tgr4909The .tdr Status of Stop provided was {1}. The .tdr Status of Stop must be populated with P = Planned, A = Arrived, or U = Unloaded.Populate the .tdr Status of Stop with P, A, or U. · .tdrAction: Populate the .tdr Status of Stop with P, A, or U.Error location: .tdr4910The .tcr Contents Barcode Type provided was {1}. The .tcr Contents Barcode Type must be populated with A = Imtb, B = Imcb, D = Impb, or O = Other.Populate the.tcr Contents Barcode Type with A, B, D, or O. · .tcrAction: Populate the.tcr Contents Barcode Type with A, B, D, or O.Error location: .tcr4911The .tcr Status of Contents Barcode provided was {1}. The .tcr Status of Contents Barcode must be populated with A = Planned-Pick-Up, B = Planned-Delivery, C = In-Transit, D = Delivered, E = Rejected, F = Cross-Docked, G = Picked-Up, H = Unloaded, or O = Other.Populate the.tcr Status of Contents Barcode with A, B, C, D, E, F, G, H, or O. · .tcrAction: Populate the.tcr Status of Contents Barcode with A, B, C, D, E, F, G, H, or O.Error location: .tcr4912The .tcr Impb Barcode Construct Code provided was {1}. The .tcr Impb Barcode Construct Code must be populated with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable.Populate the .tcr Impb Barcode Construct Code with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable. · .tcrAction: Populate the .tcr Impb Barcode Construct Code with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable.Error location: .tcr4913The .tcs Scan Event provided was {1}. The .tcs Scan Event must be populated with A = Planned-Pick-Up, B = Planned-Delivery, U = Unloaded, E = Rejected, L = Loading, F = Cross-Docked, G = Picked-Up, or O = Other.Populate the .tcs Scan Event with A, B, U, E, L, F, G, or O. · .tcsAction: Populate the .tcs Scan Event with A, B, U, E, L, F, G, or O.Error location: .tcs4914The .tcs Appointment Number Identifier provided was {1}. The .tcs Appointment Number Identifier must be populated with F = FAST Appointment, D = DMU Appointment, or O = Other Appointment Data.Populate the .tcs Appointment Number Identifier with F, D, or O. · .tcsAction: Populate the .tcs Appointment Number Identifier with F, D, or O.Error location: .tcs4915Job ID is a required field in the .tsr file.Populate the .tsr Job ID field. · .tsrAction: Populate the .tsr Job ID field.Error location: .tsr4916Transportation ID is a required field in the .tsr file.Populate the .tsr Transportation ID field. · .tsrAction: Populate the .tsr Transportation ID field.Error location: .tsr4917Load/Truck Dispatch Number is a required field in the .tsr file.Populate the .tsr Load/Truck Dispatch Number field. · .tsrAction: Populate the .tsr Load/Truck Dispatch Number field.Error location: .tsr4918Job ID is a required field in the .tgr file.Populate the .tgr Job ID field. · .tgrAction: Populate the .tgr Job ID field.Error location: .tgr4919Transportation ID is a required field in the .tgr file.Populate the .tgr Transportation ID field. · .tgrAction: Populate the .tgr Transportation ID field.Error location: .tgr4920Location Date/Time is a required field in the .tgr file.Populate the .tgr Location Date/Time field. · .tgrAction: Populate the .tgr Location Date/Time field.Error location: .tgr4921When provided, the .csm Transportation Carrier ID must be populated with a valid value.Populate the .csm Transportation Carrier ID with a valid value. · .csmAction: Populate the .csm Transportation Carrier ID with a valid value.Error location: .csm4922Status of Location is a required field in the .tgr file.Populate the .tgr Status of Location field. · .tgrAction: Populate the .tgr Status of Location field.Error location: .tgr4923Job ID is a required field in the .tdr file.Populate the .tdr Job ID field. · .tdrAction: Populate the .tdr Job ID field.Error location: .tdr4924Transportation ID is a required field in the .tdr file.Populate the .tdr Transportation ID field. · .tdrAction: Populate the .tdr Transportation ID field.Error location: .tdr4925Stop Designator is a required field in the .tdr file.Populate the .tdr Stop Designator field. · .tdrAction: Populate the .tdr Stop Designator field.Error location: .tdr4926Status of Stop is a required field in the .tdr file.Populate the .tdr Status of Stop field. · .tdrAction: Populate the .tdr Status of Stop field.Error location: .tdr4927Job ID is a required field in the .tcr file.Populate the .tcr Job ID field. · .tcrAction: Populate the .tcr Job ID field.Error location: .tcr4928Transportation ID is a required field in the .tcr file.Populate the .tcr Transportation ID field. · .tcrAction: Populate the .tcr Transportation ID field.Error location: .tcr4929Stop Designator is a required field in the .tcr file.Populate the .tcr Stop Designator field. · .tcrAction: Populate the .tcr Stop Designator field.Error location: .tcr4930Contents Barcode is a required field in the .tcr file.Populate the .tcr Contents Barcode field. · .tcrAction: Populate the .tcr Contents Barcode field.Error location: .tcr4931Contents Barcode Type is a required field in the .tcr file.Populate the .tcr Contents Barcode Type field. · .tcrAction: Populate the .tcr Contents Barcode Type field.Error location: .tcr4932Status of Contents Barcode is a required field in the .tcr file.Populate the .tcr Status of Contents Barcode field. · .tcrAction: Populate the .tcr Status of Contents Barcode field.Error location: .tcr4933Job ID is a required field in the .tcs file.Populate the .tcs Job ID field. · .tcsAction: Populate the .tcs Job ID field.Error location: .tcs4934Contents Barcode is a required field in the .tcs file.Populate the .tcs Contents Barcode field. · .tcsAction: Populate the .tcs Contents Barcode field.Error location: .tcs4935Scan Date/Time is a required field in the .tcs file.Populate the .tcs Scan Date/Time field · .tcsAction: Populate the .tcs Scan Date/Time fieldError location: .tcs4937The .tsr Target Ship Date/Time field must be within {1} days in the past or {2} days in the future from the submission date.Update the .tsr Target Ship Date/Time field. · .tsrAction: Update the .tsr Target Ship Date/Time field.Error location: .tsr4938The .tgr Location Date/Time field must be within {1} days in the past or {2} days in the future from the submission date.Update the .tgr Location Date/Time field. · .tgrAction: Update the .tgr Location Date/Time field.Error location: .tgr4939The .tdr Estimated Arrival Date/Time field must be within {1} days in the past or {2} days in the future from the submission date.Update the .tdr Estimated Arrival Date/Time field. · .tdrAction: Update the .tdr Estimated Arrival Date/Time field.Error location: .tdr4940The .tdr Actual Shipper Arrival Date/Time field must be within {1} days in the past or {2} days in the future from the submission date.Update the .tdr Actual Shipper Arrival Date/Time field. · .tdrAction: Update the .tdr Actual Shipper Arrival Date/Time field.Error location: .tdr4941The .tdr Actual Receiver Arrival Date/Time field must be within {1} days in the past or {2} days in the future from the submission date.Update the .tdr Actual Receiver Arrival Date/Time field. · .tdrAction: Update the .tdr Actual Receiver Arrival Date/Time field.Error location: .tdr4942The .tcr Actual Receiver Date/Time field must be within {1} days in the past or {2} days in the future from the submission date.Update the .tcr Actual Receiver Date/Time field. · .tcrAction: Update the .tcr Actual Receiver Date/Time field.Error location: .tcr4943The .tcs Scan Date/Time field must be within {1} days in the past or {2} days in the future from the submission date.Update the .tcs Scan Date/Time field. · .tcsAction: Update the .tcs Scan Date/Time field.Error location: .tcs4949Referential Integrity Error: The Job ID in the .tsr file does not match the Job ID in the .hdr file.Populate the .tsr Job ID field with the same value that is populated in the .hdr Job ID field. · Multiple FilesAction: Populate the .tsr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Multiple Files4950Referential Integrity Error: The Job ID in the .tgr file does not match the Job ID in the .hdr file.Populate the .tgr Job ID field with the same value that is populated in the .hdr Job ID field. · Multiple FilesAction: Populate the .tgr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Multiple Files4951Referential Integrity Error: The Job ID in the .tdr file does not match the Job ID in the .hdr file.Populate the .tdr Job ID field with the same value that is populated in the .hdr Job ID field. · Multiple FilesAction: Populate the .tdr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Multiple Files4952Referential Integrity Error: The Job ID in the .tcr file does not match the Job ID in the .hdr file.Populate the .tcr Job ID field with the same value that is populated in the .hdr Job ID field. · Multiple FilesAction: Populate the .tcr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Multiple Files4953Referential Integrity Error: The Job ID in the .tcs file does not match the Job ID in the .hdr file.Populate the .tcs Job ID field with the same value that is populated in the .hdr Job ID field. · Multiple FilesAction: Populate the .tcs Job ID field with the same value that is populated in the .hdr Job ID field.Error location: Multiple Files4954The value provided for the .tsr Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .tsr Record Status field with O, D, I or U. · .tsrAction: Populate the .tsr Record Status field with O, D, I or U.Error location: .tsr4955The value provided for the .tgr Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .tgr Record Status field with O, D, I or U. · .tgrAction: Populate the .tgr Record Status field with O, D, I or U.Error location: .tgr4956The value provided for the .tdr Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .tdr Record Status field with O, D, I or U. · .tdrAction: Populate the .tdr Record Status field with O, D, I or U.Error location: .tdr4957The value provided for the .tcr Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .tcr Record Status field with O, D, I or U. · .tcrAction: Populate the .tcr Record Status field with O, D, I or U.Error location: .tcr4958The value provided for the .tcs Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert, or U = Update.Populate the .tcs Record Status field with O, D, I or U. · .tcsAction: Populate the .tcs Record Status field with O, D, I or U.Error location: .tcs4960The .tdr Appointment Number Identifier provided was {1}. The .tdr Appointment Number Identifier must be populated with F = FAST Appointment, D = DMU Appointment, or O = Other Appointment Data.Populate the .tdr Appointment Number Identifier with F, D, or O. · .tdrAction: Populate the .tdr Appointment Number Identifier with F, D, or O.Error location: .tdr4961Transportation files (.tsr, .tgr, .tdr, .tcr, .tcs) are only supported with Mail.dat Version 19-1 and greater.Submit files using Mail.dat Version 19- 1. · Multiple FilesAction: Submit files using Mail.dat Version 19- 1.Error location: Multiple Files4962Referential Integrity Error: There cannot be duplicate primary keys in the .tsr file (Job ID, Transportation ID).Populate the .tsr Job ID and Transportation ID with unique values in the .tsr file. · .tsrAction: Populate the .tsr Job ID and Transportation ID with unique values in the .tsr file.Error location: .tsr4963Referential Integrity Error: There cannot be duplicate primary keys in the .tgr file (Job ID, Transportation ID, Location Date/Time).Populate the .tgr Job ID, Transportation ID, and Location Date/Time with unique values in the .tgr file. · .tgrAction: Populate the .tgr Job ID, Transportation ID, and Location Date/Time with unique values in the .tgr file.Error location: .tgr4964Referential Integrity Error: There cannot be duplicate primary keys in the .tdr file (Job ID, Transportation ID, Stop Designator).Populate the .tdr Job ID, Transportation ID, and Stop Designator with unique values in the .tdr file. · .tdrAction: Populate the .tdr Job ID, Transportation ID, and Stop Designator with unique values in the .tdr file.Error location: .tdr4965Referential Integrity Error: There cannot be duplicate primary keys in the .tcr file (Job ID, Transportation ID, Stop Designator, Contents Barcode).Populate the .tcr Job ID, Transportation ID, Stop Designator, and Contents Barcode with unique values in the .tcr file. · .tcrAction: Populate the .tcr Job ID, Transportation ID, Stop Designator, and Contents Barcode with unique values in the .tcr file.Error location: .tcr4966Referential Integrity Error: There cannot be duplicate primary keys in the .tcs file (Job ID, Contents Barcode, Scan Date/Time).Populate the .tcs Job ID, Contents Barcode, and Scan Date/Time with unique values in the .tcs file. · .tcsAction: Populate the .tcs Job ID, Contents Barcode, and Scan Date/Time with unique values in the .tcs file.Error location: .tcs4967Referential Integrity Error: The .tsr Transportation ID field does not match the .tdr Transportation ID.Populate the .tsr Transportation ID field with a value that matches the .tdr Transportation ID field. · Multiple FilesAction: Populate the .tsr Transportation ID field with a value that matches the .tdr Transportation ID field.Error location: Multiple Files4968Referential Integrity Error: The .tdr Transportation ID field does not match the .tcr Transportation ID.Populate the .tdr Transportation ID field with a value that matches the .tcr Transportation ID field. · Multiple FilesAction: Populate the .tdr Transportation ID field with a value that matches the .tcr Transportation ID field.Error location: Multiple Files4969Referential Integrity Error: The .tdr Stop Designator field does not match the .tcr Stop Designator.Populate the .tdr Stop Designator field with a value that matches the .tcr Stop Designator field. · Multiple FilesAction: Populate the .tdr Stop Designator field with a value that matches the .tcr Stop Designator field.Error location: Multiple Files4970Referential Integrity Error: The CQT Database ID in the .sfr file does not match the CQT Database ID in the .cqt file.Populate the .sfr CQT Database ID field with the same value that is populated in the .cqt CQT Database ID field. · Multiple FilesAction: Populate the .sfr CQT Database ID field with the same value that is populated in the .cqt CQT Database ID field.Error location: Multiple Files4971The .tsr Target Ship Date/Time field must be in ISO-8601 Format (YYYY-MM-DDThh:mm:ssTZD).Update the .tsr Target Ship Date/Time field. · .tsrAction: Update the .tsr Target Ship Date/Time field.Error location: .tsr4972The .tgr Location Date/Time field must be in ISO-8601 Format (YYYY-MM-DDThh:mm:ssTZD).Update the .tgr Location Date/Time field. · .tgrAction: Update the .tgr Location Date/Time field.Error location: .tgr4973The .tdr Estimated Arrival Date/Time field must be in ISO-8601 Format (YYYY-MM-DDThh:mm:ssTZD).Update the .tdr Estimated Arrival Date/Time field. · .tdrAction: Update the .tdr Estimated Arrival Date/Time field.Error location: .tdr4974The .tdr Actual Shipper Arrival Date/Time field must be in ISO-8601 Format (YYYY-MM-DDThh:mm:ssTZD).Update the .tdr Actual Shipper Arrival Date/Time field. · .tdrAction: Update the .tdr Actual Shipper Arrival Date/Time field.Error location: .tdr4975The .tdr Actual Receiver Arrival Date/Time field must be in ISO-8601 Format (YYYY-MM-DDThh:mm:ssTZD).Update the .tdr Actual Receiver Arrival Date/Time field. · .tdrAction: Update the .tdr Actual Receiver Arrival Date/Time field.Error location: .tdr4976The .tcr Actual Receiver Arrival Date/Time field must be in ISO-8601 Format (YYYY-MM-DDThh:mm:ssTZD).Update the .tcr Actual Receiver Arrival Date/Time field. · .tcrAction: Update the .tcr Actual Receiver Arrival Date/Time field.Error location: .tcr4977The .tcs Scan Date/Time field must be in ISO-8601 Format (YYYY-MM-DDThh:mm:ssTZD).Update the .tcs Scan Date/Time field. · .tcsAction: Update the .tcs Scan Date/Time field.Error location: .tcs4978The .tgr Latitude field must be in XX.XXXXXXXX format.Update the .tgr Latitude field. · .tgrAction: Update the .tgr Latitude field.Error location: .tgr4979The .tgr Longitude field must be in XXX.XXXXXXXX format.Update the .tgr Longitude field. · .tgrAction: Update the .tgr Longitude field.Error location: .tgr4980The .tcs Latitude field must be in XX.XXXXXXXX format.Update the .tcs Latitude field. · .tcsAction: Update the .tcs Latitude field.Error location: .tcs4981The .tcs Longitude field must be in XXX.XXXXXXXX format.Update the .tcs Longitude field. · .tcsAction: Update the .tcs Longitude field.Error location: .tcs4982The .hdr Transportation Summary Record Status is a required field in the .hdr file.Populate the .hdr Transportation Summary Record Status field. · .hdrAction: Populate the .hdr Transportation Summary Record Status field.Error location: .hdr4983The .hdr Transportation Geo-Data Record Status is a required field in the .hdr file.Populate the .hdr Transportation Geo-Data Record Status field. · .hdrAction: Populate the .hdr Transportation Geo-Data Record Status field.Error location: .hdr4984The .hdr Transportation Detail Record Status is a required field in the .hdr file.Populate the .hdr Transportation Detail Record Status field, · .hdrAction: Populate the .hdr Transportation Detail Record Status field,Error location: .hdr4985The .hdr Transportation Container Record Status is a required field in the .hdr file.Populate the .hdr Transportation Container Record Status field. · .hdrAction: Populate the .hdr Transportation Container Record Status field.Error location: .hdr4986The .hdr Transportation Container Status Record Status is a required field in the .hdr file.Populate the .hdr Transportation Container Status Record Status field. · .hdrAction: Populate the .hdr Transportation Container Status Record Status field.Error location: .hdr4987Required Field Missing: Closing Character is a required field in the .tsr file.Populate the .tsr Closing Character field. · .tsrAction: Populate the .tsr Closing Character field.Error location: .tsr4988Required Field Missing: Closing Character is a required field in the .tgr file.Populate the .tgr Closing Character field. · .tgrAction: Populate the .tgr Closing Character field.Error location: .tgr4989Required Field Missing: Closing Character is a required field in the .tdr file.Populate the .tdr Closing Character field. · .tdrAction: Populate the .tdr Closing Character field.Error location: .tdr4990Required Field Missing: Closing Character is a required field in the .tcr file.Populate the .tcr Closing Character field. · .tcrAction: Populate the .tcr Closing Character field.Error location: .tcr4991Required Field Missing: Closing Character is a required field in the .tcs file.Populate the .tcs Closing Character field. · .tcsAction: Populate the .tcs Closing Character field.Error location: .tcs4992Required Field Missing: Closing Character is a required field in the .sfr file.Populate the .sfr Closing Character field. · .sfrAction: Populate the .sfr Closing Character field.Error location: .sfr4994Required Field Missing: Closing Character is a required field in the .rms file.Populate the .rms Closing Character field. · .rmsAction: Populate the .rms Closing Character field.Error location: .rms4995Required Field Missing: Closing Character is a required field in the .rmr file.Populate the .rmr Closing Character field. · .rmrAction: Populate the .rmr Closing Character field.Error location: .rmr4996Required Field Missing: Closing Character is a required field in the .rmb file.Populate the .rmb Closing Character field. · .rmbAction: Populate the .rmb Closing Character field.Error location: .rmb4997Required Field Missing: Closing Character is a required field in the .upa file.Populate the .upa Closing Character field. · .upaAction: Populate the .upa Closing Character field.Error location: .upa4998Required Field Missing: TSR Record Status is a required field in the .tsr file.Populate the .tsr Record Status field. · .tsrAction: Populate the .tsr Record Status field.Error location: .tsr4999Required Field Missing: TGR Record Status is a required field in the .tgr file.Populate the .tgr Record Status field. · .tgrAction: Populate the .tgr Record Status field.Error location: .tgr5000Required Field Missing: TDR Record Status is a required field in the .tdr file.Populate the .tdr Record Status field. · .tdrAction: Populate the .tdr Record Status field.Error location: .tdr5001Required Field Missing: TCR Record Status is a required field in the .tcr file.Populate the .tcr Record Status field. · .tcrAction: Populate the .tcr Record Status field.Error location: .tcr5002Required Field Missing: TCS Record Status is a required field in the .tcs file.Populate the .tcs Record Status field. · .tcsAction: Populate the .tcs Record Status field.Error location: .tcs5003Required Field Missing: MPU Record Status is a required field in the .mpu file.Populate the .mpu Record Status field. · .mpuAction: Populate the .mpu Record Status field.Error location: .mpu5004Required Field Missing: CCR Record Status is a required field in the .ccr file.Populate the .ccr Record Status field. · .ccrAction: Populate the .ccr Record Status field.Error location: .ccr5005Required Field Missing: UPA Record Status is a required field in the .upa file.Populate the .upa Record Status field. · .upaAction: Populate the .upa Record Status field.Error location: .upa5006Required Field Missing: SFR Record Status is a required field in the .sfr file.Populate the .sfr Record Status field. · .sfrAction: Populate the .sfr Record Status field.Error location: .sfr5007Required Field Missing: RMR Record Status is a required field in the .rmr file.Populate the .rmr Record Status field. · .rmrAction: Populate the .rmr Record Status field.Error location: .rmr5008Required Field Missing: RMS Record Status is a required field in the .rms file.Populate the .rms Record Status field. · .rmsAction: Populate the .rms Record Status field.Error location: .rms5009Required Field Missing: RMB Record Status is a required field in the .rmb file.Populate the .rmb Record Status field. · .rmbAction: Populate the .rmb Record Status field.Error location: .rmb5010Referential Integrity Error: When a .tdr file is present, a .tsr file must be included in the submission.Include the .tsr file. · Multiple FilesAction: Include the .tsr file.Error location: Multiple Files5011Referential Integrity Error: When a .tcr file is present, a .tdr file must be included in the submission.Include the .tdr file. · Multiple FilesAction: Include the .tdr file.Error location: Multiple Files5012Referential Integrity Error: When a .tgr file is present, a .tsr file must be included in the submission.Include the .tsr file. · Multiple FilesAction: Include the .tsr file.Error location: Multiple Files5013Required Field Missing: SFB Record Status is a required field in the .sfb file.Populate the .sfb Record Status field. · .sfbAction: Populate the .sfb Record Status field.Error location: .sfb5014Required Field Missing: Barcode Type is a required field in the .sfb file.Populate the .sfb Barcode Type field.Action: Populate the .sfb Barcode Type field.5015The .sfb Barcode Type provided was {1}. The .sfb Barcode Type must be populated with E = Extra Barcode or F = Fee Barcode.Populate the .sfb Barcode Type with E or F. · .sfbAction: Populate the .sfb Barcode Type with E or F.Error location: .sfb5016When the .cpt Approved Piece Design Type is populated, it must contain C = CSR or P = PCSC.Populate the .cpt Approved Piece Design Type with C or P. · .cptAction: Populate the .cpt Approved Piece Design Type with C or P.Error location: .cpt5017Numeric Data Type Error: The .cpt Approved Piece Design field must be populated with a numeric value (when populated).Populate the .cpt Approved Piece Design field with a numeric value. · .cptAction: Populate the .cpt Approved Piece Design field with a numeric value.Error location: .cpt5018Campaign Serial Grouping is a required field in the .rms file.Populate the .rms Campaign Serial Grouping field. · .rmsAction: Populate the .rms Campaign Serial Grouping field.Error location: .rms5019The .csm Entry Point for Entry Discount – Facility Type field must be populated with S = DSCF or D = DDU when multiple .mpu Mail Piece Unit – Classes, including 4 = Pkg Services, exist within a single container. The value provided was {1}.Populate the .csm Entry Point for Entry Discount – Facility Type with S = DSCF or D = DDU. · Multiple FilesAction: Populate the .csm Entry Point for Entry Discount – Facility Type with S = DSCF or D = DDU.Error location: Multiple Files5022Payment Account Number {1} not active for purchase.Review payment account. · Multiple FilesAction: Review payment account.Error location: Multiple Files5023Payment Account Number {1} does not have an active primary payment method for purchase.Review payment account. · Multiple FilesAction: Review payment account.Error location: Multiple Files5024Payment Account Number {1} does not have a primary payment method.Review payment account. · Multiple FilesAction: Review payment account.Error location: Multiple Files5026To be eligible for the Informed Delivery incentive, the .csm Postage Statement Mailing Date must fall within the .rms Date Start and .rms Date End or within the .csm Referenceable Mail Start Date and .csm Referenceable Mail End Date.Update the .csm Postage Statement Mailing Date. · Multiple FilesAction: Update the .csm Postage Statement Mailing Date.Error location: Multiple Files5027The Component ID referenced in the .mcr Host Statement Component ID field must have the same mail class as the corresponding .mcr Mail Piece Unit ID.Update the .mcr Host Statement Component ID. · Multiple FilesAction: Update the .mcr Host Statement Component ID.Error location: Multiple Files5028To be eligible for the Informed Delivery incentive, the number of pieces tied to .rmr records must be greater than or equal to {1} percent threshold. The current percentage is {2}.Update the .rmr file. · Multiple FilesAction: Update the .rmr file.Error location: Multiple Files5033For an Informed Delivery Campaign, the .rms Date End or the .csm Referenceable Mail End Date cannot be in the past: {1}.Populate the corresponding .rms Date End with a future date. · Multiple FilesAction: Populate the corresponding .rms Date End with a future date.Error location: Multiple Files5034For an Informed Delivery Campaign, the .rms Date End or the .csm Referenceable Mail End Date cannot be before the .rms Date Start or the .csm Referenceable Mail Start Date: {1}.Populate the .rms Date End with a date after the .rms Date Start. · Multiple FilesAction: Populate the .rms Date End with a date after the .rms Date Start.Error location: Multiple Files5035For an Informed Delivery Campaign, the .rms Date End or the .csm Referenceable Mail End Date cannot be the same as the .rms Date Start or the .csm Referenceable Mail Start Date: {1}.Populate the .rms Date End with a date after the .rms Date Start. · Multiple FilesAction: Populate the .rms Date End with a date after the .rms Date Start.Error location: Multiple Files5036For an Informed Delivery Campaign, the .rmb RMB Value must be formatted properly with an https:// address (https://www.url.com/image.jpg): {1}.Populate the .rmb RMB Value with a properly formatted URL. · .rmbAction: Populate the .rmb RMB Value with a properly formatted URL.Error location: .rmb5052When representing a .pbc PBC Unique ID in the .sfr Piece ID field, right-justify and zero fill the .sfr Piece ID.Right-justify and zero fill the .sfr Piece ID · Multiple FilesAction: Right-justify and zero fill the .sfr Piece IDError location: Multiple Files5057Required Field Missing: Scheduled Induction End Date is a required field in the .csm file when Scheduled Induction End Time is present.Populate the .csm Scheduled Induction End Date field when the .csm Scheduled Induction End Time field is populated. · .csmAction: Populate the .csm Scheduled Induction End Date field when the .csm Scheduled Induction End Time field is populated.Error location: .csm5060The .mpu Impb Barcode Construct Code provided was {1}. The .mpu Impb Barcode Construct Code must be populated with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable.Populate the .mpu Impb Barcode Construct Code with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable. · .mpuAction: Populate the .mpu Impb Barcode Construct Code with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable.Error location: .mpu5061The .mpu Impb Barcode Construct Code must be populated when an Impb is used in the .mpu Grouped Extra Service Barcode field.Populate the .mpu Impb Barcode Construct Code with a valid Impb Barcode Construct Code type. · .mpuAction: Populate the .mpu Impb Barcode Construct Code with a valid Impb Barcode Construct Code type.Error location: .mpu5062The .mpu Grouped Extra Service Barcode field must be populated with a valid Impb when the .mpu Impb Barcode Construct Code is populated.Populate the .mpu Grouped Extra Service Barcode field with a valid Impb. · .mpuAction: Populate the .mpu Grouped Extra Service Barcode field with a valid Impb.Error location: .mpu5063The .sfb Impb Barcode Construct Code provided was {1}. The .sfb Impb Barcode Construct Code must be populated with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable.Populate the .sfb Impb Barcode Construct Code with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable. · .sfbAction: Populate the .sfb Impb Barcode Construct Code with A = C01, B = C02, C = C03, D = C04, E = C05, F = C06, G = C07, H = C08, I = C09, J = C10, K = N01, L = N02, M = N03, N = N04, O = N05, P = N06, Q = L01, R = L02, S = L03, T = L04, or Blank = Not applicable.Error location: .sfb5064The .sfb Impb Barcode Construct Code must be populated when an Impb is used in the .sfb Barcode field.Populate the .sfb Impb Barcode Construct Code with a valid Impb Barcode Construct Code type. · .sfbAction: Populate the .sfb Impb Barcode Construct Code with a valid Impb Barcode Construct Code type.Error location: .sfb5065The .sfb Barcode field must be populated with a valid Impb when the .sfb Impb Barcode Construct Code is populated.Populate the .sfb Barcode field with a valid Impb. · .sfbAction: Populate the .sfb Barcode field with a valid Impb.Error location: .sfb5066Date Data Type Error: Informed Address Expire Date must be a valid date value formatted as YYYYMMDD in the .seg file.Populate the .seg Informed Address Expire Date field with a valid date value formatted as YYYYMMDD. · .segAction: Populate the .seg Informed Address Expire Date field with a valid date value formatted as YYYYMMDD.Error location: .seg5068Alphanumeric Data Type Error: USPS Campaign ID must be an alphanumeric value in the .rms file (when populated).Populate the .rms USPS Campaign ID with an alphanumeric value when populated. · .rmsAction: Populate the .rms USPS Campaign ID with an alphanumeric value when populated.Error location: .rms5069The .mpu Grouped Extra Service Type provided was {1}. It must contain B = Certificate of Bulk Mailing or F = Certificate of Mailing Firm Book when populated.Populate the .mpu Grouped Extra Service Type with B or F when populated. · .mpuAction: Populate the .mpu Grouped Extra Service Type with B or F when populated.Error location: .mpu5070Required Field Missing: Informed Address Indicator is a required field in the .seg file.Populate the .seg Informed Address Indicator field with Y = Yes or N = No. · .segAction: Populate the .seg Informed Address Indicator field with Y = Yes or N = No.Error location: .seg5071The .seg Informed Address Indicator field must be populated with Y = Yes or N = No.Populate .seg Informed Address Indicator field with Y = Yes or N = No. · .segAction: Populate .seg Informed Address Indicator field with Y = Yes or N = No.Error location: .seg5072When the .seg Informed Address Indicator is Y = Yes, the .seg Informed Address Expiration Date must be populated.Populate the .seg Informed Address Expire Date. · .segAction: Populate the .seg Informed Address Expire Date.Error location: .seg5076The .mpu Machinability Indicator - {1} and .mpu MPU Surcharge - {2} combination is not valid.Verify that the .mpu Machinability Indicator and .mpu MPU Surcharge are populated with values in a valid combination. · .mpuAction: Verify that the .mpu Machinability Indicator and .mpu MPU Surcharge are populated with values in a valid combination.Error location: .mpu5082The .mpu Mail Piece Unit - Weight field must be populated with a value that is less than or equal to 1 oz when the .mpu Mail Piece Unit - Class field is populated with 1=First Class, the .mpu Mail Piece Unit - Processing Category field is populated with LT = Letters and the .ccr characteristic is populated with RT = Round Trip. The value provided was {1}.Populate the .mpu Mail Piece Unit - Weight field with a value that is less than or equal to 1 oz when the .mpu Mail Piece Unit - Class field is populated with 1, the .mpu Mail Piece Unit - Processing Category field is populated with LT = Letters and the .ccr characteristic is populated with RT = Round Trip. · .mpuAction: Populate the .mpu Mail Piece Unit - Weight field with a value that is less than or equal to 1 oz when the .mpu Mail Piece Unit - Class field is populated with 1, the .mpu Mail Piece Unit - Processing Category field is populated with LT = Letters and the .ccr characteristic is populated with RT = Round Trip.Error location: .mpu5083The .mpu Mail Piece Unit - Weight field must be populated with a value that is less than or equal to 2 oz when the .mpu Mail Piece Unit - Class field is populated with 1 = First Class and the .mpu Mail Piece Unit - Processing Category field is populated with FL = Flats , the .ccr characteristic is populated with RT = Round Trip and the .hdr Mail.dat Presentation Category is not populated with N = Single Piece. The value provided was {1}.Populate the .mpu Mail Piece Unit - Weight field with a value that is less than or equal to 2 oz when the .mpu Mail Piece Unit - Class field is populated with 1 and the .mpu Mail Piece Unit - Processing Category field is populated with FL = Flats, the .ccr characteristic is populated with RT = Round Trip and the .hdr Mail.dat Presentation Category is not populated with N = Single Piece. · .mpuAction: Populate the .mpu Mail Piece Unit - Weight field with a value that is less than or equal to 2 oz when the .mpu Mail Piece Unit - Class field is populated with 1 and the .mpu Mail Piece Unit - Processing Category field is populated with FL = Flats, the .ccr characteristic is populated with RT = Round Trip and the .hdr Mail.dat Presentation Category is not populated with N = Single Piece.Error location: .mpu5084Referential Integrity Error: The .pdr CQT Database ID does not exist in the .cqt file.Update the .pdr CQT Database ID field to match the .cqt file. · .pdrAction: Update the .pdr CQT Database ID field to match the .cqt file.Error location: .pdr5088The .csm Container Level value provided was {1}; it must contain A = CR-Direct, B = Mixed CR in 5 Digit, D = CR - 5D Scheme, G = 5 Digit (Auto/Presort), H = 5 Digit (Merged), I = 5 Digit (Presort Only), J = 5 Digit (Barcode only), M = 5D Scheme (Presort), N = 5D Scheme (Auto, Presort), P = 5D Scheme (Barcode), or Q = 5D Scheme (Merged) when the .mpu Mail Piece Unit - Class is populated with 2 = Periodicals, 3 = Std Mail or 5 = Per Pending, the .mpu Mail Piece Unit - Processing Category is populated with FL = Flat, the .csm Entry Point for Entry Discount - Facility Type is populated with D = DDU, and the .csm Container Type is populated with 1 = #1 Sack, 2 = #2 Sack, 3 = #3 Sack, 4 = 01V Sack, 5 = 03V Sack, S = Sack (general) or V = Sack (Virtual).Populate the .csm Container Level with A, B, D, G, H, I, J, M, N, P or Q. · .csmAction: Populate the .csm Container Level with A, B, D, G, H, I, J, M, N, P or Q.Error location: .csm5089The .csm Entry Point for Entry Discount - Facility Type value provided was {1}; it must contain S = DSCF or D = DDU when the .mpu Mail Piece Unit - Class is populated with 2 = Periodicals, 3 = Std Mail or 5 = Per Pending, the .mpu Mail Piece Unit - Processing Category is populated with FL = Flat, and the .csm Container Type is populated with 1 = #1 Sack, 2 = #2 Sack, 3 = #3 Sack, 4 = 01V Sack, 5 = 03V Sack, S = Sack (general) or V = Sack (Virtual).Populate the .csm Entry Point for Entry Discount - Facility Type with S or D. · .csmAction: Populate the .csm Entry Point for Entry Discount - Facility Type with S or D.Error location: .csm5090The .csm Container Level value provided was {1}; it must contain A = CR-Direct, B = Mixed CR in 5 Digit, D = CR - 5D Scheme, C = Mixed CR in 3 Digit, R = 3 Digit (Auto, Presort), S = 3 Digit (Barcode), T = 3 Digit (Presort), U = 3 Digit (CR, Auto, Presort), X = SCF, G = 5 Digit (Auto/Presort), H = 5 Digit (Merged), I = 5 Digit (Presort Only), J = 5 Digit (Barcode only), M = 5D Scheme (Presort), N = 5D Scheme (Auto, Presort), P = 5D Scheme (Barcode), or Q = 5D Scheme (Merged) when the .mpu Mail Piece Unit - Class is populated with 2 = Periodicals, 3 = Std Mail or 5 = Per Pending, the .mpu Mail Piece Unit - Processing Category is populated with FL = Flat, the .csm Entry Point for Entry Discount - Facility Type is populated with S = DSCF, and the .csm Container Type is populated with 1 = #1 Sack, 2 = #2 Sack, 3 = #3 Sack, 4 = 01V Sack, 5 = 03V Sack, S = Sack (general) or V = Sack (Virtual).Populate the .csm Container Level with A, B, D, C, R, S, T, U, X, G, H, I, J, M, N, P, or Q. · .csmAction: Populate the .csm Container Level with A, B, D, C, R, S, T, U, X, G, H, I, J, M, N, P, or Q.Error location: .csm5091The .csm Parent Container Reference ID must be empty when the .mpu Mail Piece Unit - Class is populated with 2 = Periodicals, 3 = Std Mail or 5 = Per Pending, the .mpu Mail Piece Unit - Processing Category is populated with FL = Flat, the .csm Entry Point for Entry Discount - Facility Type is populated with S = DSCF, the .csm Container Type is populated with 1 = #1 Sack, 2 = #2 Sack, 3 = #3 Sack, 4 = 01V Sack, 5 = 03V Sack, S = Sack (general), V = Sack (Virtual), and the .csm Container Level is populated with C = Mixed CR in 3 Digit, R = 3 Digit (Auto, Presort), S =3 Digit (Barcode) , T = 3 Digit (Presort) , U = 3 Digit (CR, Auto, Presort), X = SCF.Remove the .csm Parent Container Reference ID. · .csmAction: Remove the .csm Parent Container Reference ID.Error location: .csm5092When the .hdr Mail.dat Presentation Category is populated with I = Informed Delivery then the .rms Campaign Serial Grouping cannot be populated with S.Update the .rms file. · .rmsAction: Update the .rms file.Error location: .rms5093Duplicate Record Found: Each .wsr record must have a unique combination of Segment ID, Package Zip Code, Package CR Number, and Co-Palletization Code.Populate each record in the .oci file with a unique combination of Segment ID, Package Zip Code, Package CR Number, and Co-Palletization Code. · .wsrAction: Populate each record in the .oci file with a unique combination of Segment ID, Package Zip Code, Package CR Number, and Co-Palletization Code.Error location: .wsr5095For Informed Delivery Campaigns, across the .rms file the .rms Campaign Serial Grouping cannot be populated with both C and S.Populate all .rms Campaign Serial Grouping with either C or S. · .rmsAction: Populate all .rms Campaign Serial Grouping with either C or S.Error location: .rms5096For an Informed Delivery Campaign, when the .rms Campaign Serial Grouping is populated with S, then the .pdr Piece Barcode must be populated with an eleven-digit numeric value. The value provided was {1}.Populate the .pdr Piece Barcode with an eleven-digit numeric value. · .pdrAction: Populate the .pdr Piece Barcode with an eleven-digit numeric value.Error location: .pdr5097For an Informed Delivery Campaign, when the .rms Campaign Serial Grouping is populated with S, then the .pdr file is required.Include a .pdr file in the mailing. · .rmsAction: Include a .pdr file in the mailing.Error location: .rms5098For an Informed Delivery Campaign, the .rms Date Start or the .csm Referenceable Mail Start Date cannot be more than {1} days out from the submission date.Update the .rms Date Start. · Multiple FilesAction: Update the .rms Date Start.Error location: Multiple Files5099For an Informed Delivery Campaign, when the .rms Campaign Serial Grouping is populated with S, then the .rms Date End or the .csm Referenceable Mail End Date cannot be more than {1} days out from the .rms Date Start or the .csm Referenceable Mail Start.Populate the .rms Date End with a valid date. · Multiple FilesAction: Populate the .rms Date End with a valid date.Error location: Multiple Files6000For an Informed Delivery Campaign, when the .rms Campaign Serial Grouping is populated with C, and no IMb are provided, then the .rms Date End or the .csm Referenceable Mail End Date cannot be more than {1} days out from the .rms Date Start or the .csm Referenceable Mail Start.Populate the .rms Date End with a valid date. · Multiple FilesAction: Populate the .rms Date End with a valid date.Error location: Multiple Files6001For an Informed Delivery Campaign, when the .rms Campaign Serial Grouping is populated with C, then the .rms Date End or the .csm Referenceable Mail End Date cannot be more than {1} days out from the .rms Date Start or the .csm Referenceable Mail Start.Populate the .rms Date End with a valid date. · Multiple FilesAction: Populate the .rms Date End with a valid date.Error location: Multiple Files6002For an Informed Delivery Campaign, when the .rms Campaign Serial Grouping is populated with S, then the number of .cqt Rate Category A = Saturation pieces tied to the campaign must be greater than or equal to {1} percent threshold across the Mail Piece Unit. The current percentage is {2}.Update the number of saturation pieces tied to the campaign. · Multiple FilesAction: Update the number of saturation pieces tied to the campaign.Error location: Multiple Files6003The .cqt Rate Category field value provided was {1}; it must contain G = 5 Digit, P7 = NDC, PM = SCF, or S = Single Piece when the .mpu Mail Piece Unit - Class field is populated with 4 = Pkg Services and the .mpu Mail Piece Unit - Rate Type field is populated with D = Parcel Select.Populate the .cqt Rate Category with G, P7, PM, or S for when the .mpu Mail Piece Unit - Class field is populated with 4 and the .mpu Mail Piece Unit - Rate Type field is populated with D. · .cqtAction: Populate the .cqt Rate Category with G, P7, PM, or S for when the .mpu Mail Piece Unit - Class field is populated with 4 and the .mpu Mail Piece Unit - Rate Type field is populated with D.Error location: .cqt6004For an Informed Delivery Campaign, when the .rms Campaign Serial Grouping is populated with S, then the .rmr RMR ID Type must be C = CPT.Populate the .rmr RMR ID Type with C. · .rmrAction: Populate the .rmr RMR ID Type with C.Error location: .rmr6005Required Field Missing: Job ID is a required field in the .cbr file.Populate the .cbr Job ID field. · .cbrAction: Populate the .cbr Job ID field.Error location: .cbr6006Required Field Missing: Certificate Of Mailing Header ID is a required field in the .cbr file.Populate the .cbr Certificate Of Mailing Header ID field. · .cbrAction: Populate the .cbr Certificate Of Mailing Header ID field.Error location: .cbr6007Required Field Missing: Bulk Record ID is a required field in the .cbr file.Populate the .cbr Bulk Record ID field. · .cbrAction: Populate the .cbr Bulk Record ID field.Error location: .cbr6008Required Field Missing: Number of Identical Pieces is a required field in the .cbr file.Populate the .cbr Number of Identical Pieces field. · .cbrAction: Populate the .cbr Number of Identical Pieces field.Error location: .cbr6009Required Field Missing: Class of Mail is a required field in the .cbr file.Populate the .cbr Class of Mail field. · .cbrAction: Populate the .cbr Class of Mail field.Error location: .cbr6010Required Field Missing: Number of Pieces to the Pound is a required field in the .cbr file.Populate the .cbr Number of Pieces to the Pound field. · .cbrAction: Populate the .cbr Number of Pieces to the Pound field.Error location: .cbr6011Required Field Missing: Total Number of Pounds is a required field in the .cbr file.Populate the .cbr Total Number of Pounds field. · .cbrAction: Populate the .cbr Total Number of Pounds field.Error location: .cbr6012Required Field Missing: Total Postage Paid for Mailpieces is a required field in the .cbr file.Populate the .cbr Total Postage Paid for Mailpieces field. · .cbrAction: Populate the .cbr Total Postage Paid for Mailpieces field.Error location: .cbr6013Required Field Missing: CBR Record Status is a required field in the .cbr file.Populate the .cbr CBR Record Status field. · .cbrAction: Populate the .cbr CBR Record Status field.Error location: .cbr6014Required Field Missing: Closing Character is a required field in the .cbr file.Populate the .cbr Closing Character field. · .cbrAction: Populate the .cbr Closing Character field.Error location: .cbr6015For .cbr File Processing, the .cbr Closing Character field contains an invalid value; it must contain #.Remove all characters after the .cbr Closing Character. · .cbrAction: Remove all characters after the .cbr Closing Character.Error location: .cbr6016There can be no characters after the .cbr Closing Character.Remove all characters after the .cbr Closing Character. · .cbrAction: Remove all characters after the .cbr Closing Character.Error location: .cbr6017The value provided for the .cbr CBR Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert or U = Update.Populate the .cbr CBR Record Status field. · .cbrAction: Populate the .cbr CBR Record Status field.Error location: .cbr6018The .cbr Number of Identical Pieces field must be populated with a numeric value.Populate the .cbr Number of Identical Pieces field with a numeric value. · .cbrAction: Populate the .cbr Number of Identical Pieces field with a numeric value.Error location: .cbr6019The value provided for the .cbr Class of Mail field was {1}; it must contain 1 = First Class, 3= Std Mail, 4 = Pkg Services, or 9 = Other.Populate the .cbr Class of Mail field with 1, 3, 4, or 9. · .cbrAction: Populate the .cbr Class of Mail field with 1, 3, 4, or 9.Error location: .cbr6020The .cbr Number of Pieces to the Pound field must be populated with a numeric value.Populate the .cbr Number of Pieces to the Pound field with a numeric value. · .cbrAction: Populate the .cbr Number of Pieces to the Pound field with a numeric value.Error location: .cbr6021The .cbr Total Number of Pounds field must be populated with a numeric value.Populate the .cbr Total Number of Pounds field with a numeric value. · .cbrAction: Populate the .cbr Total Number of Pounds field with a numeric value.Error location: .cbr6022The .cbr Fee Paid field must be populated with a numeric value.Populate the .cbr Fee Paid field with a numeric value. · .cbrAction: Populate the .cbr Fee Paid field with a numeric value.Error location: .cbr6023The .cbr Total Postage Paid for Mailpieces field must be populated with a numeric value.Populate the .cbr Total Postage Paid for Mailpieces field with a numeric value. · .cbrAction: Populate the .cbr Total Postage Paid for Mailpieces field with a numeric value.Error location: .cbr6024The .cbr CBR Record Status field does not match the .hdr Certificate of Mailing Bulk Status field.Populate the .cbr CBR Record Status field with the same value that is populated in the .hdr Certificate of Mailing Services Bulk field. · .cbrAction: Populate the .cbr CBR Record Status field with the same value that is populated in the .hdr Certificate of Mailing Services Bulk field.Error location: .cbr6025The .hdr Certificate of Mailing Bulk Record Count field must match the Record Count of the Certificate of Mailing Bulk File.Populate the Certificate of Mailing Bulk Record Count field with a value that is equal to the Record Count of the Certificate of Mailing Bulk File. · .cbrAction: Populate the Certificate of Mailing Bulk Record Count field with a value that is equal to the Record Count of the Certificate of Mailing Bulk File.Error location: .cbr6026The .cbr Job ID field does not match the .hdr Job ID field.Populate the .cbr Job ID field with the same value that is populated in the .hdr Job ID field. · .cbrAction: Populate the .cbr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: .cbr6027The .cbr Certificate Of Mailing Header ID ID field does not match the .chr Certificate of Mailing Header ID field.Populate the .cbr Certificate Of Mailing Header ID field with the same value that is populated in the .hdr Certificate of Mailing Header ID field. · .cbrAction: Populate the .cbr Certificate Of Mailing Header ID field with the same value that is populated in the .hdr Certificate of Mailing Header ID field.Error location: .cbr6028Referential Integrity Error: There cannot be duplicate primary keys in the .cbr file (Job ID, Certificate Of Mailing Header ID, and Bulk Record ID).Populate the .cbr Job ID, Certificate Of Mailing Header ID, and COM Bulk Record ID fields with unique values in the .cbr file. · .cbrAction: Populate the .cbr Job ID, Certificate Of Mailing Header ID, and COM Bulk Record ID fields with unique values in the .cbr file.Error location: .cbr6029Required Field Missing: Job ID is a required field in the .cdr file.Populate the .cdr Job ID field. · .cdrAction: Populate the .cdr Job ID field.Error location: .cdr6030Required Field Missing: Certificate Of Mailing Header ID is a required field in the .cdr file.Populate the .cdr Certificate Of Mailing Header ID field. · .cdrAction: Populate the .cdr Certificate Of Mailing Header ID field.Error location: .cdr6031Required Field Missing: COM Piece ID is a required field in the .cdr file.Populate the .cdr COM Piece ID field. · .cdrAction: Populate the .cdr COM Piece ID field.Error location: .cdr6032Required Field Missing: Firm Specific ID is a required field in the .cdr file.Populate the .cdr Firm Specific ID field. · .cdrAction: Populate the .cdr Firm Specific ID field.Error location: .cdr6033Required Field Missing: Recipient Name is a required field in the .cdr file.Populate the .cdr Recipient Name field. · .cdrAction: Populate the .cdr Recipient Name field.Error location: .cdr6034Required Field Missing: Primary Address a required field in the .cdr file.Populate the .cdr Primary Address field. · .cdrAction: Populate the .cdr Primary Address field.Error location: .cdr6035Required Field Missing: City is a required field in the .cdr file.Populate the .cdr City field. · .cdrAction: Populate the .cdr City field.Error location: .cdr6037Required Field Missing: Postal Code is a required field in the .cdr file.Populate the .cdr Postal Code field. · .cdrAction: Populate the .cdr Postal Code field.Error location: .cdr6038Required Field Missing: Postage is a required field in the .cdr file.Populate the .cdr Postage field. · .cdrAction: Populate the .cdr Postage field.Error location: .cdr6039Required Field Missing: CDR Record Status is a required field in the .cdr file.Populate the .cdr CDR Record Status field. · .cdrAction: Populate the .cdr CDR Record Status field.Error location: .cdr6040Required Field Missing: Closing Character is a required field in the .cdr file.Populate the .cdr Closing Character field. · .cdrAction: Populate the .cdr Closing Character field.Error location: .cdr6041For .cdr File Processing, the .cdr Closing Character field contains an invalid value; it must contain #.Populate the .cdr Closing Character field with #. · .cdrAction: Populate the .cdr Closing Character field with #.Error location: .cdr6042There can be no characters after the .cdr Closing Character.Remove all characters after the .cdr Closing Character. · .cdrAction: Remove all characters after the .cdr Closing Character.Error location: .cdr6043The value provided for the .cdr CDR Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert or U = Update.Populate the .cdr CDR Record Status field. · .cdrAction: Populate the .cdr CDR Record Status field.Error location: .cdr6044The .cdr Postal Code field must be populated with exactly five, nine, or eleven numeric characters.Populate the .cdr Postal Code field with 5, 9, or 11 numeric characters. · .cdrAction: Populate the .cdr Postal Code field with 5, 9, or 11 numeric characters.Error location: .cdr6045The .cdr Fee field must be populated with a numeric value.Populate the .cdr Fee field with a numeric value. · .cdrAction: Populate the .cdr Fee field with a numeric value.Error location: .cdr6046The value provided for the .cdr PAL Fee Indicator field was {1}; it must contain A = 2 pounds, B = 3 pounds, C = 4 pounds, or D = 30 pounds.Populate the .cdr PAL Fee Indicator field with A, B, C, or D. · .cdrAction: Populate the .cdr PAL Fee Indicator field with A, B, C, or D.Error location: .cdr6047The .cdr PAL Fee Amount field must be populated with a numeric value.Populate the .cdr PAL Fee Amount field with a numeric value. · .cdrAction: Populate the .cdr PAL Fee Amount field with a numeric value.Error location: .cdr6048Referential Integrity Error: There cannot be duplicate primary keys in the .cdr file (Job ID, Certificate Of Mailing Header ID, and COM Piece ID).Populate the .cdr Job ID, Certificate Of Mailing Header ID, and COM Piece ID fields with unique values in the .cdr file. · .cdrAction: Populate the .cdr Job ID, Certificate Of Mailing Header ID, and COM Piece ID fields with unique values in the .cdr file.Error location: .cdr6049The .cdr Job ID field does not match the .hdr Job ID field.Populate the .cdr Job ID field with the same value that is populated in the .hdr Job ID field. · .cdrAction: Populate the .cdr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: .cdr6050The .cdr Certificate Of Mailing Header ID field does not match the .chr Certificate of Mailing Header ID field.Populate the .cdr Certificate Of Mailing Header ID field with the same value that is populated in the .hdr Certificate of Mailing Header ID field. · .cdrAction: Populate the .cdr Certificate Of Mailing Header ID field with the same value that is populated in the .hdr Certificate of Mailing Header ID field.Error location: .cdr6051The .cdr CDR Record Status field does not match the .hdr Certificate of Mailing Detail Status field.Populate the .cdr CDR Record Status field with the same value that is populated in the .hdr Certificate of Mailing Detail Status field. · .cdrAction: Populate the .cdr CDR Record Status field with the same value that is populated in the .hdr Certificate of Mailing Detail Status field.Error location: .cdr6052The .hdr Certificate of Mailing Detail Record Count field must match the Record Count of the Certificate of Mailing Detail Record File.Populate the Certificate of Mailing Detail Record Count field with a value that is equal to the Record Count of the Certificate of Mailing Detail Record File. · .cdrAction: Populate the Certificate of Mailing Detail Record Count field with a value that is equal to the Record Count of the Certificate of Mailing Detail Record File.Error location: .cdr6053The .cdr Postage field must be populated with a numeric value.Populate the .cdr Postage field with a numeric value. · .cdrAction: Populate the .cdr Postage field with a numeric value.Error location: .cdr6054The .cdr Recipient Name field must be populated with an alphanumeric value.Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed. · .cdrAction: Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed.Error location: .cdr6055The .cdr Primary Address field must be populated with an alphanumeric value.Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed. · .cdrAction: Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed.Error location: .cdr6056The .cdr Secondary Address field must be populated with an alphanumeric value.Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed. · .cdrAction: Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed.Error location: .cdr6057The .cdr City field must be populated with an alphanumeric value.Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed. · .cdrAction: Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed.Error location: .cdr6058Required Field Missing: Job ID is a required field in the .cfr file.Populate the .cfr Job ID field. · .cfrAction: Populate the .cfr Job ID field.Error location: .cfr6059Required Field Missing: Certificate Of Mailing Header ID is a required field in the .cfr file.Populate the .cfr Certificate Of Mailing Header ID field. · .cfrAction: Populate the .cfr Certificate Of Mailing Header ID field.Error location: .cfr6060Required Field Missing: Piece ID is a required field in the .cfr file.Populate the .cfr Piece ID field. · .cfrAction: Populate the .cfr Piece ID field.Error location: .cfr6061Required Field Missing: Service Type is a required field in the .cfr file.Populate the .cfr Service Type field. · .cfrAction: Populate the .cfr Service Type field.Error location: .cfr6062Required Field Missing: Special Fees/Charges Services ID is a required field in the .cfr file.Populate the .cfr Special Fees/Charges Services ID field. · .cfrAction: Populate the .cfr Special Fees/Charges Services ID field.Error location: .cfr6063Required Field Missing: CFR Record Status is a required field in the .cfr file.Populate the .cfr CFR Record Status field. · .cfrAction: Populate the .cfr CFR Record Status field.Error location: .cfr6064Required Field Missing: Closing Character is a required field in the .cfr file.Populate the .cfr Closing Character field. · .cfrAction: Populate the .cfr Closing Character field.Error location: .cfr6065For .cfr File Processing, the .cfr Closing Character field contains an invalid value; it must contain #.Populate the .cfr Closing Character field with #. · .cfrAction: Populate the .cfr Closing Character field with #.Error location: .cfr6066There can be no characters after the .cfr Closing Character.Remove all characters after the .cfr Closing Character. · .cfrAction: Remove all characters after the .cfr Closing Character.Error location: .cfr6068The .cfr Special Fees/Charges Services ID field must be populated with an alphanumeric value.Populate the .cfr Special Fees/Charges Services ID field with an alphanumeric value. · .cfrAction: Populate the .cfr Special Fees/Charges Services ID field with an alphanumeric value.Error location: .cfr6069The .cfr Service Stated Value field must be populated with a numeric value.Populate the .cfr Service Stated Value field with a numeric value. · .cfrAction: Populate the .cfr Service Stated Value field with a numeric value.Error location: .cfr6070The .cfr Service Fee field must be populated with a numeric value.Populate the .cfr Service Fee field with a numeric value. · .cfrAction: Populate the .cfr Service Fee field with a numeric value.Error location: .cfr6071The .cfr Amount Due field must be populated with a numeric value.Populate the .cfr Amount Due field with a numeric value. · .cfrAction: Populate the .cfr Amount Due field with a numeric value.Error location: .cfr6072The .cfr CFR Record Status field does not match the .hdr Certificate of Mailing Services Status field.Populate the .cfr CFR Record Status field with the same value that is populated in the .hdr Certificate of Mailing Services Status field. · .cfrAction: Populate the .cfr CFR Record Status field with the same value that is populated in the .hdr Certificate of Mailing Services Status field.Error location: .cfr6073The .hdr Certificate of Mailing Services Record Count field must match the Record Count of the Certificate of Mailing Services File.Populate the Certificate of Mailing Services Record Count field with a value that is equal to the Record Count of the Certificate of Mailing Services File. · .cfrAction: Populate the Certificate of Mailing Services Record Count field with a value that is equal to the Record Count of the Certificate of Mailing Services File.Error location: .cfr6074The .cfr Job ID field does not match the .hdr Job ID field.Populate the .cfr Job ID field with the same value that is populated in the .hdr Job ID field. · .cfrAction: Populate the .cfr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: .cfr6075The .cfr Service Additional Type provided was {1}. The .cfr Service Additional Type must be populated with A, C, D, F, G, or H when populated.Populate the .cfr Service Additional Type with A, C, D, F, G, or H when populated. · .cfrAction: Populate the .cfr Service Additional Type with A, C, D, F, G, or H when populated.Error location: .cfr6076The .cfr Certificate Of Mailing Header ID field does not match the .chr Certificate of Mailing Header ID field.Populate the .cfr Certificate Of Mailing Header ID field with the same value that is populated in the .hdr Certificate of Mailing Header ID field. · .cfrAction: Populate the .cfr Certificate Of Mailing Header ID field with the same value that is populated in the .hdr Certificate of Mailing Header ID field.Error location: .cfr6077The value provided for the .cfr CFR Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert or U = Update.Populate the .cfr CFR Record Status field. · .cbrAction: Populate the .cfr CFR Record Status field.Error location: .cbr6078Referential Integrity Error: There cannot be duplicate primary keys in the .cfr file (Job ID, Certificate Of Mailing Header ID, COM Piece ID, and Service Type).Populate the .cfr Job ID, Certificate Of Mailing Header ID, COM Piece ID, and Service Type fields with unique values in the .cfr file. · .cfrAction: Populate the .cfr Job ID, Certificate Of Mailing Header ID, COM Piece ID, and Service Type fields with unique values in the .cfr file.Error location: .cfr6079The .rms Campaign Mail Owner CRID must be populated with a valid value in the PostalOne! system.Populate the .rms Campaign Mail Owner CRID with a valid value. · .rmsAction: Populate the .rms Campaign Mail Owner CRID with a valid value.Error location: .rms6080When provided, the .rms Campaign Mail Preparer CRID must be populated with a valid value in the PostalOne! system.Populate the .rms Campaign Mail Preparer CRID with a valid value. · .rmsAction: Populate the .rms Campaign Mail Preparer CRID with a valid value.Error location: .rms6082Required Field Missing: Job ID is a required field in the .chr file.Populate the .chr Job ID field. · .chrAction: Populate the .chr Job ID field.Error location: .chr6083Required Field Missing: Certificate of Mailing Header ID is a required field in the .chr file.Populate the .chr Certificate of Mailing Header ID field. · .chrAction: Populate the .chr Certificate of Mailing Header ID field.Error location: .chr6084Required Field Missing: Form Type is a required field in the .chr file.Populate the .chr Form Type field. · .chrAction: Populate the .chr Form Type field.Error location: .chr6085Required Field Missing: Sender Tracking ID is a required field in the .chr file.Populate the .chr Sender Tracking ID field. · .chrAction: Populate the .chr Sender Tracking ID field.Error location: .chr6086Required Field Missing: MPA ID is a required field in the .chr file.Populate the .chr MPA ID field. · .chrAction: Populate the .chr MPA ID field.Error location: .chr6087Required Field Missing: CHR Record Status is a required field in the .chr file.Populate the .chr CHR Record Status field. · .chrAction: Populate the .chr CHR Record Status field.Error location: .chr6088Required Field Missing: Closing Character is a required field in the .chr file.Populate the .chr Closing Character field. · .chrAction: Populate the .chr Closing Character field.Error location: .chr6089For .chr File Processing, the .chr Closing Character field contains an invalid value; it must contain #.Remove all characters after the .chr Closing Character. · .chrAction: Remove all characters after the .chr Closing Character.Error location: .chr6090There can be no characters after the .chr Closing Character.Remove all characters after the .chr Closing Character. · .chrAction: Remove all characters after the .chr Closing Character.Error location: .chr6091The value provided for the .chr CHR Record Status field was {1}; it must contain O = Original, D = Delete, I = Insert or U = Update.Populate the .chr CHR Record Status field. · .chrAction: Populate the .chr CHR Record Status field.Error location: .chr6092The value provided for the .chr Form Type field was {1}; it must contain A = PS Form 3606-D (Bulk Certificate of Mailing), B = PS Form 3665 (Certificate of Mailing), C = PS Form 3877 (Firm Book for Accountable Mail).Populate the .chr Form Type field with A, B, or C. · .chrAction: Populate the .chr Form Type field with A, B, or C.Error location: .chr6093The .chr Mail Owner Postal Code must be populated with exactly five or nine numeric characters.Populate the .chr Mail Owner Postal Code field with 5 or 9 numeric characters. · .chrAction: Populate the .chr Mail Owner Postal Code field with 5 or 9 numeric characters.Error location: .chr6094For .chr File Processing, the .chr Presort Mailing User License Code cannot contain any spaces and it must begin with an alphabetic character.Populate the .chr Presort Mailing User License Code field with a value that does not include spaces and that begins with an alphabetic character. · .chrAction: Populate the .chr Presort Mailing User License Code field with a value that does not include spaces and that begins with an alphabetic character.Error location: .chr6095The .chr Mailing Date must be populated with a valid numeric value formatted as YYYYMMDD (when populated).Populate the .chr Mailing Date field with a valid numeric value formatted as YYYYMMDD when populated. · .chrAction: Populate the .chr Mailing Date field with a valid numeric value formatted as YYYYMMDD when populated.Error location: .chr6096The value provided for the .chr Certificate Status field was {1}; it must contain Blank = Preliminary, R = Ready To Pay, or C = Cancel.Populate the .chr Certificate Status field with Blank, R, or C. · .chrAction: Populate the .chr Certificate Status field with Blank, R, or C.Error location: .chr6097The .chr Mail Owner Contact Name field must be populated with an alphanumeric value.Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed. · .chrAction: Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed.Error location: .chr6098The .chr Mail Owner Company Name field must be populated with an alphanumeric value.Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed. · .chrAction: Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed.Error location: .chr6099The .chr Mail Owner Primary Address field must be populated with an alphanumeric value.Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed. · .chrAction: Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed.Error location: .chr6100The .chr Mail Owner Secondary Address field must be populated with an alphanumeric value.Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed. · .chrAction: Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed.Error location: .chr6101The .chr Mail Owner City field must be populated with an alphanumeric value.Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed. · .chrAction: Remove all non-printable characters, extended ASCII codes and other characters which do not appear in Table 5-1 ASCII Symbols Allowed.Error location: .chr6102Referential Integrity Error: There cannot be duplicate primary keys in the .chr file (Job ID and Certificate of Mailing Header ID).Populate the .chr Job ID and Certificate of Mailing Header ID fields with unique values in the .chr file. · .chrAction: Populate the .chr Job ID and Certificate of Mailing Header ID fields with unique values in the .chr file.Error location: .chr6103The .chr Job ID field does not match the .hdr Job ID field.Populate the .chr Job ID field with the same value that is populated in the .hdr Job ID field. · .chrAction: Populate the .chr Job ID field with the same value that is populated in the .hdr Job ID field.Error location: .chr6104The .chr CHR Record Status field does not match the .hdr Certificate of Mailing Header Status field.Populate the .chr CHR Record Status field with the same value that is populated in the .hdr Certificate of Mailing Header Status field. · .chrAction: Populate the .chr CHR Record Status field with the same value that is populated in the .hdr Certificate of Mailing Header Status field.Error location: .chr6105The .hdr Certificate of Mailing Header Record Count field must match the Record Count of the Certificate of Mailing Header Record File.Populate the Certificate of Mailing Header Record Count field with a value that is equal to the Record Count of the Certificate of Mailing Header Record File. · .chrAction: Populate the Certificate of Mailing Header Record Count field with a value that is equal to the Record Count of the Certificate of Mailing Header Record File.Error location: .chr6107Campaign Sharing Indicator is a required field in the .rms file.Populate the .rms Campaign Sharing Indicator field. · .rmsAction: Populate the .rms Campaign Sharing Indicator field.Error location: .rms6108Campaign Target URL Parameters Indicator is a required field in the .rms file.Populate the .rms Campaign Target URL Parameters Indicator field. · .rmsAction: Populate the .rms Campaign Target URL Parameters Indicator field.Error location: .rms6109Campaign Mail Owner CRID is a required field in the .rms file.Populate the .rms Campaign Mail Owner CRID field. · .rmsAction: Populate the .rms Campaign Mail Owner CRID field.Error location: .rms6110Campaign Processing Category is a required field in the .rms file.Populate the .rms Campaign Processing Category field. · .rmsAction: Populate the .rms Campaign Processing Category field.Error location: .rms6111The .rms Campaign Sharing Indicator field must be populated with Y or N.Populate the .rms Campaign Sharing Indicator field with Y or N. · .rmsAction: Populate the .rms Campaign Sharing Indicator field with Y or N.Error location: .rms6112The .rms Campaign Target URL Parameters Indicator field must be populated with Y or N.Populate the .rms Campaign Target URL Parameters Indicator field with Y or N. · .rmsAction: Populate the .rms Campaign Target URL Parameters Indicator field with Y or N.Error location: .rms6113When the .hdr Mail.dat Presentation Category is populated with R = Certificate of Mailing, only the .hdr, .mpa, and .chr files must be provided. Additional optional files .cbr, cdr, and .cfr may be included.Provide only the .hdr, .mpa, .chr, .cbr, .cdr, and .cfr files. · .hdrAction: Provide only the .hdr, .mpa, .chr, .cbr, .cdr, and .cfr files.Error location: .hdr6114Referential Integrity Error: The .chr Form Type is A = PS Form 3606-D (Bulk Certificate Of Mailing) and the .chr Certificate of Mailing Header ID does not have a corresponding .cbr Certificate of Mailing Header ID.Populate the .cbr Certificate of Mailing Header ID field with a value that matches the .chr Certificate of Mailing Header ID field when the .chr Form Type is populated with A. · .chrAction: Populate the .cbr Certificate of Mailing Header ID field with a value that matches the .chr Certificate of Mailing Header ID field when the .chr Form Type is populated with A.Error location: .chr6115Referential Integrity Error: The .chr Form Type is B = PS Form 3665 (Certificate Of Mailing) or C = PS Form 3877 (Firm Book for Accountable Mail) and the .chr Certificate of Mailing Header ID does not have a corresponding .cdr Certificate of Mailing Header ID.Populate the .cdr Certificate of Mailing Header ID field with a value that matches the .chr Certificate of Mailing Header ID field when the .chr Form Type is populated with B or C. · .chrAction: Populate the .cdr Certificate of Mailing Header ID field with a value that matches the .chr Certificate of Mailing Header ID field when the .chr Form Type is populated with B or C.Error location: .chr6116Referential Integrity Error: The .chr Form Type is C = PS Form 3877 (Firm Book for Accountable Mail) and the .chr Certificate of Mailing Header ID does not have a corresponding .cfr Certificate of Mailing Header ID.Populate the .cfr Certificate of Mailing Header ID field with a value that matches the .chr Certificate of Mailing Header ID field when the .chr Form Type is populated with C. · .chrAction: Populate the .cfr Certificate of Mailing Header ID field with a value that matches the .chr Certificate of Mailing Header ID field when the .chr Form Type is populated with C.Error location: .chr6117Duplicate Record Found: The .chr Sender Tracking ID {1} is not unique within the .chr file.Update the .chr Sender Tracking ID to be unique within the .chr file. · .chrAction: Update the .chr Sender Tracking ID to be unique within the .chr file.Error location: .chr6118When The .chr form Type is B = PS Form 3665 (Certificate Of Mailing) or C = PS Form 3877 (Firm Book for Accountable Mail) the .chr Mail Owner Province or State - International or the .chr Mail Owner State field must be populated, but not both.Populate one but not both of the .chr Mail Owner State and the .chr Mail Owner Province or State - International fields. · .chrAction: Populate one but not both of the .chr Mail Owner State and the .chr Mail Owner Province or State - International fields.Error location: .chr6119Duplicate Record Found: The .cbr Certificate of Mailing Header ID {1} is not unique within the .cbr file.Update the .cbr Certificate of Mailing Header ID to be unique within the .cbr file. · .cbrAction: Update the .cbr Certificate of Mailing Header ID to be unique within the .cbr file.Error location: .cbr6120The .chr Certificate Status must be populated with R = Ready to Pay.Populate the .chr Certificate Status with R. · .chrAction: Populate the .chr Certificate Status with R.Error location: .chr6121The .chr Record Status must be populated with O = Original.Populate the .chr Record Status with O. · .chrAction: Populate the .chr Record Status with O.Error location: .chr6122The .cbr Record Status must be populated with O = Original.Populate the .cbr Record Status with O. · .cbrAction: Populate the .cbr Record Status with O.Error location: .cbr6123The .cdr Record Status must be populated with O = Original.Populate the .cdr Record Status with O. · .cdrAction: Populate the .cdr Record Status with O.Error location: .cdr6124The .cfr Record Status must be populated with O = Original.Populate the .cfr Record Status with O. · .cfrAction: Populate the .cfr Record Status with O.Error location: .cfr6125The .cdr Province or State – International is not supported.Do not populate the .cdr Province or State – International. · .cdrAction: Do not populate the .cdr Province or State – International.Error location: .cdr6126The .cdr Country Code is not supported.Do not populate the .cdr Country Code. · .cdrAction: Do not populate the .cdr Country Code.Error location: .cdr6127The .cdr PAL Fee Indicator field is required when the .cdr PAL Fee Amount field is populated.Populate the .cdr PAL Fee Indicator. · .cdrAction: Populate the .cdr PAL Fee Indicator.Error location: .cdr6128The .cdr PAL Fee Amount field is required when the .cdr PAL Fee Indicator field is populated.Populate the .cdr PAL Fee Amount. · .cdrAction: Populate the .cdr PAL Fee Amount.Error location: .cdr6129Referential Integrity Error: The combination of .cfr Certificate Of Mailing Header ID and .cfr COM Piece ID does not have a corresponding .cdr Certificate Of Mailing Header ID and .cdr COM Piece ID.Populate the .cfr COM Piece ID field with a value that matches the .cdr COM Piece ID. · .cfrAction: Populate the .cfr COM Piece ID field with a value that matches the .cdr COM Piece ID.Error location: .cfr6130The .hdr Certificate of Mailing Header Status field value provided was {1}; it must contain O = Original, N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Certificate of Mailing Header Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Certificate of Mailing Header Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr6131The .hdr Certificate of Mailing Header Status is a required field in the .hdr file.Populate the .hdr Certificate of Mailing Header Status field. · .hdrAction: Populate the .hdr Certificate of Mailing Header Status field.Error location: .hdr6132Required Field Missing: Certificate of Mailing Header Record Count is a required field in the .hdr file.Populate the .hdr Certificate of Mailing Header Record Count field. · .hdrAction: Populate the .hdr Certificate of Mailing Header Record Count field.Error location: .hdr6133Data Type Error: Certificate of Mailing Header Record Count must be a numeric value in the .hdr file.Populate the .hdr Certificate of Mailing Header Record Count field with a numeric value. · .hdrAction: Populate the .hdr Certificate of Mailing Header Record Count field with a numeric value.Error location: .hdr6134The .hdr Certificate of Mailing Detail Status field value provided was {1}; it must contain O = Original, N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Certificate of Mailing Detail Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Certificate of Mailing Detail Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr6135The .hdr Certificate of Mailing Detail Status is a required field in the .hdr file.Populate the .hdr Certificate of Mailing Detail Status field. · .hdrAction: Populate the .hdr Certificate of Mailing Detail Status field.Error location: .hdr6136Required Field Missing: Certificate of Mailing Detail Record Count is a required field in the .hdr file.Populate the .hdr Certificate of Mailing Detail Record Count field. · .hdrAction: Populate the .hdr Certificate of Mailing Detail Record Count field.Error location: .hdr6137Data Type Error: Certificate of Mailing Detail Record Count must be a numeric value in the .hdr file.Populate the .hdr Certificate of Mailing Detail Record Count field with a numeric value. · .hdrAction: Populate the .hdr Certificate of Mailing Detail Record Count field with a numeric value.Error location: .hdr6138The .hdr Certificate of Mailing Bulk Status field value provided was {1}; it must contain O = Original, N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Certificate of Mailing Bulk Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Certificate of Mailing Bulk Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr6139The .hdr Certificate of Mailing Bulk Status is a required field in the .hdr file.Populate the .hdr Certificate of Mailing Bulk Status field. · .hdrAction: Populate the .hdr Certificate of Mailing Bulk Status field.Error location: .hdr6140Required Field Missing: Certificate of Mailing Bulk Record Count is a required field in the .hdr file.Populate the .hdr Certificate of Mailing Bulk Record Count field. · .hdrAction: Populate the .hdr Certificate of Mailing Bulk Record Count field.Error location: .hdr6141Data Type Error: Certificate of Mailing Bulk Record Count must be a numeric value in the .hdr file.Populate the .hdr Certificate of Mailing Bulk Record Count field with a numeric value. · .hdrAction: Populate the .hdr Certificate of Mailing Bulk Record Count field with a numeric value.Error location: .hdr6142The .hdr Certificate of Mailing Services Status field value provided was {1}; it must contain O = Original, N = None Transmitted, D = Delete Entire File, C = Change Individual Records, or U = Update Individual Records.Populate the .hdr Certificate of Mailing Services Status field with O = Original, N = None, D = Delete, C = Change, U = Update. · .hdrAction: Populate the .hdr Certificate of Mailing Services Status field with O = Original, N = None, D = Delete, C = Change, U = Update.Error location: .hdr6143The .hdr Certificate of Mailing Services Status is a required field in the .hdr file.Populate the .hdr Certificate of Mailing Services Status field. · .hdrAction: Populate the .hdr Certificate of Mailing Services Status field.Error location: .hdr6144Required Field Missing: Certificate of Mailing Services Record Count is a required field in the .hdr file.Populate the .hdr Certificate of Mailing Services Record Count field. · .hdrAction: Populate the .hdr Certificate of Mailing Services Record Count field.Error location: .hdr6145Data Type Error: Certificate of Mailing Services Record Count must be a numeric value in the .hdr file.Populate the .hdr Certificate of Mailing Services Record Count field with a numeric value. · .hdrAction: Populate the .hdr Certificate of Mailing Services Record Count field with a numeric value.Error location: .hdr6146The .cfr Service Type claimed {1} is not supported.Update eDoc to claim a valid .cfr Service Type. · .cfrAction: Update eDoc to claim a valid .cfr Service Type.Error location: .cfr6147The .cfr Service Type E = Insured and H = Return Receipt (Electronic) cannot be claimed together on the same piece when the Insured .cfr Service Stated Value is greater than $500.Only claim the .cfr Service Type of E and H on the same piece when the Insured .cfr Service Stated value is less than $500. · .cfrAction: Only claim the .cfr Service Type of E and H on the same piece when the Insured .cfr Service Stated value is less than $500.Error location: .cfr6148The .cfr Service Type Z1 = Adult Signature 21 Required and Z2 = Adult Signature 21 Restricted cannot be claimed together on the same piece.Only claim .cfr Service Type Z1 or Z2 on an individual piece. · .cfrAction: Only claim .cfr Service Type Z1 or Z2 on an individual piece.Error location: .cfr6150When the .hdr Mail.dat Presentation Category is populated with R = Certificate of Mailing then the .mpa Permit Number must be tied to an active account on the PostalOne! and EPS systems.Populate the .mpa Permit Number field with a value that is active in PostalOne! and the EPS systems when populated. · .mpaAction: Populate the .mpa Permit Number field with a value that is active in PostalOne! and the EPS systems when populated.Error location: .mpa6151When The .chr form Type is B = PS Form 3665 (Certificate Of Mailing) or C = PS Form 3877 (Firm Book for Accountable Mail) and the .chr Mail Owner State is populated then the .chr Mail Owner Contact Name, .chr Mail Owner Primary Address, .chr Mail Owner City, and .chr Mail Owner Postal Code must be populated.Populate the .chr Mail Owner Contact Name, .chr Mail Owner Primary Address, .chr Mail Owner City, .chr Mail Owner State, and .chr Mail Owner Postal Code. · .chrAction: Populate the .chr Mail Owner Contact Name, .chr Mail Owner Primary Address, .chr Mail Owner City, .chr Mail Owner State, and .chr Mail Owner Postal Code.Error location: .chr6152For .hdr File Processing, the Mail.dat Presentation Category is populated with an invalid value; the .hdr Mail.dat Presentation Category must be populated with R = Certificate of Mailing when the .chr file is provided.Update the .hdr Presentation Category to R = Certificate of Mailing. · .hdrAction: Update the .hdr Presentation Category to R = Certificate of Mailing.Error location: .hdr6153When The .chr form Type is B = PS Form 3665 (Certificate Of Mailing) or C = PS Form 3877 (Firm Book for Accountable Mail) and the .chr Mail Owner Province or State International is populated then the .chr Mail Owner Contact Name, .chr Mail Owner Primary Address, .chr Mail Owner City, .chr Mail Owner Province or State International, .chr Mail Owner Postal Code, and .chr Mail Owner Country Code must be populated.Populate the .chr Mail Owner Contact Name, .chr Mail Owner Primary Address, .chr Mail Owner City, .chr Mail Owner Province or State International, .chr Mail Owner Postal Code, and .chr Mail Owner Country Code. · .chrAction: Populate the .chr Mail Owner Contact Name, .chr Mail Owner Primary Address, .chr Mail Owner City, .chr Mail Owner Province or State International, .chr Mail Owner Postal Code, and .chr Mail Owner Country Code.Error location: .chr6160Required Field Missing: Segment ID is a required field in the .wsr file.Populate the .wsr Segment ID field. · .wsrAction: Populate the .wsr Segment ID field.Error location: .wsr6161Required Field Missing: Package Zip Code is a required field in the .wsr file.Populate the .wsr Package Zip Code field. · .wsrAction: Populate the .wsr Package Zip Code field.Error location: .wsr6162Required Field Missing: Package CR Number is a required field in the .wsr file.Populate the .wsr Package CR Number field. · .wsrAction: Populate the .wsr Package CR Number field.Error location: .wsr6163Required Field Missing: Co-Palletization Code is a required field in the .wsr file.Populate the .wsr Co-Palletization Code field. · .wsrAction: Populate the .wsr Co-Palletization Code field.Error location: .wsr6164Required Field Missing: Walk Sequence Type is a required field in the .wsr file.Populate the .wsr Walk Sequence Type field. · .wsrAction: Populate the .wsr Walk Sequence Type field.Error location: .wsr6165Required Field Missing: Walk Sequence Stops is a required field in the .wsr file.Populate the .wsr Walk Sequence Stops field. · .wsrAction: Populate the .wsr Walk Sequence Stops field.Error location: .wsr6166Required Field Missing: Walk Sequence Denominator is a required field in the .wsr file.Populate the .wsr Walk Sequence Denominator field. · .wsrAction: Populate the .wsr Walk Sequence Denominator field.Error location: .wsr6167Required Field Missing: Walk Sequence Database Date is a required field in the .wsr file.Populate the .wsr Walk Sequence Database Date field. · .wsrAction: Populate the .wsr Walk Sequence Database Date field.Error location: .wsr6170When the .mpu Mail Piece Unit - Class is populated with 1 = First Class, the .hdr Mail.dat Presentation Category is N = Single Piece, the .mpu Mail Piece Unit - Processing Category is populated with PF = Parcel, First Class, LT = Letter, or FL = Flat, then the corresponding .cqt Zone must be populated with N = Not Zoned, 1 = Zone 1, 2 = Zone 2, 3 = Zone 3, 4 = Zone 4, 5 = Zone 5, 6 = Zone 6, 7 = Zone 7, 8 = Zone 8, or 9 = Zone 9.Populate .cqt Zone with N, 1, 2, 3, 4, 5, 6, 7, 8, or 9. · .cqtAction: Populate .cqt Zone with N, 1, 2, 3, 4, 5, 6, 7, 8, or 9.Error location: .cqt6176When the .mpu Mail Piece Unit - Class is 3 = Std Mail and .mpu Mail Piece Unit - Processing Category is LT = Letter, then a .csm Container Type L, O, T, E, or F with .csm Container Level G or N and .cqt Rate Category B, C, or E cannot be submitted on the same segment as another .csm Container Type L, O, T, E, or F with .csm Container Level A, B, C, or D and .cqt Rate Category B or C.Multiple filesError location: Multiple files6177The .rms Job ID field must be populated with an alphanumeric value.Populate the .rms Job ID field with an alphanumeric value. · .rmsAction: Populate the .rms Job ID field with an alphanumeric value.Error location: .rms6178The .rms RMS ID field must be populated with an alphanumeric value.Populate the .rms RMS ID field with an alphanumeric value. · .rmsAction: Populate the .rms RMS ID field with an alphanumeric value.Error location: .rms6179The .rms Campaign Code field must be populated with an alphanumeric value.Populate the .rms Campaign Code field with an alphanumeric value. · .rmsAction: Populate the .rms Campaign Code field with an alphanumeric value.Error location: .rms6180The .rms Campaign Processing Category field must be populated with an alphanumeric value.Populate the .rms Campaign Processing Category field with an alphanumeric value. · .rmsAction: Populate the .rms Campaign Processing Category field with an alphanumeric value.Error location: .rms6182The .sfr Service Type of A = Live Animal and Perishable Handling Fee must be claimed when the .sfr Service Type of PR = Perishables or DP = Day-Old Poultry (Live Animal) is claimed.Claim the .sfr Service Type field A = Live Animal and Perishable Handling Fee. · .sfrAction: Claim the .sfr Service Type field A = Live Animal and Perishable Handling Fee.Error location: .sfr6183The .sfr Service Type of PR = Perishables must be claimed when the .sfr Service Type of A = Live Animal and Perishable Handling Fee or DP = Day-Old Poultry (Live Animal) Is claimed.Claim the .sfr Service Type field PR = Perishables · .sfrAction: Claim the .sfr Service Type field PR = PerishablesError location: .sfr6184The .sfr Service Type of PR = Perishables and A = Live Animal and Perishable Handling Fee must be claimed when the .sfr Service Type of DP = Day-Old Poultry (Live Animal) is claimed.Claim the .sfr Service Type field PR = Perishables and A = Live Animal and Perishable Handling Fee · .sfrAction: Claim the .sfr Service Type field PR = Perishables and A = Live Animal and Perishable Handling FeeError location: .sfr6185Required Field Missing: Verification Facility ZIP Code is a required field in the .CHR file. Error Action: Populate the .chr Verification Facility ZIP Code field.Populate the .chr Verification Facility ZIP Code field. · .chrAction: Populate the .chr Verification Facility ZIP Code field.Error location: .chr6186Certificate of Mailing files are no longer supported for Mail.dat version 24-1 and earlier.Update to the latest Mail.dat version.Action: Update to the latest Mail.dat version.6187Numeric Data Type Error: The .ccr Pre-Denominated Maximum Credit Amount field must be populated with a numeric value.Populate the .ccr Pre-Denominated Maximum Credit Amount field with a numeric value. · .ccrAction: Populate the .ccr Pre-Denominated Maximum Credit Amount field with a numeric value.Error location: .ccr6190When the .chr Form Type is populated with B = PS Form 3665 (Certificate Of Mailing) then the number of certificate of mailing detail records must be 3 or greater.Verify the number of .cdr records is 3 or greater for the corresponding .cdr Certificate of Mailing Header ID. · .cdrAction: Verify the number of .cdr records is 3 or greater for the corresponding .cdr Certificate of Mailing Header ID.Error location: .cdr6191When the .seg Detached Mailing Label Indicator field is populated with C = Plus One with Flats, then all .seg Detached Mailing Label Indicator fields must be populated with C.Populate .seg Detached Mailing Label Indicator field with C = Plus One with Flats. · .segAction: Populate .seg Detached Mailing Label Indicator field with C = Plus One with Flats.Error location: .seg6192The value provided for .cqt Rate Category field was {1}; it must contain only PO = Plus One when the .seg Detached Mailing Label Indicator field is populated with C = Plus One with Flats.Populate the .cqt Rate Category field with PO when the .seg Detached Mailing Label Indicator field is populated with C. · .cqtAction: Populate the .cqt Rate Category field with PO when the .seg Detached Mailing Label Indicator field is populated with C.Error location: .cqt6193The value provided for .cqt Destination Entry field was {1}; it must contain only S when the .seg Detached Mailing Label Indicator field is populated with C = Plus One with Flats.Populate the .cqt Destination Entry with PO when the .seg Detached Mailing Label Indicator field is populated with C. · .cqtAction: Populate the .cqt Destination Entry with PO when the .seg Detached Mailing Label Indicator field is populated with C.Error location: .cqt6194The .seg Plus One Host Job ID field and .seg Plus One Host User License Code field are required when the .seg Detached Mailing Label Indicator field is populated with C = Plus One with Flats.Populate the .seg Plus One Host Job ID field and .seg Plus One Host User License Code field when the .seg Detached Mailing Label Indicator field is populated with C. · .segAction: Populate the .seg Plus One Host Job ID field and .seg Plus One Host User License Code field when the .seg Detached Mailing Label Indicator field is populated with C.Error location: .seg6195The .seg Plus One Host User License Code cannot contain any spaces and it must begin with an alphabetic character.Populate the .seg Plus One Host User License Code field with a value that does not include spaces and that begins with an alphabetic character. · .segAction: Populate the .seg Plus One Host User License Code field with a value that does not include spaces and that begins with an alphabetic character.Error location: .seg6196The .seg Plus One Host Job ID field must be populated with an alphanumeric value.Populate the .seg Plus One Host Job ID field with an alphanumeric value. · .segAction: Populate the .seg Plus One Host Job ID field with an alphanumeric value.Error location: .seg6197When the .cqt Rate Category field is populated with PO = Plus One, then a .pdr or a .pbc file must be provided with the .pdr IM Barcode or .pbc Barcode field populated with a 20, 25, 29, or 31 character value.Populate the .pdr IM Barcode field or the .pbc Barcode field with a 20, 25, 29, or 31 character value. · Multiple filesAction: Populate the .pdr IM Barcode field or the .pbc Barcode field with a 20, 25, 29, or 31 character value.Error location: Multiple files6198When the .seg Plus One Host Job ID field and .seg Plus One Host User License Code field are populated, then all the .pdr IM Barcode fields or .pbc Barcode fields on the host job must be populated with a 20, 25, 29, or 31 character value.Populate the .pdr IM Barcode field or the .pbc Barcode field on the host job with a 20, 25, 29, or 31 character value · Multiple filesAction: Populate the .pdr IM Barcode field or the .pbc Barcode field on the host job with a 20, 25, 29, or 31 character valueError location: Multiple files6199The .seg Plus One Host Job ID and .seg Plus One Host User License Code is not associated with a finalized postage statement.Finalize all postage statements associated to the .seg Plus One Host Job ID and .seg Plus One Host User License Code · .segAction: Finalize all postage statements associated to the .seg Plus One Host Job ID and .seg Plus One Host User License CodeError location: .seg6200Required Field Missing: Non-Destination Entry Zone is a required field in the .cqt file.Populate the .cqt Non-Destination Entry Zone field. · .cqtAction: Populate the .cqt Non-Destination Entry Zone field.Error location: .cqt6201The .cqt Non-Destination Entry Zone field value provided was {1}; it must contain A = Zone A, B = Zone B, C = Zone C, D = Zone D, or N = Not Applicable.Populate the .cqt Non-Destination Entry Zone field with A, B, C, D, or N. · .cqtAction: Populate the .cqt Non-Destination Entry Zone field with A, B, C, D, or N.Error location: .cqt6202When the .seg Detached Mailing Label Indicator field is populated with C = Plus One with Flats, then the total .cqt Number of Pieces cannot exceed the total on the host mailing that claimed pieces with .mpu Processing Category FL = Flat, .cqt Destination Entry S = DSCF or D = DDU, and .cqt Rate Category A = Saturation - ECR or C = High Density Plus - ECR or B = High Density - ECR.Multiple filesError location: Multiple files6203When the .seg Detached Mailing Label Indicator field is populated with C = Plus One with Flats, then the total .cqt Number of Pieces on the host mailing that claimed pieces with .mpu Processing Category FL = Flat, .cqt Destination Entry S = DSCF or D = DDU, and .cqt Rate Category A = Saturation - ECR must meet or exceed 90% of the total that claimed .cqt Rate Category PO = Plus One. The current percentage is {2}.Multiple filesError location: Multiple files6204The combination of the .seg Plus One Host Job ID and .seg Plus One Host User License Code must be the same across all records within the .seg file.Populate the .seg Plus One Host Job ID and .seg Plus One Host User License Code with the same values across all records within the .seg file. · .segAction: Populate the .seg Plus One Host Job ID and .seg Plus One Host User License Code with the same values across all records within the .seg file.Error location: .seg6205The Plus One Host submission cannot be submitted for Mail.DAT version 25-1 and earlier.Update the Plus One Host to Mail.DAT version 26-1 or later.Action: Update the Plus One Host to Mail.DAT version 26-1 or later.