Mail.dat server errors
All 81 mail.dat server errors in the Mail.dat Technical Specification of October 5, 2026, each with what it means.Mail.dat Technical Specifications R65.0.0.0PDF page 421USPS original“PostalOne! Encountered an internal error during Mail.Dat file load. This will automatically be re-attempted.”
What it is
Each row gives a code, then these columns:Mail.dat Technical Specifications R65.0.0.0PDF page 421USPS original“PostalOne! Encountered an internal error during Mail.Dat file load. This will automatically be re-attempted.”
- message
- action
- error location
Every code
81 codes in the Mail.dat Server Error Messages, Mail.dat Technical Specification, October 5, 2026.
6000 SeriesPostalOne! Encountered an internal error during Mail.Dat file load. This will automatically be re-attempted.Job submission will be automatically re-attempted · File LoadAction: Job submission will be automatically re-attemptedError location: File Load6000 Series-2PostalOne! Encountered internal errors during Mail.Dat file load. Please contact PostalOne! Application support for assistance.Contact PostalOne! Application support. · File LoadAction: Contact PostalOne! Application support.Error location: File Load6000 Series-3PostalOne! Encountered an internal error during Mail.Dat validations. This will automatically be re-attempted.Job submission will be automatically re-attempted · Multiple FilesAction: Job submission will be automatically re-attemptedError location: Multiple Files6000 Series-4PostalOne! Encountered internal errors during Mail.Dat validations. Please contact PostalOne! Application support for assistance.Contact PostalOne! Application support. · Multiple FilesAction: Contact PostalOne! Application support.Error location: Multiple Files6000 Series-5PostalOne! Encountered an internal error during the Qualification Report generation process. This will automatically be re-attempted.Job submission will be automatically re-attempted · Qual ReportAction: Job submission will be automatically re-attemptedError location: Qual Report6000 Series-6PostalOne! Encountered internal errors during the Qualification Report generation process. Please contact PostalOne! Application support for assistance.Contact PostalOne! Application support. · Qual ReportAction: Contact PostalOne! Application support.Error location: Qual Report6000 Series-7PostalOne! Encountered an internal error during the Postage Statement Generation process. This will automatically be re-attempted.Job submission will be automatically re-attempted · Postage StatementAction: Job submission will be automatically re-attemptedError location: Postage Statement6000 Series-8PostalOne! Encountered internal errors during the Postage Statement Generation process. Please contact PostalOne! Application support for assistance.Contact PostalOne! Application support. · Postage StatementAction: Contact PostalOne! Application support.Error location: Postage Statement7000The Sum of CQT pieces/copies do not match the pieces/copies of the associated CSM record.Verify that the .csm Number of Copies and Pieces is equal to the sum of the .cqt Number of Copies and Pieces. · Multiple FilesAction: Verify that the .csm Number of Copies and Pieces is equal to the sum of the .cqt Number of Copies and Pieces.Error location: Multiple Files7001The CQT number of pieces does not match the CQT number of copies.Populate the .cqt Number of Pieces with the same value that is populated in the .cqt Number of Copies field. · .cqtAction: Populate the .cqt Number of Pieces with the same value that is populated in the .cqt Number of Copies field.Error location: .cqt7002The PQT number of pieces does not match the PQT number of copies.Populate the .pqt Number of Pieces with the same value that is populated in the .pqt Number of Copies field. · .pqtAction: Populate the .pqt Number of Pieces with the same value that is populated in the .pqt Number of Copies field.Error location: .pqt7003The parent CSM number of pieces does not match the sum of all child CSM pieces.Populate the .csm Number of Pieces field for the parent container with a value that is equal to the sum of all child .csm Number of Pieces. · .csmAction: Populate the .csm Number of Pieces field for the parent container with a value that is equal to the sum of all child .csm Number of Pieces.Error location: .csm7004The parent CSM weight does not match the sum of all child CSM weights.Populate the .csm Total Weight field for the parent container with a value that is equal to the sum of all .csm child weights. · .csmAction: Populate the .csm Total Weight field for the parent container with a value that is equal to the sum of all .csm child weights.Error location: .csm7006For each .cqt and .pdr CQT Database ID, the number of .pdr records whose .pdr “Wasted or Shortage Piece” Indicator is set to “W” = Wasted piece produced but was spoiled; “S” = Shortage – piece NOT produced; or blank = for all else must equal the .cqt Number of Pieces, the .cqt Number of Copies, or a value in between the .cqt Number of Pieces and .cqt Number of Copies. The value provided was {1}.Verify that the .pdr records whose .pdr “Wasted or Shortage Piece” Indicator is set to W, S, or blank are equal to the .cqt Number of Pieces, the .cqt Number of Copies, or a value in between the .cqt Number of Pieces and .cqt Number of Copies. · Multiple FilesAction: Verify that the .pdr records whose .pdr “Wasted or Shortage Piece” Indicator is set to W, S, or blank are equal to the .cqt Number of Pieces, the .cqt Number of Copies, or a value in between the .cqt Number of Pieces and .cqt Number of Copies.Error location: Multiple Files7007A valid Finance number could not be found for the .mpa Permit Zip+4.The value provided was {1}.Populate the .mpa Permit ZIP+4 field with a value that maps back to a valid Finance Number. · Qual ReportAction: Populate the .mpa Permit ZIP+4 field with a value that maps back to a valid Finance Number.Error location: Qual Report7011A Qualification Report was not generated.Verify that all fields are populated correctly to create a Qualification Report. · Qual ReportAction: Verify that all fields are populated correctly to create a Qualification Report.Error location: Qual Report7012A Shortage/Spoilage adjustment was attempted on an already finalized postage statement. Adjustment could not be made.All shortage/spoilage adjustments must be made prior to postage statement finalization. · Postage StatementAction: All shortage/spoilage adjustments must be made prior to postage statement finalization.Error location: Postage Statement7013The PDR Shortage/Spoilage adjustment could not be covered by the associated postage statement. Adjustment could not be made.Verify that the .pdr Wasted or Shortage Piece Indicator field is populated correct for Shortage/Spoilage adjustments. · Postage StatementAction: Verify that the .pdr Wasted or Shortage Piece Indicator field is populated correct for Shortage/Spoilage adjustments.Error location: Postage Statement7014The PAR Shortage/Spoilage adjustment could not be covered by any existing un-finalized postage statement. Adjustment could not be made.Verify that the fields in the .par file is populated correct for Shortage/Spoilage adjustments. · .parAction: Verify that the fields in the .par file is populated correct for Shortage/Spoilage adjustments.Error location: .par7017Parent container does not exist.Verify that the .csm Parent Container Reference ID field is populated with a valid value. · .csmAction: Verify that the .csm Parent Container Reference ID field is populated with a valid value.Error location: .csm7026Invalid Rate Category/Destination Entry combination. The value provided was {1}.Populate the .cqt Rate Category and .cqt Destination Entry field with a valid combination. · Postage StatementAction: Populate the .cqt Rate Category and .cqt Destination Entry field with a valid combination.Error location: Postage Statement7027{1} statement failed to account for all {2}. Expected: {3}, mapped: {4}. For Postage Statement Seq. Id: {5}, no postage rate was found for this combination of inputs: Seg Id: {6}, Cpt Class: {7}, Ctr Status: {8}, Postg Grouping Id: {9}, Mailing Date: {10}, Customer Ref Id: {11}, Fed Agency Cost Code: {12}, Permit Number: {13}, Permit Zip: {14}, Postage Payment Method: {15}, Permit Type: {16}, Finance Number: {17}, Process Category: {18}, Rate Type: {19}, Mpu Class: {20}, Rate Schedule: {21}, Rate Cat: {22}, CQT Zone: {23}, Number of Pieces: {24}.Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly. · Postage StatementAction: Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly.Error location: Postage Statement7028{1} statement failed to account for all {2}. Expected: {3}, mapped: {4}. For Postage Statement Seq. Id: {5}, no postage rate was found for this combination of inputs: Seg Id: {6}, Cpt Class: {7}, Ctr Status: {8}, Postg Grouping Id: {9}, Mailing Date: {10}, Customer Ref Id: {11}, Fed Agency Cost Code: {12}, Permit Number: {13}, Permit Zip: {14}, Postage Payment Method: {15}, Permit Type: {16}, Finance Number: {17}, Process Category: {18}, Rate Type: {19}, Mpu Class: {20}, Rate Schedule: {21}, Rate Cat: {22}, CQT Zone: {23}, Simplified Address Indicator: {24}, Number of Pieces: {25}.Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly. · Postage StatementAction: Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly.Error location: Postage Statement7029{1} statement failed to account for all {2}. Expected: {3}, mapped: {4}. For Postage Statement Seq. Id: {5}, no postage rate was found for this combination of inputs: Seg Id: {6}, Cpt Class: {7}, Ctr Status: {8}, Postg Grouping Id: {9}, Mailing Date: {10}, Customer Ref Id: {11}, Fed Agency Cost Code: {12}, Permit Number: {13}, Permit Zip: {14}, Postage Payment Method: {15}, Permit Type: {16}, Finance Number: {17}, Process Category: {18}, Rate Type: {19}, Mpu Class: {20}, Rate Schedule: {21}, Rate Cat: {22}, CQT Zone: {23}, Number of Pieces: {24}.Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly. · Postage StatementAction: Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly.Error location: Postage Statement7030A Periodical or Pending Periodical statement failed to account for all pieces. Expected: {1}, mapped: {2}. For Postage Statement Seq. Id: {3}, no postage rate was found for this combination of inputs: Seg Id: {4}, Cpt Class: {5}, Ctr Status: {6}, Postg Grouping Id: {7}, Mailing Date: {8}, Customer Ref Id: {9}, Fed Agency Cost Code: {10}, Permit Number: {11}, Permit Zip: {12}, Postage Payment Method: {13}, Process Category: {14}, Rate Type: {15}, Mpu Class: {16}, Rate Cat: {17}, CQT Zone: {18}, Number of Pieces: {19}.Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly. · Postage StatementAction: Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly.Error location: Postage Statement7031Invalid Rate Category/In-County Out-County Indicator for Periodical Postage Statements. Invalid Postage Statement value – {1}.Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly. · Postage StatementAction: Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly.Error location: Postage Statement7032Invalid Rate Category used for a Non-Incidental Enclosure Postage Statement. Invalid Rate Category – {1}.Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly. · Postage StatementAction: Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly.Error location: Postage Statement7033A Mail Owner and Mail Preparer were not provided and the submitting user does not have a linked Permit within the Post Office of Mailing from the .mpa Permit ZIP+4Populate the preparer permit with a valid value that is linked to the user. · Qual ReportAction: Populate the preparer permit with a valid value that is linked to the user.Error location: Qual Report7034All permits in a single version must map to a finance number.Populate all permits in a single version with values that map to the same finance number. · Qual ReportAction: Populate all permits in a single version with values that map to the same finance number.Error location: Qual Report7042The duplicate tray barcode percentage is more than the threshold for {1}, actual: {2}, threshold: {3}.Verify that the job does not include duplicate barcodes. · .csmAction: Verify that the job does not include duplicate barcodes.Error location: .csm7046Total Weight of Host CPT exceeds 20 ounces – {1}.Populate the .cpt Component – Weight field with a value that is less than or equal to 20 oz. · .cptAction: Populate the .cpt Component – Weight field with a value that is less than or equal to 20 oz.Error location: .cpt7053The .seg Container and Bundle Charge Method 1 is not fully supported and requires manual entry of a container and bundle statement for the third party payer.A postage statement must be entered manually. · .segAction: A postage statement must be entered manually.Error location: .seg7054The .cqt Service Level Indicator must be F when the .seg Full Service Participation Indicator is F = full-service option.Populate the .cqt Service Level Indicator field with F when the .seg Full-Service Participation Indicator field is F. · Multiple filesAction: Populate the .cqt Service Level Indicator field with F when the .seg Full-Service Participation Indicator field is F.Error location: Multiple files7055The .cqt Service Level Indicator must be F=full-service option for at least one .cqt record when the .seg Full Service Participation Indicator is M=Mixed-service (basic and full mixed).Populate the .cqt Service Level Indicator field with F for at least one .cqt record when the .seg Full-Service Participation Indicator is populated with M. · Multiple filesAction: Populate the .cqt Service Level Indicator field with F for at least one .cqt record when the .seg Full-Service Participation Indicator is populated with M.Error location: Multiple files7056The .cqt Service Level Indicator must be populated with B = Basic or O for other such as non-auto when the .seg Full-Service Participation Indicator field is blank.Populate the .seg Service Level Indicator field with O or B when the .seg Full-Service Participation Indicator field is blank. · Multiple filesAction: Populate the .seg Service Level Indicator field with O or B when the .seg Full-Service Participation Indicator field is blank.Error location: Multiple files7057The postage statement for this job has been frozen. Once a postage statement is frozen, containers within that postage statement cannot be canceled. {1}.Do not attempt to cancel containers that are associated to a frozen postage statement. · Multiple filesAction: Do not attempt to cancel containers that are associated to a frozen postage statement.Error location: Multiple files7058Cannot update records whose Record Status is set to O= Original. {1}.Populate the Record Status field with U for update job submissions. · .hdrAction: Populate the Record Status field with U for update job submissions.Error location: .hdr7059The .csm Label: IM Container or IM Tray Barcode must be unique below the configurable threshold when the .csm Container Status is R = Ready to pay or T = Transportation Information Update, if after R = Ready to pay or X = Previously Closed or Paid, and the .cqt Service Level Indicator is F = full-service option for the specified .csm Container ID.Populate the .csm Label: IM Container or IM Tray Barcode field with a value that is unique below the configurable threshold when the .csm Container Status is R or T and the .cqt Service Level Indicator is F for the specified .csm Container ID. · Multiple FilesAction: Populate the .csm Label: IM Container or IM Tray Barcode field with a value that is unique below the configurable threshold when the .csm Container Status is R or T and the .cqt Service Level Indicator is F for the specified .csm Container ID.Error location: Multiple Files7060The .pdr IM Barcode must be unique below the configurable threshold ({1}%) when the .csm Container Status is R = Ready to pay, the .cqt Service Level Indicator field is F = Full service option for the specified .csm Container ID, and the mailing is not setup as a Simple Mailing. The percentage duplicate was {2}.Populate the .pdr IM Barcode field with a value that is unique below the configurable threshold when the .csm Container Status is R, the .cqt Service Level Indicator field is F for the specified .csm Container ID, and the mailing is not setup as a Simple Mailing. · Multiple FilesAction: Populate the .pdr IM Barcode field with a value that is unique below the configurable threshold when the .csm Container Status is R, the .cqt Service Level Indicator field is F for the specified .csm Container ID, and the mailing is not setup as a Simple Mailing.Error location: Multiple Files7061The .pbc Barcode must be unique below the configurable threshold ({1}%) when the .csm Container Status is R= Ready to pay, the .cqt Service Level Indicator field is F=Full service option for the specified .csm Container ID, and the mailing is not setup as a Simple Mailing. The value provided was {2}.Populate the .pbc Barcode field with a value that is unique below the configurable threshold when the .csm Container Status is R, the .cqt Service Level Indicator field is F for the specified .csm Container ID, and the mailing is not setup as a Simple Mailing. · .pbcAction: Populate the .pbc Barcode field with a value that is unique below the configurable threshold when the .csm Container Status is R, the .cqt Service Level Indicator field is F for the specified .csm Container ID, and the mailing is not setup as a Simple Mailing.Error location: .pbc7063The PBC Shortage/Spoilage adjustment is greater than the postage on the associated postage statement. Adjustment could not be made. {1}.Adjust the amount of the .pbc Shortage/Spoilage amount to a value that is less than the postage on the associated postage statement. · .pbcAction: Adjust the amount of the .pbc Shortage/Spoilage amount to a value that is less than the postage on the associated postage statement.Error location: .pbc7068Submission date must be within 30 days of the Postage Statement Mailing Date. The System will only support Transportation Update with Container Status T = Transportation Information Update, if after R = Ready To Pay or X = Previously Closed or Paid. The value provided was {1}.Submit the job within 30 days of the .csm Postage Statement Mailing Date field value. · .csmAction: Submit the job within 30 days of the .csm Postage Statement Mailing Date field value.Error location: .csm7078The total postage on the lines for a postage statement does not match the total on the statement’s header.Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly. · Postage StatementAction: Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly.Error location: Postage Statement7079There were duplicate postage statement lines (Section: ‘%’, Line Number: ‘%’) generated for a postage statement with Mail Class (‘%’).Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly. · Postage StatementAction: Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly.Error location: Postage Statement7081A Pending Periodical statement failed to account for all pieces on the standard postage or bound printed matter lines. Expected: {1}, mapped: {2}. For Postage Statement Seq. Id: {3}, no postage rate was found for this combination of inputs: Seg Id: {4}, Cpt Class: {5}, Ctr Status: {6}, Postg Grouping Id: {7}, Mailing Date: {8}, Customer Ref Id: {9}, Fed Agency Cost Code: {10}, Permit Number: {11}, Permit Zip: {12}, Postage Payment Method: {13}, Permit Type: {14}, Finance Number: {15}, Process Category: {16}, Rate Type: {17}, Mpu Class: {18}, Number of Pieces: {19}.Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly. · Postage StatementAction: Populate Mail.dat fields according to PostalOne! Technical Specification to map to lines correctly.Error location: Postage Statement7085There are more than one origin entry offices for the CPP permit. There must be only one origin entry office for a mailing with a CPP permit.Populate the .mpa Permit Number with a value that has only one origin entry office for the CPP Permit. · Multiple FilesAction: Populate the .mpa Permit Number with a value that has only one origin entry office for the CPP Permit.Error location: Multiple Files7091For eInduction processing, the .csm Label: IM Container Or IM Tray Barcode field must be unique within the submitted job.Populate the .csm Label: IM Container Or IM Tray Barcode field with a unique value within the submitted job. · Multiple FilesAction: Populate the .csm Label: IM Container Or IM Tray Barcode field with a unique value within the submitted job.Error location: Multiple Files7104For Seamless, the .csm Label: IM Container Or IM Tray Barcode field must contain exactly 21 characters when the .csm Container Type is P = Pallet, H = EIRS 61 – Hamper, Large Canvas, A = EIRS 61P – Hamper, Large Plastic, G = EIRS 66 – General Purpose Mail Container w/Gate D = EIRS 68 – Eastern Region Mail Container w/Web Door, R = EIRS 84 – Wire Container Rigid, C = EIRS 84C – Collapsible Wire Container, Z = User Pallet, AB = Air Box, B = Bedload, U = Unit Load Device or W = Walled Unit. The value provided was {1}.Populate the .csm Label: IM Container Or IM Tray Barcode field with exactly 21 characters when the .csm Container Type is P, H, A, G, D, R, C, Z, AB, B, U, or W. · .csmAction: Populate the .csm Label: IM Container Or IM Tray Barcode field with exactly 21 characters when the .csm Container Type is P, H, A, G, D, R, C, Z, AB, B, U, or W.Error location: .csm7105For Seamless, the .csm Label: IM Container Or IM Tray Barcode field must begin with 99M when the corresponding .csm Container Type is P = Pallet, H = EIRS 61 – Hamper, Large Canvas, A = EIRS 61P – Hamper, Large Plastic, G = EIRS 66 – General Purpose Mail Container w/Gate D = EIRS 68 – Eastern Region Mail Container w/ Web Door, R = EIRS 84 – Wire Container Rigid, = EIRS 84C – Collapsible Wire Container, Z = User Pallet, AB = Air Box, B = Bedload, U = Unit Load Device or W = Walled Unit. The value provided was {1}.Populate the .csm Label: IM Container Or IM Tray Barcode field with a value that begins 99M when the corresponding .csm Container Type is P, H, A, G, D, R, C, Z, AB, B, U, or W. · .csmAction: Populate the .csm Label: IM Container Or IM Tray Barcode field with a value that begins 99M when the corresponding .csm Container Type is P, H, A, G, D, R, C, Z, AB, B, U, or W.Error location: .csm7106For Seamless, the .csm Label: IM Container Or IM Tray Barcode field must be unique within the submitted job and amongst all physical pallets associated to the .seg eDoc Sender CRID value that were finalized within the last 45 days of the Postage Statement Mailing Date.Populate the .csm Label: IM Container Or IM Tray Barcode field with a unique value within the submitted job and amongst all physical pallets associated to the .seg eDoc Sender CRID value that were finalized within the last 45 days of the Postage Statement Mailing Date. · .csmAction: Populate the .csm Label: IM Container Or IM Tray Barcode field with a unique value within the submitted job and amongst all physical pallets associated to the .seg eDoc Sender CRID value that were finalized within the last 45 days of the Postage Statement Mailing Date.Error location: .csm7107For Seamless, the .csm Label: IM Container Or IM Tray Barcode field contains an invalid value; it must contain a 24 character Imtb.Populate the .csm Label: IM Container Or IM Tray Barcode field with a 24 character Imtb. · .csmAction: Populate the .csm Label: IM Container Or IM Tray Barcode field with a 24 character Imtb.Error location: .csm7108For Seamless, the .csm Label: IM Container Or IM Tray Barcode field must be unique within the submitted job and amongst all physical handling units associated to the .seg eDoc Sender CRID value that were finalized within the last 45 days of the Postage Statement Mailing Date.Populate the .csm Label: IM Container Or IM Tray Barcode field with a unique value within the submitted job and amongst all physical handling units associated to the .seg eDoc Sender CRID value that were finalized within the last 45 days of the Postage Statement Mailing Date. · .csm .segAction: Populate the .csm Label: IM Container Or IM Tray Barcode field with a unique value within the submitted job and amongst all physical handling units associated to the .seg eDoc Sender CRID value that were finalized within the last 45 days of the Postage Statement Mailing Date.Error location: .csm .seg7136More than {1} failures for error code: {2}.Multiple FilesError location: Multiple Files7166For Seamless processing, the .pdr IM Barcode must be unique below the configurable threshold ({1}%), when the submission is not setup as a simple mailing, and the .csm Container Status is R = Ready to Pay. The value provided was {2}%.Populate the .pdr IM Barcode field with a value that is unique below the configurable threshold, when the submission is not setup as a simple mailing, and the .csm Container Status is R. · .pdrAction: Populate the .pdr IM Barcode field with a value that is unique below the configurable threshold, when the submission is not setup as a simple mailing, and the .csm Container Status is R.Error location: .pdr7170For Seamless processing the .pbc Barcode must be unique below the configurable threshold ({1}%), when the submission is not setup as a simple mailing. The value provided was {2}.Populate the .pbc Barcode field with a value that is unique below the configurable threshold, when the submission is not setup as a simple mailing. · .pbcAction: Populate the .pbc Barcode field with a value that is unique below the configurable threshold, when the submission is not setup as a simple mailing.Error location: .pbc7172When multiple .mpa records are provided, the associated CRID determined for the provided .mpa Mailer ID of Preparer does not match the associated Mailer ID determined for the provided .mpa CRID of Preparer of another record, when the associated fields are not populated. Only one Mailing Agent can be identified per mailing.If your job identifies a separate .mpa Mailer ID of Preparer and .mpa CRID of Preparer, for all .mpa records, make sure the associated CRID determined for the .mpa Mailer ID of Preparer matches the associated MID determined .mpa CRID of Preparer. · Error location: N/AAction: If your job identifies a separate .mpa Mailer ID of Preparer and .mpa CRID of Preparer, for all .mpa records, make sure the associated CRID determined for the .mpa Mailer ID of Preparer matches the associated MID determined .mpa CRID of Preparer.Error location: N/A7175The CRID {1} of the Permit Holder with the MailPiece Unit Name {2}, Mail Piece Unit ID {3} and Segment ID {4} is not nonprofit authorized.When the .mpu Mail Piece Unit – Rate Type is N = Nonprofit, please provide a nonprofit eligible Mail Owner in one of the following fields; .cpt Mailer ID of Mail Owner, .mpa Mailer ID of Mail Owner, .cpt CRID of Mail Owner, .mpa CRID of Mail Owner, or .mpa Mail Owner Lcl Permit Ref Number/ Int’l Bill Number and .mpa Mail Owner Lcl Permit Ref Number / Int’l Bill Num – Type. · .mpuAction: When the .mpu Mail Piece Unit – Rate Type is N = Nonprofit, please provide a nonprofit eligible Mail Owner in one of the following fields; .cpt Mailer ID of Mail Owner, .mpa Mailer ID of Mail Owner, .cpt CRID of Mail Owner, .mpa CRID of Mail Owner, or .mpa Mail Owner Lcl Permit Ref Number/ Int’l Bill Number and .mpa Mail Owner Lcl Permit Ref Number / Int’l Bill Num – Type.Error location: .mpu7191For {1}, the .pdr IM Barcode must either be 31 characters in length with a 9 or 11-Digit .pdr Piece Barcode or is 31 characters in length or less and the .upa Address must be populated for the corresponding .pdr Piece ID or the .sfr Service Type must be populated with NP for the corresponding .pdr Piece ID.Provide a 31 character IM barcode with a 9 or 11-Digit .pdr Piece Barcode or provide the .upa Address field with corresponding .upa Piece ID or provide the .sfr Service Type of NP with the corresponding .sfr Piece ID. · MultipleAction: Provide a 31 character IM barcode with a 9 or 11-Digit .pdr Piece Barcode or provide the .upa Address field with corresponding .upa Piece ID or provide the .sfr Service Type of NP with the corresponding .sfr Piece ID.Error location: Multiple7200The unique combination of .pdr Piece ID and .pdr CQT Database ID must match the .sfr Piece ID and .sfr CQT Database ID.Populate the .sfr Piece ID and .sfr CQT Database ID to match the .pdr Piece ID and .pdr CQT Database ID. · MultipleAction: Populate the .sfr Piece ID and .sfr CQT Database ID to match the .pdr Piece ID and .pdr CQT Database ID.Error location: Multiple7201The unique combination of .pbc PBC Unique ID and .pbc CQT Database ID must match the combination of .sfr Piece ID and .sfr CQT Database ID.Populate the .sfr Piece ID and .sfr CQT Database ID to match the .pbc PBC Unique ID and .pbc CQT Database ID. · MultipleAction: Populate the .sfr Piece ID and .sfr CQT Database ID to match the .pbc PBC Unique ID and .pbc CQT Database ID.Error location: Multiple7202A postage statement contains mail piece units both with the Picture Permit Imprint Incentive and without. Pieces claiming the Picture Permit Indicia Incentive must be on their own postage statement.Update the .mpa Customer Reference ID or .csm Postage Grouping ID to separate Picture Permit Imprint pieces. · MultipleAction: Update the .mpa Customer Reference ID or .csm Postage Grouping ID to separate Picture Permit Imprint pieces.Error location: Multiple7206The .upa Piece ID must match the .pdr Piece ID or the .pbc PBC Unique IDUpdate the .upa Piece ID field to match the .pdr Piece ID or the .pbc PBC Unique ID. · .upaAction: Update the .upa Piece ID field to match the .pdr Piece ID or the .pbc PBC Unique ID.Error location: .upa7216The .pdr IM Barcode was not populated with an Impb. The .pdr IM Barcode must be populated with an Impb when the .mpu Mail Piece Unit – Class is 1 = First Class, the .mpu Mail Piece Unit – Processing Category is PF = Parcels, First Class, and the .hdr Mail.dat Presentation Category is N = Single Piece.Populate the .pdr IM Barcode with an Impb. · .pdrAction: Populate the .pdr IM Barcode with an Impb.Error location: .pdr7218The Mail Preparer on Update submissions must be the same as the Mail Preparer from the Origin submission.Update the .mpa Mailer ID of Preparer or .mpa CRID of Preparer on the Update submission to match the Origin. If you are attempting to correct the Mail Preparer on an Origin submission, delete the Origin submission, correct the Mail Preparer and resubmit. · .mpaAction: Update the .mpa Mailer ID of Preparer or .mpa CRID of Preparer on the Update submission to match the Origin. If you are attempting to correct the Mail Preparer on an Origin submission, delete the Origin submission, correct the Mail Preparer and resubmit.Error location: .mpa7239The .sfr Service Type Z1 = Adult Signature 21 Required and Z2 = Adult Signature 21 Restricted cannot be claimed together on the same piece.Only claim .sfr Service Type Z1 or Z2 on an individual piece. · .sfrAction: Only claim .sfr Service Type Z1 or Z2 on an individual piece.Error location: .sfr7240The .sfr Service Type H = Return Receipt (Electronic) and HM = Return Receipt (Form 3811) cannot be claimed together on the same piece.Only claim .sfr Service Type H or HM on an individual piece. · .sfrAction: Only claim .sfr Service Type H or HM on an individual piece.Error location: .sfr7241The Picture Permit extra service fee should not be claimed within both the .ccr file and the .sfr file.Only attempt to claim Picture Permit extra service within the .sfr file. · .sfrAction: Only attempt to claim Picture Permit extra service within the .sfr file.Error location: .sfr7243The .sfr Service Type E = Insured and H = Return Receipt (Electronic) cannot be claimed together on the same piece when the Insured .sfr Service Stated Value is greater than $500.Only claim the .sfr Service Type of E and H on the same piece when the Insured .sfr Service Stated value is less than $500. · .sfrAction: Only claim the .sfr Service Type of E and H on the same piece when the Insured .sfr Service Stated value is less than $500.Error location: .sfr7244In an update submission, the primary key of the {1} file cannot be updated, {2}.Do not attempt to update a primary key of a file in an update submission. · Multiple filesAction: Do not attempt to update a primary key of a file in an update submission.Error location: Multiple files7253The .ccr Characteristic of SB cannot be claimed on a single postage statement with .ccr Characteristics of IT, ME, MI, CP, CR, or SS.ccrError location: .ccr7257When the .rmr file is present and no barcode data is provided, either the .cpt Mailer ID of Mail Owner or the .mpa Mailer ID of Mail Owner must be populated with a valid value.Populate either the .cpt Mailer ID of Mail Owner or the .mpa Mailer ID of Mail Owner. · Multiple filesAction: Populate either the .cpt Mailer ID of Mail Owner or the .mpa Mailer ID of Mail Owner.Error location: Multiple files7283When the .seg Detached Mailing Label Indicator field is populated with a value other than C = Plus One with Flats for Postage Statement {1} the total .cqt Number of Pieces that claimed .cqt Rate Category PO = Plus One cannot exceed the total that claimed PS 3602 Carrier Route Letter DSCF Saturation, High Density and High Density Plus (.mpu Processing Category LT = Letter, .cqt Destination Entry S = DSCF, and .cqt Rate Category A = Saturation - ECR or C = High Density Plus - ECR or B = High Density - ECR).Multiple filesError location: Multiple files7284When the .seg Detached Mailing Label Indicator field is populated with a value other than C = Plus One with Flats for Postage Statement {1} the total .cqt Number of Pieces that claimed PS 3602 Carrier Route Letter DSCF Saturation (.mpu Processing Category LT = Letter, .cqt Destination Entry S = DSCF, and .cqt Rate Category A = Saturation - ECR) must meet or exceed 90% of the total that claimed .cqt Rate Category PO = Plus One. The current percentage is {2}.Multiple filesError location: Multiple files7285A .sfr Service Type L1 = Nonstandard Fee if dimension is within first *defined range (inches) was not provided when the .mpu Mail Piece Unit - Length, .mpu Mail Piece Unit - Width or Mail Piece Unit - Thickness is greater than {1}" and less than or equal to {2}".Provide a .sfr Service Type L1. · Multiple filesAction: Provide a .sfr Service Type L1.Error location: Multiple files7286A .sfr Service Type L2 = Nonstandard Fee if dimension is within second *defined range (inches) was not provided when the .mpu Mail Piece Unit - Length, .mpu Mail Piece Unit - Width or Mail Piece Unit - Thickness is greater than {1}".Provide a .sfr Service Type L2. · Multiple filesAction: Provide a .sfr Service Type L2.Error location: Multiple files7287A .sfr Service Type L4 = Nonstandard Fee if Package Volume is within *defined range (cu. Ft.) was not provided when the .mpu Mail Piece Unit - Length x .mpu Mail Piece Unit - Width x Mail Piece Unit - Thickness is greater than {1} cu. Ft.Provide a .sfr Service Type L4. · Multiple filesAction: Provide a .sfr Service Type L4.Error location: Multiple files7288For .mpu Mail Piece Unit - Class 1 = First class and .mpu Mail Piece Unit - Processing Category LT = Letter or FL = Flat a piece which claims .sfr Service Type B2 = USPS Tracking Plus - Scan Retention or B3 = USPS Tracking Plus - Scan + Signature Retention also must claim .sfr Service Type D = Certified Mail.Provide .sfr Service Type D. · .pdr or .pbcAction: Provide .sfr Service Type D.Error location: .pdr or .pbc7289For an Informed Delivery Campaign, when the .rms Campaign Serial Grouping is populated with S, then a valid .cpt or .mpa Mailer ID of Mail Owner must be provided.Populate the .cpt or .mpa Mailer ID of Mail Owner with a valid MID. · Multiple filesAction: Populate the .cpt or .mpa Mailer ID of Mail Owner with a valid MID.Error location: Multiple files7301The .seg Mailing Agreement Type field value provided was {1}; it cannot contain G or H.Populate the .seg Mailing Agreement Type field with A, B, D, E, or F when populated.Action: Populate the .seg Mailing Agreement Type field with A, B, D, E, or F when populated.7304The ZIP portion of the IM package Barcode in the .pdr IM Barcode field is {1}. When the .mpu Mail Piece Unit – Weight is greater than or equal to 1lb and destinated to a military ZIP the mail piece cannot be submitted through Mail.dat.Remove the mail piece from the eDoc and submit via Click-N-Ship. · Multiple filesAction: Remove the mail piece from the eDoc and submit via Click-N-Ship.Error location: Multiple files7324The .ccr Promotion Approval Code field can only be populated when the .ccr Characteristic field is populated with DD = Direct Mail Discovery. The value provided was {1}.Populate the .ccr Promotion Approval Code field when the .ccr Characteristic field is populated with DD. · .ccrAction: Populate the .ccr Promotion Approval Code field when the .ccr Characteristic field is populated with DD.Error location: .ccr